ST / stm-spirit1-rf-driver

Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

libs/Contiki_STM32_Library/hw-config.h@0:4fb29d9ee571, 2016-10-13 (annotated)

Committer:
Wolfgang Betz
Date:
Thu Oct 13 15:41:39 2016 +0200
Revision:
0:4fb29d9ee571
First compiling version (without warnings)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Wolfgang Betz 0:4fb29d9ee571 1 /**
Wolfgang Betz 0:4fb29d9ee571 2 ******************************************************************************
Wolfgang Betz 0:4fb29d9ee571 3 * @file hw-config.h
Wolfgang Betz 0:4fb29d9ee571 4 * @author System LAB
Wolfgang Betz 0:4fb29d9ee571 5 * @version V1.0.0
Wolfgang Betz 0:4fb29d9ee571 6 * @date 17-May-2015
Wolfgang Betz 0:4fb29d9ee571 7 * @brief Header file for Hardware Configuration & Setup
Wolfgang Betz 0:4fb29d9ee571 8 ******************************************************************************
Wolfgang Betz 0:4fb29d9ee571 9 * @attention
Wolfgang Betz 0:4fb29d9ee571 10 *
Wolfgang Betz 0:4fb29d9ee571 11 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
Wolfgang Betz 0:4fb29d9ee571 12 *
Wolfgang Betz 0:4fb29d9ee571 13 * Redistribution and use in source and binary forms, with or without modification,
Wolfgang Betz 0:4fb29d9ee571 14 * are permitted provided that the following conditions are met:
Wolfgang Betz 0:4fb29d9ee571 15 * 1. Redistributions of source code must retain the above copyright notice,
Wolfgang Betz 0:4fb29d9ee571 16 * this list of conditions and the following disclaimer.
Wolfgang Betz 0:4fb29d9ee571 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
Wolfgang Betz 0:4fb29d9ee571 18 * this list of conditions and the following disclaimer in the documentation
Wolfgang Betz 0:4fb29d9ee571 19 * and/or other materials provided with the distribution.
Wolfgang Betz 0:4fb29d9ee571 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
Wolfgang Betz 0:4fb29d9ee571 21 * may be used to endorse or promote products derived from this software
Wolfgang Betz 0:4fb29d9ee571 22 * without specific prior written permission.
Wolfgang Betz 0:4fb29d9ee571 23 *
Wolfgang Betz 0:4fb29d9ee571 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
Wolfgang Betz 0:4fb29d9ee571 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
Wolfgang Betz 0:4fb29d9ee571 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
Wolfgang Betz 0:4fb29d9ee571 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
Wolfgang Betz 0:4fb29d9ee571 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
Wolfgang Betz 0:4fb29d9ee571 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
Wolfgang Betz 0:4fb29d9ee571 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
Wolfgang Betz 0:4fb29d9ee571 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
Wolfgang Betz 0:4fb29d9ee571 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
Wolfgang Betz 0:4fb29d9ee571 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Wolfgang Betz 0:4fb29d9ee571 34 *
Wolfgang Betz 0:4fb29d9ee571 35 ******************************************************************************
Wolfgang Betz 0:4fb29d9ee571 36 */
Wolfgang Betz 0:4fb29d9ee571 37 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 38 #ifndef __HW_CONFIG_H
Wolfgang Betz 0:4fb29d9ee571 39 #define __HW_CONFIG_H
Wolfgang Betz 0:4fb29d9ee571 40 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 41 #include "stm32l-spirit1-config.h"
Wolfgang Betz 0:4fb29d9ee571 42 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 43 #define UART_RxBufferSize 512
Wolfgang Betz 0:4fb29d9ee571 44 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 45 #define I2Cx I2C1
Wolfgang Betz 0:4fb29d9ee571 46 #define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 47 #define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 48 #define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 49 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 50 #define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET()
Wolfgang Betz 0:4fb29d9ee571 51 #define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET()
Wolfgang Betz 0:4fb29d9ee571 52 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 53 /* Definition for I2Cx Pins */
Wolfgang Betz 0:4fb29d9ee571 54 #define I2Cx_SCL_PIN GPIO_PIN_8
Wolfgang Betz 0:4fb29d9ee571 55 #define I2Cx_SCL_GPIO_PORT GPIOB
Wolfgang Betz 0:4fb29d9ee571 56 #define I2Cx_SDA_PIN GPIO_PIN_9
Wolfgang Betz 0:4fb29d9ee571 57 #define I2Cx_SDA_GPIO_PORT GPIOB
Wolfgang Betz 0:4fb29d9ee571 58 #define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
Wolfgang Betz 0:4fb29d9ee571 59
Wolfgang Betz 0:4fb29d9ee571 60 /* Definition for I2Cx's NVIC */
Wolfgang Betz 0:4fb29d9ee571 61 #define I2Cx_EV_IRQn I2C1_EV_IRQn
Wolfgang Betz 0:4fb29d9ee571 62 #define I2Cx_ER_IRQn I2C1_ER_IRQn
Wolfgang Betz 0:4fb29d9ee571 63 #define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler
Wolfgang Betz 0:4fb29d9ee571 64 #define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler
Wolfgang Betz 0:4fb29d9ee571 65
Wolfgang Betz 0:4fb29d9ee571 66
Wolfgang Betz 0:4fb29d9ee571 67 #define I2Cx I2C1
Wolfgang Betz 0:4fb29d9ee571 68 #define I2Cx_CLK_ENABLE() __I2C1_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 69 #define I2Cx_SDA_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 70 #define I2Cx_SCL_GPIO_CLK_ENABLE() __GPIOB_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 71
Wolfgang Betz 0:4fb29d9ee571 72 #define I2Cx_FORCE_RESET() __I2C1_FORCE_RESET()
Wolfgang Betz 0:4fb29d9ee571 73 #define I2Cx_RELEASE_RESET() __I2C1_RELEASE_RESET()
Wolfgang Betz 0:4fb29d9ee571 74
Wolfgang Betz 0:4fb29d9ee571 75 /* Definition for I2Cx Pins */
Wolfgang Betz 0:4fb29d9ee571 76 #define I2Cx_SCL_PIN GPIO_PIN_8
Wolfgang Betz 0:4fb29d9ee571 77 #define I2Cx_SCL_GPIO_PORT GPIOB
Wolfgang Betz 0:4fb29d9ee571 78 #define I2Cx_SDA_PIN GPIO_PIN_9
Wolfgang Betz 0:4fb29d9ee571 79 #define I2Cx_SDA_GPIO_PORT GPIOB
Wolfgang Betz 0:4fb29d9ee571 80 #define I2Cx_SCL_SDA_AF GPIO_AF4_I2C1
Wolfgang Betz 0:4fb29d9ee571 81
Wolfgang Betz 0:4fb29d9ee571 82 /* Definition for I2Cx's NVIC */
Wolfgang Betz 0:4fb29d9ee571 83 #define I2Cx_EV_IRQn I2C1_EV_IRQn
Wolfgang Betz 0:4fb29d9ee571 84 #define I2Cx_ER_IRQn I2C1_ER_IRQn
Wolfgang Betz 0:4fb29d9ee571 85 #define I2Cx_EV_IRQHandler I2C1_EV_IRQHandler
Wolfgang Betz 0:4fb29d9ee571 86 #define I2Cx_ER_IRQHandler I2C1_ER_IRQHandler
Wolfgang Betz 0:4fb29d9ee571 87
Wolfgang Betz 0:4fb29d9ee571 88 /* User can use this section to tailor USARTx/UARTx instance used and associated
Wolfgang Betz 0:4fb29d9ee571 89 resources */
Wolfgang Betz 0:4fb29d9ee571 90 /* Definition for USARTx clock resources */
Wolfgang Betz 0:4fb29d9ee571 91 #define USARTx USART2
Wolfgang Betz 0:4fb29d9ee571 92 #define USARTx_CLK_ENABLE() __USART2_CLK_ENABLE();
Wolfgang Betz 0:4fb29d9ee571 93 #define DMAx_CLK_ENABLE() __DMA1_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 94 #define USARTx_RX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 95 #define USARTx_TX_GPIO_CLK_ENABLE() __GPIOA_CLK_ENABLE()
Wolfgang Betz 0:4fb29d9ee571 96
Wolfgang Betz 0:4fb29d9ee571 97 #define USARTx_FORCE_RESET() __USART2_FORCE_RESET()
Wolfgang Betz 0:4fb29d9ee571 98 #define USARTx_RELEASE_RESET() __USART2_RELEASE_RESET()
Wolfgang Betz 0:4fb29d9ee571 99
Wolfgang Betz 0:4fb29d9ee571 100 /* Definition for USARTx Pins */
Wolfgang Betz 0:4fb29d9ee571 101 #define USARTx_TX_PIN GPIO_PIN_2
Wolfgang Betz 0:4fb29d9ee571 102 #define USARTx_TX_GPIO_PORT GPIOA
Wolfgang Betz 0:4fb29d9ee571 103
Wolfgang Betz 0:4fb29d9ee571 104 #define USARTx_RX_PIN GPIO_PIN_3
Wolfgang Betz 0:4fb29d9ee571 105 #define USARTx_RX_GPIO_PORT GPIOA
Wolfgang Betz 0:4fb29d9ee571 106
Wolfgang Betz 0:4fb29d9ee571 107 /* Definition for USARTx's NVIC */
Wolfgang Betz 0:4fb29d9ee571 108 #define USARTx_IRQn USART2_IRQn
Wolfgang Betz 0:4fb29d9ee571 109 #define USARTx_IRQHandler USART2_IRQHandler
Wolfgang Betz 0:4fb29d9ee571 110
Wolfgang Betz 0:4fb29d9ee571 111 #define USARTx_TX_AF GPIO_AF7_USART2
Wolfgang Betz 0:4fb29d9ee571 112 #define USARTx_RX_AF GPIO_AF7_USART2
Wolfgang Betz 0:4fb29d9ee571 113
Wolfgang Betz 0:4fb29d9ee571 114
Wolfgang Betz 0:4fb29d9ee571 115 /* Enable sensor mask */
Wolfgang Betz 0:4fb29d9ee571 116 #define PRESSURE_SENSOR 0x00000001
Wolfgang Betz 0:4fb29d9ee571 117 #define TEMPERATURE_SENSOR 0x00000002
Wolfgang Betz 0:4fb29d9ee571 118 #define HUMIDITY_SENSOR 0x00000004
Wolfgang Betz 0:4fb29d9ee571 119 #define UV_SENSOR 0x00000008
Wolfgang Betz 0:4fb29d9ee571 120 #define ACCELEROMETER_SENSOR 0x00000010
Wolfgang Betz 0:4fb29d9ee571 121 #define GYROSCOPE_SENSOR 0x00000020
Wolfgang Betz 0:4fb29d9ee571 122 #define MAGNETIC_SENSOR 0x00000040
Wolfgang Betz 0:4fb29d9ee571 123 /*---------------------------------------------------------------------------*/
Wolfgang Betz 0:4fb29d9ee571 124 #endif /*__HW_CONFIG_H*/
Wolfgang Betz 0:4fb29d9ee571 125 /*---------------------------------------------------------------------------*/