Prototype RF driver for STM Sub-1 GHz RF expansion board based on the SPSGRF-868 module for STM32 Nucleo.

Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 and SPSGRF-915 Modules for STM32 Nucleo

Currently supported boards:

Note, in order to use expansion board X-NUCLEO-IDS01A4 in mbed you need to perform the following HW modifications on the board:

  • Unmount resistor R4
  • Mount resistor R7

Furthermore, on some Nucleo development boards (e.g. the NUCLEO_F429ZI), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro SPIRIT1_SPI_MOSI=PB_5 defined, while the development board typically requires some HW modification as e.g. described here!

This driver can be used together with the 6LoWPAN stack (a.k.a. Nanostack).

Revision:
67:93bec0baf1de
Parent:
34:edda6a7238ec
diff -r 1e09d233280b -r 93bec0baf1de source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h
--- a/source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h	Wed Jul 05 14:02:16 2017 +0200
+++ b/source/libs/spirit1/X-NUCLEO-IDS01Ax/radio_shield_config.h	Thu Jul 06 11:13:31 2017 +0200
@@ -1,120 +1,120 @@
-/**
-******************************************************************************
-* @file    radio_shield_config.h
-* @author  System Lab - NOIDA
-* @version V1.0.0
-* @date    15-May-2014
-* @brief   This file contains definitions for:
-*          - LEDs and push-button available on RF shields
-******************************************************************************
-* @attention
-*
-* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*   1. Redistributions of source code must retain the above copyright notice,
-*      this list of conditions and the following disclaimer.
-*   2. Redistributions in binary form must reproduce the above copyright notice,
-*      this list of conditions and the following disclaimer in the documentation
-*      and/or other materials provided with the distribution.
-*   3. Neither the name of STMicroelectronics nor the names of its contributors
-*      may be used to endorse or promote products derived from this software
-*       without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************
-*/ 
-  
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __RADIO_SHIELD_CONFIG_H
-#define __RADIO_SHIELD_CONFIG_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#ifdef USE_STM32L1XX_NUCLEO
-// #include "stm32l1xx_hal.h"
-#endif
-
-#ifdef USE_STM32F4XX_NUCLEO
-// #include "stm32f4xx_hal.h"
-#endif
-
-/** @addtogroup BSP
-  * @{
-  */
-
-/** @addtogroup X-NUCLEO-IDS02Ax
-  * @{
-  */
-
-/** @addtogroup RADIO_SHILED_LOW_LEVEL
-  * @{
-  */   
-   
-/* Exported types ------------------------------------------------------------*/
-typedef enum 
-{
-  RADIO_SHIELD_LED = 0
-} Led_t;
- 
-
-
-/* Exported constants --------------------------------------------------------*/
-
-
-/* Exported macro ------------------------------------------------------------*/
- /** @addtogroup RF_SHIELD_CONFIG_LOW_LEVEL_LED
- * @{
- */
-#define RADIO_SHIELD_LEDn                               ((uint8_t)1)
-
-#define RADIO_SHIELD_LED_GPIO_PIN                      GPIO_PIN_4                         /*Rx Indicator LED*/
-#define RADIO_SHIELD_LED_GPIO_PORT                     GPIOB
-#define RADIO_SHIELD_LED_GPIO_CLK_ENABLE()           __GPIOB_CLK_ENABLE()  
-#define RADIO_SHIELD_LED_GPIO_CLK_DISABLE()          __GPIOB_CLK_DISABLE()
-
-
-/* Exported Variables ------------------------------------------------------------*/
-
-
-/* Exported functions ------------------------------------------------------- */
-void RadioShieldLedInit(Led_t Led);
-void RadioShieldLedOn(Led_t Led);
-void RadioShieldLedOff(Led_t Led);
-void RadioShieldLedToggle(Led_t Led);                 
-                
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __RADIO_SHIELD_CONFIG_H */
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-    
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+******************************************************************************
+* @file    radio_shield_config.h
+* @author  System Lab - NOIDA
+* @version V1.0.0
+* @date    15-May-2014
+* @brief   This file contains definitions for:
+*          - LEDs and push-button available on RF shields
+******************************************************************************
+* @attention
+*
+* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+*   1. Redistributions of source code must retain the above copyright notice,
+*      this list of conditions and the following disclaimer.
+*   2. Redistributions in binary form must reproduce the above copyright notice,
+*      this list of conditions and the following disclaimer in the documentation
+*      and/or other materials provided with the distribution.
+*   3. Neither the name of STMicroelectronics nor the names of its contributors
+*      may be used to endorse or promote products derived from this software
+*       without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/ 
+  
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __RADIO_SHIELD_CONFIG_H
+#define __RADIO_SHIELD_CONFIG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#ifdef USE_STM32L1XX_NUCLEO
+// #include "stm32l1xx_hal.h"
+#endif
+
+#ifdef USE_STM32F4XX_NUCLEO
+// #include "stm32f4xx_hal.h"
+#endif
+
+/** @addtogroup BSP
+  * @{
+  */
+
+/** @addtogroup X-NUCLEO-IDS02Ax
+  * @{
+  */
+
+/** @addtogroup RADIO_SHILED_LOW_LEVEL
+  * @{
+  */   
+   
+/* Exported types ------------------------------------------------------------*/
+typedef enum 
+{
+  RADIO_SHIELD_LED = 0
+} Led_t;
+ 
+
+
+/* Exported constants --------------------------------------------------------*/
+
+
+/* Exported macro ------------------------------------------------------------*/
+ /** @addtogroup RF_SHIELD_CONFIG_LOW_LEVEL_LED
+ * @{
+ */
+#define RADIO_SHIELD_LEDn                               ((uint8_t)1)
+
+#define RADIO_SHIELD_LED_GPIO_PIN                      GPIO_PIN_4                         /*Rx Indicator LED*/
+#define RADIO_SHIELD_LED_GPIO_PORT                     GPIOB
+#define RADIO_SHIELD_LED_GPIO_CLK_ENABLE()           __GPIOB_CLK_ENABLE()  
+#define RADIO_SHIELD_LED_GPIO_CLK_DISABLE()          __GPIOB_CLK_DISABLE()
+
+
+/* Exported Variables ------------------------------------------------------------*/
+
+
+/* Exported functions ------------------------------------------------------- */
+void RadioShieldLedInit(Led_t Led);
+void RadioShieldLedOn(Led_t Led);
+void RadioShieldLedOff(Led_t Led);
+void RadioShieldLedToggle(Led_t Led);                 
+                
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __RADIO_SHIELD_CONFIG_H */
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+    
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+