Mbed OS and Pelion Device Management example over WIFI for DISCO_L475VG_IOT01 board

Dependencies:   X_NUCLEO_COMMON ST_INTERFACES

DEPRECATED

This example application is not maintained and not recommended. It uses an old version of Mbed OS, Pelion DM and Arm toolchain. It doesn't work with Mbed Studio.

Please use: https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-pelion/

This example is known to work on the following platforms:

DISCO_L475E_IOT01A

Follow the Quick-Start instructions: https://cloud.mbed.com/quick-start

Example functionality

This example showcases the following device functionality:

  • Read onboard temperature and humidity sensors, and report them as Pelion LWM2M resources (see image below).
  • On user button click, increment Pelion LWM2M button resource.
  • Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.
  • Uses all onboard sensors and reports them as Pelion LWM2M resources.

/media/uploads/screamer/pelion_st_humidity_reading.png?v=2

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import https://os.mbed.com/teams/ST/code/pelion-example-disco-iot01

cd pelion-example-disco-iot01

2. Install the CLOUD_SDK_API_KEY

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command:

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.

4. Compile and program:

mbed compile -t <toolchain> -m DISCO_L475VG_IOT01A

(supported toolchains : GCC_ARM / ARM / IAR)

5. You can connect on a virtual terminal/COM port to the platform using:

mbed sterm -b 115200

This should give you an output similar to:

[BOOT] Mbed Bootloader
[BOOT] ARM: 00000000000000000000
[BOOT] OEM: 00000000000000000000
[BOOT] Layout: 0 80096F4
[BOOT] Active firmware integrity check:
[BOOT] SHA256: 0660E360D432225D5251461998FD8617B017098C5F1F90D5FB607BF8C27ED530
[BOOT] Version: 1553615309
[BOOT] Slot 0 is empty
[BOOT] Active firmware up-to-date
[BOOT] Application's start address: 0x8010400
[BOOT] Application's jump address: 0x8011041
[BOOT] Application's stack address: 0x20018000
[BOOT] Forwarding to application...

Starting Simple Pelion Device Management Client example
You can hold the user button during boot to format the storage and change the device identity.

Sensors configuration:
Invalid new address!
HTS221  humidity & temperature    = 0xBC
LPS22HB pressure & temperature    = 0xB1
LIS3MDL magnetometer              = 0x3D
LSM6DSL accelerometer & gyroscope = 0x6A

Connecting to the network using Wifi...
Connected to the network successfully. IP address: 192.168.1.3
Initializing Pelion Device Management Client...
Initialized Pelion Client. Registering...
Registered to Pelion Device Management. Endpoint Name: 0169********************001002d5

ADC temp:     23.0037 C,  vref:      0.3661 V
HTS221 temp:   28.700 C,  humidity:   31.90 %
LPS22HB temp:  29.600 C,  pressure: 1032.01 mbar
LIS3MDL mag:    0.217 x,  -0.284 y,  -0.053 z [gauss]
LSM6DSL acc:    0.005 x,  -0.014 y,   1.029 z [g]
LSM6DSL gyro:   0.910 x,  -0.910 y,   1.120 z [dps]
VL53L0X dist:    1855 mm

drivers/storage/MySystemStorage.cpp

Committer:
screamer
Date:
2019-03-11
Revision:
31:da14aa77f977
Parent:
10:b27c962b3c3f

File content as of revision 31:da14aa77f977:

/*
 * Copyright (c) 2018 ARM Limited. All rights reserved.
 * SPDX-License-Identifier: Apache-2.0
 * Licensed under the Apache License, Version 2.0 (the License); you may
 * not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an AS IS BASIS, WITHOUT
 * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "BlockDevice.h"
#include "FileSystem.h"
#include "FATFileSystem.h"
#include "LittleFileSystem.h"

#if COMPONENT_SPIF
#include "SPIFBlockDevice.h"
#endif

#if COMPONENT_QSPIF
#include "QSPIFBlockDevice.h"
#endif

#if COMPONENT_DATAFLASH
#include "DataFlashBlockDevice.h"
#endif

#if COMPONENT_SD
#include "SDBlockDevice.h"
#endif

#if COMPONENT_FLASHIAP
#include "FlashIAPBlockDevice.h"
#endif

#if COMPONENT_NUSD
#include "NuSDBlockDevice.h"
#endif

using namespace mbed;

// Align a value to a specified size.
// Parameters :
// val           - [IN]   Value.
// size          - [IN]   Size.
// Return        : Aligned value.
static inline uint32_t align_up(uint32_t val, uint32_t size)
{
    return (((val - 1) / size) + 1) * size;
}

BlockDevice *BlockDevice::get_default_instance()
{
#if COMPONENT_SPIF

    static SPIFBlockDevice default_bd(
        MBED_CONF_SPIF_DRIVER_SPI_MOSI,
        MBED_CONF_SPIF_DRIVER_SPI_MISO,
        MBED_CONF_SPIF_DRIVER_SPI_CLK,
        MBED_CONF_SPIF_DRIVER_SPI_CS,
        MBED_CONF_SPIF_DRIVER_SPI_FREQ
    );

    return &default_bd;

#elif COMPONENT_QSPIF

    static QSPIFBlockDevice default_bd(
        MBED_CONF_QSPIF_QSPI_IO0,
        MBED_CONF_QSPIF_QSPI_IO1,
        MBED_CONF_QSPIF_QSPI_IO2,
        MBED_CONF_QSPIF_QSPI_IO3,
        MBED_CONF_QSPIF_QSPI_SCK,
        MBED_CONF_QSPIF_QSPI_CSN,
        MBED_CONF_QSPIF_QSPI_POLARITY_MODE,
        MBED_CONF_QSPIF_QSPI_FREQ
    );

    return &default_bd;

#elif COMPONENT_DATAFLASH

    static DataFlashBlockDevice default_bd(
        MBED_CONF_DATAFLASH_SPI_MOSI,
        MBED_CONF_DATAFLASH_SPI_MISO,
        MBED_CONF_DATAFLASH_SPI_CLK,
        MBED_CONF_DATAFLASH_SPI_CS
    );

    return &default_bd;

#elif COMPONENT_SD

    static SDBlockDevice default_bd(
        MBED_CONF_SD_SPI_MOSI,
        MBED_CONF_SD_SPI_MISO,
        MBED_CONF_SD_SPI_CLK,
        MBED_CONF_SD_SPI_CS
    );

    return &default_bd;

#elif COMPONENT_NUSD

    static NuSDBlockDevice default_bd;

    return &default_bd;

#elif COMPONENT_FLASHIAP

#if (MBED_CONF_FLASHIAP_BLOCK_DEVICE_SIZE == 0) && (MBED_CONF_FLASHIAP_BLOCK_DEVICE_BASE_ADDRESS == 0xFFFFFFFF)

    size_t flash_size;
    uint32_t start_address;
    uint32_t bottom_address;
    FlashIAP flash;

    int ret = flash.init();
    if (ret != 0) {
        return 0;
    }

    //Find the start of first sector after text area
    bottom_address = align_up(FLASHIAP_ROM_END, flash.get_sector_size(FLASHIAP_ROM_END));
    start_address = flash.get_flash_start();
    flash_size = flash.get_flash_size();

    ret = flash.deinit();

    static FlashIAPBlockDevice default_bd(bottom_address, start_address + flash_size - bottom_address);

#else

    static FlashIAPBlockDevice default_bd;

#endif

    return &default_bd;

#else

    return NULL;

#endif

}

FileSystem *FileSystem::get_default_instance()
{
#if COMPONENT_SPIF || COMPONENT_QSPIF || COMPONENT_DATAFLASH || COMPONENT_NUSD

    static LittleFileSystem flash("flash", BlockDevice::get_default_instance());
    flash.set_as_default();

    return &flash;

#elif COMPONENT_SD

    static FATFileSystem sdcard("sd", BlockDevice::get_default_instance());
    sdcard.set_as_default();

    return &sdcard;

#elif COMPONENT_FLASHIAP

    static LittleFileSystem flash("flash", BlockDevice::get_default_instance());
    flash.set_as_default();

    return &flash;

#else

    return NULL;

#endif

}