pelion-example-disco-iot01 - Mbed OS and Pelion Device Management example over…

ST » Code » pelion-example-disco-iot01

Mbed OS and Pelion Device Management example over WIFI for DISCO_L475VG_IOT01 board

Dependencies: X_NUCLEO_COMMON ST_INTERFACES

DEPRECATED

This example application is not maintained and not recommended. It uses an old version of Mbed OS, Pelion DM and Arm toolchain. It doesn't work with Mbed Studio.

Please use: https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-pelion/

This example is known to work on the following platforms:

DISCO_L475E_IOT01A over WiFI and using onboard QSPI flash.

DISCO_L475E_IOT01A

Follow the Quick-Start instructions: https://cloud.mbed.com/quick-start

Example functionality

This example showcases the following device functionality:

Read onboard temperature and humidity sensors, and report them as Pelion LWM2M resources (see image below).
On user button click, increment Pelion LWM2M button resource.
Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.
Uses all onboard sensors and reports them as Pelion LWM2M resources.

/media/uploads/screamer/pelion_st_humidity_reading.png?v=2

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import https://os.mbed.com/teams/ST/code/pelion-example-disco-iot01

cd pelion-example-disco-iot01

2. Install the CLOUD_SDK_API_KEY

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command:

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.

4. Compile and program:

mbed compile -t <toolchain> -m DISCO_L475VG_IOT01A

(supported toolchains : GCC_ARM / ARM / IAR)

5. You can connect on a virtual terminal/COM port to the platform using:

mbed sterm -b 115200

This should give you an output similar to:

[BOOT] Mbed Bootloader
[BOOT] ARM: 00000000000000000000
[BOOT] OEM: 00000000000000000000
[BOOT] Layout: 0 80096F4
[BOOT] Active firmware integrity check:
[BOOT] SHA256: 0660E360D432225D5251461998FD8617B017098C5F1F90D5FB607BF8C27ED530
[BOOT] Version: 1553615309
[BOOT] Slot 0 is empty
[BOOT] Active firmware up-to-date
[BOOT] Application's start address: 0x8010400
[BOOT] Application's jump address: 0x8011041
[BOOT] Application's stack address: 0x20018000
[BOOT] Forwarding to application...

Starting Simple Pelion Device Management Client example
You can hold the user button during boot to format the storage and change the device identity.

Sensors configuration:
Invalid new address!
HTS221  humidity & temperature    = 0xBC
LPS22HB pressure & temperature    = 0xB1
LIS3MDL magnetometer              = 0x3D
LSM6DSL accelerometer & gyroscope = 0x6A

Connecting to the network using Wifi...
Connected to the network successfully. IP address: 192.168.1.3
Initializing Pelion Device Management Client...
Initialized Pelion Client. Registering...
Registered to Pelion Device Management. Endpoint Name: 0169********************001002d5

ADC temp:     23.0037 C,  vref:      0.3661 V
HTS221 temp:   28.700 C,  humidity:   31.90 %
LPS22HB temp:  29.600 C,  pressure: 1032.01 mbar
LIS3MDL mag:    0.217 x,  -0.284 y,  -0.053 z [gauss]
LSM6DSL acc:    0.005 x,  -0.014 y,   1.029 z [g]
LSM6DSL gyro:   0.910 x,  -0.910 y,   1.120 z [dps]
VL53L0X dist:    1855 mm

update_default_resources.c@22:d0acfe03946c, 2018-12-16 (annotated)

Committer:: screamer
Date:: Sun Dec 16 13:59:57 2018 +0000
Revision:: 22:d0acfe03946c
Parent:: 10:b27c962b3c3f

Fix uncommitted changes

Who changed what in which revision?

User	Revision	Line number	New contents of line
adustm	4:cf7342047b4d	1	// ----------------------------------------------------------------------------
MarceloSalazar	9:265744785d33	2	// Copyright 2016-2017 ARM Ltd.
adustm	4:cf7342047b4d	3	//
adustm	4:cf7342047b4d	4	// SPDX-License-Identifier: Apache-2.0
adustm	4:cf7342047b4d	5	//
adustm	4:cf7342047b4d	6	// Licensed under the Apache License, Version 2.0 (the "License");
adustm	4:cf7342047b4d	7	// you may not use this file except in compliance with the License.
adustm	4:cf7342047b4d	8	// You may obtain a copy of the License at
adustm	4:cf7342047b4d	9	//
adustm	4:cf7342047b4d	10	// http://www.apache.org/licenses/LICENSE-2.0
adustm	4:cf7342047b4d	11	//
adustm	4:cf7342047b4d	12	// Unless required by applicable law or agreed to in writing, software
adustm	4:cf7342047b4d	13	// distributed under the License is distributed on an "AS IS" BASIS,
adustm	4:cf7342047b4d	14	// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
adustm	4:cf7342047b4d	15	// See the License for the specific language governing permissions and
adustm	4:cf7342047b4d	16	// limitations under the License.
adustm	4:cf7342047b4d	17	// ----------------------------------------------------------------------------
screamer	10:b27c962b3c3f	18
adustm	4:cf7342047b4d	19	#ifdef MBED_CLOUD_CLIENT_USER_CONFIG_FILE
adustm	4:cf7342047b4d	20	#include MBED_CLOUD_CLIENT_USER_CONFIG_FILE
adustm	4:cf7342047b4d	21	#endif
screamer	10:b27c962b3c3f	22
adustm	4:cf7342047b4d	23	#include <stdint.h>
screamer	10:b27c962b3c3f	24
adustm	4:cf7342047b4d	25	#ifdef MBED_CLOUD_DEV_UPDATE_ID
adustm	4:cf7342047b4d	26	const uint8_t arm_uc_vendor_id[16] = { "dev_manufacturer" };
adustm	4:cf7342047b4d	27	const uint16_t arm_uc_vendor_id_size = sizeof(arm_uc_vendor_id);
screamer	10:b27c962b3c3f	28
adustm	4:cf7342047b4d	29	const uint8_t arm_uc_class_id[16] = { "dev_model_number" };
adustm	4:cf7342047b4d	30	const uint16_t arm_uc_class_id_size = sizeof(arm_uc_class_id);
adustm	4:cf7342047b4d	31	#endif
screamer	10:b27c962b3c3f	32
adustm	4:cf7342047b4d	33	#ifdef MBED_CLOUD_DEV_UPDATE_CERT
adustm	4:cf7342047b4d	34	const uint8_t arm_uc_default_fingerprint[32] = { 0 };
adustm	4:cf7342047b4d	35	const uint16_t arm_uc_default_fingerprint_size =
adustm	4:cf7342047b4d	36	sizeof(arm_uc_default_fingerprint);
screamer	10:b27c962b3c3f	37
adustm	4:cf7342047b4d	38	const uint8_t arm_uc_default_certificate[1] = { 0 };
adustm	4:cf7342047b4d	39	const uint16_t arm_uc_default_certificate_size =
adustm	4:cf7342047b4d	40	sizeof(arm_uc_default_certificate);
screamer	10:b27c962b3c3f	41	#endif