pelion-example-disco-iot01 - Mbed OS and Pelion Device Management example over…

ST » Code » pelion-example-disco-iot01

Mbed OS and Pelion Device Management example over WIFI for DISCO_L475VG_IOT01 board

Dependencies: X_NUCLEO_COMMON ST_INTERFACES

DEPRECATED

This example application is not maintained and not recommended. It uses an old version of Mbed OS, Pelion DM and Arm toolchain. It doesn't work with Mbed Studio.

Please use: https://os.mbed.com/teams/mbed-os-examples/code/mbed-os-example-pelion/

This example is known to work on the following platforms:

DISCO_L475E_IOT01A over WiFI and using onboard QSPI flash.

DISCO_L475E_IOT01A

Follow the Quick-Start instructions: https://cloud.mbed.com/quick-start

Example functionality

This example showcases the following device functionality:

Read onboard temperature and humidity sensors, and report them as Pelion LWM2M resources (see image below).
On user button click, increment Pelion LWM2M button resource.
Allow the user to change the state of the board LED from Pelion LWM2M led_state resource and PUT request.
Uses all onboard sensors and reports them as Pelion LWM2M resources.

/media/uploads/screamer/pelion_st_humidity_reading.png?v=2

Use this example with Mbed CLI

1. Import the application into your desktop:

mbed import https://os.mbed.com/teams/ST/code/pelion-example-disco-iot01

cd pelion-example-disco-iot01

2. Install the CLOUD_SDK_API_KEY

mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>

For instructions on how to generate your API key, please see the documentation.

3. Initialize firmware credentials (done once per repository). You can use the following command:

mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force

If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.

4. Compile and program:

mbed compile -t <toolchain> -m DISCO_L475VG_IOT01A

(supported toolchains : GCC_ARM / ARM / IAR)

5. You can connect on a virtual terminal/COM port to the platform using:

mbed sterm -b 115200

This should give you an output similar to:

[BOOT] Mbed Bootloader
[BOOT] ARM: 00000000000000000000
[BOOT] OEM: 00000000000000000000
[BOOT] Layout: 0 80096F4
[BOOT] Active firmware integrity check:
[BOOT] SHA256: 0660E360D432225D5251461998FD8617B017098C5F1F90D5FB607BF8C27ED530
[BOOT] Version: 1553615309
[BOOT] Slot 0 is empty
[BOOT] Active firmware up-to-date
[BOOT] Application's start address: 0x8010400
[BOOT] Application's jump address: 0x8011041
[BOOT] Application's stack address: 0x20018000
[BOOT] Forwarding to application...

Starting Simple Pelion Device Management Client example
You can hold the user button during boot to format the storage and change the device identity.

Sensors configuration:
Invalid new address!
HTS221  humidity & temperature    = 0xBC
LPS22HB pressure & temperature    = 0xB1
LIS3MDL magnetometer              = 0x3D
LSM6DSL accelerometer & gyroscope = 0x6A

Connecting to the network using Wifi...
Connected to the network successfully. IP address: 192.168.1.3
Initializing Pelion Device Management Client...
Initialized Pelion Client. Registering...
Registered to Pelion Device Management. Endpoint Name: 0169********************001002d5

ADC temp:     23.0037 C,  vref:      0.3661 V
HTS221 temp:   28.700 C,  humidity:   31.90 %
LPS22HB temp:  29.600 C,  pressure: 1032.01 mbar
LIS3MDL mag:    0.217 x,  -0.284 y,  -0.053 z [gauss]
LSM6DSL acc:    0.005 x,  -0.014 y,   1.029 z [g]
LSM6DSL gyro:   0.910 x,  -0.910 y,   1.120 z [dps]
VL53L0X dist:    1855 mm

mbed_app.json@34:a5724eeaaf9d, 2019-03-27 (annotated)

Committer:: screamer
Date:: Wed Mar 27 19:05:34 2019 +0000
Revision:: 34:a5724eeaaf9d
Parent:: 32:2871fbeb627d

Remove unnecessary macros

Who changed what in which revision?

User	Revision	Line number	New contents of line
adustm	1:e86b1cffc402	1	{
adustm	1:e86b1cffc402	2	"target_overrides": {
adustm	1:e86b1cffc402	3	"*": {
screamer	28:0e774865873d	4	"target.components_remove" : ["FLASHIAP"],
screamer	28:0e774865873d	5	"platform.stdio-baud-rate" : 115200,
screamer	28:0e774865873d	6	"platform.stdio-convert-newlines" : true,
screamer	28:0e774865873d	7	"mbed-trace.enable" : null,
screamer	28:0e774865873d	8	"nsapi.default-wifi-security" : "WPA_WPA2",
screamer	28:0e774865873d	9	"nsapi.default-wifi-ssid" : "\"SSID\"",
screamer	32:2871fbeb627d	10	"nsapi.default-wifi-password" : "\"Password\""
adustm	4:cf7342047b4d	11	},
adustm	4:cf7342047b4d	12	"DISCO_L475VG_IOT01A": {
screamer	28:0e774865873d	13	"target.macros_remove" : ["MBED_TICKLESS"],
screamer	28:0e774865873d	14	"target.components_add" : ["QSPIF"],
screamer	28:0e774865873d	15	"target.components_add" : ["WIFI_ISM43362"],
screamer	28:0e774865873d	16	"target.extra_labels_remove" : ["STM32L475xG"],
screamer	28:0e774865873d	17	"target.extra_labels_add" : ["STM32L475xG_SRAM2"],
screamer	28:0e774865873d	18	"target.network-default-interface-type" : "WIFI",
screamer	28:0e774865873d	19	"device-management.flash-start-address" : "0x08000000",
screamer	28:0e774865873d	20	"device-management.flash-size" : "(1024*1024)",
screamer	28:0e774865873d	21	"device-management.sotp-section-1-address" : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 2(21024))",
screamer	28:0e774865873d	22	"device-management.sotp-section-1-size" : "(2*1024)",
screamer	28:0e774865873d	23	"device-management.sotp-section-2-address" : "(MBED_CONF_APP_FLASH_START_ADDRESS + MBED_CONF_APP_FLASH_SIZE - 1(21024))",
screamer	28:0e774865873d	24	"device-management.sotp-section-2-size" : "(2*1024)",
screamer	28:0e774865873d	25	"update-client.application-details" : "(MBED_CONF_APP_FLASH_START_ADDRESS + 64*1024)",
screamer	28:0e774865873d	26	"update-client.storage-address" : "(210241024)",
screamer	28:0e774865873d	27	"update-client.storage-size" : "(210241024)",
screamer	28:0e774865873d	28	"update-client.storage-locations" : "1",
screamer	28:0e774865873d	29	"target.features_add" : ["BOOTLOADER"],
screamer	28:0e774865873d	30	"target.bootloader_img" : "bootloader/mbed-bootloader-DISCO_L475VG_IOT01A.bin",
screamer	28:0e774865873d	31	"target.header_offset" : "0x10000",
screamer	28:0e774865873d	32	"target.app_offset" : "0x10400",
screamer	28:0e774865873d	33	"button-pressed-state" : 0
adustm	1:e86b1cffc402	34	}
adustm	1:e86b1cffc402	35	},
adustm	1:e86b1cffc402	36	"config": {
adustm	4:cf7342047b4d	37	"format-storage-layer-on-error": {
adustm	4:cf7342047b4d	38	"help": "Whether to format the storage layer when it cannot be read - always disable for production devices!",
adustm	4:cf7342047b4d	39	"value": 1
adustm	4:cf7342047b4d	40	},
screamer	10:b27c962b3c3f	41	"main-stack-size": {
screamer	10:b27c962b3c3f	42	"value": 6000
screamer	10:b27c962b3c3f	43	},
screamer	28:0e774865873d	44	"use-button": {
screamer	28:0e774865873d	45	"help": "Whether the target has a button",
screamer	28:0e774865873d	46	"macro_name": "USE_BUTTON",
screamer	28:0e774865873d	47	"value": true
adustm	1:e86b1cffc402	48	},
screamer	28:0e774865873d	49	"button-pressed-state": {
screamer	28:0e774865873d	50	"help": "Value of the button when pressed",
screamer	28:0e774865873d	51	"value": 1
adustm	1:e86b1cffc402	52	},
screamer	28:0e774865873d	53	"no_led": {
screamer	28:0e774865873d	54	"help": "This flag disables the heartbeat thread in tests. This is useful for platforms that don't have an LED or the LED is used for other functionality like LED on the SPI clockline etc",
adustm	4:cf7342047b4d	55	"value": null
adustm	1:e86b1cffc402	56	}
adustm	1:e86b1cffc402	57	}
screamer	28:0e774865873d	58	}