ST / Mbed OS mbed-os-example-ble-EddystoneService

BLE EddystoneService example

This example is a fork of the following mbed-os example:

https://developer.mbed.org/teams/mbed-os-examples/code/mbed-os-example-ble-EddystoneService/

Please read the documentation in this page.

Diff: readme.md

Revision:
1:9db4d46bb63f
Parent:
0:4c8f8bf32a99
Child:
2:9ee673e0b86a
--- a/readme.md	Tue Jul 26 14:40:25 2016 +0100
+++ b/readme.md	Thu Jul 28 23:14:36 2016 +0100
@@ -1,90 +1,90 @@
-Eddystone beacons broadcast a small amount of information, like URLs, to nearby BLE devices.
-
-The Eddystone Beacon sample application runs in two stages:
-
-1. On startup, the Configuration Service (which allows [modification of the beacon](https://github.com/google/eddystone/blob/master/eddystone-url/docs/config-service-spec.md)) runs for a user-defined period (default - 30 seconds).
-
-1. When the Configuration Service period ends, the Eddystone Service broadcasts advertisement packets.
-
-
-
-# Running the application
-
-## Requirements
-
-You should install the *Physical Web* application on your phone:
-
-- [Android version](https://play.google.com/store/apps/details?id=physical_web.org.physicalweb)
-
-- [iOS version](https://itunes.apple.com/us/app/physical-web/id927653608?mt=8)
-
-
-**Note:** It is also possible to use a regular scanner to interract with your Eddystone beacon but it requires
-knowledge about BLE and Eddystone beacon specification out of the scope of this document.
-
-
-Hardware requirements are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md).
-
-## Building instructions
-
-Building instructions for all samples are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md).
-
-### Working with nRF51-based 16K targets
-
-Because of memory constraints, you can't use the SoftDevice 130 (S130) to build for nRF51-based 16K targets. If you are using these targets, then before building:
-
-1. Open the ``config.json`` file in this sample.
-1. Change ``soft device`` to ``S110``.
-1. Save.
-
-You can now build for nRF51-based 16K targets.
-
-## Setting up the beacon
-
-By default, the beacon directs to the url ``http://mbed.org``. You can change this to your own URL in two ways:
-
-1. Manually edit the code in ``main.cpp`` in your copy of the sample.
-
-1. Build and run the application's default code as explained in the building instructions. When the beacon starts up, the Configuration Service runs for 30 seconds (this is the default value; you can change it in ``main.cpp``). While the Configuration Service runs, you can use a BLE scanner on your phone to edit the values the service presents.
-
-## Checking for success
-
-1. Build the application and install it on your board as explained in the building instructions.
-
-1. Open the *Physical Web* application on your phone. It will start to search for nearby beacons.
-
-    ![](img/app_start.png)
-
-    **figure 1** Start of the *Physical Web* application version 0.1.856 on Android
-
-1. When the beacon starts up, the Configuration Service runs for 30 seconds.
-During this time it is possible to change the URL advertised by the beacon.
-It is also important to note that during these 30 seconds, your device will not advertise any URL.
-
-    ![](img/open_configuration.png)
-
-    **figure 2** How to open the beacon configuration view using the *Physical Web* application version 0.1.856 on Android
-
-
-1. Edit the URL advertised by your beacon.
-
-    ![](img/edit_url.png)
-
-    **figure 3** How to edit the URL advertised by your beacon using the *Physical Web* application version 0.1.856 on Android
-
-
-1. Save the URL which will be advertised by your beacon.
-
-    ![](img/save_url.png)
-
-    **figure 4** How to save your beacon configuration and start advertising URL using the *Physical Web* application version 0.1.856 on Android.
-
-
-1. Find your device; it should advertise the URL you have set.
-
-    ![](img/result.png)
-
-    **figure 5** Display of URL advertised by your beacon using the *Physical Web* application version 0.1.856 on Android.
-
-
-**Note:** You can use the [Eddystone Observer](https://github.com/ARMmbed/mbed-os-example-ble/tree/master/BLE_EddystoneObserver) sample instead of a phone application.
+Eddystone beacons broadcast a small amount of information, like URLs, to nearby BLE devices.
+
+The Eddystone Beacon sample application runs in two stages:
+
+1. On startup, the Configuration Service (which allows [modification of the beacon](https://github.com/google/eddystone/blob/master/eddystone-url/docs/config-service-spec.md)) runs for a user-defined period (default - 30 seconds).
+
+1. When the Configuration Service period ends, the Eddystone Service broadcasts advertisement packets.
+
+
+
+# Running the application
+
+## Requirements
+
+You should install the *Physical Web* application on your phone:
+
+- [Android version](https://play.google.com/store/apps/details?id=physical_web.org.physicalweb)
+
+- [iOS version](https://itunes.apple.com/us/app/physical-web/id927653608?mt=8)
+
+
+**Note:** It is also possible to use a regular scanner to interract with your Eddystone beacon but it requires
+knowledge about BLE and Eddystone beacon specification out of the scope of this document.
+
+
+Hardware requirements are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md).
+
+## Building instructions
+
+Building instructions for all samples are in the [main readme](https://github.com/ARMmbed/mbed-os-example-ble/blob/master/README.md).
+
+### Working with nRF51-based 16K targets
+
+Because of memory constraints, you can't use the SoftDevice 130 (S130) to build for nRF51-based 16K targets. If you are using these targets, then before building:
+
+1. Open the ``config.json`` file in this sample.
+1. Change ``soft device`` to ``S110``.
+1. Save.
+
+You can now build for nRF51-based 16K targets.
+
+## Setting up the beacon
+
+By default, the beacon directs to the url ``http://mbed.org``. You can change this to your own URL in two ways:
+
+1. Manually edit the code in ``main.cpp`` in your copy of the sample.
+
+1. Build and run the application's default code as explained in the building instructions. When the beacon starts up, the Configuration Service runs for 30 seconds (this is the default value; you can change it in ``main.cpp``). While the Configuration Service runs, you can use a BLE scanner on your phone to edit the values the service presents.
+
+## Checking for success
+
+1. Build the application and install it on your board as explained in the building instructions.
+
+1. Open the *Physical Web* application on your phone. It will start to search for nearby beacons.
+
+    ![](img/app_start.png)
+
+    **figure 1** Start of the *Physical Web* application version 0.1.856 on Android
+
+1. When the beacon starts up, the Configuration Service runs for 30 seconds.
+During this time it is possible to change the URL advertised by the beacon.
+It is also important to note that during these 30 seconds, your device will not advertise any URL.
+
+    ![](img/open_configuration.png)
+
+    **figure 2** How to open the beacon configuration view using the *Physical Web* application version 0.1.856 on Android
+
+
+1. Edit the URL advertised by your beacon.
+
+    ![](img/edit_url.png)
+
+    **figure 3** How to edit the URL advertised by your beacon using the *Physical Web* application version 0.1.856 on Android
+
+
+1. Save the URL which will be advertised by your beacon.
+
+    ![](img/save_url.png)
+
+    **figure 4** How to save your beacon configuration and start advertising URL using the *Physical Web* application version 0.1.856 on Android.
+
+
+1. Find your device; it should advertise the URL you have set.
+
+    ![](img/result.png)
+
+    **figure 5** Display of URL advertised by your beacon using the *Physical Web* application version 0.1.856 on Android.
+
+
+**Note:** You can use the [Eddystone Observer](https://github.com/ARMmbed/mbed-os-example-ble/tree/master/BLE_EddystoneObserver) sample instead of a phone application.