ST / X_NUCLEO_LED61A1

Library to handle the X-NUCLEO-LED61A1 LED Control Expansion Board based on the LED6001 component.

Dependents:   LedDimming_LED61A1_mbedOS HelloWorld_LED61A1_mbedOS LedDimming_LED61A1 HelloWorld_LED61A1 ... more

Fork of X_NUCLEO_LED61A1 by ST Expansion SW Team

LED Control Library

Library to handle the X-NUCLEO-LED61A1 LED Control Expansion Board based on the LED6001 component.

Platform compatibility

  • NUCLEO boards have been tested with the default configuration provided by the HelloWorld_LED61A1 example.
  • NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC boards have been tested with the following patch:
    • to connect with a wire the NUCLEO’s D9 pin to the LED61A1’s D6 pin;
    • to initialize the pwm PinName variable with D9 rather than D6.
  • NUCLEO-F302R8 board has been tested with the following patch:
    • to connect with a wire the NUCLEO’s D7 pin to the LED61A1’s D6 pin;
    • to initialize the pwm PinName variable with D7 rather than D6.
  • LPCXpresso11U68 board has been tested with the limitation of using only the PWM Dimming, as it provides only one PWM channel, thus allowing just one between the PWM or Analog Dimming functionalities. It has been tested with the following patch:
    • to connect with a wire the LPCX’s D3 pin to the LED61A1’s D4 pin;
    • to connect with a wire the LPCX’s D4 pin to the LED61A1’s D6 pin;
    • to initialize the xfault_irq PinName variable with D3 rather than D4;
    • to initialize the pwm PinName variable with D4 rather than D6;
    • to initialize the analog PinName variable with NC rather than D5;
    • to disable the use of the user button in any application example as it is not available.
  • FRDM-K64F board has been tested with the following patch:
    • to disable the use of the user button in any application example as it is not available.

Diff: BSP/x_nucleo_led61a1_config.h

Revision:
1:eab47c592e8f
Parent:
0:4a3d02667d9f
Child:
2:a270bdb62fc8
--- a/BSP/x_nucleo_led61a1_config.h	Thu Dec 10 15:32:20 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,78 +0,0 @@
-/**
- ******************************************************************************
- * @file    x_nucleo_led61a1_config.h
- * @author  AST / Software Platforms and Cloud
- * @version V1.0
- * @date    December 9rd, 2015
- * @brief   Configuration header file for the X_NUCLEO_LED61A1 expansion board.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/* Generated with Stm32CubeTOO -----------------------------------------------*/
-
-
-/* Define to prevent from recursive inclusion --------------------------------*/
-
-#ifndef __X_NUCLEO_LED61A1_CONFIG_H
-#define __X_NUCLEO_LED61A1_CONFIG_H
-
-
-/* Definitions ---------------------------------------------------------------*/
-
-/* ACTION --------------------------------------------------------------------*
- * Specify here a configuration for I/O and interrupts' pins.                 *
- *                                                                            *
- * Example:                                                                   *
- *   // I2C.                                                                  *
- *   #define EXPANSION_BOARD_PIN_I2C_SCL  (D15)                               *
- *   #define EXPANSION_BOARD_PIN_I2C_SDA  (D14)                               *
- *                                                                            *
- *   // SPI.                                                                  *
- *   #define EXPANSION_BOARD_PIN_SPI_MOSI (D11)                               *
- *   #define EXPANSION_BOARD_PIN_SPI_MISO (D12)                               *
- *   #define EXPANSION_BOARD_PIN_SPI_SCLK (D13)                               *
- *                                                                            *
- *   // Interrupts.                                                           *
- *   #define EXPANSION_BOARD_PIN_INT_1    (A2)                                *
- *----------------------------------------------------------------------------*/
-/* I2C. */
-#define X_NUCLEO_LED61A1_PIN_I2C_SCL  (D15)
-#define X_NUCLEO_LED61A1_PIN_I2C_SDA  (D14)
-
-/* SPI. */
-#define X_NUCLEO_LED61A1_PIN_SPI_MOSI (D11)
-#define X_NUCLEO_LED61A1_PIN_SPI_MISO (D12)
-#define X_NUCLEO_LED61A1_PIN_SPI_SCLK (D13)
-
-/* Interrupts. */
-#define X_NUCLEO_LED61A1_PIN_INT_1    (A2)
-
-#endif // __X_NUCLEO_LED61A1_CONFIG_H
\ No newline at end of file