X_NUCLEO_IPS02A1 24V Intelligent Power Switch (IPS) Nucleo Expansion Board Firmware Package

Revision 1:95670ff9e177, committed 2016-04-07

Comitter:

grussian

Date:

Thu Apr 07 13:42:04 2016 +0000

Parent:

0:c175921ca7c3

Child:

2:06d0eb54630a

Commit message:

removed main.c to create library

Changed in this revision

--- a/main.cpp	Thu Apr 07 13:37:58 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,279 +0,0 @@
-/**
- ******************************************************************************
- * @file    main.cpp
- * @author  APG Mass Market
- * @version V1.0.1
- * @date    16-Nov-2015
- * @brief   Example application for using the X_NUCLEO_IPS02A1 
- *          Intelligent Power Switch Nucleo expansion board.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- *  SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
-*/ 
-
-/**
- * @mainpage X_NUCLEO_IPS02A1 Intelligent Power Switch Nucleo Expansion Board Firmware Package
- *
- * <b>Introduction</b>
- *
- * This firmware package includes Components Device Drivers, Board Support Package
- * and example application for STMicroelectronics X_NUCLEO_IPS02A1 Intelligent Power Switch
- * Nucleo Expansion Board
- * 
- * <b>Example Application</b>
- *
- */
-/*** Includes ----------------------------------------------------------------- ***/
-#include "mbed.h"
-#include "assert.h"
-#include "x_nucleo_ips02a1.h"
-
-/*** Static variables --------------------------------------------------------- ***/
-#ifdef DBG_MCU
-#include "DbgMCU.h"
-static DbgMCU enable_dbg;
-#endif // DBG_MCU
-
-/* HW settings */
-/* Pay attention before changing HW settings, they must be coherent with you HW design */
-/* Power Switch Connection to Arduino connectors */
-#define IPS02A1_PIN_IN_1             (D5)
-#define IPS02A1_PIN_IN_2             (D6)
-#define IPS02A1_PIN_FR_STBY          (D4)
-#define IPS02A1_PIN_CURRENTSENSE1    (A2)
-#define IPS02A1_PIN_CURRENTSENSE2    (A3)
-
-
-/* V-Ref */
-#define V_REF 3.3
-/* Rsense Value */
-#define R_SENSE 1e3
-/* R_D1 */
-#define R_D1 56e3
-/* R_D2 */
-#define R_D2 36e3
-
-/* End of HW settings */
-
-static X_NUCLEO_IPS02A1 &ips_expansion_board = X_NUCLEO_IPS02A1::Instance(IPS02A1_PIN_IN_1,
-                                                                          IPS02A1_PIN_IN_2,
-                                                                          IPS02A1_PIN_FR_STBY,
-                                                                          IPS02A1_PIN_CURRENTSENSE1,
-                                                                          IPS02A1_PIN_CURRENTSENSE2,                                                                         
-                                                                          V_REF,
-                                                                          R_SENSE,
-                                                                          R_D1,
-                                                                          R_D2);
-    
-                          
-static Ticker ticker;
-DigitalOut UserLed(LED1);    
-
-/*** Main function ------------------------------------------------------------- ***/
-/* Generic main function/loop, interrupt based cyclic execution
-*/
-
-float Multisense_Signal = 0;    // Multisense pin - signal level
-bool  ButtonPressed = 0;         // User Button
-int   TestSequence = 1;           // Test sequence counter
-
-//------------------------------------
-// Hyperterminal configuration
-// 9600 bauds, 8-bit data, no parity
-//------------------------------------
-
-InterruptIn UserButton(USER_BUTTON);  // B1 is the User Button
-void B1_pressed (void);
-void LedBlink (int TestSequence);
-void Write_Serial (void);
-void Reset_Pins (void);
-
-
-int main(void){
-    UserButton.fall(&B1_pressed);       //interrupt User Button
-   
-    printf("############################################################ \n\r");
-    printf("###################  TEST PROCEDURE ######################## \n\r");
-    printf("############################################################ \n\n\r");
-    printf("This demo performs current measurements on Ch1 and Ch2  \n\r");
-    printf("in the following conditions: \n\r\n\r");
-    printf(" 1) Ch1 OFF, Ch2 OFF \n\r");
-    printf(" 2) Ch1 ON,  Ch2 OFF \n\r");
-    printf(" 3) Ch1 OFF, Ch2 ON \n\r");
-    printf(" 4) Ch1 ON,  Ch2 ON \n\r\n\r");
-      
-    printf("Start test Procedure.... \n\r\n\r");
-    printf("PRESS USER BUTTON (Blue One) on NUCLEO to perform single test \n\r\n\r\n\r");
-    
-    
-    while (true) {
-        // wait for User button is pressed 
-        while (!ButtonPressed) {
-        }
-           
-        ButtonPressed = 0;
-        
-        LedBlink(TestSequence);
-     
-        switch (TestSequence) {
-          case (1):
-            printf("############################################################ \n\r");
-            printf("###################  TEST PROCEDURE ######################## \n\r");
-            printf("############################################################ \n\n\r");
-            printf("This demo performs current measurements on Ch1 and Ch2  \n\r");
-            printf("in the following conditions: \n\r\n\r");
-            printf(" 1) Ch1 OFF, Ch2 OFF \n\r");
-            printf(" 2) Ch1 ON,  Ch2 OFF \n\r");
-            printf(" 3) Ch1 OFF, Ch2 ON \n\r");
-            printf(" 4) Ch1 ON,  Ch2 ON \n\r\n\r");
-            printf("\n\r\n\r");
-            break;
-          case (2): {
-            printf("Test 1: StandBy\n\r");
-            Reset_Pins();
-            wait (0.1);
-            Write_Serial();
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_1);
-            printf("Current Ch1 = %2.3fA \n\r", Multisense_Signal);
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_2);
-            printf("Current Ch2 = %2.3fA \n\r", Multisense_Signal);
-            printf("\n\r\n\r");
-           }
-           break;
-
-          
-          case(3):{
-            printf("Test 2: Ch1=ON, CH2=OFF\n\r");
-            ips_expansion_board.vps235h2.In_1 = 1;
-            ips_expansion_board.vps235h2.In_2 = 0;
-            ips_expansion_board.vps235h2.Fr_Stby = 1;
-           
-            wait (0.1);
-            Write_Serial();
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_1);
-            printf("Current Ch1 = %2.3fA \n\r", Multisense_Signal);
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_2);
-            printf("Current Ch2 = %2.3fA \n\r", Multisense_Signal);
-            wait (0.5);
-            Reset_Pins();
-            printf("\n\r\n\r");
-           }
-           break;
-
-          case(4):{
-            printf("Test 3: Ch1=OFF, CH2=ON\n\r");
-            ips_expansion_board.vps235h2.In_1 = 0;
-            ips_expansion_board.vps235h2.In_2 = 1;
-            ips_expansion_board.vps235h2.Fr_Stby = 1;
-
-            wait (0.1);
-            Write_Serial();
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_1);
-            printf("Current Ch1 = %2.3fA \n\r", Multisense_Signal);
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_2);
-            printf("Current Ch2 = %2.3fA \n\r", Multisense_Signal);
-            wait (.5);
-            Reset_Pins();
-            printf("\n\r\n\r");
-           }
-           break;
-
-          case(5):{
-            printf("Test 4: Ch1=ON, CH2=ON  \n\r");
-            ips_expansion_board.vps235h2.In_1= 1;
-            ips_expansion_board.vps235h2.In_2 = 1;
-            ips_expansion_board.vps235h2.Fr_Stby = 1;
-            wait (0.1);
-            Write_Serial();
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_1);
-            printf("Current Ch1 = %2.3fA \n\r", Multisense_Signal);
-            Multisense_Signal= ips_expansion_board.GetCurrent(CHANNEL_2);
-            printf("Current Ch2 = %2.3fA \n\r", Multisense_Signal);
-            wait (.5);
-            Reset_Pins();
-            printf("\n\r\n\r");
-           }
-          break;
-
-          default: {
-            printf("End Test Cycle...press to user button to continue\n\n\n\r");  
-            TestSequence = 0;
-            Reset_Pins();
-           }
-          break;
-
-        } 
-        
-    }
-    
- }
-
-
-void B1_pressed (){
-  // Interrupt procedure - User button is pressed
-    TestSequence ++;
-
-    UserLed = 1; // LED is ON
-    wait(0.05); // 50 ms
-    UserLed = 0; // LED is OFF
-
-    ButtonPressed = 1;
-
-}
-
-void LedBlink (int TestSequence){
-// Option feedback by usingUser LED
-    for (int TestCounter =0; TestCounter<TestSequence; TestCounter++) {
-        UserLed = 1; // LED is ON
-        wait(0.05); // 50 ms
-        UserLed = 0; // LED is OFF
-        wait(0.05); // 50 msec
-    }
-    wait(1-(TestSequence*2*0.05));
-}
-
-void Write_Serial (){
-// This code send messages and data to the serial port
-// send info to serial port
-
-    printf("Input 1= %d\t", ips_expansion_board.vps235h2.In_1.read());
-    printf("Input 2= %d\t", ips_expansion_board.vps235h2.In_2.read());
-    printf("Fr_Stby= %d\t\n\r", ips_expansion_board.vps235h2.Fr_Stby.read());
-    
-
- }
- 
- void Reset_Pins(){
-// reset input pins to  
-   ips_expansion_board.vps235h2.In_1= 0;
-   ips_expansion_board.vps235h2.In_2 = 0;
-   ips_expansion_board.vps235h2.Fr_Stby = 0;
-}
-
-
-