Firmware Library for X-NUCLEO-IKS01A2 (MEMS Inertial & Environmental Sensors) Expansion Board
Dependencies: LPS22HB LSM6DSL LSM303AGR HTS221
Dependents: Giroscopio_main HelloWorld_IKS01A2 DuckieTownCar HelloWorld_IKS01A2 ... more
Fork of X_NUCLEO_IKS01A2 by
X-NUCLEO-IKS01A2 MEMS Inertial & Environmental Sensor Nucleo Expansion Board Firmware Package
Introduction
This firmware package includes Components Device Drivers and Board Support Package for STMicroelectronics' X-NUCLEO-IKS01A2
MEMS Inertial & Environmental Sensors Nucleo Expansion Board.
Firmware Library
Class X_NUCLEO_IKS01A2 is intended to represent the MEMS inertial & environmental sensors expansion board with the same name.
The expansion board is basically featuring four IPs:
- a HTS221 Relative Humidity and Temperature Sensor,
- a LSM303AGR 3-Axis Magnetometer and 3-Axis Accelerometer
- a LPS22HB MEMS Pressure and Temperature Sensor
- a LSM6DSL 3-Axis Accelerometer and 3-Axis Gyroscope
The expansion board features also a DIL 24-pin socket which makes it possible to add further MEMS adapters and other sensors (e.g. UV index).
It is intentionally implemented as a singleton because only one X_NUCLEO_IKS01A2 at a time might be deployed in a HW component stack. In order to get the singleton instance you have to call class method `instance()`, e.g.:
// Sensors expansion board singleton instance static X_NUCLEO_IKS01A2 *mems_expansion_board = X_NUCLEO_IKS01A2::instance(D14, D15, D4, D5);
Furthermore, library ST_INTERFACES
contains all abstract classes which together constitute the common API to which all existing and future ST components will adhere to.
Example Applications
- Hello World
- 6D Orientation Recognition
- Free Fall Event
- Multi Event
- Pedometer
- Single and Double Tap Events
- Tilt Event
- Wake Up Event
x_nucleo_iks01a2_targets.h
- Committer:
- cparata
- Date:
- 2022-02-08
- Revision:
- 15:8e441a6884cb
- Parent:
- 1:bd2a01e81e6f
File content as of revision 15:8e441a6884cb:
/** ****************************************************************************** * @file x_nucleo_iks01a2_targets.h * @author CLab * @version V1.0.0 * @date 9-August-2016 * @brief This header file is intended to manage the differences between * the different supported base-boards which might mount the * X_NUCLEO_IKS01A2 MEMS Inertial & Environmental Nucleo Expansion Board. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent from recursive inclusion --------------------------------*/ #ifndef _X_NUCLEO_IKS01A2_TARGETS_H_ #define _X_NUCLEO_IKS01A2_TARGETS_H_ /*** I2C ***/ /* Use Arduino I2C Connectors */ #define IKS01A2_PIN_I2C_SDA (D14) #define IKS01A2_PIN_I2C_SCL (D15) /* LSM6DSL INT1 */ #define IKS01A2_PIN_LSM6DSL_INT1 (D4) /* LSM6DSL INT2 */ #define IKS01A2_PIN_LSM6DSL_INT2 (D5) #endif // _X_NUCLEO_IKS01A2_TARGETS_H_