ST
mbed library for STMicroelectronics' X-NUCLEO-IKA01A1 expansion board.
Dependents: HelloWorld_IKA01A1
Fork of
X_NUCLEO_IKA01A1
by 
ST Expansion SW Team
Library for STMicroelectronics' X-NUCLEO-IKA01A1 multifunctional expansion board based on operational amplifiers.
Diff: Components/tsu104/tsu104_class.h
- Revision:
- 2:19d1dcef0c0e
- Child:
- 6:5dd31859cea3
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/tsu104/tsu104_class.h Wed Mar 02 12:58:02 2016 +0000
@@ -0,0 +1,297 @@
+/**
+ ******************************************************************************
+ * @file tsu104_class.h
+ * @author Central Labs
+ * @version 1.0.0
+ * @date 11-February-2016
+ * @brief Portable architecture for TSU104
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Generated with STM32CubeTOO -----------------------------------------------*/
+
+
+/* Revision ------------------------------------------------------------------*/
+/*
+ Repository: http://svn.x-nucleodev.codex.cro.st.com/svnroot/X-NucleoDev
+ Branch/Trunk/Tag: trunk
+ Based on: X-CUBE-IKA01A1/trunk/Drivers/BSP/Components/tsu104/tsu104.h
+ Revision: 402
+*/
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __TSU104_CLASS_H
+#define __TSU104_CLASS_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+/* ACTION 1 ------------------------------------------------------------------*
+ * Include here platform specific header files. *
+ *----------------------------------------------------------------------------*/
+#include "mbed.h"
+/* ACTION 2 ------------------------------------------------------------------*
+ * Include here component specific header files. *
+ *----------------------------------------------------------------------------*/
+#include "tsu104.h"
+/* ACTION 3 ------------------------------------------------------------------*
+ * Include here interface specific header files. *
+ * *
+ * Example: *
+ * #include "../Interfaces/Humidity_class.h" *
+ * #include "../Interfaces/Temperature_class.h" *
+ *----------------------------------------------------------------------------*/
+#include "../Interfaces/Windcomp_class.h"
+
+
+/* Classes -------------------------------------------------------------------*/
+
+/**
+ * @brief Class representing a TSU104 component.
+ */
+class TSU104 : public Windcomp
+{
+public:
+
+ /*** Constructor and Destructor Methods ***/
+
+ /**
+ * @brief Constructor.
+ */
+ TSU104(void) : Windcomp()
+ {
+ /* ACTION 4 ----------------------------------------------------------*
+ * Initialize here the component's member variables, one variable per *
+ * line. *
+ * *
+ * Example: *
+ * measure = 0; *
+ * instance_id = number_of_instances++; *
+ *--------------------------------------------------------------------*/
+ }
+
+ /**
+ * @brief Destructor.
+ */
+ virtual ~TSU104(void) {}
+
+
+ /*** Public Component Related Methods ***/
+
+ /* ACTION 5 --------------------------------------------------------------*
+ * Implement here the component's public methods, as wrappers of the C *
+ * component's functions. *
+ * They should be: *
+ * + Methods with the same name of the C component's virtual table's *
+ * functions (1); *
+ * + Methods with the same name of the C component's extended virtual *
+ * table's functions, if any (2). *
+ * *
+ * Example: *
+ * virtual int GetValue(float *f) //(1) *
+ * { *
+ * return COMPONENT_GetValue(float *f); *
+ * } *
+ * *
+ * virtual int EnableFeature(void) //(2) *
+ * { *
+ * return COMPONENT_EnableFeature(); *
+ * } *
+ *------------------------------------------------------------------------*/
+ virtual int Init(void *init = NULL)
+ {
+ return (int) TSU104_Init((void *) init);
+ }
+
+ virtual int ReadID(uint8_t *id = NULL)
+ {
+ return (int) TSU104_ReadID((uint8_t *) id);
+ }
+
+ virtual unsigned int TSU104_WindComp_Get_D2(void)
+ {
+ DigitalIn windowsCompD2(D2);
+ return windowsCompD2.read();
+ }
+
+ virtual unsigned int TSU104_WindComp_Get_D4(void)
+ {
+ DigitalIn windowsCompD4(D4);
+ return windowsCompD4.read();
+ }
+
+ virtual unsigned int TSU104_PhotoSensor_GetVoltage(void)
+ {
+ AnalogIn photoSensor(A4);
+ float voltage = photoSensor.read();
+ voltage = voltage*3.3*1000.0; // voltage in mV
+ return voltage;
+ }
+
+
+ /*** Public Interrupt Related Methods ***/
+
+ /* ACTION 6 --------------------------------------------------------------*
+ * Implement here interrupt related methods, if any. *
+ * Note that interrupt handling is platform dependent, e.g.: *
+ * + mbed: *
+ * InterruptIn feature_irq(pin); //Interrupt object. *
+ * feature_irq.fall(callback); //Attach a callback. *
+ * feature_irq.mode(PullNone); //Set interrupt mode. *
+ * feature_irq.enable_irq(); //Enable interrupt. *
+ * feature_irq.disable_irq(); //Disable interrupt. *
+ * + Arduino: *
+ * attachInterrupt(pin, callback, RISING); //Attach a callback. *
+ * detachInterrupt(pin); //Detach a callback. *
+ * *
+ * Example (mbed): *
+ * void AttachFeatureIRQ(void (*fptr) (void)) *
+ * { *
+ * feature_irq.fall(fptr); *
+ * } *
+ * *
+ * void EnableFeatureIRQ(void) *
+ * { *
+ * feature_irq.enable_irq(); *
+ * } *
+ * *
+ * void DisableFeatureIRQ(void) *
+ * { *
+ * feature_irq.disable_irq(); *
+ * } *
+ *------------------------------------------------------------------------*/
+
+
+protected:
+
+ /*** Protected Component Related Methods ***/
+
+ /* ACTION 7 --------------------------------------------------------------*
+ * Declare here the component's specific methods. *
+ * They should be: *
+ * + Methods with the same name of the C component's virtual table's *
+ * functions (1); *
+ * + Methods with the same name of the C component's extended virtual *
+ * table's functions, if any (2); *
+ * + Helper methods, if any, like functions declared in the component's *
+ * source files but not pointed by the component's virtual table (3). *
+ * *
+ * Example: *
+ * Status_t COMPONENT_GetValue(float *f); //(1) *
+ * Status_t COMPONENT_EnableFeature(void); //(2) *
+ * Status_t COMPONENT_ComputeAverage(void); //(3) *
+ *------------------------------------------------------------------------*/
+ /* TSU104's generic functions. */
+ Status_t TSU104_Init(void *init);
+ Status_t TSU104_ReadID(void *id);
+
+ /* TSU104's interrupts related functions. */
+ Status_t TSU104_ConfigIT(void* a);
+
+
+ /*** Component's I/O Methods ***/
+
+ /* ACTION 8 --------------------------------------------------------------*
+ * Implement here other I/O methods beyond those already implemented *
+ * above, which are declared extern within the component's header file. *
+ *------------------------------------------------------------------------*/
+ unsigned int TSU104_Read_Pin_D2()
+ {
+ /* TO BE IMPLEMENTED BY USING TARGET PLATFORM'S APIs. */
+ return (unsigned int) 0;
+ }
+
+ unsigned int TSU104_Read_Pin_D4()
+ {
+ /* TO BE IMPLEMENTED BY USING TARGET PLATFORM'S APIs. */
+ return (unsigned int) 0;
+ }
+
+ unsigned int TSU104_Read_Pin_A4()
+ {
+ /* TO BE IMPLEMENTED BY USING TARGET PLATFORM'S APIs. */
+ return (unsigned int) 0;
+ }
+
+
+ /*** Component's Instance Variables ***/
+
+ /* ACTION 9 --------------------------------------------------------------*
+ * Declare here interrupt related variables, if needed. *
+ * Note that interrupt handling is platform dependent, see *
+ * "Interrupt Related Methods" above. *
+ * *
+ * Example: *
+ * + mbed: *
+ * InterruptIn feature_irq; *
+ *------------------------------------------------------------------------*/
+
+ /* ACTION 10 -------------------------------------------------------------*
+ * Declare here other pin related variables, if needed. *
+ * *
+ * Example: *
+ * + mbed: *
+ * DigitalOut standby_reset; *
+ *------------------------------------------------------------------------*/
+
+ /* ACTION 11 -------------------------------------------------------------*
+ * Declare here communication related variables, if needed. *
+ * *
+ * Example: *
+ * + mbed: *
+ * DigitalOut address; *
+ * DevI2C &dev_i2c; *
+ *------------------------------------------------------------------------*/
+
+ /* ACTION 12 -------------------------------------------------------------*
+ * Declare here identity related variables, if needed. *
+ * Note that there should be only a unique identifier for each component, *
+ * which should be the "who_am_i" parameter. *
+ *------------------------------------------------------------------------*/
+ /* Identity */
+ uint8_t who_am_i;
+
+ /* ACTION 13 -------------------------------------------------------------*
+ * Declare here the component's static and non-static data, one variable *
+ * per line. *
+ * *
+ * Example: *
+ * float measure; *
+ * int instance_id; *
+ * static int number_of_instances; *
+ *------------------------------------------------------------------------*/
+};
+
+#endif /* __TSU104_CLASS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
\ No newline at end of file
X-NUCLEO-IKA01A1 Multifunctional board based on operational amplifiers.