Expansion SW library to control high power stepper motor(s) using IHM03A1 expansion board(s) with Powerstep01 driver.
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
Dependents: IHM03A1_ExampleFor1Motor HelloWorld_IHM03A1 IHM03A1_ExampleFor3Motors KYPHOS_Stepper_Motor_Control
Fork of X_NUCLEO_IHM03A1 by
Motor Control Library
Library to handle the X-NUCLEO-IHM03A1 Motor Control Expansion Board based on the Powerstep01 component.
It features the:
- read and write of Powerstep01 registers
- Nucleo and expansion board configuration (GPIOs, PWMs, IRQs, etc.)
- Powerstep01 application commands handling
- FLAG and BUSY interrupt handling (alarm reporting)
- Daisy chain handling
The API allows to easily:
- perform various positioning, moves and stops
- get/set or monitor the motor positions
- set home position and mark another position
- get/set minimum and maximum speed
- get current speed
- get/set acceleration and deceleration
- get/set the step mode (up to 1/128)
- get/set the control method
- get/set parameters for voltage mode driving
- get/set parameters for current mode driving
- get/set parameters for gate driving
- configure various protections such as overcurrent detection
- enable/disable alarms
- handle step-clock
- get system status
Daisy-Chain Configuration
The IHM03A1 board can be stacked up to three times so that the Powerstep01 components will be connected in daisy-chain configuration. For this purpose, some resistors must be correctly connected on the boards as depicted here below:
Platform compatibility
Compatible platforms have been tested with the default configuration provided by the HelloWorld_IHM03A1 example.
Components/Common/component_def.h
- Committer:
- davide.aliprandi@st.com
- Date:
- 2017-03-24
- Revision:
- 4:f48e8d87553e
File content as of revision 4:f48e8d87553e:
/**
******************************************************************************
* @file component_def.h
* @author AST
* @version V1.0.0
* @date 1 April 2015
* @brief Generic header file containing a generic component's definitions
* and I/O functions.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __COMPONENT_H
#define __COMPONENT_H
/* Types ---------------------------------------------------------------------*/
/**
* @brief Component's Context structure definition.
*/
typedef struct
{
/* Identity. */
uint8_t who_am_i;
/* ACTION ----------------------------------------------------------------*/
/* There should be only a unique identifier for each component, which */
/* should be the "who_am_i" parameter, hence this parameter is optional. */
/* -----------------------------------------------------------------------*/
/* Type. */
uint8_t type;
/* Configuration. */
uint8_t address;
/* Pointer to the Data. */
void *p_data;
/* Pointer to the Virtual Table. */
void *p_vt;
/* ACTION ----------------------------------------------------------------*/
/* There should be only a unique virtual table for each component, which */
/* should be the "p_vt" parameter, hence this parameter is optional. */
/* -----------------------------------------------------------------------*/
/* Pointer to the Extended Virtual Table. */
void *p_ext_vt;
} handle_t;
/**
* @brief Component's Status enumerator definition.
*/
typedef enum
{
COMPONENT_OK = 0,
COMPONENT_ERROR,
COMPONENT_TIMEOUT,
COMPONENT_NOT_IMPLEMENTED
} status_t;
#endif /* __COMPONENT_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

X-NUCLEO-IHM03A1 High Power Stepper Motor Driver