Expansion SW library to control high power stepper motor(s) using IHM03A1 expansion board(s) with Powerstep01 driver.
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
Dependents: IHM03A1_ExampleFor1Motor HelloWorld_IHM03A1 IHM03A1_ExampleFor3Motors KYPHOS_Stepper_Motor_Control
Fork of X_NUCLEO_IHM03A1 by
Motor Control Library
Library to handle the X-NUCLEO-IHM03A1 Motor Control Expansion Board based on the Powerstep01 component.
It features the:
- read and write of Powerstep01 registers
- Nucleo and expansion board configuration (GPIOs, PWMs, IRQs, etc.)
- Powerstep01 application commands handling
- FLAG and BUSY interrupt handling (alarm reporting)
- Daisy chain handling
The API allows to easily:
- perform various positioning, moves and stops
- get/set or monitor the motor positions
- set home position and mark another position
- get/set minimum and maximum speed
- get current speed
- get/set acceleration and deceleration
- get/set the step mode (up to 1/128)
- get/set the control method
- get/set parameters for voltage mode driving
- get/set parameters for current mode driving
- get/set parameters for gate driving
- configure various protections such as overcurrent detection
- enable/disable alarms
- handle step-clock
- get system status
Daisy-Chain Configuration
The IHM03A1 board can be stacked up to three times so that the Powerstep01 components will be connected in daisy-chain configuration. For this purpose, some resistors must be correctly connected on the boards as depicted here below:
Platform compatibility
Compatible platforms have been tested with the default configuration provided by the HelloWorld_IHM03A1 example.
Diff: Components/Common/component_def.h
- Revision:
- 4:f48e8d87553e
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/Common/component_def.h Fri Mar 24 10:58:48 2017 +0100
@@ -0,0 +1,93 @@
+/**
+ ******************************************************************************
+ * @file component_def.h
+ * @author AST
+ * @version V1.0.0
+ * @date 1 April 2015
+ * @brief Generic header file containing a generic component's definitions
+ * and I/O functions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __COMPONENT_H
+#define __COMPONENT_H
+
+
+/* Types ---------------------------------------------------------------------*/
+
+/**
+ * @brief Component's Context structure definition.
+ */
+typedef struct
+{
+ /* Identity. */
+ uint8_t who_am_i;
+
+ /* ACTION ----------------------------------------------------------------*/
+ /* There should be only a unique identifier for each component, which */
+ /* should be the "who_am_i" parameter, hence this parameter is optional. */
+ /* -----------------------------------------------------------------------*/
+ /* Type. */
+ uint8_t type;
+
+ /* Configuration. */
+ uint8_t address;
+
+ /* Pointer to the Data. */
+ void *p_data;
+
+ /* Pointer to the Virtual Table. */
+ void *p_vt;
+
+ /* ACTION ----------------------------------------------------------------*/
+ /* There should be only a unique virtual table for each component, which */
+ /* should be the "p_vt" parameter, hence this parameter is optional. */
+ /* -----------------------------------------------------------------------*/
+ /* Pointer to the Extended Virtual Table. */
+ void *p_ext_vt;
+} handle_t;
+
+/**
+ * @brief Component's Status enumerator definition.
+ */
+typedef enum
+{
+ COMPONENT_OK = 0,
+ COMPONENT_ERROR,
+ COMPONENT_TIMEOUT,
+ COMPONENT_NOT_IMPLEMENTED
+} status_t;
+
+#endif /* __COMPONENT_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

X-NUCLEO-IHM03A1 High Power Stepper Motor Driver