Expansion SW library to control high power stepper motor(s) using IHM03A1 expansion board(s) with Powerstep01 driver.

Dependencies:   X_NUCLEO_COMMON ST_INTERFACES

Dependents:   IHM03A1_ExampleFor1Motor HelloWorld_IHM03A1 IHM03A1_ExampleFor3Motors KYPHOS_Stepper_Motor_Control

Fork of X_NUCLEO_IHM03A1 by ST Expansion SW Team

Motor Control Library

Library to handle the X-NUCLEO-IHM03A1 Motor Control Expansion Board based on the Powerstep01 component.

It features the:

  • read and write of Powerstep01 registers
  • Nucleo and expansion board configuration (GPIOs, PWMs, IRQs, etc.)
  • Powerstep01 application commands handling
  • FLAG and BUSY interrupt handling (alarm reporting)
  • Daisy chain handling

The API allows to easily:

  • perform various positioning, moves and stops
  • get/set or monitor the motor positions
  • set home position and mark another position
  • get/set minimum and maximum speed
  • get current speed
  • get/set acceleration and deceleration
  • get/set the step mode (up to 1/128)
  • get/set the control method
  • get/set parameters for voltage mode driving
  • get/set parameters for current mode driving
  • get/set parameters for gate driving
  • configure various protections such as overcurrent detection
  • enable/disable alarms
  • handle step-clock
  • get system status

Daisy-Chain Configuration

The IHM03A1 board can be stacked up to three times so that the Powerstep01 components will be connected in daisy-chain configuration. For this purpose, some resistors must be correctly connected on the boards as depicted here below:

/media/uploads/nucleosam/driving1steppermotor.png /media/uploads/nucleosam/driving2steppermotors.png /media/uploads/nucleosam/driving3steppermotors.png

Platform compatibility

Compatible platforms have been tested with the default configuration provided by the HelloWorld_IHM03A1 example.

Revision:
0:00a3c3f5a8f0
Child:
1:8ce2a5d6fbf8
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/Interfaces/Component_class.h	Tue Apr 05 15:18:56 2016 +0000
@@ -0,0 +1,83 @@
+/**
+ ******************************************************************************
+ * @file    Component_class.h
+ * @author  AST
+ * @version V1.0.0
+ * @date    April 13th, 2015
+ * @brief   This file contains the abstract class describing the interface of a
+ *          generic component.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+
+#ifndef __COMPONENT_CLASS_H
+#define __COMPONENT_CLASS_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include <stdint.h>
+
+
+/* Classes  ------------------------------------------------------------------*/
+
+/** An abstract class for Generic components.
+ */
+class Component
+{
+public:
+    /**
+     * @brief     Initializing the component.
+     * @param[in] init pointer to device specific initalization structure.
+     * @retval    "0" in case of success, an error code otherwise.
+     */
+    virtual int Init(void *init) = 0;
+
+    /**
+     * @brief      Getting the ID of the component.
+     * @param[out] id pointer to an allocated variable to store the ID into.
+     * @retval     "0" in case of success, an error code otherwise.
+     */
+    virtual int ReadID(uint8_t *id) = 0;
+    
+    /**
+     * @brief  Getting the version of the firmware.
+     * @param  None.
+     * @retval The version of the firmware.
+     */
+    virtual unsigned int GetFwVersion(void) = 0;
+
+};
+
+#endif /* __COMPONENT_CLASS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/