ST / X_NUCLEO_IDW01M1v2

X-NUCLEO-IDW01M1 Wi-Fi expansion board mbed OS 2 ("Classic") library. mbed OS 5 library also available (see below).

Dependencies:   SPWF01SA

Dependents:   SpwfInterface_NSAPI_Testsv2 Nucleo_read_a0_thingspace Nucleo_read_a0_thingspace_mems Cayenne-X-NUCLEO-IDW01M1 ... more

Fork of X_NUCLEO_IDW01M1v2 by ST Expansion SW Team

Introduction

X_NUCLEO_IDW01M1 is a mbed library for the Wi-Fi expansion board X-NUCLEO-IDW01M1 compatible with STM32 Nucleo.

The software can be used for building Wi-Fi applications with the SPWF01SA module. It is an implementation of the NetworkSocketAPI library from mbed OS 2 ("Classic").
mbed OS 5 library can instead be found at this link.

Firmware Library

The X_NUCLEO_IDW01M1 library comes with a sample application (HelloWorld_IDW01M1v2) and a NSAPI test suite application (SpwfInterface_NSAPI_Testsv2).

This library is only supported on NUCLEO platforms and any platforms with Arduino connector. However connection to arduino needs to be done manually using 4 wires for Vdd, Gnd, Rx and Tx. Example applications have more specific details on exact connections to be used.

The features of the library are :

• Supports mbed OS 2 ("Classic") NetworkSocketAPI
• Supports both client sockets
• Configuration of USART pins to be used

Class SpwfSAInterface is intended to represent the X-NUCLEO-IDW01M1 expansion board with the SPWF module.

The expansion board is basically featuring the component:

1. a SPWF01SA Serial-to-Wi-Fi module

Example Applications

• HelloWorld_IDW01M1v2

NSAPI Test Suite

• SpwfInterface_NSAPI_Testsv2

--- a/SpwfInterface.cpp	Thu Jul 07 06:45:32 2016 +0000
+++ b/SpwfInterface.cpp	Thu Jul 07 11:06:10 2016 +0000
@@ -298,7 +298,7 @@
 int SpwfSAInterface::socket_send(void *handle, const void *data, unsigned size)
 {    
     struct spwf_socket *socket = (struct spwf_socket *)handle;
-    int err;
+    //int err;
     
     /*if(socket->id==SERVER_SOCKET_NO)
         {
@@ -308,11 +308,14 @@
             err = _spwf.socket_server_write((uint16_t)size, (char*)data);
         }
     else
-        {*/
+        {
             err = _spwf.send(socket->id, (char*)data, (uint32_t)size);
-        //}
-    
-    return err;
+        }*/
+    if (!_spwf.send(socket->id, (char*)data, (uint32_t)size)) {
+        return NSAPI_ERROR_DEVICE_ERROR;
+    }
+ 
+    return size;
 }
 
 /**
@@ -332,6 +335,7 @@
     //CHECK:Receive for both Client and Server Sockets same?
     recv = _spwf.recv(socket->id, (char*)data, (uint32_t)size);    
     if (recv < 0) {
+        //printf("ret -1\r\n");
         return NSAPI_ERROR_WOULD_BLOCK;
     }
     return recv;