BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: module.json
- Revision:
- 132:51056160fa4a
- Parent:
- 131:e09947216ccb
- Child:
- 139:3a75965fd389
--- a/module.json Tue Oct 06 15:19:19 2015 +0200 +++ b/module.json Wed Oct 07 08:39:04 2015 +0200 @@ -18,14 +18,14 @@ "type": "Apache-2.0" } ], - "extraIncludes": [ + "extraIncludes": [ "x-nucleo-idb0xa1", - "x-nucleo-idb0xa1/utils/inc", - "x-nucleo-idb0xa1/platform/inc", - "x-nucleo-idb0xa1/BlueNRG_HCI/includes", - "x-nucleo-idb0xa1/platform/X-NUCLEO-IDB04A1" + "x-nucleo-idb0xa1/utils", + "x-nucleo-idb0xa1/platform", + "x-nucleo-idb0xa1/bluenrg-hci" ], "dependencies": { - "ble": "*" + "ble": "*", + "core-util": "~0.2.0" } }