ST / X_NUCLEO_IDB0XA1

BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)

Dependents:   Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more

Fork of X_NUCLEO_IDB0XA1 by ST Expansion SW Team

Arduino Connector Compatibility Warning

X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13 for the SPI clock, they use pin D3. The default configuration for this library is having the SPI clock on pin D3.

To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.

For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10 and instead soldering zero resistor R11. For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4 and instead soldering zero resistor R6.

In case you patch your board, then you also have to configure this library to use pin D13 to drive the SPI clock (see macro IDB0XA1_D13_PATCH in file x_nucleo_idb0xa1_targets.h).

If you use pin D13 for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13.

Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.

Revisions of source/BlueNRGDevice.cpp

Revision Date Message Actions
293:5a1f577bf92f 2016-09-15 Sync with 8247cc25d48b37d6a78a3e91c728cbbf0fd9ba29 File  Diff  Annotate
278:a5209d8cfd61 2016-09-15 Sync with 117ed4c55629877d7cb3d79c4bcb24e7da5bcab0 File  Diff  Annotate
273:00205952d841 2016-09-15 Sync with dc54644b61c51990e49672e5bbce3b95124d6364 File  Diff  Annotate
264:1e754a01869e 2016-09-15 Sync with e9fb3e390284c3f7ef8e1d21cc55deef7558ca3d File  Diff  Annotate
271:7dc6261c33e5 2016-09-15 Sync with 2819f05ab09fdabd46030bb6eab6b01aad1fa2db File  Diff  Annotate
253:9665a6f8bbdb 2016-09-15 Sync with 4607c9b8b84bb61287ac96092cab09641a8e8c37\nMinor adjustements to sync with the github repository at this point in time. File  Diff  Annotate
247:932a44bdff4f 2016-06-21 Merge branch 'master' into mbed_classic File  Diff  Annotate
246:d73c4f798379 2016-06-21 Change inizialization sequence File  Diff  Annotate
245:6830f71c197c 2016-06-20 Implement BlueNRG/BlueNRG-MS firmware update File  Diff  Annotate
242:058b2e731adc 2016-06-20 Merge branch 'master' into mbed_classic File  Diff  Annotate
229:9981f62cdb1a 2016-05-16 Fix issues and add features File  Diff  Annotate
216:7aa807180321 2016-03-31 Fix getVersion() and shutdown() APIs and minor change File  Diff  Annotate
191:d22cc4715b0c 2015-11-20 Merge branch 'master' of https://github.com/ARMmbed/ble-x-nucleo-idb0xa1 into mbed_classic File  Diff  Annotate
183:3bc6d59b9c81 2015-11-19 Remove 'rising/falling edge' workaround File  Diff  Annotate
177:65d9b1b75fca 2015-11-18 Provide mbed classic compatibility File  Diff  Annotate
173:821942ac7d5a 2015-11-10 Move BlueNRG irq/glitch workaround to 'x-nucleo-idb0xa1' File  Diff  Annotate
169:485bbcddf0c3 2015-11-05 Change irq mode File  Diff  Annotate
168:ad1dff5dca1f 2015-11-04 Remove instance variable 'instanceID' File  Diff  Annotate
167:abc42e7158a6 2015-11-04 Synch with BLE API 2.0.3 File  Diff  Annotate
144:bdf5e8432131 2015-10-21 Get rid of warnings File  Diff  Annotate
139:3a75965fd389 2015-10-08 Manually merge modifications as suggested from Rohit & Andrea in Andrea's mail of 10/07/2015 04:20 PM File  Diff  Annotate
132:51056160fa4a 2015-10-07 Andrea's version as of mail from 10/06/2015 05:56 PM File  Diff  Annotate
130:770ce14d3d15 2015-10-06 Include mbed-classic version File  Diff  Annotate