BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: source/platform/btle.cpp
- Revision:
- 241:c13c2e31316d
- Parent:
- 235:31b976a40f43
- Child:
- 245:6830f71c197c
--- a/source/platform/btle.cpp Thu Jun 16 13:35:47 2016 +0200 +++ b/source/platform/btle.cpp Mon Jun 20 14:42:11 2016 +0200 @@ -42,6 +42,8 @@ #include "BlueNRGGattClient.h" #include "Utils.h" +#include "x_nucleo_idb0xa1_targets.h" + #ifdef __cplusplus extern "C" { #endif @@ -71,8 +73,8 @@ #define IDB04A1 0 #define IDB05A1 1 -// Stack Mode 0x04 allows Simultaneous Scanning and Advertisement (SSAdv) -#define STACK_MODE (0x04) +/* See file 'x_nucleo_idb0xa1_targets.h' for details regarding the IDB0XA1 STACK_MODE */ +#define STACK_MODE IDB0XA1_STACK_MODE void HCI_Input(tHciDataPacket * hciReadPacket);