BLE_API wrapper library for STMicroelectronics' BlueNRG Bluetooth Low Energy expansion board shield (Component)
Dependents: Nucleo_Zumo_BLE_IDB04A1 contest_IOT5 contest_IOT6 contest_IOT_10 ... more
Fork of X_NUCLEO_IDB0XA1 by
Arduino Connector Compatibility Warning
X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 are Arduino compatible with an exception: instead of using pin D13
for the SPI clock, they use pin D3
.
The default configuration for this library is having the SPI clock on pin D3
.
To be fully Arduino compatible, X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 need a small HW patch.
For X-NUCLEO-IDB04A1 this patch consists in removing zero resistor R10
and instead soldering zero resistor R11
.
For X-NUCLEO-IDB05A1 this patch consists in removing zero resistor R4
and instead soldering zero resistor R6
.
In case you patch your board, then you also have to configure this library to use pin D13
to drive the SPI clock (see macro IDB0XA1_D13_PATCH
in file x_nucleo_idb0xa1_targets.h
).
If you use pin D13
for the SPI clock, please be aware that on STM32 Nucleo boards you may not drive the LED, otherwise you will get a conflict: the LED on STM32 Nucleo boards is connected to pin D13
.
Referring to the current list of tested platforms (see X-NUCLEO-IDB04A1 and X-NUCLEO-IDB05A1 pages), the patch is required by ST-Nucleo-F103RB; ST-Nucleo-F302R8; ST-Nucleo-F411RE; and ST-Nucleo-F446RE.
Diff: x-nucleo-idb0xa1/utils/Payload.h
- Revision:
- 242:058b2e731adc
- Parent:
- 180:b2a22cb6c87c
- Parent:
- 236:2a73f3a97452
- Child:
- 252:0c2cb16a7166
--- a/x-nucleo-idb0xa1/utils/Payload.h Fri Mar 18 12:10:20 2016 +0100 +++ b/x-nucleo-idb0xa1/utils/Payload.h Mon Jun 20 14:59:06 2016 +0200 @@ -67,6 +67,7 @@ public: Payload(const uint8_t *tokenString, uint8_t string_ength); Payload(); + ~Payload(); uint8_t getPayloadUnitCount(); uint8_t getIDAtIndex(int index); @@ -180,7 +181,11 @@ int getPayloadUnitCount() { return payloadUnitCount; } - + ~PayloadPtr() { + if(unit) delete[] unit; + + unit = NULL; + } }; #endif // __PAYLOAD_H__