Diff: x_nucleo_53l0a1.h.orig

Revision:

16:27d3d95c8593

Parent:

14:8320b5ff96fa

Child:

17:f8187a3fa36e

diff -r 8320b5ff96fa -r 27d3d95c8593 x_nucleo_53l0a1.h.orig
--- a/x_nucleo_53l0a1.h.orig	Mon Aug 07 14:30:21 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,198 +0,0 @@
-/**
- ******************************************************************************
- * @file    x_nucleo_53L0A1.h
- * @author  IMG 
- * @version V1.0.0
- * @date    28-November-2016
- * @brief   Header file for class X_NUCLEO_53L0A1 representing a X-NUCLEO-53L0A1
- *          expansion board
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent from recursive inclusion --------------------------------*/
-#ifndef __X_NUCLEO_53L0A1_H
-#define __X_NUCLEO_53L0A1_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "vl53l0x_class.h"
-#include "Display_class.h"
-#include "stmpe1600_class.h"
-#include "DevI2C.h"
-
-/** New device addresses */
-//#define NEW_SENSOR_CENTRE_ADDRESS		0x54
-#define NEW_SENSOR_CENTRE_ADDRESS		0x52
-#define NEW_SENSOR_LEFT_ADDRESS			0x56
-#define NEW_SENSOR_RIGHT_ADDRESS		0x58
-
-/* Classes--------------------------------------------------------------------*/
-
-/* Classes -------------------------------------------------------------------*/
-/** Class representing the X-NUCLEO-VL53L0A1 expansion board
- */
-class X_NUCLEO_53L0A1
-{
-public:
-     /** Constructor 1
-     * @param[in] &i2c device I2C to be used for communication
-     */
-    X_NUCLEO_53L0A1(DevI2C *ext_i2c) : dev_i2c(ext_i2c)
-    {
-        stmpe1600_exp0 = new STMPE1600(*ext_i2c, (0x43 * 2)); // U21
-        stmpe1600_exp0->writeSYS_CTRL (SOFT_RESET);
-
-        stmpe1600_exp1 = new STMPE1600(*ext_i2c, (0x42 * 2)); // U19
-        stmpe1600_exp1->writeSYS_CTRL (SOFT_RESET);
-
-        display = new Display(*stmpe1600_exp0, *stmpe1600_exp1);
-			
-        xshutdown_centre=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x42 * 2)); // U19 on schematic
-        sensor_centre=new VL53L0X(*dev_i2c, *xshutdown_centre, A2);
-       
-        xshutdown_left=new STMPE1600DigiOut(*dev_i2c, GPIO_14, (0x43 * 2)); // U21 on schematic
-        sensor_left=new VL53L0X(*dev_i2c, *xshutdown_left, D8);
-       
-        xshutdown_right=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x43 * 2)); // U21 on schematic
-        sensor_right=new VL53L0X(*dev_i2c, *xshutdown_right, D2);
-    }
-    
-    /** Constructor 2
-     * @param[in] &i2c device I2C to be used for communication
-     * @param[in] PinName gpio1_top Mbed DigitalOut pin name to be used as a top sensor GPIO_1 INT
-     * @param[in] PinName gpio1_bottom Mbed DigitalOut pin name to be used as a bottom sensor GPIO_1 INT
-     * @param[in] PinName gpio1_left Mbed DigitalOut pin name to be used as a left sensor GPIO_1 INT
-     * @param[in] PinName gpio1_right Mbed DigitalOut pin name to be used as a right sensor GPIO_1 INT               
-     */    
-    X_NUCLEO_53L0A1(DevI2C *ext_i2c, PinName gpio1_centre,
-    		 						  PinName gpio1_left, PinName gpio1_right) : dev_i2c(ext_i2c) {
-        stmpe1600_exp0 = new STMPE1600(*ext_i2c, (0x43 * 2)); // U21
-        stmpe1600_exp0->writeSYS_CTRL(SOFT_RESET);
-
-        stmpe1600_exp1 = new STMPE1600(*ext_i2c, (0x42 * 2)); // U19
-        stmpe1600_exp1->writeSYS_CTRL(SOFT_RESET);
-
-        display = new Display(*stmpe1600_exp0, *stmpe1600_exp1);
-
-       xshutdown_centre=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x42 * 2)); // U19 on schematic
-       sensor_centre=new VL53L0X(*dev_i2c, *xshutdown_centre, gpio1_centre);
-       
-       xshutdown_left=new STMPE1600DigiOut(*dev_i2c, GPIO_14, (0x43 * 2)); // U21 on schematic
-       sensor_left=new VL53L0X(*dev_i2c, *xshutdown_left, gpio1_left);
-       
-       xshutdown_right=new STMPE1600DigiOut(*dev_i2c, GPIO_15, (0x43 * 2)); // U21 on schematic
-       sensor_right=new VL53L0X(*dev_i2c, *xshutdown_right, gpio1_right);
-    }  
-
-   /** Destructor
-    */		
-    ~X_NUCLEO_53L0A1()
-    {
-        if(xshutdown_centre!=NULL)
-        {
-           delete xshutdown_centre;
-           xshutdown_centre=NULL;
-        }
-       if(sensor_centre!=NULL)
-       {
-          delete sensor_centre;
-	        sensor_centre=NULL;
-       }
-       if(xshutdown_left!=NULL)
-       {
-          delete xshutdown_left;
-          xshutdown_left=NULL;
-       }
-       if(sensor_left!=NULL)
-       {
-          delete sensor_left;
-	        sensor_left=NULL;
-       }
-       if(xshutdown_right!=NULL)
-       {
-          delete xshutdown_right;
-          xshutdown_right=NULL;
-       }
-       if(sensor_right!=NULL)
-       {
-          delete sensor_right;
-	        sensor_right=NULL;
-       }
-
-	   delete stmpe1600_exp0;
-	   stmpe1600_exp0 = NULL;
-	   delete stmpe1600_exp1;
-	   stmpe1600_exp1 = NULL;
-	   delete display;
-	   display = NULL;
-       _instance=NULL;
-    }
-
-	/**
-	 * @brief       Creates a singleton object instance
-     * @param[in]   &i2c device I2C to be used for communication
-	 * @return      Pointer to the object instance
-	 */					     
-    static X_NUCLEO_53L0A1 *Instance(DevI2C *ext_i2c);
-    
-	/**
-	 * @brief       Creates a singleton object instance
-     * @param[in]   &i2c device I2C to be used for communication
-     * @param[in]   PinName gpio1_centre the pin connected to top sensor INT     
-     * @param[in]   PinName gpio1_left the pin connected to left sensor INT          
-     * @param[in]   PinName gpio1_right the pin connected to right sensor INT          
-	 * @return      Pointer to the object instance
-	 */					         
-    static X_NUCLEO_53L0A1 *Instance(DevI2C *ext_i2c, PinName gpio1_centre, 
-                                             PinName gpio1_left, PinName gpio1_right);
-
-	/**
-	 * @brief       Initialize the board and sensors with deft values
-	 * @return      0 on success
-	 */		
-    int InitBoard();
-
-    DevI2C *dev_i2c;
-    VL53L0X *sensor_centre;
-    VL53L0X *sensor_left;
-    VL53L0X *sensor_right;
-  	STMPE1600 *stmpe1600_exp0;
-  	STMPE1600 *stmpe1600_exp1;
-    STMPE1600DigiOut *xshutdown_centre;
-    STMPE1600DigiOut *xshutdown_left;
-    STMPE1600DigiOut *xshutdown_right;
-    Display *display;
-    
- private:		 		
-    static X_NUCLEO_53L0A1 *_instance;
-};
-
-#endif /* __X_NUCLEO_53L0A1_H */
-
-