Library for use with VL53L0X, cut 1.1, based on mass-market API v1.1.
Fork of X_NUCLEO_53L0A1 by
X-NUCLEO-53L0A1 Proximity Sensor Expansion Board Firmware Package
This firmware package includes Component Device Drivers and the Board Support Package for STMicroelectronics' X-NUCLEO-53L0A1 Proximity sensor expansion board based on VL53L0X.
Class X_NUCLEO_53L0A1 is intended to represent the Proximity sensor expansion board with the same name.
The expansion board provides support for the following components:
- on-board VL53L0X proximity sensor,
- up to two additional VL53L0X Satellites,
- on-board 4-digit display
It is intentionally implemented as a singleton because only one X-NUCLEO-VL53L0A1 may be deployed at a time in a HW component stack. In order to get the singleton instance you have to call class method `Instance()`, e.g.:
// Sensors expansion board singleton instance static X_NUCLEO_53L0A1 *board = X_NUCLEO_53L0A1::Instance(device_i2c, A2, D8, D2);
- Hello World 53L0
- Display 53L0A1
- Display 53L0A1 Interrupts
- Display 53L0A1 with satellites
- 53L0A1 Satellites with Interrupts
The library and sample application code were tested against mbed revision 143, dated 26th May 2017.
2017-12-18, by mapellil [Mon, 18 Dec 2017 09:52:09 +0000] rev 21
Updated 53L0 lib
2017-12-15, by mapellil [Fri, 15 Dec 2017 14:13:04 +0000] rev 20
Added vl53l0x_get_device() to extend API usability
2017-10-13, by Davidroid [Fri, 13 Oct 2017 22:04:16 +0000] rev 19
2017-10-13, by Davidroid [Fri, 13 Oct 2017 15:32:03 +0000] rev 18
2017-10-10, by nikapov [Tue, 10 Oct 2017 08:48:41 +0000] rev 17
Support external component.
2017-08-22, by Davidroid [Tue, 22 Aug 2017 14:39:51 +0000] rev 16
Aligning to ARM mbed coding style.
2017-08-08, by johnAlexander [Tue, 08 Aug 2017 14:41:03 +0000] rev 15
Update references in all board components to allow continued use of DevI2C from X_Nucleo_Common.
2017-08-07, by johnAlexander [Mon, 07 Aug 2017 14:30:21 +0000] rev 14
Aligned to ARM mbed coding style.
2017-06-15, by johnAlexander [Thu, 15 Jun 2017 13:33:35 +0000] rev 13
Refactor interrupt setup in StartMeasurement, for range_continuous_interrupt mode.
2017-06-14, by johnAlexander [Wed, 14 Jun 2017 14:39:27 +0000] rev 12
Add ranging_continuous_interrupt support.