Library for use with VL53L0X, cut 1.1, based on mass-market API v1.1.
Dependencies: ST_INTERFACES X_NUCLEO_COMMON
Dependents: ConcorsoFinal HelloWorld_IHM01A1 m3pi_BT m3pi_LIDAR ... more
Fork of X_NUCLEO_53L0A1 by
X-NUCLEO-53L0A1 Proximity Sensor Expansion Board Firmware Package
Introduction
This firmware package includes Component Device Drivers and the Board Support Package for STMicroelectronics' X-NUCLEO-53L0A1 Proximity sensor expansion board based on VL53L0X.
Firmware Library
Class X_NUCLEO_53L0A1 is intended to represent the Proximity sensor expansion board with the same name.
The expansion board provides support for the following components:
- on-board VL53L0X proximity sensor,
- up to two additional VL53L0X Satellites,
- on-board 4-digit display
It is intentionally implemented as a singleton because only one X-NUCLEO-VL53L0A1 may be deployed at a time in a HW component stack. In order to get the singleton instance you have to call class method `Instance()`, e.g.:
// Sensors expansion board singleton instance static X_NUCLEO_53L0A1 *board = X_NUCLEO_53L0A1::Instance(device_i2c, A2, D8, D2);
Example Applications
- Hello World 53L0
- Display 53L0A1
- Display 53L0A1 Interrupts
- Display 53L0A1 with satellites
- 53L0A1 Satellites with Interrupts
- 53L0A1_HandGestureRecognition
The library and sample application code were tested against mbed revision 143, dated 26th May 2017.
Components/VL53L0X/vl53l0x_interrupt_threshold_settings.h
- Committer:
- johnAlexander
- Date:
- 2016-11-28
- Revision:
- 0:c523920bcc09
File content as of revision 0:c523920bcc09:
/*******************************************************************************
Copyright © 2016, STMicroelectronics International N.V.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of STMicroelectronics nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#ifndef _VL53L0X_INTERRUPT_THRESHOLD_SETTINGS_H_
#define _VL53L0X_INTERRUPT_THRESHOLD_SETTINGS_H_
#ifdef __cplusplus
extern "C" {
#endif
uint8_t InterruptThresholdSettings[] = {
/* Start of Interrupt Threshold Settings */
0x1, 0xff, 0x00,
0x1, 0x80, 0x01,
0x1, 0xff, 0x01,
0x1, 0x00, 0x00,
0x1, 0xff, 0x01,
0x1, 0x4f, 0x02,
0x1, 0xFF, 0x0E,
0x1, 0x00, 0x03,
0x1, 0x01, 0x84,
0x1, 0x02, 0x0A,
0x1, 0x03, 0x03,
0x1, 0x04, 0x08,
0x1, 0x05, 0xC8,
0x1, 0x06, 0x03,
0x1, 0x07, 0x8D,
0x1, 0x08, 0x08,
0x1, 0x09, 0xC6,
0x1, 0x0A, 0x01,
0x1, 0x0B, 0x02,
0x1, 0x0C, 0x00,
0x1, 0x0D, 0xD5,
0x1, 0x0E, 0x18,
0x1, 0x0F, 0x12,
0x1, 0x10, 0x01,
0x1, 0x11, 0x82,
0x1, 0x12, 0x00,
0x1, 0x13, 0xD5,
0x1, 0x14, 0x18,
0x1, 0x15, 0x13,
0x1, 0x16, 0x03,
0x1, 0x17, 0x86,
0x1, 0x18, 0x0A,
0x1, 0x19, 0x09,
0x1, 0x1A, 0x08,
0x1, 0x1B, 0xC2,
0x1, 0x1C, 0x03,
0x1, 0x1D, 0x8F,
0x1, 0x1E, 0x0A,
0x1, 0x1F, 0x06,
0x1, 0x20, 0x01,
0x1, 0x21, 0x02,
0x1, 0x22, 0x00,
0x1, 0x23, 0xD5,
0x1, 0x24, 0x18,
0x1, 0x25, 0x22,
0x1, 0x26, 0x01,
0x1, 0x27, 0x82,
0x1, 0x28, 0x00,
0x1, 0x29, 0xD5,
0x1, 0x2A, 0x18,
0x1, 0x2B, 0x0B,
0x1, 0x2C, 0x28,
0x1, 0x2D, 0x78,
0x1, 0x2E, 0x28,
0x1, 0x2F, 0x91,
0x1, 0x30, 0x00,
0x1, 0x31, 0x0B,
0x1, 0x32, 0x00,
0x1, 0x33, 0x0B,
0x1, 0x34, 0x00,
0x1, 0x35, 0xA1,
0x1, 0x36, 0x00,
0x1, 0x37, 0xA0,
0x1, 0x38, 0x00,
0x1, 0x39, 0x04,
0x1, 0x3A, 0x28,
0x1, 0x3B, 0x30,
0x1, 0x3C, 0x0C,
0x1, 0x3D, 0x04,
0x1, 0x3E, 0x0F,
0x1, 0x3F, 0x79,
0x1, 0x40, 0x28,
0x1, 0x41, 0x1E,
0x1, 0x42, 0x2F,
0x1, 0x43, 0x87,
0x1, 0x44, 0x00,
0x1, 0x45, 0x0B,
0x1, 0x46, 0x00,
0x1, 0x47, 0x0B,
0x1, 0x48, 0x00,
0x1, 0x49, 0xA7,
0x1, 0x4A, 0x00,
0x1, 0x4B, 0xA6,
0x1, 0x4C, 0x00,
0x1, 0x4D, 0x04,
0x1, 0x4E, 0x01,
0x1, 0x4F, 0x00,
0x1, 0x50, 0x00,
0x1, 0x51, 0x80,
0x1, 0x52, 0x09,
0x1, 0x53, 0x08,
0x1, 0x54, 0x01,
0x1, 0x55, 0x00,
0x1, 0x56, 0x0F,
0x1, 0x57, 0x79,
0x1, 0x58, 0x09,
0x1, 0x59, 0x05,
0x1, 0x5A, 0x00,
0x1, 0x5B, 0x60,
0x1, 0x5C, 0x05,
0x1, 0x5D, 0xD1,
0x1, 0x5E, 0x0C,
0x1, 0x5F, 0x3C,
0x1, 0x60, 0x00,
0x1, 0x61, 0xD0,
0x1, 0x62, 0x0B,
0x1, 0x63, 0x03,
0x1, 0x64, 0x28,
0x1, 0x65, 0x10,
0x1, 0x66, 0x2A,
0x1, 0x67, 0x39,
0x1, 0x68, 0x0B,
0x1, 0x69, 0x02,
0x1, 0x6A, 0x28,
0x1, 0x6B, 0x10,
0x1, 0x6C, 0x2A,
0x1, 0x6D, 0x61,
0x1, 0x6E, 0x0C,
0x1, 0x6F, 0x00,
0x1, 0x70, 0x0F,
0x1, 0x71, 0x79,
0x1, 0x72, 0x00,
0x1, 0x73, 0x0B,
0x1, 0x74, 0x00,
0x1, 0x75, 0x0B,
0x1, 0x76, 0x00,
0x1, 0x77, 0xA1,
0x1, 0x78, 0x00,
0x1, 0x79, 0xA0,
0x1, 0x7A, 0x00,
0x1, 0x7B, 0x04,
0x1, 0xFF, 0x04,
0x1, 0x79, 0x1D,
0x1, 0x7B, 0x27,
0x1, 0x96, 0x0E,
0x1, 0x97, 0xFE,
0x1, 0x98, 0x03,
0x1, 0x99, 0xEF,
0x1, 0x9A, 0x02,
0x1, 0x9B, 0x44,
0x1, 0x73, 0x07,
0x1, 0x70, 0x01,
0x1, 0xff, 0x01,
0x1, 0x00, 0x01,
0x1, 0xff, 0x00,
0x00, 0x00, 0x00
};
#ifdef __cplusplus
}
#endif
#endif /* _VL53L0X_INTERRUPT_THRESHOLD_SETTINGS_H_ */

X-NUCLEO-53L0A1 Ranging Sensor Expansion Board