Library for use with VL53L0X, cut 1.1, based on mass-market API v1.1.
Dependencies: ST_INTERFACES X_NUCLEO_COMMON
Dependents: ConcorsoFinal HelloWorld_IHM01A1 m3pi_BT m3pi_LIDAR ... more
Fork of X_NUCLEO_53L0A1 by
X-NUCLEO-53L0A1 Proximity Sensor Expansion Board Firmware Package
Introduction
This firmware package includes Component Device Drivers and the Board Support Package for STMicroelectronics' X-NUCLEO-53L0A1 Proximity sensor expansion board based on VL53L0X.
Firmware Library
Class X_NUCLEO_53L0A1 is intended to represent the Proximity sensor expansion board with the same name.
The expansion board provides support for the following components:
- on-board VL53L0X proximity sensor,
- up to two additional VL53L0X Satellites,
- on-board 4-digit display
It is intentionally implemented as a singleton because only one X-NUCLEO-VL53L0A1 may be deployed at a time in a HW component stack. In order to get the singleton instance you have to call class method `Instance()`, e.g.:
// Sensors expansion board singleton instance static X_NUCLEO_53L0A1 *board = X_NUCLEO_53L0A1::Instance(device_i2c, A2, D8, D2);
Example Applications
- Hello World 53L0
- Display 53L0A1
- Display 53L0A1 Interrupts
- Display 53L0A1 with satellites
- 53L0A1 Satellites with Interrupts
- 53L0A1_HandGestureRecognition
The library and sample application code were tested against mbed revision 143, dated 26th May 2017.
Diff: Components/VL53L0X/vl53l0x_tuning.h
- Revision:
- 0:c523920bcc09
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL53L0X/vl53l0x_tuning.h Mon Nov 28 11:25:33 2016 +0000
@@ -0,0 +1,147 @@
+/*******************************************************************************
+Copyright © 2016, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ * Neither the name of STMicroelectronics nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*******************************************************************************/
+
+
+#ifndef _VL53L0X_TUNING_H_
+#define _VL53L0X_TUNING_H_
+
+#include "vl53l0x_def.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+uint8_t DefaultTuningSettings[] = {
+
+ /* update 02/11/2015_v36 */
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x00, 0x00,
+
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x09, 0x00,
+ 0x01, 0x10, 0x00,
+ 0x01, 0x11, 0x00,
+
+ 0x01, 0x24, 0x01,
+ 0x01, 0x25, 0xff,
+ 0x01, 0x75, 0x00,
+
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x4e, 0x2c,
+ 0x01, 0x48, 0x00,
+ 0x01, 0x30, 0x20,
+
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x30, 0x09, /* mja changed from 0x64. */
+ 0x01, 0x54, 0x00,
+ 0x01, 0x31, 0x04,
+ 0x01, 0x32, 0x03,
+ 0x01, 0x40, 0x83,
+ 0x01, 0x46, 0x25,
+ 0x01, 0x60, 0x00,
+ 0x01, 0x27, 0x00,
+ 0x01, 0x50, 0x06,
+ 0x01, 0x51, 0x00,
+ 0x01, 0x52, 0x96,
+ 0x01, 0x56, 0x08,
+ 0x01, 0x57, 0x30,
+ 0x01, 0x61, 0x00,
+ 0x01, 0x62, 0x00,
+ 0x01, 0x64, 0x00,
+ 0x01, 0x65, 0x00,
+ 0x01, 0x66, 0xa0,
+
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x22, 0x32,
+ 0x01, 0x47, 0x14,
+ 0x01, 0x49, 0xff,
+ 0x01, 0x4a, 0x00,
+
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x7a, 0x0a,
+ 0x01, 0x7b, 0x00,
+ 0x01, 0x78, 0x21,
+
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x23, 0x34,
+ 0x01, 0x42, 0x00,
+ 0x01, 0x44, 0xff,
+ 0x01, 0x45, 0x26,
+ 0x01, 0x46, 0x05,
+ 0x01, 0x40, 0x40,
+ 0x01, 0x0E, 0x06,
+ 0x01, 0x20, 0x1a,
+ 0x01, 0x43, 0x40,
+
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x34, 0x03,
+ 0x01, 0x35, 0x44,
+
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x31, 0x04,
+ 0x01, 0x4b, 0x09,
+ 0x01, 0x4c, 0x05,
+ 0x01, 0x4d, 0x04,
+
+
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x44, 0x00,
+ 0x01, 0x45, 0x20,
+ 0x01, 0x47, 0x08,
+ 0x01, 0x48, 0x28,
+ 0x01, 0x67, 0x00,
+ 0x01, 0x70, 0x04,
+ 0x01, 0x71, 0x01,
+ 0x01, 0x72, 0xfe,
+ 0x01, 0x76, 0x00,
+ 0x01, 0x77, 0x00,
+
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x0d, 0x01,
+
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x80, 0x01,
+ 0x01, 0x01, 0xF8,
+
+ 0x01, 0xFF, 0x01,
+ 0x01, 0x8e, 0x01,
+ 0x01, 0x00, 0x01,
+ 0x01, 0xFF, 0x00,
+ 0x01, 0x80, 0x00,
+
+ 0x00, 0x00, 0x00
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _VL53L0X_TUNING_H_ */
+

X-NUCLEO-53L0A1 Ranging Sensor Expansion Board