ST
Library for use with VL53L0X, cut 1.1, based on mass-market API v1.1.
Dependencies: ST_INTERFACES X_NUCLEO_COMMON
Dependents: ConcorsoFinal HelloWorld_IHM01A1 m3pi_BT m3pi_LIDAR ... more
Fork of
X_NUCLEO_53L0A1
by 
ST Expansion SW Team
X-NUCLEO-53L0A1 Proximity Sensor Expansion Board Firmware Package
Introduction
This firmware package includes Component Device Drivers and the Board Support Package for STMicroelectronics' X-NUCLEO-53L0A1 Proximity sensor expansion board based on VL53L0X.
Firmware Library
Class X_NUCLEO_53L0A1 is intended to represent the Proximity sensor expansion board with the same name.
The expansion board provides support for the following components:
- on-board VL53L0X proximity sensor,
- up to two additional VL53L0X Satellites,
- on-board 4-digit display
It is intentionally implemented as a singleton because only one X-NUCLEO-VL53L0A1 may be deployed at a time in a HW component stack. In order to get the singleton instance you have to call class method `Instance()`, e.g.:
// Sensors expansion board singleton instance static X_NUCLEO_53L0A1 *board = X_NUCLEO_53L0A1::Instance(device_i2c, A2, D8, D2);
Example Applications
- Hello World 53L0
- Display 53L0A1
- Display 53L0A1 Interrupts
- Display 53L0A1 with satellites
- 53L0A1 Satellites with Interrupts
- 53L0A1_HandGestureRecognition
The library and sample application code were tested against mbed revision 143, dated 26th May 2017.
Diff: Components/VL53L0X/vl53l0x_class.cpp
- Revision:
- 14:8320b5ff96fa
- Parent:
- 13:615f7e38568c
- Child:
- 15:44e6c9013bff
--- a/Components/VL53L0X/vl53l0x_class.cpp Thu Jun 15 13:33:35 2017 +0000
+++ b/Components/VL53L0X/vl53l0x_class.cpp Mon Aug 07 14:30:21 2017 +0000
@@ -34,7 +34,7 @@
*
******************************************************************************
*/
-
+
/* Includes */
#include <stdlib.h>
@@ -49,13 +49,13 @@
/****************** define for i2c configuration *******************************/
-
+
#define TEMP_BUF_SIZE 64
/** Maximum buffer size to be used in i2c */
#define VL53L0X_MAX_I2C_XFER_SIZE 64 /* Maximum buffer size to be used in i2c */
#define VL53L0X_I2C_USER_VAR /* none but could be for a flag var to get/pass to mutex interruptible return flags and try again */
-
+
#define LOG_FUNCTION_START(fmt, ...) \
_LOG_FUNCTION_START(TRACE_MODULE_API, fmt, ##__VA_ARGS__)
@@ -74,1748 +74,1750 @@
#define REF_ARRAY_SPAD_10 10
uint32_t refArrayQuadrants[4] = {REF_ARRAY_SPAD_10, REF_ARRAY_SPAD_5,
- REF_ARRAY_SPAD_0, REF_ARRAY_SPAD_5 };
-
-
-
-
-VL53L0X_Error VL53L0X::VL53L0X_device_read_strobe(VL53L0X_DEV Dev)
+ REF_ARRAY_SPAD_0, REF_ARRAY_SPAD_5
+ };
+
+
+
+
+VL53L0X_Error VL53L0X::vl53l0x_device_read_strobe(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t strobe;
- uint32_t LoopNb;
- LOG_FUNCTION_START("");
-
- Status |= VL53L0X_WrByte(Dev, 0x83, 0x00);
-
- /* polling
- * use timeout to avoid deadlock*/
- if (Status == VL53L0X_ERROR_NONE) {
- LoopNb = 0;
- do {
- Status = VL53L0X_RdByte(Dev, 0x83, &strobe);
- if ((strobe != 0x00) || Status != VL53L0X_ERROR_NONE)
- break;
-
- LoopNb = LoopNb + 1;
- } while (LoopNb < VL53L0X_DEFAULT_MAX_LOOP);
-
- if (LoopNb >= VL53L0X_DEFAULT_MAX_LOOP)
- Status = VL53L0X_ERROR_TIME_OUT;
-
- }
-
- Status |= VL53L0X_WrByte(Dev, 0x83, 0x01);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t strobe;
+ uint32_t loop_nb;
+ LOG_FUNCTION_START("");
+
+ status |= vl53l0x_write_byte(dev, 0x83, 0x00);
+
+ /* polling
+ * use timeout to avoid deadlock*/
+ if (status == VL53L0X_ERROR_NONE) {
+ loop_nb = 0;
+ do {
+ status = vl53l0x_read_byte(dev, 0x83, &strobe);
+ if ((strobe != 0x00) || status != VL53L0X_ERROR_NONE)
+ break;
+
+ loop_nb = loop_nb + 1;
+ } while (loop_nb < VL53L0X_DEFAULT_MAX_LOOP);
+
+ if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP)
+ status = VL53L0X_ERROR_TIME_OUT;
+
+ }
+
+ status |= vl53l0x_write_byte(dev, 0x83, 0x01);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_info_from_device(VL53L0X_DEV Dev, uint8_t option)
+VL53L0X_Error VL53L0X::vl53l0x_get_info_from_device(VL53L0X_DEV dev, uint8_t option)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t byte;
- uint32_t TmpDWord;
- uint8_t ModuleId;
- uint8_t Revision;
- uint8_t ReferenceSpadCount = 0;
- uint8_t ReferenceSpadType = 0;
- uint32_t PartUIDUpper = 0;
- uint32_t PartUIDLower = 0;
- uint32_t OffsetFixed1104_mm = 0;
- int16_t OffsetMicroMeters = 0;
- uint32_t DistMeasTgtFixed1104_mm = 400 << 4;
- uint32_t DistMeasFixed1104_400_mm = 0;
- uint32_t SignalRateMeasFixed1104_400_mm = 0;
- char ProductId[19];
- char *ProductId_tmp;
- uint8_t ReadDataFromDeviceDone;
- FixPoint1616_t SignalRateMeasFixed400mmFix = 0;
- uint8_t NvmRefGoodSpadMap[VL53L0X_REF_SPAD_BUFFER_SIZE];
- int i;
-
-
- LOG_FUNCTION_START("");
-
- ReadDataFromDeviceDone = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- ReadDataFromDeviceDone);
-
- /* This access is done only once after that a GetDeviceInfo or
- * datainit is done*/
- if (ReadDataFromDeviceDone != 7) {
-
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x00);
-
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x06);
- Status |= VL53L0X_RdByte(Dev, 0x83, &byte);
- Status |= VL53L0X_WrByte(Dev, 0x83, byte|4);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x07);
- Status |= VL53L0X_WrByte(Dev, 0x81, 0x01);
-
- Status |= VL53L0X_PollingDelay(Dev);
-
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x01);
-
- if (((option & 1) == 1) &&
- ((ReadDataFromDeviceDone & 1) == 0)) {
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x6b);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- ReferenceSpadCount = (uint8_t)((TmpDWord >> 8) & 0x07f);
- ReferenceSpadType = (uint8_t)((TmpDWord >> 15) & 0x01);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x24);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
-
- NvmRefGoodSpadMap[0] = (uint8_t)((TmpDWord >> 24)
- & 0xff);
- NvmRefGoodSpadMap[1] = (uint8_t)((TmpDWord >> 16)
- & 0xff);
- NvmRefGoodSpadMap[2] = (uint8_t)((TmpDWord >> 8)
- & 0xff);
- NvmRefGoodSpadMap[3] = (uint8_t)(TmpDWord & 0xff);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x25);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- NvmRefGoodSpadMap[4] = (uint8_t)((TmpDWord >> 24)
- & 0xff);
- NvmRefGoodSpadMap[5] = (uint8_t)((TmpDWord >> 16)
- & 0xff);
- }
-
- if (((option & 2) == 2) &&
- ((ReadDataFromDeviceDone & 2) == 0)) {
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x02);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdByte(Dev, 0x90, &ModuleId);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x7B);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdByte(Dev, 0x90, &Revision);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x77);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- ProductId[0] = (char)((TmpDWord >> 25) & 0x07f);
- ProductId[1] = (char)((TmpDWord >> 18) & 0x07f);
- ProductId[2] = (char)((TmpDWord >> 11) & 0x07f);
- ProductId[3] = (char)((TmpDWord >> 4) & 0x07f);
-
- byte = (uint8_t)((TmpDWord & 0x00f) << 3);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x78);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- ProductId[4] = (char)(byte +
- ((TmpDWord >> 29) & 0x07f));
- ProductId[5] = (char)((TmpDWord >> 22) & 0x07f);
- ProductId[6] = (char)((TmpDWord >> 15) & 0x07f);
- ProductId[7] = (char)((TmpDWord >> 8) & 0x07f);
- ProductId[8] = (char)((TmpDWord >> 1) & 0x07f);
-
- byte = (uint8_t)((TmpDWord & 0x001) << 6);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x79);
-
- Status |= VL53L0X_device_read_strobe(Dev);
-
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- ProductId[9] = (char)(byte +
- ((TmpDWord >> 26) & 0x07f));
- ProductId[10] = (char)((TmpDWord >> 19) & 0x07f);
- ProductId[11] = (char)((TmpDWord >> 12) & 0x07f);
- ProductId[12] = (char)((TmpDWord >> 5) & 0x07f);
-
- byte = (uint8_t)((TmpDWord & 0x01f) << 2);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x7A);
-
- Status |= VL53L0X_device_read_strobe(Dev);
-
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- ProductId[13] = (char)(byte +
- ((TmpDWord >> 30) & 0x07f));
- ProductId[14] = (char)((TmpDWord >> 23) & 0x07f);
- ProductId[15] = (char)((TmpDWord >> 16) & 0x07f);
- ProductId[16] = (char)((TmpDWord >> 9) & 0x07f);
- ProductId[17] = (char)((TmpDWord >> 2) & 0x07f);
- ProductId[18] = '\0';
-
- }
-
- if (((option & 4) == 4) &&
- ((ReadDataFromDeviceDone & 4) == 0)) {
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x7B);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &PartUIDUpper);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x7C);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &PartUIDLower);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x73);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- SignalRateMeasFixed1104_400_mm = (TmpDWord &
- 0x0000000ff) << 8;
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x74);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- SignalRateMeasFixed1104_400_mm |= ((TmpDWord &
- 0xff000000) >> 24);
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x75);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- DistMeasFixed1104_400_mm = (TmpDWord & 0x0000000ff)
- << 8;
-
- Status |= VL53L0X_WrByte(Dev, 0x94, 0x76);
- Status |= VL53L0X_device_read_strobe(Dev);
- Status |= VL53L0X_RdDWord(Dev, 0x90, &TmpDWord);
-
- DistMeasFixed1104_400_mm |= ((TmpDWord & 0xff000000)
- >> 24);
- }
-
- Status |= VL53L0X_WrByte(Dev, 0x81, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x06);
- Status |= VL53L0X_RdByte(Dev, 0x83, &byte);
- Status |= VL53L0X_WrByte(Dev, 0x83, byte&0xfb);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x01);
-
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x00);
- }
-
- if ((Status == VL53L0X_ERROR_NONE) &&
- (ReadDataFromDeviceDone != 7)) {
- /* Assign to variable if status is ok */
- if (((option & 1) == 1) &&
- ((ReadDataFromDeviceDone & 1) == 0)) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadCount, ReferenceSpadCount);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadType, ReferenceSpadType);
-
- for (i = 0; i < VL53L0X_REF_SPAD_BUFFER_SIZE; i++) {
- Dev->Data.SpadData.RefGoodSpadMap[i] =
- NvmRefGoodSpadMap[i];
- }
- }
-
- if (((option & 2) == 2) &&
- ((ReadDataFromDeviceDone & 2) == 0)) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ModuleId, ModuleId);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- Revision, Revision);
-
- ProductId_tmp = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- ProductId);
- VL53L0X_COPYSTRING(ProductId_tmp, ProductId);
-
- }
-
- if (((option & 4) == 4) &&
- ((ReadDataFromDeviceDone & 4) == 0)) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- PartUIDUpper, PartUIDUpper);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- PartUIDLower, PartUIDLower);
-
- SignalRateMeasFixed400mmFix =
- VL53L0X_FIXPOINT97TOFIXPOINT1616(
- SignalRateMeasFixed1104_400_mm);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- SignalRateMeasFixed400mm,
- SignalRateMeasFixed400mmFix);
-
- OffsetMicroMeters = 0;
- if (DistMeasFixed1104_400_mm != 0) {
- OffsetFixed1104_mm =
- DistMeasFixed1104_400_mm -
- DistMeasTgtFixed1104_mm;
- OffsetMicroMeters = (OffsetFixed1104_mm
- * 1000) >> 4;
- OffsetMicroMeters *= -1;
- }
-
- PALDevDataSet(Dev,
- Part2PartOffsetAdjustmentNVMMicroMeter,
- OffsetMicroMeters);
- }
- byte = (uint8_t)(ReadDataFromDeviceDone|option);
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, ReadDataFromDeviceDone,
- byte);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t byte;
+ uint32_t tmp_dword;
+ uint8_t module_id;
+ uint8_t revision;
+ uint8_t reference_spad_count = 0;
+ uint8_t reference_spad_type = 0;
+ uint32_t part_uid_upper = 0;
+ uint32_t part_uid_lower = 0;
+ uint32_t offset_fixed1104_mm = 0;
+ int16_t offset_micro_meters = 0;
+ uint32_t dist_meas_tgt_fixed1104_mm = 400 << 4;
+ uint32_t dist_meas_fixed1104_400_mm = 0;
+ uint32_t signal_rate_meas_fixed1104_400_mm = 0;
+ char product_id[19];
+ char *product_id_tmp;
+ uint8_t read_data_from_device_done;
+ FixPoint1616_t signal_rate_meas_fixed400_mm_fix = 0;
+ uint8_t nvm_ref_good_spad_map[VL53L0X_REF_SPAD_BUFFER_SIZE];
+ int i;
+
+
+ LOG_FUNCTION_START("");
+
+ read_data_from_device_done = VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ ReadDataFromDeviceDone);
+
+ /* This access is done only once after that a GetDeviceInfo or
+ * datainit is done*/
+ if (read_data_from_device_done != 7) {
+
+ status |= vl53l0x_write_byte(dev, 0x80, 0x01);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x00);
+
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x06);
+ status |= vl53l0x_read_byte(dev, 0x83, &byte);
+ status |= vl53l0x_write_byte(dev, 0x83, byte | 4);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x07);
+ status |= vl53l0x_write_byte(dev, 0x81, 0x01);
+
+ status |= vl53l0x_polling_delay(dev);
+
+ status |= vl53l0x_write_byte(dev, 0x80, 0x01);
+
+ if (((option & 1) == 1) &&
+ ((read_data_from_device_done & 1) == 0)) {
+ status |= vl53l0x_write_byte(dev, 0x94, 0x6b);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ reference_spad_count = (uint8_t)((tmp_dword >> 8) & 0x07f);
+ reference_spad_type = (uint8_t)((tmp_dword >> 15) & 0x01);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x24);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+
+ nvm_ref_good_spad_map[0] = (uint8_t)((tmp_dword >> 24)
+ & 0xff);
+ nvm_ref_good_spad_map[1] = (uint8_t)((tmp_dword >> 16)
+ & 0xff);
+ nvm_ref_good_spad_map[2] = (uint8_t)((tmp_dword >> 8)
+ & 0xff);
+ nvm_ref_good_spad_map[3] = (uint8_t)(tmp_dword & 0xff);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x25);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ nvm_ref_good_spad_map[4] = (uint8_t)((tmp_dword >> 24)
+ & 0xff);
+ nvm_ref_good_spad_map[5] = (uint8_t)((tmp_dword >> 16)
+ & 0xff);
+ }
+
+ if (((option & 2) == 2) &&
+ ((read_data_from_device_done & 2) == 0)) {
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x02);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_byte(dev, 0x90, &module_id);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x7B);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_byte(dev, 0x90, &revision);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x77);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ product_id[0] = (char)((tmp_dword >> 25) & 0x07f);
+ product_id[1] = (char)((tmp_dword >> 18) & 0x07f);
+ product_id[2] = (char)((tmp_dword >> 11) & 0x07f);
+ product_id[3] = (char)((tmp_dword >> 4) & 0x07f);
+
+ byte = (uint8_t)((tmp_dword & 0x00f) << 3);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x78);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ product_id[4] = (char)(byte +
+ ((tmp_dword >> 29) & 0x07f));
+ product_id[5] = (char)((tmp_dword >> 22) & 0x07f);
+ product_id[6] = (char)((tmp_dword >> 15) & 0x07f);
+ product_id[7] = (char)((tmp_dword >> 8) & 0x07f);
+ product_id[8] = (char)((tmp_dword >> 1) & 0x07f);
+
+ byte = (uint8_t)((tmp_dword & 0x001) << 6);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x79);
+
+ status |= vl53l0x_device_read_strobe(dev);
+
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ product_id[9] = (char)(byte +
+ ((tmp_dword >> 26) & 0x07f));
+ product_id[10] = (char)((tmp_dword >> 19) & 0x07f);
+ product_id[11] = (char)((tmp_dword >> 12) & 0x07f);
+ product_id[12] = (char)((tmp_dword >> 5) & 0x07f);
+
+ byte = (uint8_t)((tmp_dword & 0x01f) << 2);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x7A);
+
+ status |= vl53l0x_device_read_strobe(dev);
+
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ product_id[13] = (char)(byte +
+ ((tmp_dword >> 30) & 0x07f));
+ product_id[14] = (char)((tmp_dword >> 23) & 0x07f);
+ product_id[15] = (char)((tmp_dword >> 16) & 0x07f);
+ product_id[16] = (char)((tmp_dword >> 9) & 0x07f);
+ product_id[17] = (char)((tmp_dword >> 2) & 0x07f);
+ product_id[18] = '\0';
+
+ }
+
+ if (((option & 4) == 4) &&
+ ((read_data_from_device_done & 4) == 0)) {
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x7B);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &part_uid_upper);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x7C);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &part_uid_lower);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x73);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ signal_rate_meas_fixed1104_400_mm = (tmp_dword &
+ 0x0000000ff) << 8;
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x74);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ signal_rate_meas_fixed1104_400_mm |= ((tmp_dword &
+ 0xff000000) >> 24);
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x75);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ dist_meas_fixed1104_400_mm = (tmp_dword & 0x0000000ff)
+ << 8;
+
+ status |= vl53l0x_write_byte(dev, 0x94, 0x76);
+ status |= vl53l0x_device_read_strobe(dev);
+ status |= vl53l0x_read_dword(dev, 0x90, &tmp_dword);
+
+ dist_meas_fixed1104_400_mm |= ((tmp_dword & 0xff000000)
+ >> 24);
+ }
+
+ status |= vl53l0x_write_byte(dev, 0x81, 0x00);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x06);
+ status |= vl53l0x_read_byte(dev, 0x83, &byte);
+ status |= vl53l0x_write_byte(dev, 0x83, byte & 0xfb);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x01);
+
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x00);
+ status |= vl53l0x_write_byte(dev, 0x80, 0x00);
+ }
+
+ if ((status == VL53L0X_ERROR_NONE) &&
+ (read_data_from_device_done != 7)) {
+ /* Assign to variable if status is ok */
+ if (((option & 1) == 1) &&
+ ((read_data_from_device_done & 1) == 0)) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadCount, reference_spad_count);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadType, reference_spad_type);
+
+ for (i = 0; i < VL53L0X_REF_SPAD_BUFFER_SIZE; i++) {
+ dev->Data.SpadData.RefGoodSpadMap[i] =
+ nvm_ref_good_spad_map[i];
+ }
+ }
+
+ if (((option & 2) == 2) &&
+ ((read_data_from_device_done & 2) == 0)) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ModuleId, module_id);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ Revision, revision);
+
+ product_id_tmp = VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ ProductId);
+ VL53L0X_COPYSTRING(product_id_tmp, product_id);
+
+ }
+
+ if (((option & 4) == 4) &&
+ ((read_data_from_device_done & 4) == 0)) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ PartUIDUpper, part_uid_upper);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ PartUIDLower, part_uid_lower);
+
+ signal_rate_meas_fixed400_mm_fix =
+ VL53L0X_FIXPOINT97TOFIXPOINT1616(
+ signal_rate_meas_fixed1104_400_mm);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ SignalRateMeasFixed400mm,
+ signal_rate_meas_fixed400_mm_fix);
+
+ offset_micro_meters = 0;
+ if (dist_meas_fixed1104_400_mm != 0) {
+ offset_fixed1104_mm =
+ dist_meas_fixed1104_400_mm -
+ dist_meas_tgt_fixed1104_mm;
+ offset_micro_meters = (offset_fixed1104_mm
+ * 1000) >> 4;
+ offset_micro_meters *= -1;
+ }
+
+ PALDevDataSet(dev,
+ Part2PartOffsetAdjustmentNVMMicroMeter,
+ offset_micro_meters);
+ }
+ byte = (uint8_t)(read_data_from_device_done | option);
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, ReadDataFromDeviceDone,
+ byte);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_offset_calibration_data_micro_meter(VL53L0X_DEV Dev,
- int32_t *pOffsetCalibrationDataMicroMeter)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_get_offset_calibration_data_micro_meter(VL53L0X_DEV dev,
+ int32_t *p_offset_calibration_data_micro_meter)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint16_t RangeOffsetRegister;
- int16_t cMaxOffset = 2047;
- int16_t cOffsetRange = 4096;
-
- /* Note that offset has 10.2 format */
-
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_ALGO_PART_TO_PART_RANGE_OFFSET_MM,
- &RangeOffsetRegister);
-
- if (Status == VL53L0X_ERROR_NONE) {
- RangeOffsetRegister = (RangeOffsetRegister & 0x0fff);
-
- /* Apply 12 bit 2's compliment conversion */
- if (RangeOffsetRegister > cMaxOffset)
- *pOffsetCalibrationDataMicroMeter =
- (int16_t)(RangeOffsetRegister - cOffsetRange)
- * 250;
- else
- *pOffsetCalibrationDataMicroMeter =
- (int16_t)RangeOffsetRegister * 250;
-
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint16_t range_offset_register;
+ int16_t c_max_offset = 2047;
+ int16_t c_offset_range = 4096;
+
+ /* Note that offset has 10.2 format */
+
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_ALGO_PART_TO_PART_RANGE_OFFSET_MM,
+ &range_offset_register);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ range_offset_register = (range_offset_register & 0x0fff);
+
+ /* Apply 12 bit 2's compliment conversion */
+ if (range_offset_register > c_max_offset)
+ *p_offset_calibration_data_micro_meter =
+ (int16_t)(range_offset_register - c_offset_range)
+ * 250;
+ else
+ *p_offset_calibration_data_micro_meter =
+ (int16_t)range_offset_register * 250;
+
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetOffsetCalibrationDataMicroMeter(VL53L0X_DEV Dev,
- int32_t *pOffsetCalibrationDataMicroMeter)
+VL53L0X_Error VL53L0X::vl53l0x_get_offset_calibration_data_micro_meter(VL53L0X_DEV dev,
+ int32_t *p_offset_calibration_data_micro_meter)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_get_offset_calibration_data_micro_meter(Dev,
- pOffsetCalibrationDataMicroMeter);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_get_offset_calibration_data_micro_meter(dev,
+ p_offset_calibration_data_micro_meter);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_set_offset_calibration_data_micro_meter(VL53L0X_DEV Dev,
- int32_t OffsetCalibrationDataMicroMeter)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_set_offset_calibration_data_micro_meter(VL53L0X_DEV dev,
+ int32_t offset_calibration_data_micro_meter)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- int32_t cMaxOffsetMicroMeter = 511000;
- int32_t cMinOffsetMicroMeter = -512000;
- int16_t cOffsetRange = 4096;
- uint32_t encodedOffsetVal;
-
- LOG_FUNCTION_START("");
-
- if (OffsetCalibrationDataMicroMeter > cMaxOffsetMicroMeter)
- OffsetCalibrationDataMicroMeter = cMaxOffsetMicroMeter;
- else if (OffsetCalibrationDataMicroMeter < cMinOffsetMicroMeter)
- OffsetCalibrationDataMicroMeter = cMinOffsetMicroMeter;
-
- /* The offset register is 10.2 format and units are mm
- * therefore conversion is applied by a division of
- * 250.
- */
- if (OffsetCalibrationDataMicroMeter >= 0) {
- encodedOffsetVal =
- OffsetCalibrationDataMicroMeter/250;
- } else {
- encodedOffsetVal =
- cOffsetRange +
- OffsetCalibrationDataMicroMeter/250;
- }
-
- Status = VL53L0X_WrWord(Dev,
- VL53L0X_REG_ALGO_PART_TO_PART_RANGE_OFFSET_MM,
- encodedOffsetVal);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ int32_t c_max_offset_micro_meter = 511000;
+ int32_t c_min_offset_micro_meter = -512000;
+ int16_t c_offset_range = 4096;
+ uint32_t encoded_offset_val;
+
+ LOG_FUNCTION_START("");
+
+ if (offset_calibration_data_micro_meter > c_max_offset_micro_meter)
+ offset_calibration_data_micro_meter = c_max_offset_micro_meter;
+ else if (offset_calibration_data_micro_meter < c_min_offset_micro_meter)
+ offset_calibration_data_micro_meter = c_min_offset_micro_meter;
+
+ /* The offset register is 10.2 format and units are mm
+ * therefore conversion is applied by a division of
+ * 250.
+ */
+ if (offset_calibration_data_micro_meter >= 0) {
+ encoded_offset_val =
+ offset_calibration_data_micro_meter / 250;
+ } else {
+ encoded_offset_val =
+ c_offset_range +
+ offset_calibration_data_micro_meter / 250;
+ }
+
+ status = vl53l0x_write_word(dev,
+ VL53L0X_REG_ALGO_PART_TO_PART_RANGE_OFFSET_MM,
+ encoded_offset_val);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetOffsetCalibrationDataMicroMeter(VL53L0X_DEV Dev,
- int32_t OffsetCalibrationDataMicroMeter)
+VL53L0X_Error VL53L0X::vl53l0x_set_offset_calibration_data_micro_meter(VL53L0X_DEV dev,
+ int32_t offset_calibration_data_micro_meter)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_set_offset_calibration_data_micro_meter(Dev,
- OffsetCalibrationDataMicroMeter);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_set_offset_calibration_data_micro_meter(dev,
+ offset_calibration_data_micro_meter);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_apply_offset_adjustment(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_apply_offset_adjustment(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- int32_t CorrectedOffsetMicroMeters;
- int32_t CurrentOffsetMicroMeters;
-
- /* if we run on this function we can read all the NVM info
- * used by the API */
- Status = VL53L0X_get_info_from_device(Dev, 7);
-
- /* Read back current device offset */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetOffsetCalibrationDataMicroMeter(Dev,
- &CurrentOffsetMicroMeters);
- }
-
- /* Apply Offset Adjustment derived from 400mm measurements */
- if (Status == VL53L0X_ERROR_NONE) {
-
- /* Store initial device offset */
- PALDevDataSet(Dev, Part2PartOffsetNVMMicroMeter,
- CurrentOffsetMicroMeters);
-
- CorrectedOffsetMicroMeters = CurrentOffsetMicroMeters +
- (int32_t)PALDevDataGet(Dev,
- Part2PartOffsetAdjustmentNVMMicroMeter);
-
- Status = VL53L0X_SetOffsetCalibrationDataMicroMeter(Dev,
- CorrectedOffsetMicroMeters);
-
- /* store current, adjusted offset */
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETPARAMETERFIELD(Dev, RangeOffsetMicroMeters,
- CorrectedOffsetMicroMeters);
- }
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ int32_t corrected_offset_micro_meters;
+ int32_t current_offset_micro_meters;
+
+ /* if we run on this function we can read all the NVM info
+ * used by the API */
+ status = vl53l0x_get_info_from_device(dev, 7);
+
+ /* Read back current device offset */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_offset_calibration_data_micro_meter(dev,
+ ¤t_offset_micro_meters);
+ }
+
+ /* Apply Offset Adjustment derived from 400mm measurements */
+ if (status == VL53L0X_ERROR_NONE) {
+
+ /* Store initial device offset */
+ PALDevDataSet(dev, Part2PartOffsetNVMMicroMeter,
+ current_offset_micro_meters);
+
+ corrected_offset_micro_meters = current_offset_micro_meters +
+ (int32_t)PALDevDataGet(dev,
+ Part2PartOffsetAdjustmentNVMMicroMeter);
+
+ status = vl53l0x_set_offset_calibration_data_micro_meter(dev,
+ corrected_offset_micro_meters);
+
+ /* store current, adjusted offset */
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETPARAMETERFIELD(dev, RangeOffsetMicroMeters,
+ corrected_offset_micro_meters);
+ }
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetDeviceMode(VL53L0X_DEV Dev,
- VL53L0X_DeviceModes *pDeviceMode)
+VL53L0X_Error VL53L0X::vl53l0x_get_device_mode(VL53L0X_DEV dev,
+ VL53L0X_DeviceModes *p_device_mode)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- VL53L0X_GETPARAMETERFIELD(Dev, DeviceMode, *pDeviceMode);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ VL53L0X_GETPARAMETERFIELD(dev, DeviceMode, *p_device_mode);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetInterMeasurementPeriodMilliSeconds(VL53L0X_DEV Dev,
- uint32_t *pInterMeasurementPeriodMilliSeconds)
+VL53L0X_Error VL53L0X::vl53l0x_get_inter_measurement_period_milli_seconds(VL53L0X_DEV dev,
+ uint32_t *p_inter_measurement_period_milli_seconds)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint16_t osc_calibrate_val;
- uint32_t IMPeriodMilliSeconds;
-
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdWord(Dev, VL53L0X_REG_OSC_CALIBRATE_VAL,
- &osc_calibrate_val);
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdDWord(Dev,
- VL53L0X_REG_SYSTEM_INTERMEASUREMENT_PERIOD,
- &IMPeriodMilliSeconds);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (osc_calibrate_val != 0) {
- *pInterMeasurementPeriodMilliSeconds =
- IMPeriodMilliSeconds / osc_calibrate_val;
- }
- VL53L0X_SETPARAMETERFIELD(Dev,
- InterMeasurementPeriodMilliSeconds,
- *pInterMeasurementPeriodMilliSeconds);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint16_t osc_calibrate_val;
+ uint32_t im_period_milli_seconds;
+
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_word(dev, VL53L0X_REG_OSC_CALIBRATE_VAL,
+ &osc_calibrate_val);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_dword(dev,
+ VL53L0X_REG_SYSTEM_INTERMEASUREMENT_PERIOD,
+ &im_period_milli_seconds);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (osc_calibrate_val != 0) {
+ *p_inter_measurement_period_milli_seconds =
+ im_period_milli_seconds / osc_calibrate_val;
+ }
+ VL53L0X_SETPARAMETERFIELD(dev,
+ InterMeasurementPeriodMilliSeconds,
+ *p_inter_measurement_period_milli_seconds);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetXTalkCompensationRateMegaCps(VL53L0X_DEV Dev,
- FixPoint1616_t *pXTalkCompensationRateMegaCps)
+VL53L0X_Error VL53L0X::vl53l0x_get_x_talk_compensation_rate_mega_cps(VL53L0X_DEV dev,
+ FixPoint1616_t *p_xtalk_compensation_rate_mega_cps)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint16_t Value;
- FixPoint1616_t TempFix1616;
-
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_CROSSTALK_COMPENSATION_PEAK_RATE_MCPS, (uint16_t *)&Value);
- if (Status == VL53L0X_ERROR_NONE) {
- if (Value == 0) {
- /* the Xtalk is disabled return value from memory */
- VL53L0X_GETPARAMETERFIELD(Dev,
- XTalkCompensationRateMegaCps, TempFix1616);
- *pXTalkCompensationRateMegaCps = TempFix1616;
- VL53L0X_SETPARAMETERFIELD(Dev, XTalkCompensationEnable,
- 0);
- } else {
- TempFix1616 = VL53L0X_FIXPOINT313TOFIXPOINT1616(Value);
- *pXTalkCompensationRateMegaCps = TempFix1616;
- VL53L0X_SETPARAMETERFIELD(Dev,
- XTalkCompensationRateMegaCps, TempFix1616);
- VL53L0X_SETPARAMETERFIELD(Dev, XTalkCompensationEnable,
- 1);
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint16_t value;
+ FixPoint1616_t temp_fix1616;
+
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_CROSSTALK_COMPENSATION_PEAK_RATE_MCPS, (uint16_t *)&value);
+ if (status == VL53L0X_ERROR_NONE) {
+ if (value == 0) {
+ /* the Xtalk is disabled return value from memory */
+ VL53L0X_GETPARAMETERFIELD(dev,
+ XTalkCompensationRateMegaCps, temp_fix1616);
+ *p_xtalk_compensation_rate_mega_cps = temp_fix1616;
+ VL53L0X_SETPARAMETERFIELD(dev, XTalkCompensationEnable,
+ 0);
+ } else {
+ temp_fix1616 = VL53L0X_FIXPOINT313TOFIXPOINT1616(value);
+ *p_xtalk_compensation_rate_mega_cps = temp_fix1616;
+ VL53L0X_SETPARAMETERFIELD(dev,
+ XTalkCompensationRateMegaCps, temp_fix1616);
+ VL53L0X_SETPARAMETERFIELD(dev, XTalkCompensationEnable,
+ 1);
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetLimitCheckValue(VL53L0X_DEV Dev, uint16_t LimitCheckId,
- FixPoint1616_t *pLimitCheckValue)
+VL53L0X_Error VL53L0X::vl53l0x_get_limit_check_value(VL53L0X_DEV dev, uint16_t limit_check_id,
+ FixPoint1616_t *p_limit_check_value)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t EnableZeroValue = 0;
- uint16_t Temp16;
- FixPoint1616_t TempFix1616;
-
- LOG_FUNCTION_START("");
-
- switch (LimitCheckId) {
-
- case VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE:
- /* internal computation: */
- VL53L0X_GETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, TempFix1616);
- EnableZeroValue = 0;
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE:
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
- &Temp16);
- if (Status == VL53L0X_ERROR_NONE)
- TempFix1616 = VL53L0X_FIXPOINT97TOFIXPOINT1616(Temp16);
-
-
- EnableZeroValue = 1;
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP:
- /* internal computation: */
- VL53L0X_GETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP, TempFix1616);
- EnableZeroValue = 0;
- break;
-
- case VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD:
- /* internal computation: */
- VL53L0X_GETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD, TempFix1616);
- EnableZeroValue = 0;
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC:
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE:
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_PRE_RANGE_MIN_COUNT_RATE_RTN_LIMIT,
- &Temp16);
- if (Status == VL53L0X_ERROR_NONE)
- TempFix1616 = VL53L0X_FIXPOINT97TOFIXPOINT1616(Temp16);
-
-
- EnableZeroValue = 0;
- break;
-
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
-
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
-
- if (EnableZeroValue == 1) {
-
- if (TempFix1616 == 0) {
- /* disabled: return value from memory */
- VL53L0X_GETARRAYPARAMETERFIELD(Dev,
- LimitChecksValue, LimitCheckId,
- TempFix1616);
- *pLimitCheckValue = TempFix1616;
- VL53L0X_SETARRAYPARAMETERFIELD(Dev,
- LimitChecksEnable, LimitCheckId, 0);
- } else {
- *pLimitCheckValue = TempFix1616;
- VL53L0X_SETARRAYPARAMETERFIELD(Dev,
- LimitChecksValue, LimitCheckId,
- TempFix1616);
- VL53L0X_SETARRAYPARAMETERFIELD(Dev,
- LimitChecksEnable, LimitCheckId, 1);
- }
- } else {
- *pLimitCheckValue = TempFix1616;
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t enable_zero_value = 0;
+ uint16_t temp16;
+ FixPoint1616_t temp_fix1616;
+
+ LOG_FUNCTION_START("");
+
+ switch (limit_check_id) {
+
+ case VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE:
+ /* internal computation: */
+ VL53L0X_GETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, temp_fix1616);
+ enable_zero_value = 0;
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE:
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
+ &temp16);
+ if (status == VL53L0X_ERROR_NONE)
+ temp_fix1616 = VL53L0X_FIXPOINT97TOFIXPOINT1616(temp16);
+
+
+ enable_zero_value = 1;
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP:
+ /* internal computation: */
+ VL53L0X_GETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP, temp_fix1616);
+ enable_zero_value = 0;
+ break;
+
+ case VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD:
+ /* internal computation: */
+ VL53L0X_GETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD, temp_fix1616);
+ enable_zero_value = 0;
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC:
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE:
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_PRE_RANGE_MIN_COUNT_RATE_RTN_LIMIT,
+ &temp16);
+ if (status == VL53L0X_ERROR_NONE)
+ temp_fix1616 = VL53L0X_FIXPOINT97TOFIXPOINT1616(temp16);
+
+
+ enable_zero_value = 0;
+ break;
+
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+
+ if (enable_zero_value == 1) {
+
+ if (temp_fix1616 == 0) {
+ /* disabled: return value from memory */
+ VL53L0X_GETARRAYPARAMETERFIELD(dev,
+ LimitChecksValue, limit_check_id,
+ temp_fix1616);
+ *p_limit_check_value = temp_fix1616;
+ VL53L0X_SETARRAYPARAMETERFIELD(dev,
+ LimitChecksEnable, limit_check_id, 0);
+ } else {
+ *p_limit_check_value = temp_fix1616;
+ VL53L0X_SETARRAYPARAMETERFIELD(dev,
+ LimitChecksValue, limit_check_id,
+ temp_fix1616);
+ VL53L0X_SETARRAYPARAMETERFIELD(dev,
+ LimitChecksEnable, limit_check_id, 1);
+ }
+ } else {
+ *p_limit_check_value = temp_fix1616;
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetLimitCheckEnable(VL53L0X_DEV Dev, uint16_t LimitCheckId,
- uint8_t *pLimitCheckEnable)
+VL53L0X_Error VL53L0X::vl53l0x_get_limit_check_enable(VL53L0X_DEV dev, uint16_t limit_check_id,
+ uint8_t *p_limit_check_enable)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t Temp8;
-
- LOG_FUNCTION_START("");
-
- if (LimitCheckId >= VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS) {
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- *pLimitCheckEnable = 0;
- } else {
- VL53L0X_GETARRAYPARAMETERFIELD(Dev, LimitChecksEnable,
- LimitCheckId, Temp8);
- *pLimitCheckEnable = Temp8;
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t temp8;
+
+ LOG_FUNCTION_START("");
+
+ if (limit_check_id >= VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS) {
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ *p_limit_check_enable = 0;
+ } else {
+ VL53L0X_GETARRAYPARAMETERFIELD(dev, LimitChecksEnable,
+ limit_check_id, temp8);
+ *p_limit_check_enable = temp8;
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetWrapAroundCheckEnable(VL53L0X_DEV Dev,
- uint8_t *pWrapAroundCheckEnable)
+VL53L0X_Error VL53L0X::vl53l0x_get_wrap_around_check_enable(VL53L0X_DEV dev,
+ uint8_t *p_wrap_around_check_enable)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t data;
-
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, &data);
- if (Status == VL53L0X_ERROR_NONE) {
- PALDevDataSet(Dev, SequenceConfig, data);
- if (data & (0x01 << 7))
- *pWrapAroundCheckEnable = 0x01;
- else
- *pWrapAroundCheckEnable = 0x00;
- }
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETPARAMETERFIELD(Dev, WrapAroundCheckEnable,
- *pWrapAroundCheckEnable);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t data;
+
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, &data);
+ if (status == VL53L0X_ERROR_NONE) {
+ PALDevDataSet(dev, SequenceConfig, data);
+ if (data & (0x01 << 7))
+ *p_wrap_around_check_enable = 0x01;
+ else
+ *p_wrap_around_check_enable = 0x00;
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETPARAMETERFIELD(dev, WrapAroundCheckEnable,
+ *p_wrap_around_check_enable);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::sequence_step_enabled(VL53L0X_DEV Dev,
- VL53L0X_SequenceStepId SequenceStepId, uint8_t SequenceConfig,
- uint8_t *pSequenceStepEnabled)
+VL53L0X_Error VL53L0X::sequence_step_enabled(VL53L0X_DEV dev,
+ VL53L0X_SequenceStepId sequence_step_id, uint8_t sequence_config,
+ uint8_t *p_sequence_step_enabled)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- *pSequenceStepEnabled = 0;
- LOG_FUNCTION_START("");
-
- switch (SequenceStepId) {
- case VL53L0X_SEQUENCESTEP_TCC:
- *pSequenceStepEnabled = (SequenceConfig & 0x10) >> 4;
- break;
- case VL53L0X_SEQUENCESTEP_DSS:
- *pSequenceStepEnabled = (SequenceConfig & 0x08) >> 3;
- break;
- case VL53L0X_SEQUENCESTEP_MSRC:
- *pSequenceStepEnabled = (SequenceConfig & 0x04) >> 2;
- break;
- case VL53L0X_SEQUENCESTEP_PRE_RANGE:
- *pSequenceStepEnabled = (SequenceConfig & 0x40) >> 6;
- break;
- case VL53L0X_SEQUENCESTEP_FINAL_RANGE:
- *pSequenceStepEnabled = (SequenceConfig & 0x80) >> 7;
- break;
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error Status = VL53L0X_ERROR_NONE;
+ *p_sequence_step_enabled = 0;
+ LOG_FUNCTION_START("");
+
+ switch (sequence_step_id) {
+ case VL53L0X_SEQUENCESTEP_TCC:
+ *p_sequence_step_enabled = (sequence_config & 0x10) >> 4;
+ break;
+ case VL53L0X_SEQUENCESTEP_DSS:
+ *p_sequence_step_enabled = (sequence_config & 0x08) >> 3;
+ break;
+ case VL53L0X_SEQUENCESTEP_MSRC:
+ *p_sequence_step_enabled = (sequence_config & 0x04) >> 2;
+ break;
+ case VL53L0X_SEQUENCESTEP_PRE_RANGE:
+ *p_sequence_step_enabled = (sequence_config & 0x40) >> 6;
+ break;
+ case VL53L0X_SEQUENCESTEP_FINAL_RANGE:
+ *p_sequence_step_enabled = (sequence_config & 0x80) >> 7;
+ break;
+ default:
+ Status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+
+ LOG_FUNCTION_END(status);
+ return Status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetSequenceStepEnables(VL53L0X_DEV Dev,
- VL53L0X_SchedulerSequenceSteps_t *pSchedulerSequenceSteps)
+VL53L0X_Error VL53L0X::vl53l0x_get_sequence_step_enables(VL53L0X_DEV dev,
+ VL53L0X_SchedulerSequenceSteps_t *p_scheduler_sequence_steps)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t SequenceConfig = 0;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- &SequenceConfig);
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = sequence_step_enabled(Dev,
- VL53L0X_SEQUENCESTEP_TCC, SequenceConfig,
- &pSchedulerSequenceSteps->TccOn);
- }
- if (Status == VL53L0X_ERROR_NONE) {
- Status = sequence_step_enabled(Dev,
- VL53L0X_SEQUENCESTEP_DSS, SequenceConfig,
- &pSchedulerSequenceSteps->DssOn);
- }
- if (Status == VL53L0X_ERROR_NONE) {
- Status = sequence_step_enabled(Dev,
- VL53L0X_SEQUENCESTEP_MSRC, SequenceConfig,
- &pSchedulerSequenceSteps->MsrcOn);
- }
- if (Status == VL53L0X_ERROR_NONE) {
- Status = sequence_step_enabled(Dev,
- VL53L0X_SEQUENCESTEP_PRE_RANGE, SequenceConfig,
- &pSchedulerSequenceSteps->PreRangeOn);
- }
- if (Status == VL53L0X_ERROR_NONE) {
- Status = sequence_step_enabled(Dev,
- VL53L0X_SEQUENCESTEP_FINAL_RANGE, SequenceConfig,
- &pSchedulerSequenceSteps->FinalRangeOn);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t sequence_config = 0;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ &sequence_config);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = sequence_step_enabled(dev,
+ VL53L0X_SEQUENCESTEP_TCC, sequence_config,
+ &p_scheduler_sequence_steps->TccOn);
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ status = sequence_step_enabled(dev,
+ VL53L0X_SEQUENCESTEP_DSS, sequence_config,
+ &p_scheduler_sequence_steps->DssOn);
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ status = sequence_step_enabled(dev,
+ VL53L0X_SEQUENCESTEP_MSRC, sequence_config,
+ &p_scheduler_sequence_steps->MsrcOn);
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ status = sequence_step_enabled(dev,
+ VL53L0X_SEQUENCESTEP_PRE_RANGE, sequence_config,
+ &p_scheduler_sequence_steps->PreRangeOn);
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ status = sequence_step_enabled(dev,
+ VL53L0X_SEQUENCESTEP_FINAL_RANGE, sequence_config,
+ &p_scheduler_sequence_steps->FinalRangeOn);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-uint8_t VL53L0X::VL53L0X_decode_vcsel_period(uint8_t vcsel_period_reg)
+uint8_t VL53L0X::vl53l0x_decode_vcsel_period(uint8_t vcsel_period_reg)
{
- /*!
- * Converts the encoded VCSEL period register value into the real
- * period in PLL clocks
- */
-
- uint8_t vcsel_period_pclks = 0;
-
- vcsel_period_pclks = (vcsel_period_reg + 1) << 1;
-
- return vcsel_period_pclks;
+ /*!
+ * Converts the encoded VCSEL period register value into the real
+ * period in PLL clocks
+ */
+
+ uint8_t vcsel_period_pclks = 0;
+
+ vcsel_period_pclks = (vcsel_period_reg + 1) << 1;
+
+ return vcsel_period_pclks;
}
-uint8_t VL53L0X::VL53L0X_encode_vcsel_period(uint8_t vcsel_period_pclks)
+uint8_t VL53L0X::lv53l0x_encode_vcsel_period(uint8_t vcsel_period_pclks)
{
- /*!
- * Converts the encoded VCSEL period register value into the real period
- * in PLL clocks
- */
-
- uint8_t vcsel_period_reg = 0;
-
- vcsel_period_reg = (vcsel_period_pclks >> 1) - 1;
-
- return vcsel_period_reg;
+ /*!
+ * Converts the encoded VCSEL period register value into the real period
+ * in PLL clocks
+ */
+
+ uint8_t vcsel_period_reg = 0;
+
+ vcsel_period_reg = (vcsel_period_pclks >> 1) - 1;
+
+ return vcsel_period_reg;
}
-VL53L0X_Error VL53L0X::VL53L0X_set_vcsel_pulse_period(VL53L0X_DEV Dev,
- VL53L0X_VcselPeriod VcselPeriodType, uint8_t VCSELPulsePeriodPCLK)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_set_vcsel_pulse_period(VL53L0X_DEV dev,
+ VL53L0X_VcselPeriod vcsel_period_type, uint8_t vcsel_pulse_period_pclk)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t vcsel_period_reg;
- uint8_t MinPreVcselPeriodPCLK = 12;
- uint8_t MaxPreVcselPeriodPCLK = 18;
- uint8_t MinFinalVcselPeriodPCLK = 8;
- uint8_t MaxFinalVcselPeriodPCLK = 14;
- uint32_t MeasurementTimingBudgetMicroSeconds;
- uint32_t FinalRangeTimeoutMicroSeconds;
- uint32_t PreRangeTimeoutMicroSeconds;
- uint32_t MsrcTimeoutMicroSeconds;
- uint8_t PhaseCalInt = 0;
-
- /* Check if valid clock period requested */
-
- if ((VCSELPulsePeriodPCLK % 2) != 0) {
- /* Value must be an even number */
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- } else if (VcselPeriodType == VL53L0X_VCSEL_PERIOD_PRE_RANGE &&
- (VCSELPulsePeriodPCLK < MinPreVcselPeriodPCLK ||
- VCSELPulsePeriodPCLK > MaxPreVcselPeriodPCLK)) {
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- } else if (VcselPeriodType == VL53L0X_VCSEL_PERIOD_FINAL_RANGE &&
- (VCSELPulsePeriodPCLK < MinFinalVcselPeriodPCLK ||
- VCSELPulsePeriodPCLK > MaxFinalVcselPeriodPCLK)) {
-
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
-
- /* Apply specific settings for the requested clock period */
-
- if (Status != VL53L0X_ERROR_NONE)
- return Status;
-
-
- if (VcselPeriodType == VL53L0X_VCSEL_PERIOD_PRE_RANGE) {
-
- /* Set phase check limits */
- if (VCSELPulsePeriodPCLK == 12) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x18);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
- } else if (VCSELPulsePeriodPCLK == 14) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x30);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
- } else if (VCSELPulsePeriodPCLK == 16) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x40);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
- } else if (VCSELPulsePeriodPCLK == 18) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x50);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
- }
- } else if (VcselPeriodType == VL53L0X_VCSEL_PERIOD_FINAL_RANGE) {
-
- if (VCSELPulsePeriodPCLK == 8) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x10);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
-
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x02);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x0C);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x01);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_LIM,
- 0x30);
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x00);
- } else if (VCSELPulsePeriodPCLK == 10) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x28);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
-
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x03);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x09);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x01);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_LIM,
- 0x20);
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x00);
- } else if (VCSELPulsePeriodPCLK == 12) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x38);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
-
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x03);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x08);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x01);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_LIM,
- 0x20);
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x00);
- } else if (VCSELPulsePeriodPCLK == 14) {
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
- 0x048);
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
- 0x08);
-
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x03);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x07);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x01);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_ALGO_PHASECAL_LIM,
- 0x20);
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x00);
- }
- }
-
-
- /* Re-calculate and apply timeouts, in macro periods */
-
- if (Status == VL53L0X_ERROR_NONE) {
- vcsel_period_reg = VL53L0X_encode_vcsel_period((uint8_t)
- VCSELPulsePeriodPCLK);
-
- /* When the VCSEL period for the pre or final range is changed,
- * the corresponding timeout must be read from the device using
- * the current VCSEL period, then the new VCSEL period can be
- * applied. The timeout then must be written back to the device
- * using the new VCSEL period.
- *
- * For the MSRC timeout, the same applies - this timeout being
- * dependant on the pre-range vcsel period.
- */
- switch (VcselPeriodType) {
- case VL53L0X_VCSEL_PERIOD_PRE_RANGE:
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_PRE_RANGE,
- &PreRangeTimeoutMicroSeconds);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_MSRC,
- &MsrcTimeoutMicroSeconds);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VCSEL_PERIOD,
- vcsel_period_reg);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = set_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_PRE_RANGE,
- PreRangeTimeoutMicroSeconds);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = set_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_MSRC,
- MsrcTimeoutMicroSeconds);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- PreRangeVcselPulsePeriod,
- VCSELPulsePeriodPCLK);
- break;
- case VL53L0X_VCSEL_PERIOD_FINAL_RANGE:
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_FINAL_RANGE,
- &FinalRangeTimeoutMicroSeconds);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VCSEL_PERIOD,
- vcsel_period_reg);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = set_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_FINAL_RANGE,
- FinalRangeTimeoutMicroSeconds);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- FinalRangeVcselPulsePeriod,
- VCSELPulsePeriodPCLK);
- break;
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
-
- /* Finally, the timing budget must be re-applied */
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_GETPARAMETERFIELD(Dev,
- MeasurementTimingBudgetMicroSeconds,
- MeasurementTimingBudgetMicroSeconds);
-
- Status = VL53L0X_SetMeasurementTimingBudgetMicroSeconds(Dev,
- MeasurementTimingBudgetMicroSeconds);
- }
-
- /* Perform the phase calibration. This is needed after changing on
- * vcsel period.
- * get_data_enable = 0, restore_config = 1 */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_perform_phase_calibration(
- Dev, &PhaseCalInt, 0, 1);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t vcsel_period_reg;
+ uint8_t min_pre_vcsel_period_pclk = 12;
+ uint8_t max_pre_vcsel_period_pclk = 18;
+ uint8_t min_final_vcsel_period_pclk = 8;
+ uint8_t max_final_vcsel_period_pclk = 14;
+ uint32_t measurement_timing_budget_micro_seconds;
+ uint32_t final_range_timeout_micro_seconds;
+ uint32_t pre_range_timeout_micro_seconds;
+ uint32_t msrc_timeout_micro_seconds;
+ uint8_t phase_cal_int = 0;
+
+ /* Check if valid clock period requested */
+
+ if ((vcsel_pulse_period_pclk % 2) != 0) {
+ /* Value must be an even number */
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ } else if (vcsel_period_type == VL53L0X_VCSEL_PERIOD_PRE_RANGE &&
+ (vcsel_pulse_period_pclk < min_pre_vcsel_period_pclk ||
+ vcsel_pulse_period_pclk > max_pre_vcsel_period_pclk)) {
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ } else if (vcsel_period_type == VL53L0X_VCSEL_PERIOD_FINAL_RANGE &&
+ (vcsel_pulse_period_pclk < min_final_vcsel_period_pclk ||
+ vcsel_pulse_period_pclk > max_final_vcsel_period_pclk)) {
+
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+
+ /* Apply specific settings for the requested clock period */
+
+ if (status != VL53L0X_ERROR_NONE)
+ return status;
+
+
+ if (vcsel_period_type == VL53L0X_VCSEL_PERIOD_PRE_RANGE) {
+
+ /* Set phase check limits */
+ if (vcsel_pulse_period_pclk == 12) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x18);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+ } else if (vcsel_pulse_period_pclk == 14) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x30);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+ } else if (vcsel_pulse_period_pclk == 16) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x40);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+ } else if (vcsel_pulse_period_pclk == 18) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x50);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+ }
+ } else if (vcsel_period_type == VL53L0X_VCSEL_PERIOD_FINAL_RANGE) {
+
+ if (vcsel_pulse_period_pclk == 8) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x10);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x02);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x0C);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x01);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_LIM,
+ 0x30);
+ status |= vl53l0x_write_byte(dev, 0xff, 0x00);
+ } else if (vcsel_pulse_period_pclk == 10) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x28);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x03);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x09);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x01);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_LIM,
+ 0x20);
+ status |= vl53l0x_write_byte(dev, 0xff, 0x00);
+ } else if (vcsel_pulse_period_pclk == 12) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x38);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x03);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x08);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x01);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_LIM,
+ 0x20);
+ status |= vl53l0x_write_byte(dev, 0xff, 0x00);
+ } else if (vcsel_pulse_period_pclk == 14) {
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_HIGH,
+ 0x048);
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VALID_PHASE_LOW,
+ 0x08);
+
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_VCSEL_WIDTH, 0x03);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_CONFIG_TIMEOUT, 0x07);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x01);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_ALGO_PHASECAL_LIM,
+ 0x20);
+ status |= vl53l0x_write_byte(dev, 0xff, 0x00);
+ }
+ }
+
+
+ /* Re-calculate and apply timeouts, in macro periods */
+
+ if (status == VL53L0X_ERROR_NONE) {
+ vcsel_period_reg = lv53l0x_encode_vcsel_period((uint8_t)
+ vcsel_pulse_period_pclk);
+
+ /* When the VCSEL period for the pre or final range is changed,
+ * the corresponding timeout must be read from the device using
+ * the current VCSEL period, then the new VCSEL period can be
+ * applied. The timeout then must be written back to the device
+ * using the new VCSEL period.
+ *
+ * For the MSRC timeout, the same applies - this timeout being
+ * dependant on the pre-range vcsel period.
+ */
+ switch (vcsel_period_type) {
+ case VL53L0X_VCSEL_PERIOD_PRE_RANGE:
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_PRE_RANGE,
+ &pre_range_timeout_micro_seconds);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_MSRC,
+ &msrc_timeout_micro_seconds);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VCSEL_PERIOD,
+ vcsel_period_reg);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = set_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_PRE_RANGE,
+ pre_range_timeout_micro_seconds);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = set_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_MSRC,
+ msrc_timeout_micro_seconds);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ PreRangeVcselPulsePeriod,
+ vcsel_pulse_period_pclk);
+ break;
+ case VL53L0X_VCSEL_PERIOD_FINAL_RANGE:
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_FINAL_RANGE,
+ &final_range_timeout_micro_seconds);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VCSEL_PERIOD,
+ vcsel_period_reg);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = set_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_FINAL_RANGE,
+ final_range_timeout_micro_seconds);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ FinalRangeVcselPulsePeriod,
+ vcsel_pulse_period_pclk);
+ break;
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+
+ /* Finally, the timing budget must be re-applied */
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_GETPARAMETERFIELD(dev,
+ MeasurementTimingBudgetMicroSeconds,
+ measurement_timing_budget_micro_seconds);
+
+ status = vl53l0x_set_measurement_timing_budget_micro_seconds(dev,
+ measurement_timing_budget_micro_seconds);
+ }
+
+ /* Perform the phase calibration. This is needed after changing on
+ * vcsel period.
+ * get_data_enable = 0, restore_config = 1 */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_phase_calibration(
+ dev, &phase_cal_int, 0, 1);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetVcselPulsePeriod(VL53L0X_DEV Dev,
- VL53L0X_VcselPeriod VcselPeriodType, uint8_t VCSELPulsePeriodPCLK)
+VL53L0X_Error VL53L0X::vl53l0x_set_vcsel_pulse_period(VL53L0X_DEV dev,
+ VL53L0X_VcselPeriod vcsel_period_type, uint8_t vcsel_pulse_period)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_set_vcsel_pulse_period(Dev, VcselPeriodType,
- VCSELPulsePeriodPCLK);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_set_vcsel_pulse_period(dev, vcsel_period_type,
+ vcsel_pulse_period);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_vcsel_pulse_period(VL53L0X_DEV Dev,
- VL53L0X_VcselPeriod VcselPeriodType, uint8_t *pVCSELPulsePeriodPCLK)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_get_vcsel_pulse_period(VL53L0X_DEV dev,
+ VL53L0X_VcselPeriod vcsel_period_type, uint8_t *p_vcsel_pulse_period_pclk)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t vcsel_period_reg;
-
- switch (VcselPeriodType) {
- case VL53L0X_VCSEL_PERIOD_PRE_RANGE:
- Status = VL53L0X_RdByte(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_VCSEL_PERIOD,
- &vcsel_period_reg);
- break;
- case VL53L0X_VCSEL_PERIOD_FINAL_RANGE:
- Status = VL53L0X_RdByte(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_VCSEL_PERIOD,
- &vcsel_period_reg);
- break;
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
-
- if (Status == VL53L0X_ERROR_NONE)
- *pVCSELPulsePeriodPCLK =
- VL53L0X_decode_vcsel_period(vcsel_period_reg);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t vcsel_period_reg;
+
+ switch (vcsel_period_type) {
+ case VL53L0X_VCSEL_PERIOD_PRE_RANGE:
+ status = vl53l0x_read_byte(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_VCSEL_PERIOD,
+ &vcsel_period_reg);
+ break;
+ case VL53L0X_VCSEL_PERIOD_FINAL_RANGE:
+ status = vl53l0x_read_byte(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_VCSEL_PERIOD,
+ &vcsel_period_reg);
+ break;
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+
+ if (status == VL53L0X_ERROR_NONE)
+ *p_vcsel_pulse_period_pclk =
+ vl53l0x_decode_vcsel_period(vcsel_period_reg);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetVcselPulsePeriod(VL53L0X_DEV Dev,
- VL53L0X_VcselPeriod VcselPeriodType, uint8_t *pVCSELPulsePeriodPCLK)
+VL53L0X_Error VL53L0X::vl53l0x_get_vcsel_pulse_period(VL53L0X_DEV dev,
+ VL53L0X_VcselPeriod vcsel_period_type, uint8_t *p_vcsel_pulse_period_pclk)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_get_vcsel_pulse_period(Dev, VcselPeriodType,
- pVCSELPulsePeriodPCLK);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_get_vcsel_pulse_period(dev, vcsel_period_type,
+ p_vcsel_pulse_period_pclk);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-uint32_t VL53L0X::VL53L0X_decode_timeout(uint16_t encoded_timeout)
+uint32_t VL53L0X::vl53l0x_decode_timeout(uint16_t encoded_timeout)
{
- /*!
- * Decode 16-bit timeout register value - format (LSByte * 2^MSByte) + 1
- */
-
- uint32_t timeout_macro_clks = 0;
-
- timeout_macro_clks = ((uint32_t) (encoded_timeout & 0x00FF)
- << (uint32_t) ((encoded_timeout & 0xFF00) >> 8)) + 1;
-
- return timeout_macro_clks;
+ /*!
+ * Decode 16-bit timeout register value - format (LSByte * 2^MSByte) + 1
+ */
+
+ uint32_t timeout_macro_clks = 0;
+
+ timeout_macro_clks = ((uint32_t)(encoded_timeout & 0x00FF)
+ << (uint32_t)((encoded_timeout & 0xFF00) >> 8)) + 1;
+
+ return timeout_macro_clks;
}
-uint32_t VL53L0X::VL53L0X_calc_macro_period_ps(VL53L0X_DEV Dev, uint8_t vcsel_period_pclks)
+uint32_t VL53L0X::vl53l0x_calc_macro_period_ps(VL53L0X_DEV dev, uint8_t vcsel_period_pclks)
{
- uint64_t PLL_period_ps;
- uint32_t macro_period_vclks;
- uint32_t macro_period_ps;
-
- LOG_FUNCTION_START("");
-
- /* The above calculation will produce rounding errors,
- therefore set fixed value
- */
- PLL_period_ps = 1655;
-
- macro_period_vclks = 2304;
- macro_period_ps = (uint32_t)(macro_period_vclks
- * vcsel_period_pclks * PLL_period_ps);
-
- LOG_FUNCTION_END("");
- return macro_period_ps;
+ uint64_t pll_period_ps;
+ uint32_t macro_period_vclks;
+ uint32_t macro_period_ps;
+
+ LOG_FUNCTION_START("");
+
+ /* The above calculation will produce rounding errors,
+ therefore set fixed value
+ */
+ pll_period_ps = 1655;
+
+ macro_period_vclks = 2304;
+ macro_period_ps = (uint32_t)(macro_period_vclks
+ * vcsel_period_pclks * pll_period_ps);
+
+ LOG_FUNCTION_END("");
+ return macro_period_ps;
}
/* To convert register value into us */
-uint32_t VL53L0X::VL53L0X_calc_timeout_us(VL53L0X_DEV Dev,
- uint16_t timeout_period_mclks,
- uint8_t vcsel_period_pclks)
+uint32_t VL53L0X::vl53l0x_calc_timeout_us(VL53L0X_DEV dev,
+ uint16_t timeout_period_mclks,
+ uint8_t vcsel_period_pclks)
{
- uint32_t macro_period_ps;
- uint32_t macro_period_ns;
- uint32_t actual_timeout_period_us = 0;
-
- macro_period_ps = VL53L0X_calc_macro_period_ps(Dev, vcsel_period_pclks);
- macro_period_ns = (macro_period_ps + 500) / 1000;
-
- actual_timeout_period_us =
- ((timeout_period_mclks * macro_period_ns) + 500) / 1000;
-
- return actual_timeout_period_us;
+ uint32_t macro_period_ps;
+ uint32_t macro_period_ns;
+ uint32_t actual_timeout_period_us = 0;
+
+ macro_period_ps = vl53l0x_calc_macro_period_ps(dev, vcsel_period_pclks);
+ macro_period_ns = (macro_period_ps + 500) / 1000;
+
+ actual_timeout_period_us =
+ ((timeout_period_mclks * macro_period_ns) + 500) / 1000;
+
+ return actual_timeout_period_us;
}
-VL53L0X_Error VL53L0X::get_sequence_step_timeout(VL53L0X_DEV Dev,
- VL53L0X_SequenceStepId SequenceStepId,
- uint32_t *pTimeOutMicroSecs)
+VL53L0X_Error VL53L0X::get_sequence_step_timeout(VL53L0X_DEV dev,
+ VL53L0X_SequenceStepId sequence_step_id,
+ uint32_t *p_time_out_micro_secs)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t CurrentVCSELPulsePeriodPClk;
- uint8_t EncodedTimeOutByte = 0;
- uint32_t TimeoutMicroSeconds = 0;
- uint16_t PreRangeEncodedTimeOut = 0;
- uint16_t MsrcTimeOutMClks;
- uint16_t PreRangeTimeOutMClks;
- uint16_t FinalRangeTimeOutMClks = 0;
- uint16_t FinalRangeEncodedTimeOut;
- VL53L0X_SchedulerSequenceSteps_t SchedulerSequenceSteps;
-
- if ((SequenceStepId == VL53L0X_SEQUENCESTEP_TCC) ||
- (SequenceStepId == VL53L0X_SEQUENCESTEP_DSS) ||
- (SequenceStepId == VL53L0X_SEQUENCESTEP_MSRC)) {
-
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdByte(Dev,
- VL53L0X_REG_MSRC_CONFIG_TIMEOUT_MACROP,
- &EncodedTimeOutByte);
- }
- MsrcTimeOutMClks = VL53L0X_decode_timeout(EncodedTimeOutByte);
-
- TimeoutMicroSeconds = VL53L0X_calc_timeout_us(Dev,
- MsrcTimeOutMClks,
- CurrentVCSELPulsePeriodPClk);
- } else if (SequenceStepId == VL53L0X_SEQUENCESTEP_PRE_RANGE) {
- /* Retrieve PRE-RANGE VCSEL Period */
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
-
- /* Retrieve PRE-RANGE Timeout in Macro periods (MCLKS) */
- if (Status == VL53L0X_ERROR_NONE) {
-
- /* Retrieve PRE-RANGE VCSEL Period */
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI,
- &PreRangeEncodedTimeOut);
- }
-
- PreRangeTimeOutMClks = VL53L0X_decode_timeout(
- PreRangeEncodedTimeOut);
-
- TimeoutMicroSeconds = VL53L0X_calc_timeout_us(Dev,
- PreRangeTimeOutMClks,
- CurrentVCSELPulsePeriodPClk);
- }
- } else if (SequenceStepId == VL53L0X_SEQUENCESTEP_FINAL_RANGE) {
-
- VL53L0X_GetSequenceStepEnables(Dev, &SchedulerSequenceSteps);
- PreRangeTimeOutMClks = 0;
-
- if (SchedulerSequenceSteps.PreRangeOn) {
- /* Retrieve PRE-RANGE VCSEL Period */
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
-
- /* Retrieve PRE-RANGE Timeout in Macro periods
- * (MCLKS) */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI,
- &PreRangeEncodedTimeOut);
- PreRangeTimeOutMClks = VL53L0X_decode_timeout(
- PreRangeEncodedTimeOut);
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* Retrieve FINAL-RANGE VCSEL Period */
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_FINAL_RANGE,
- &CurrentVCSELPulsePeriodPClk);
- }
-
- /* Retrieve FINAL-RANGE Timeout in Macro periods (MCLKS) */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_TIMEOUT_MACROP_HI,
- &FinalRangeEncodedTimeOut);
- FinalRangeTimeOutMClks = VL53L0X_decode_timeout(
- FinalRangeEncodedTimeOut);
- }
-
- FinalRangeTimeOutMClks -= PreRangeTimeOutMClks;
- TimeoutMicroSeconds = VL53L0X_calc_timeout_us(Dev,
- FinalRangeTimeOutMClks,
- CurrentVCSELPulsePeriodPClk);
- }
-
- *pTimeOutMicroSecs = TimeoutMicroSeconds;
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t current_vcsel_pulse_period_p_clk;
+ uint8_t encoded_time_out_byte = 0;
+ uint32_t timeout_micro_seconds = 0;
+ uint16_t pre_range_encoded_time_out = 0;
+ uint16_t msrc_time_out_m_clks;
+ uint16_t pre_range_time_out_m_clks;
+ uint16_t final_range_time_out_m_clks = 0;
+ uint16_t final_range_encoded_time_out;
+ VL53L0X_SchedulerSequenceSteps_t scheduler_sequence_steps;
+
+ if ((sequence_step_id == VL53L0X_SEQUENCESTEP_TCC) ||
+ (sequence_step_id == VL53L0X_SEQUENCESTEP_DSS) ||
+ (sequence_step_id == VL53L0X_SEQUENCESTEP_MSRC)) {
+
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_byte(dev,
+ VL53L0X_REG_MSRC_CONFIG_TIMEOUT_MACROP,
+ &encoded_time_out_byte);
+ }
+ msrc_time_out_m_clks = vl53l0x_decode_timeout(encoded_time_out_byte);
+
+ timeout_micro_seconds = vl53l0x_calc_timeout_us(dev,
+ msrc_time_out_m_clks,
+ current_vcsel_pulse_period_p_clk);
+ } else if (sequence_step_id == VL53L0X_SEQUENCESTEP_PRE_RANGE) {
+ /* Retrieve PRE-RANGE VCSEL Period */
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+
+ /* Retrieve PRE-RANGE Timeout in Macro periods (MCLKS) */
+ if (status == VL53L0X_ERROR_NONE) {
+
+ /* Retrieve PRE-RANGE VCSEL Period */
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI,
+ &pre_range_encoded_time_out);
+ }
+
+ pre_range_time_out_m_clks = vl53l0x_decode_timeout(
+ pre_range_encoded_time_out);
+
+ timeout_micro_seconds = vl53l0x_calc_timeout_us(dev,
+ pre_range_time_out_m_clks,
+ current_vcsel_pulse_period_p_clk);
+ }
+ } else if (sequence_step_id == VL53L0X_SEQUENCESTEP_FINAL_RANGE) {
+
+ vl53l0x_get_sequence_step_enables(dev, &scheduler_sequence_steps);
+ pre_range_time_out_m_clks = 0;
+
+ if (scheduler_sequence_steps.PreRangeOn) {
+ /* Retrieve PRE-RANGE VCSEL Period */
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+
+ /* Retrieve PRE-RANGE Timeout in Macro periods
+ * (MCLKS) */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI,
+ &pre_range_encoded_time_out);
+ pre_range_time_out_m_clks = vl53l0x_decode_timeout(
+ pre_range_encoded_time_out);
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Retrieve FINAL-RANGE VCSEL Period */
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_FINAL_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+ }
+
+ /* Retrieve FINAL-RANGE Timeout in Macro periods (MCLKS) */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_TIMEOUT_MACROP_HI,
+ &final_range_encoded_time_out);
+ final_range_time_out_m_clks = vl53l0x_decode_timeout(
+ final_range_encoded_time_out);
+ }
+
+ final_range_time_out_m_clks -= pre_range_time_out_m_clks;
+ timeout_micro_seconds = vl53l0x_calc_timeout_us(dev,
+ final_range_time_out_m_clks,
+ current_vcsel_pulse_period_p_clk);
+ }
+
+ *p_time_out_micro_secs = timeout_micro_seconds;
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_measurement_timing_budget_micro_seconds(VL53L0X_DEV Dev,
- uint32_t *pMeasurementTimingBudgetMicroSeconds)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_get_measurement_timing_budget_micro_seconds(VL53L0X_DEV dev,
+ uint32_t *p_measurement_timing_budget_micro_seconds)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- VL53L0X_SchedulerSequenceSteps_t SchedulerSequenceSteps;
- uint32_t FinalRangeTimeoutMicroSeconds;
- uint32_t MsrcDccTccTimeoutMicroSeconds = 2000;
- uint32_t StartOverheadMicroSeconds = 1910;
- uint32_t EndOverheadMicroSeconds = 960;
- uint32_t MsrcOverheadMicroSeconds = 660;
- uint32_t TccOverheadMicroSeconds = 590;
- uint32_t DssOverheadMicroSeconds = 690;
- uint32_t PreRangeOverheadMicroSeconds = 660;
- uint32_t FinalRangeOverheadMicroSeconds = 550;
- uint32_t PreRangeTimeoutMicroSeconds = 0;
-
- LOG_FUNCTION_START("");
-
- /* Start and end overhead times always present */
- *pMeasurementTimingBudgetMicroSeconds
- = StartOverheadMicroSeconds + EndOverheadMicroSeconds;
-
- Status = VL53L0X_GetSequenceStepEnables(Dev, &SchedulerSequenceSteps);
-
- if (Status != VL53L0X_ERROR_NONE) {
- LOG_FUNCTION_END(Status);
- return Status;
- }
-
-
- if (SchedulerSequenceSteps.TccOn ||
- SchedulerSequenceSteps.MsrcOn ||
- SchedulerSequenceSteps.DssOn) {
-
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_MSRC,
- &MsrcDccTccTimeoutMicroSeconds);
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (SchedulerSequenceSteps.TccOn) {
- *pMeasurementTimingBudgetMicroSeconds +=
- MsrcDccTccTimeoutMicroSeconds +
- TccOverheadMicroSeconds;
- }
-
- if (SchedulerSequenceSteps.DssOn) {
- *pMeasurementTimingBudgetMicroSeconds +=
- 2 * (MsrcDccTccTimeoutMicroSeconds +
- DssOverheadMicroSeconds);
- } else if (SchedulerSequenceSteps.MsrcOn) {
- *pMeasurementTimingBudgetMicroSeconds +=
- MsrcDccTccTimeoutMicroSeconds +
- MsrcOverheadMicroSeconds;
- }
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (SchedulerSequenceSteps.PreRangeOn) {
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_PRE_RANGE,
- &PreRangeTimeoutMicroSeconds);
- *pMeasurementTimingBudgetMicroSeconds +=
- PreRangeTimeoutMicroSeconds +
- PreRangeOverheadMicroSeconds;
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (SchedulerSequenceSteps.FinalRangeOn) {
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_FINAL_RANGE,
- &FinalRangeTimeoutMicroSeconds);
- *pMeasurementTimingBudgetMicroSeconds +=
- (FinalRangeTimeoutMicroSeconds +
- FinalRangeOverheadMicroSeconds);
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETPARAMETERFIELD(Dev,
- MeasurementTimingBudgetMicroSeconds,
- *pMeasurementTimingBudgetMicroSeconds);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ VL53L0X_SchedulerSequenceSteps_t scheduler_sequence_steps;
+ uint32_t final_range_timeout_micro_seconds;
+ uint32_t msrc_dcc_tcc_timeout_micro_seconds = 2000;
+ uint32_t start_overhead_micro_seconds = 1910;
+ uint32_t end_overhead_micro_seconds = 960;
+ uint32_t msrc_overhead_micro_seconds = 660;
+ uint32_t tcc_overhead_micro_seconds = 590;
+ uint32_t dss_overhead_micro_seconds = 690;
+ uint32_t pre_range_overhead_micro_seconds = 660;
+ uint32_t final_range_overhead_micro_seconds = 550;
+ uint32_t pre_range_timeout_micro_seconds = 0;
+
+ LOG_FUNCTION_START("");
+
+ /* Start and end overhead times always present */
+ *p_measurement_timing_budget_micro_seconds
+ = start_overhead_micro_seconds + end_overhead_micro_seconds;
+
+ status = vl53l0x_get_sequence_step_enables(dev, &scheduler_sequence_steps);
+
+ if (status != VL53L0X_ERROR_NONE) {
+ LOG_FUNCTION_END(status);
+ return status;
+ }
+
+
+ if (scheduler_sequence_steps.TccOn ||
+ scheduler_sequence_steps.MsrcOn ||
+ scheduler_sequence_steps.DssOn) {
+
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_MSRC,
+ &msrc_dcc_tcc_timeout_micro_seconds);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (scheduler_sequence_steps.TccOn) {
+ *p_measurement_timing_budget_micro_seconds +=
+ msrc_dcc_tcc_timeout_micro_seconds +
+ tcc_overhead_micro_seconds;
+ }
+
+ if (scheduler_sequence_steps.DssOn) {
+ *p_measurement_timing_budget_micro_seconds +=
+ 2 * (msrc_dcc_tcc_timeout_micro_seconds +
+ dss_overhead_micro_seconds);
+ } else if (scheduler_sequence_steps.MsrcOn) {
+ *p_measurement_timing_budget_micro_seconds +=
+ msrc_dcc_tcc_timeout_micro_seconds +
+ msrc_overhead_micro_seconds;
+ }
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (scheduler_sequence_steps.PreRangeOn) {
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_PRE_RANGE,
+ &pre_range_timeout_micro_seconds);
+ *p_measurement_timing_budget_micro_seconds +=
+ pre_range_timeout_micro_seconds +
+ pre_range_overhead_micro_seconds;
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (scheduler_sequence_steps.FinalRangeOn) {
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_FINAL_RANGE,
+ &final_range_timeout_micro_seconds);
+ *p_measurement_timing_budget_micro_seconds +=
+ (final_range_timeout_micro_seconds +
+ final_range_overhead_micro_seconds);
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETPARAMETERFIELD(dev,
+ MeasurementTimingBudgetMicroSeconds,
+ *p_measurement_timing_budget_micro_seconds);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetMeasurementTimingBudgetMicroSeconds(VL53L0X_DEV Dev,
- uint32_t *pMeasurementTimingBudgetMicroSeconds)
+VL53L0X_Error VL53L0X::vl53l0x_get_measurement_timing_budget_micro_seconds(VL53L0X_DEV dev,
+ uint32_t *p_measurement_timing_budget_micro_seconds)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_get_measurement_timing_budget_micro_seconds(Dev,
- pMeasurementTimingBudgetMicroSeconds);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_get_measurement_timing_budget_micro_seconds(dev,
+ p_measurement_timing_budget_micro_seconds);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetDeviceParameters(VL53L0X_DEV Dev,
- VL53L0X_DeviceParameters_t *pDeviceParameters)
+VL53L0X_Error VL53L0X::vl53l0x_get_device_parameters(VL53L0X_DEV dev,
+ VL53L0X_DeviceParameters_t *p_device_parameters)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- int i;
-
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_GetDeviceMode(Dev, &(pDeviceParameters->DeviceMode));
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetInterMeasurementPeriodMilliSeconds(Dev,
- &(pDeviceParameters->InterMeasurementPeriodMilliSeconds));
-
-
- if (Status == VL53L0X_ERROR_NONE)
- pDeviceParameters->XTalkCompensationEnable = 0;
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetXTalkCompensationRateMegaCps(Dev,
- &(pDeviceParameters->XTalkCompensationRateMegaCps));
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetOffsetCalibrationDataMicroMeter(Dev,
- &(pDeviceParameters->RangeOffsetMicroMeters));
-
-
- if (Status == VL53L0X_ERROR_NONE) {
- for (i = 0; i < VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS; i++) {
- /* get first the values, then the enables.
- * VL53L0X_GetLimitCheckValue will modify the enable
- * flags
- */
- if (Status == VL53L0X_ERROR_NONE) {
- Status |= VL53L0X_GetLimitCheckValue(Dev, i,
- &(pDeviceParameters->LimitChecksValue[i]));
- } else {
- break;
- }
- if (Status == VL53L0X_ERROR_NONE) {
- Status |= VL53L0X_GetLimitCheckEnable(Dev, i,
- &(pDeviceParameters->LimitChecksEnable[i]));
- } else {
- break;
- }
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetWrapAroundCheckEnable(Dev,
- &(pDeviceParameters->WrapAroundCheckEnable));
- }
-
- /* Need to be done at the end as it uses VCSELPulsePeriod */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetMeasurementTimingBudgetMicroSeconds(Dev,
- &(pDeviceParameters->MeasurementTimingBudgetMicroSeconds));
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ int i;
+
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_get_device_mode(dev, &(p_device_parameters->DeviceMode));
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_inter_measurement_period_milli_seconds(dev,
+ &(p_device_parameters->InterMeasurementPeriodMilliSeconds));
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ p_device_parameters->XTalkCompensationEnable = 0;
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_x_talk_compensation_rate_mega_cps(dev,
+ &(p_device_parameters->XTalkCompensationRateMegaCps));
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_offset_calibration_data_micro_meter(dev,
+ &(p_device_parameters->RangeOffsetMicroMeters));
+
+
+ if (status == VL53L0X_ERROR_NONE) {
+ for (i = 0; i < VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS; i++) {
+ /* get first the values, then the enables.
+ * VL53L0X_GetLimitCheckValue will modify the enable
+ * flags
+ */
+ if (status == VL53L0X_ERROR_NONE) {
+ status |= vl53l0x_get_limit_check_value(dev, i,
+ &(p_device_parameters->LimitChecksValue[i]));
+ } else {
+ break;
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ status |= vl53l0x_get_limit_check_enable(dev, i,
+ &(p_device_parameters->LimitChecksEnable[i]));
+ } else {
+ break;
+ }
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_wrap_around_check_enable(dev,
+ &(p_device_parameters->WrapAroundCheckEnable));
+ }
+
+ /* Need to be done at the end as it uses VCSELPulsePeriod */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_measurement_timing_budget_micro_seconds(dev,
+ &(p_device_parameters->MeasurementTimingBudgetMicroSeconds));
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetLimitCheckValue(VL53L0X_DEV Dev, uint16_t LimitCheckId,
- FixPoint1616_t LimitCheckValue)
+VL53L0X_Error VL53L0X::vl53l0x_set_limit_check_value(VL53L0X_DEV dev, uint16_t limit_check_id,
+ FixPoint1616_t limit_check_value)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t Temp8;
-
- LOG_FUNCTION_START("");
-
- VL53L0X_GETARRAYPARAMETERFIELD(Dev, LimitChecksEnable, LimitCheckId,
- Temp8);
-
- if (Temp8 == 0) { /* disabled write only internal value */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- LimitCheckId, LimitCheckValue);
- } else {
-
- switch (LimitCheckId) {
-
- case VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE:
- /* internal computation: */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
- LimitCheckValue);
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE:
-
- Status = VL53L0X_WrWord(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
- VL53L0X_FIXPOINT1616TOFIXPOINT97(
- LimitCheckValue));
-
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP:
-
- /* internal computation: */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
- LimitCheckValue);
-
- break;
-
- case VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD:
-
- /* internal computation: */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
- LimitCheckValue);
-
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC:
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE:
-
- Status = VL53L0X_WrWord(Dev,
- VL53L0X_REG_PRE_RANGE_MIN_COUNT_RATE_RTN_LIMIT,
- VL53L0X_FIXPOINT1616TOFIXPOINT97(
- LimitCheckValue));
-
- break;
-
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
-
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- LimitCheckId, LimitCheckValue);
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t temp8;
+
+ LOG_FUNCTION_START("");
+
+ VL53L0X_GETARRAYPARAMETERFIELD(dev, LimitChecksEnable, limit_check_id,
+ temp8);
+
+ if (temp8 == 0) { /* disabled write only internal value */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ limit_check_id, limit_check_value);
+ } else {
+
+ switch (limit_check_id) {
+
+ case VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE:
+ /* internal computation: */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
+ limit_check_value);
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE:
+
+ status = vl53l0x_write_word(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
+ VL53L0X_FIXPOINT1616TOFIXPOINT97(
+ limit_check_value));
+
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP:
+
+ /* internal computation: */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
+ limit_check_value);
+
+ break;
+
+ case VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD:
+
+ /* internal computation: */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
+ limit_check_value);
+
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC:
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE:
+
+ status = vl53l0x_write_word(dev,
+ VL53L0X_REG_PRE_RANGE_MIN_COUNT_RATE_RTN_LIMIT,
+ VL53L0X_FIXPOINT1616TOFIXPOINT97(
+ limit_check_value));
+
+ break;
+
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ limit_check_id, limit_check_value);
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_DataInit(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_data_init(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- VL53L0X_DeviceParameters_t CurrentParameters;
- int i;
- uint8_t StopVariable;
-
- LOG_FUNCTION_START("");
-
- /* by default the I2C is running at 1V8 if you want to change it you
- * need to include this define at compilation level. */
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ VL53L0X_DeviceParameters_t CurrentParameters;
+ int i;
+ uint8_t StopVariable;
+
+ LOG_FUNCTION_START("");
+
+ /* by default the I2C is running at 1V8 if you want to change it you
+ * need to include this define at compilation level. */
#ifdef USE_I2C_2V8
- Status = VL53L0X_UpdateByte(Dev,
- VL53L0X_REG_VHV_CONFIG_PAD_SCL_SDA__EXTSUP_HV,
- 0xFE,
- 0x01);
+ Status = VL53L0X_UpdateByte(Dev,
+ VL53L0X_REG_VHV_CONFIG_PAD_SCL_SDA__EXTSUP_HV,
+ 0xFE,
+ 0x01);
#endif
- /* Set I2C standard mode */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, 0x88, 0x00);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, ReadDataFromDeviceDone, 0);
+ /* Set I2C standard mode */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0x88, 0x00);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, ReadDataFromDeviceDone, 0);
#ifdef USE_IQC_STATION
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_apply_offset_adjustment(Dev);
+ if (Status == VL53L0X_ERROR_NONE)
+ Status = VL53L0X_apply_offset_adjustment(Dev);
#endif
- /* Default value is 1000 for Linearity Corrective Gain */
- PALDevDataSet(Dev, LinearityCorrectiveGain, 1000);
-
- /* Dmax default Parameter */
- PALDevDataSet(Dev, DmaxCalRangeMilliMeter, 400);
- PALDevDataSet(Dev, DmaxCalSignalRateRtnMegaCps,
- (FixPoint1616_t)((0x00016B85))); /* 1.42 No Cover Glass*/
-
- /* Set Default static parameters
- *set first temporary values 9.44MHz * 65536 = 618660 */
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, OscFrequencyMHz, 618660);
-
- /* Set Default XTalkCompensationRateMegaCps to 0 */
- VL53L0X_SETPARAMETERFIELD(Dev, XTalkCompensationRateMegaCps, 0);
-
- /* Get default parameters */
- Status = VL53L0X_GetDeviceParameters(Dev, &CurrentParameters);
- if (Status == VL53L0X_ERROR_NONE) {
- /* initialize PAL values */
- CurrentParameters.DeviceMode = VL53L0X_DEVICEMODE_SINGLE_RANGING;
- CurrentParameters.HistogramMode = VL53L0X_HISTOGRAMMODE_DISABLED;
- PALDevDataSet(Dev, CurrentParameters, CurrentParameters);
- }
-
- /* Sigma estimator variable */
- PALDevDataSet(Dev, SigmaEstRefArray, 100);
- PALDevDataSet(Dev, SigmaEstEffPulseWidth, 900);
- PALDevDataSet(Dev, SigmaEstEffAmbWidth, 500);
- PALDevDataSet(Dev, targetRefRate, 0x0A00); /* 20 MCPS in 9:7 format */
-
- /* Use internal default settings */
- PALDevDataSet(Dev, UseInternalTuningSettings, 1);
-
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x00);
- Status |= VL53L0X_RdByte(Dev, 0x91, &StopVariable);
- PALDevDataSet(Dev, StopVariable, StopVariable);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x00);
-
- /* Enable all check */
- for (i = 0; i < VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS; i++) {
- if (Status == VL53L0X_ERROR_NONE)
- Status |= VL53L0X_SetLimitCheckEnable(Dev, i, 1);
- else
- break;
-
- }
-
- /* Disable the following checks */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_SetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP, 0);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_SetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD, 0);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_SetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC, 0);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_SetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE, 0);
-
- /* Limit default values */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
- (FixPoint1616_t)(18 * 65536));
- }
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE,
- (FixPoint1616_t)(25 * 65536 / 100));
- /* 0.25 * 65536 */
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
- (FixPoint1616_t)(35 * 65536));
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
- (FixPoint1616_t)(0 * 65536));
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
-
- PALDevDataSet(Dev, SequenceConfig, 0xFF);
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- 0xFF);
-
- /* Set PAL state to tell that we are waiting for call to
- * VL53L0X_StaticInit */
- PALDevDataSet(Dev, PalState, VL53L0X_STATE_WAIT_STATICINIT);
- }
-
- if (Status == VL53L0X_ERROR_NONE)
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, RefSpadsInitialised, 0);
-
-
- LOG_FUNCTION_END(Status);
- return Status;
+ /* Default value is 1000 for Linearity Corrective Gain */
+ PALDevDataSet(dev, LinearityCorrectiveGain, 1000);
+
+ /* Dmax default Parameter */
+ PALDevDataSet(dev, DmaxCalRangeMilliMeter, 400);
+ PALDevDataSet(dev, DmaxCalSignalRateRtnMegaCps,
+ (FixPoint1616_t)((0x00016B85))); /* 1.42 No Cover Glass*/
+
+ /* Set Default static parameters
+ *set first temporary values 9.44MHz * 65536 = 618660 */
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, OscFrequencyMHz, 618660);
+
+ /* Set Default XTalkCompensationRateMegaCps to 0 */
+ VL53L0X_SETPARAMETERFIELD(dev, XTalkCompensationRateMegaCps, 0);
+
+ /* Get default parameters */
+ status = vl53l0x_get_device_parameters(dev, &CurrentParameters);
+ if (status == VL53L0X_ERROR_NONE) {
+ /* initialize PAL values */
+ CurrentParameters.DeviceMode = VL53L0X_DEVICEMODE_SINGLE_RANGING;
+ CurrentParameters.HistogramMode = VL53L0X_HISTOGRAMMODE_DISABLED;
+ PALDevDataSet(dev, CurrentParameters, CurrentParameters);
+ }
+
+ /* Sigma estimator variable */
+ PALDevDataSet(dev, SigmaEstRefArray, 100);
+ PALDevDataSet(dev, SigmaEstEffPulseWidth, 900);
+ PALDevDataSet(dev, SigmaEstEffAmbWidth, 500);
+ PALDevDataSet(dev, targetRefRate, 0x0A00); /* 20 MCPS in 9:7 format */
+
+ /* Use internal default settings */
+ PALDevDataSet(dev, UseInternalTuningSettings, 1);
+
+ status |= vl53l0x_write_byte(dev, 0x80, 0x01);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x00);
+ status |= vl53l0x_read_byte(dev, 0x91, &StopVariable);
+ PALDevDataSet(dev, StopVariable, StopVariable);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x01);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x00);
+ status |= vl53l0x_write_byte(dev, 0x80, 0x00);
+
+ /* Enable all check */
+ for (i = 0; i < VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS; i++) {
+ if (status == VL53L0X_ERROR_NONE)
+ status |= vl53l0x_set_limit_check_enable(dev, i, 1);
+ else
+ break;
+
+ }
+
+ /* Disable the following checks */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_set_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP, 0);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_set_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD, 0);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_set_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC, 0);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_set_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE, 0);
+
+ /* Limit default values */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_set_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
+ (FixPoint1616_t)(18 * 65536));
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_set_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE,
+ (FixPoint1616_t)(25 * 65536 / 100));
+ /* 0.25 * 65536 */
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_set_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
+ (FixPoint1616_t)(35 * 65536));
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_set_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
+ (FixPoint1616_t)(0 * 65536));
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+
+ PALDevDataSet(dev, SequenceConfig, 0xFF);
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ 0xFF);
+
+ /* Set PAL state to tell that we are waiting for call to
+ * VL53L0X_StaticInit */
+ PALDevDataSet(dev, PalState, VL53L0X_STATE_WAIT_STATICINIT);
+ }
+
+ if (status == VL53L0X_ERROR_NONE)
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, RefSpadsInitialised, 0);
+
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_check_part_used(VL53L0X_DEV Dev,
- uint8_t *Revision,
- VL53L0X_DeviceInfo_t *pVL53L0X_DeviceInfo)
+VL53L0X_Error VL53L0X::vl53l0x_check_part_used(VL53L0X_DEV dev,
+ uint8_t *revision,
+ VL53L0X_DeviceInfo_t *p_vl53l0x_device_info)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t ModuleIdInt;
- char *ProductId_tmp;
-
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_get_info_from_device(Dev, 2);
-
- if (Status == VL53L0X_ERROR_NONE) {
- ModuleIdInt = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev, ModuleId);
-
- if (ModuleIdInt == 0) {
- *Revision = 0;
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->ProductId, "");
- } else {
- *Revision = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev, Revision);
- ProductId_tmp = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- ProductId);
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->ProductId, ProductId_tmp);
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t module_id_int;
+ char *product_id_tmp;
+
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_get_info_from_device(dev, 2);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ module_id_int = VL53L0X_GETDEVICESPECIFICPARAMETER(dev, ModuleId);
+
+ if (module_id_int == 0) {
+ *revision = 0;
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->ProductId, "");
+ } else {
+ *revision = VL53L0X_GETDEVICESPECIFICPARAMETER(dev, Revision);
+ product_id_tmp = VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ ProductId);
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->ProductId, product_id_tmp);
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_device_info(VL53L0X_DEV Dev,
- VL53L0X_DeviceInfo_t *pVL53L0X_DeviceInfo)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_get_device_info(VL53L0X_DEV dev,
+ VL53L0X_DeviceInfo_t *p_vl53l0x_device_info)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t revision_id;
- uint8_t Revision;
-
- Status = VL53L0X_check_part_used(Dev, &Revision, pVL53L0X_DeviceInfo);
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (Revision == 0) {
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->Name,
- VL53L0X_STRING_DEVICE_INFO_NAME_TS0);
- } else if ((Revision <= 34) && (Revision != 32)) {
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->Name,
- VL53L0X_STRING_DEVICE_INFO_NAME_TS1);
- } else if (Revision < 39) {
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->Name,
- VL53L0X_STRING_DEVICE_INFO_NAME_TS2);
- } else {
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->Name,
- VL53L0X_STRING_DEVICE_INFO_NAME_ES1);
- }
-
- VL53L0X_COPYSTRING(pVL53L0X_DeviceInfo->Type,
- VL53L0X_STRING_DEVICE_INFO_TYPE);
-
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_IDENTIFICATION_MODEL_ID,
- &pVL53L0X_DeviceInfo->ProductType);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdByte(Dev,
- VL53L0X_REG_IDENTIFICATION_REVISION_ID,
- &revision_id);
- pVL53L0X_DeviceInfo->ProductRevisionMajor = 1;
- pVL53L0X_DeviceInfo->ProductRevisionMinor =
- (revision_id & 0xF0) >> 4;
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t revision_id;
+ uint8_t revision;
+
+ status = vl53l0x_check_part_used(dev, &revision, p_vl53l0x_device_info);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (revision == 0) {
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->Name,
+ VL53L0X_STRING_DEVICE_INFO_NAME_TS0);
+ } else if ((revision <= 34) && (revision != 32)) {
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->Name,
+ VL53L0X_STRING_DEVICE_INFO_NAME_TS1);
+ } else if (revision < 39) {
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->Name,
+ VL53L0X_STRING_DEVICE_INFO_NAME_TS2);
+ } else {
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->Name,
+ VL53L0X_STRING_DEVICE_INFO_NAME_ES1);
+ }
+
+ VL53L0X_COPYSTRING(p_vl53l0x_device_info->Type,
+ VL53L0X_STRING_DEVICE_INFO_TYPE);
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_IDENTIFICATION_MODEL_ID,
+ &p_vl53l0x_device_info->ProductType);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_byte(dev,
+ VL53L0X_REG_IDENTIFICATION_REVISION_ID,
+ &revision_id);
+ p_vl53l0x_device_info->ProductRevisionMajor = 1;
+ p_vl53l0x_device_info->ProductRevisionMinor =
+ (revision_id & 0xF0) >> 4;
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetDeviceInfo(VL53L0X_DEV Dev,
- VL53L0X_DeviceInfo_t *pVL53L0X_DeviceInfo)
+VL53L0X_Error VL53L0X::vl53l0x_get_device_info(VL53L0X_DEV dev,
+ VL53L0X_DeviceInfo_t *p_vl53l0x_device_info)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_get_device_info(Dev, pVL53L0X_DeviceInfo);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_get_device_info(dev, p_vl53l0x_device_info);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetInterruptMaskStatus(VL53L0X_DEV Dev,
- uint32_t *pInterruptMaskStatus)
+VL53L0X_Error VL53L0X::vl53l0x_get_interrupt_mask_status(VL53L0X_DEV dev,
+ uint32_t *p_interrupt_mask_status)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t Byte;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_RESULT_INTERRUPT_STATUS, &Byte);
- *pInterruptMaskStatus = Byte & 0x07;
-
- if (Byte & 0x18)
- Status = VL53L0X_ERROR_RANGE_ERROR;
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t byte;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_RESULT_INTERRUPT_STATUS, &byte);
+ *p_interrupt_mask_status = byte & 0x07;
+
+ if (byte & 0x18)
+ status = VL53L0X_ERROR_RANGE_ERROR;
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetMeasurementDataReady(VL53L0X_DEV Dev,
- uint8_t *pMeasurementDataReady)
+VL53L0X_Error VL53L0X::vl53l0x_get_measurement_data_ready(VL53L0X_DEV dev,
+ uint8_t *p_measurement_data_ready)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t SysRangeStatusRegister;
- uint8_t InterruptConfig;
- uint32_t InterruptMask;
- LOG_FUNCTION_START("");
-
- InterruptConfig = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- Pin0GpioFunctionality);
-
- if (InterruptConfig ==
- VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY) {
- Status = VL53L0X_GetInterruptMaskStatus(Dev, &InterruptMask);
- if (InterruptMask ==
- VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY)
- *pMeasurementDataReady = 1;
- else
- *pMeasurementDataReady = 0;
- } else {
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_RESULT_RANGE_STATUS,
- &SysRangeStatusRegister);
- if (Status == VL53L0X_ERROR_NONE) {
- if (SysRangeStatusRegister & 0x01)
- *pMeasurementDataReady = 1;
- else
- *pMeasurementDataReady = 0;
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t sys_range_status_register;
+ uint8_t interrupt_config;
+ uint32_t interrupt_mask;
+ LOG_FUNCTION_START("");
+
+ interrupt_config = VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ Pin0GpioFunctionality);
+
+ if (interrupt_config ==
+ VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY) {
+ status = vl53l0x_get_interrupt_mask_status(dev, &interrupt_mask);
+ if (interrupt_mask ==
+ VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY)
+ *p_measurement_data_ready = 1;
+ else
+ *p_measurement_data_ready = 0;
+ } else {
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_RESULT_RANGE_STATUS,
+ &sys_range_status_register);
+ if (status == VL53L0X_ERROR_NONE) {
+ if (sys_range_status_register & 0x01)
+ *p_measurement_data_ready = 1;
+ else
+ *p_measurement_data_ready = 0;
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_PollingDelay(VL53L0X_DEV Dev) {
+VL53L0X_Error VL53L0X::vl53l0x_polling_delay(VL53L0X_DEV dev)
+{
VL53L0X_Error status = VL53L0X_ERROR_NONE;
// do nothing
@@ -1823,3390 +1825,3375 @@
return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_measurement_poll_for_completion(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_measurement_poll_for_completion(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t NewDataReady = 0;
- uint32_t LoopNb;
-
- LOG_FUNCTION_START("");
-
- LoopNb = 0;
-
- do {
- Status = VL53L0X_GetMeasurementDataReady(Dev, &NewDataReady);
- if (Status != 0)
- break; /* the error is set */
-
- if (NewDataReady == 1)
- break; /* done note that status == 0 */
-
- LoopNb++;
- if (LoopNb >= VL53L0X_DEFAULT_MAX_LOOP) {
- Status = VL53L0X_ERROR_TIME_OUT;
- break;
- }
-
- VL53L0X_PollingDelay(Dev);
- } while (1);
-
- LOG_FUNCTION_END(Status);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t new_data_ready = 0;
+ uint32_t loop_nb;
+
+ LOG_FUNCTION_START("");
+
+ loop_nb = 0;
+
+ do {
+ status = vl53l0x_get_measurement_data_ready(dev, &new_data_ready);
+ if (status != 0)
+ break; /* the error is set */
+
+ if (new_data_ready == 1)
+ break; /* done note that status == 0 */
+
+ loop_nb++;
+ if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP) {
+ status = VL53L0X_ERROR_TIME_OUT;
+ break;
+ }
+
+ vl53l0x_polling_delay(dev);
+ } while (1);
+
+ LOG_FUNCTION_END(status);
+
+ return status;
}
/* Group PAL Interrupt Functions */
-VL53L0X_Error VL53L0X::VL53L0X_ClearInterruptMask(VL53L0X_DEV Dev, uint32_t InterruptMask)
+VL53L0X_Error VL53L0X::vl53l0x_clear_interrupt_mask(VL53L0X_DEV dev, uint32_t interrupt_mask)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t LoopCount;
- uint8_t Byte;
- LOG_FUNCTION_START("");
-
- /* clear bit 0 range interrupt, bit 1 error interrupt */
- LoopCount = 0;
- do {
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR, 0x01);
- Status |= VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR, 0x00);
- Status |= VL53L0X_RdByte(Dev,
- VL53L0X_REG_RESULT_INTERRUPT_STATUS, &Byte);
- LoopCount++;
- } while (((Byte & 0x07) != 0x00)
- && (LoopCount < 3)
- && (Status == VL53L0X_ERROR_NONE));
-
-
- if (LoopCount >= 3)
- Status = VL53L0X_ERROR_INTERRUPT_NOT_CLEARED;
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t loop_count;
+ uint8_t byte;
+ LOG_FUNCTION_START("");
+
+ /* clear bit 0 range interrupt, bit 1 error interrupt */
+ loop_count = 0;
+ do {
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR, 0x01);
+ status |= vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR, 0x00);
+ status |= vl53l0x_read_byte(dev,
+ VL53L0X_REG_RESULT_INTERRUPT_STATUS, &byte);
+ loop_count++;
+ } while (((byte & 0x07) != 0x00)
+ && (loop_count < 3)
+ && (status == VL53L0X_ERROR_NONE));
+
+
+ if (loop_count >= 3)
+ status = VL53L0X_ERROR_INTERRUPT_NOT_CLEARED;
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_perform_single_ref_calibration(VL53L0X_DEV Dev,
- uint8_t vhv_init_byte)
+VL53L0X_Error VL53L0X::vl53l0x_perform_single_ref_calibration(VL53L0X_DEV dev,
+ uint8_t vhv_init_byte)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSRANGE_START,
- VL53L0X_REG_SYSRANGE_MODE_START_STOP |
- vhv_init_byte);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_measurement_poll_for_completion(Dev);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_ClearInterruptMask(Dev, 0);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSRANGE_START, 0x00);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSRANGE_START,
+ VL53L0X_REG_SYSRANGE_MODE_START_STOP |
+ vhv_init_byte);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_measurement_poll_for_completion(dev);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_clear_interrupt_mask(dev, 0);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSRANGE_START, 0x00);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_ref_calibration_io(VL53L0X_DEV Dev, uint8_t read_not_write,
- uint8_t VhvSettings, uint8_t PhaseCal,
- uint8_t *pVhvSettings, uint8_t *pPhaseCal,
- const uint8_t vhv_enable, const uint8_t phase_enable)
+VL53L0X_Error VL53L0X::vl53l0x_ref_calibration_io(VL53L0X_DEV dev, uint8_t read_not_write,
+ uint8_t vhv_settings, uint8_t phase_cal,
+ uint8_t *p_vhv_settings, uint8_t *p_phase_cal,
+ const uint8_t vhv_enable, const uint8_t phase_enable)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t PhaseCalint = 0;
-
- /* Read VHV from device */
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- if (read_not_write) {
- if (vhv_enable)
- Status |= VL53L0X_RdByte(Dev, 0xCB, pVhvSettings);
- if (phase_enable)
- Status |= VL53L0X_RdByte(Dev, 0xEE, &PhaseCalint);
- } else {
- if (vhv_enable)
- Status |= VL53L0X_WrByte(Dev, 0xCB, VhvSettings);
- if (phase_enable)
- Status |= VL53L0X_UpdateByte(Dev, 0xEE, 0x80, PhaseCal);
- }
-
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- *pPhaseCal = (uint8_t)(PhaseCalint&0xEF);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t phase_calint = 0;
+
+ /* Read VHV from device */
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x00);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ if (read_not_write) {
+ if (vhv_enable)
+ status |= vl53l0x_read_byte(dev, 0xCB, p_vhv_settings);
+ if (phase_enable)
+ status |= vl53l0x_read_byte(dev, 0xEE, &phase_calint);
+ } else {
+ if (vhv_enable)
+ status |= vl53l0x_write_byte(dev, 0xCB, vhv_settings);
+ if (phase_enable)
+ status |= vl53l0x_update_byte(dev, 0xEE, 0x80, phase_cal);
+ }
+
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x01);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ *p_phase_cal = (uint8_t)(phase_calint & 0xEF);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_perform_vhv_calibration(VL53L0X_DEV Dev,
- uint8_t *pVhvSettings, const uint8_t get_data_enable,
- const uint8_t restore_config)
+VL53L0X_Error VL53L0X::vl53l0x_perform_vhv_calibration(VL53L0X_DEV dev,
+ uint8_t *p_vhv_settings, const uint8_t get_data_enable,
+ const uint8_t restore_config)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t SequenceConfig = 0;
- uint8_t VhvSettings = 0;
- uint8_t PhaseCal = 0;
- uint8_t PhaseCalInt = 0;
-
- /* store the value of the sequence config,
- * this will be reset before the end of the function
- */
-
- if (restore_config)
- SequenceConfig = PALDevDataGet(Dev, SequenceConfig);
-
- /* Run VHV */
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0x01);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_perform_single_ref_calibration(Dev, 0x40);
-
- /* Read VHV from device */
- if ((Status == VL53L0X_ERROR_NONE) && (get_data_enable == 1)) {
- Status = VL53L0X_ref_calibration_io(Dev, 1,
- VhvSettings, PhaseCal, /* Not used here */
- pVhvSettings, &PhaseCalInt,
- 1, 0);
- } else
- *pVhvSettings = 0;
-
-
- if ((Status == VL53L0X_ERROR_NONE) && restore_config) {
- /* restore the previous Sequence Config */
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- SequenceConfig);
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, SequenceConfig, SequenceConfig);
-
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t sequence_config = 0;
+ uint8_t vhv_settings = 0;
+ uint8_t phase_cal = 0;
+ uint8_t phase_cal_int = 0;
+
+ /* store the value of the sequence config,
+ * this will be reset before the end of the function
+ */
+
+ if (restore_config)
+ sequence_config = PALDevDataGet(dev, SequenceConfig);
+
+ /* Run VHV */
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0x01);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_single_ref_calibration(dev, 0x40);
+
+ /* Read VHV from device */
+ if ((status == VL53L0X_ERROR_NONE) && (get_data_enable == 1)) {
+ status = vl53l0x_ref_calibration_io(dev, 1,
+ vhv_settings, phase_cal, /* Not used here */
+ p_vhv_settings, &phase_cal_int,
+ 1, 0);
+ } else
+ *p_vhv_settings = 0;
+
+
+ if ((status == VL53L0X_ERROR_NONE) && restore_config) {
+ /* restore the previous Sequence Config */
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ sequence_config);
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, SequenceConfig, sequence_config);
+
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_perform_phase_calibration(VL53L0X_DEV Dev,
- uint8_t *pPhaseCal, const uint8_t get_data_enable,
- const uint8_t restore_config)
+VL53L0X_Error VL53L0X::vl53l0x_perform_phase_calibration(VL53L0X_DEV dev,
+ uint8_t *p_phase_cal, const uint8_t get_data_enable,
+ const uint8_t restore_config)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t SequenceConfig = 0;
- uint8_t VhvSettings = 0;
- uint8_t PhaseCal = 0;
- uint8_t VhvSettingsint;
-
- /* store the value of the sequence config,
- * this will be reset before the end of the function
- */
-
- if (restore_config)
- SequenceConfig = PALDevDataGet(Dev, SequenceConfig);
-
- /* Run PhaseCal */
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0x02);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_perform_single_ref_calibration(Dev, 0x0);
-
- /* Read PhaseCal from device */
- if ((Status == VL53L0X_ERROR_NONE) && (get_data_enable == 1)) {
- Status = VL53L0X_ref_calibration_io(Dev, 1,
- VhvSettings, PhaseCal, /* Not used here */
- &VhvSettingsint, pPhaseCal,
- 0, 1);
- } else
- *pPhaseCal = 0;
-
-
- if ((Status == VL53L0X_ERROR_NONE) && restore_config) {
- /* restore the previous Sequence Config */
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- SequenceConfig);
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, SequenceConfig, SequenceConfig);
-
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t sequence_config = 0;
+ uint8_t vhv_settings = 0;
+ uint8_t phase_cal = 0;
+ uint8_t vhv_settingsint;
+
+ /* store the value of the sequence config,
+ * this will be reset before the end of the function
+ */
+
+ if (restore_config)
+ sequence_config = PALDevDataGet(dev, SequenceConfig);
+
+ /* Run PhaseCal */
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0x02);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_single_ref_calibration(dev, 0x0);
+
+ /* Read PhaseCal from device */
+ if ((status == VL53L0X_ERROR_NONE) && (get_data_enable == 1)) {
+ status = vl53l0x_ref_calibration_io(dev, 1,
+ vhv_settings, phase_cal, /* Not used here */
+ &vhv_settingsint, p_phase_cal,
+ 0, 1);
+ } else
+ *p_phase_cal = 0;
+
+
+ if ((status == VL53L0X_ERROR_NONE) && restore_config) {
+ /* restore the previous Sequence Config */
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ sequence_config);
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, SequenceConfig, sequence_config);
+
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_perform_ref_calibration(VL53L0X_DEV Dev,
- uint8_t *pVhvSettings, uint8_t *pPhaseCal, uint8_t get_data_enable)
+VL53L0X_Error VL53L0X::vl53l0x_perform_ref_calibration(VL53L0X_DEV dev,
+ uint8_t *p_vhv_settings, uint8_t *p_phase_cal, uint8_t get_data_enable)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t SequenceConfig = 0;
-
- /* store the value of the sequence config,
- * this will be reset before the end of the function
- */
-
- SequenceConfig = PALDevDataGet(Dev, SequenceConfig);
-
- /* In the following function we don't save the config to optimize
- * writes on device. Config is saved and restored only once. */
- Status = VL53L0X_perform_vhv_calibration(
- Dev, pVhvSettings, get_data_enable, 0);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_perform_phase_calibration(
- Dev, pPhaseCal, get_data_enable, 0);
-
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* restore the previous Sequence Config */
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- SequenceConfig);
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, SequenceConfig, SequenceConfig);
-
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t sequence_config = 0;
+
+ /* store the value of the sequence config,
+ * this will be reset before the end of the function
+ */
+
+ sequence_config = PALDevDataGet(dev, SequenceConfig);
+
+ /* In the following function we don't save the config to optimize
+ * writes on device. Config is saved and restored only once. */
+ status = vl53l0x_perform_vhv_calibration(
+ dev, p_vhv_settings, get_data_enable, 0);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_phase_calibration(
+ dev, p_phase_cal, get_data_enable, 0);
+
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* restore the previous Sequence Config */
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ sequence_config);
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, SequenceConfig, sequence_config);
+
+ }
+
+ return status;
}
-void VL53L0X::get_next_good_spad(uint8_t goodSpadArray[], uint32_t size,
- uint32_t curr, int32_t *next)
+void VL53L0X::get_next_good_spad(uint8_t good_spad_array[], uint32_t size,
+ uint32_t curr, int32_t *p_next)
{
- uint32_t startIndex;
- uint32_t fineOffset;
- uint32_t cSpadsPerByte = 8;
- uint32_t coarseIndex;
- uint32_t fineIndex;
- uint8_t dataByte;
- uint8_t success = 0;
-
- /*
- * Starting with the current good spad, loop through the array to find
- * the next. i.e. the next bit set in the sequence.
- *
- * The coarse index is the byte index of the array and the fine index is
- * the index of the bit within each byte.
- */
-
- *next = -1;
-
- startIndex = curr / cSpadsPerByte;
- fineOffset = curr % cSpadsPerByte;
-
- for (coarseIndex = startIndex; ((coarseIndex < size) && !success);
- coarseIndex++) {
- fineIndex = 0;
- dataByte = goodSpadArray[coarseIndex];
-
- if (coarseIndex == startIndex) {
- /* locate the bit position of the provided current
- * spad bit before iterating */
- dataByte >>= fineOffset;
- fineIndex = fineOffset;
- }
-
- while (fineIndex < cSpadsPerByte) {
- if ((dataByte & 0x1) == 1) {
- success = 1;
- *next = coarseIndex * cSpadsPerByte + fineIndex;
- break;
- }
- dataByte >>= 1;
- fineIndex++;
- }
- }
+ uint32_t start_index;
+ uint32_t fine_offset;
+ uint32_t c_spads_per_byte = 8;
+ uint32_t coarse_index;
+ uint32_t fine_index;
+ uint8_t data_byte;
+ uint8_t success = 0;
+
+ /*
+ * Starting with the current good spad, loop through the array to find
+ * the next. i.e. the next bit set in the sequence.
+ *
+ * The coarse index is the byte index of the array and the fine index is
+ * the index of the bit within each byte.
+ */
+
+ *p_next = -1;
+
+ start_index = curr / c_spads_per_byte;
+ fine_offset = curr % c_spads_per_byte;
+
+ for (coarse_index = start_index; ((coarse_index < size) && !success);
+ coarse_index++) {
+ fine_index = 0;
+ data_byte = good_spad_array[coarse_index];
+
+ if (coarse_index == start_index) {
+ /* locate the bit position of the provided current
+ * spad bit before iterating */
+ data_byte >>= fine_offset;
+ fine_index = fine_offset;
+ }
+
+ while (fine_index < c_spads_per_byte) {
+ if ((data_byte & 0x1) == 1) {
+ success = 1;
+ *p_next = coarse_index * c_spads_per_byte + fine_index;
+ break;
+ }
+ data_byte >>= 1;
+ fine_index++;
+ }
+ }
}
-uint8_t VL53L0X::is_aperture(uint32_t spadIndex)
+uint8_t VL53L0X::is_aperture(uint32_t spad_index)
{
- /*
- * This function reports if a given spad index is an aperture SPAD by
- * deriving the quadrant.
- */
- uint32_t quadrant;
- uint8_t isAperture = 1;
- quadrant = spadIndex >> 6;
- if (refArrayQuadrants[quadrant] == REF_ARRAY_SPAD_0)
- isAperture = 0;
-
- return isAperture;
+ /*
+ * This function reports if a given spad index is an aperture SPAD by
+ * deriving the quadrant.
+ */
+ uint32_t quadrant;
+ uint8_t is_aperture = 1;
+ quadrant = spad_index >> 6;
+ if (refArrayQuadrants[quadrant] == REF_ARRAY_SPAD_0)
+ is_aperture = 0;
+
+ return is_aperture;
}
-VL53L0X_Error VL53L0X::enable_spad_bit(uint8_t spadArray[], uint32_t size,
- uint32_t spadIndex)
+VL53L0X_Error VL53L0X::enable_spad_bit(uint8_t spad_array[], uint32_t size,
+ uint32_t spad_index)
{
- VL53L0X_Error status = VL53L0X_ERROR_NONE;
- uint32_t cSpadsPerByte = 8;
- uint32_t coarseIndex;
- uint32_t fineIndex;
-
- coarseIndex = spadIndex / cSpadsPerByte;
- fineIndex = spadIndex % cSpadsPerByte;
- if (coarseIndex >= size)
- status = VL53L0X_ERROR_REF_SPAD_INIT;
- else
- spadArray[coarseIndex] |= (1 << fineIndex);
-
- return status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint32_t c_spads_per_byte = 8;
+ uint32_t coarse_index;
+ uint32_t fine_index;
+
+ coarse_index = spad_index / c_spads_per_byte;
+ fine_index = spad_index % c_spads_per_byte;
+ if (coarse_index >= size)
+ status = VL53L0X_ERROR_REF_SPAD_INIT;
+ else
+ spad_array[coarse_index] |= (1 << fine_index);
+
+ return status;
}
-VL53L0X_Error VL53L0X::set_ref_spad_map(VL53L0X_DEV Dev, uint8_t *refSpadArray)
+VL53L0X_Error VL53L0X::set_ref_spad_map(VL53L0X_DEV dev, uint8_t *p_ref_spad_array)
{
- VL53L0X_Error status = VL53L0X_WriteMulti(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_0,
- refSpadArray, 6);
-
- return status;
+ VL53L0X_Error status = vl53l0x_write_multi(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_0,
+ p_ref_spad_array, 6);
+
+ return status;
}
-VL53L0X_Error VL53L0X::get_ref_spad_map(VL53L0X_DEV Dev, uint8_t *refSpadArray)
+VL53L0X_Error VL53L0X::get_ref_spad_map(VL53L0X_DEV dev, uint8_t *p_ref_spad_array)
{
- VL53L0X_Error status = VL53L0X_ReadMulti(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_0,
- refSpadArray,
- 6);
+ VL53L0X_Error status = vl53l0x_read_multi(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_0,
+ p_ref_spad_array,
+ 6);
// VL53L0X_Error status = VL53L0X_ERROR_NONE;
// uint8_t count=0;
// for (count = 0; count < 6; count++)
// status = VL53L0X_RdByte(Dev, (VL53L0X_REG_GLOBAL_CONFIG_SPAD_ENABLES_REF_0 + count), &refSpadArray[count]);
- return status;
+ return status;
}
-VL53L0X_Error VL53L0X::enable_ref_spads(VL53L0X_DEV Dev,
- uint8_t apertureSpads,
- uint8_t goodSpadArray[],
- uint8_t spadArray[],
- uint32_t size,
- uint32_t start,
- uint32_t offset,
- uint32_t spadCount,
- uint32_t *lastSpad)
+VL53L0X_Error VL53L0X::enable_ref_spads(VL53L0X_DEV dev,
+ uint8_t aperture_spads,
+ uint8_t good_spad_array[],
+ uint8_t spad_array[],
+ uint32_t size,
+ uint32_t start,
+ uint32_t offset,
+ uint32_t spad_count,
+ uint32_t *p_last_spad)
{
- VL53L0X_Error status = VL53L0X_ERROR_NONE;
- uint32_t index;
- uint32_t i;
- int32_t nextGoodSpad = offset;
- uint32_t currentSpad;
- uint8_t checkSpadArray[6];
-
- /*
- * This function takes in a spad array which may or may not have SPADS
- * already enabled and appends from a given offset a requested number
- * of new SPAD enables. The 'good spad map' is applied to
- * determine the next SPADs to enable.
- *
- * This function applies to only aperture or only non-aperture spads.
- * Checks are performed to ensure this.
- */
-
- currentSpad = offset;
- for (index = 0; index < spadCount; index++) {
- get_next_good_spad(goodSpadArray, size, currentSpad,
- &nextGoodSpad);
-
- if (nextGoodSpad == -1) {
- status = VL53L0X_ERROR_REF_SPAD_INIT;
- break;
- }
-
- /* Confirm that the next good SPAD is non-aperture */
- if (is_aperture(start + nextGoodSpad) != apertureSpads) {
- /* if we can't get the required number of good aperture
- * spads from the current quadrant then this is an error
- */
- status = VL53L0X_ERROR_REF_SPAD_INIT;
- break;
- }
- currentSpad = (uint32_t)nextGoodSpad;
- enable_spad_bit(spadArray, size, currentSpad);
- currentSpad++;
- }
- *lastSpad = currentSpad;
-
- if (status == VL53L0X_ERROR_NONE)
- status = set_ref_spad_map(Dev, spadArray);
-
-
- if (status == VL53L0X_ERROR_NONE) {
- status = get_ref_spad_map(Dev, checkSpadArray);
-
- i = 0;
-
- /* Compare spad maps. If not equal report error. */
- while (i < size) {
- if (spadArray[i] != checkSpadArray[i]) {
- status = VL53L0X_ERROR_REF_SPAD_INIT;
- break;
- }
- i++;
- }
- }
- return status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint32_t index;
+ uint32_t i;
+ int32_t next_good_spad = offset;
+ uint32_t current_spad;
+ uint8_t check_spad_array[6];
+
+ /*
+ * This function takes in a spad array which may or may not have SPADS
+ * already enabled and appends from a given offset a requested number
+ * of new SPAD enables. The 'good spad map' is applied to
+ * determine the next SPADs to enable.
+ *
+ * This function applies to only aperture or only non-aperture spads.
+ * Checks are performed to ensure this.
+ */
+
+ current_spad = offset;
+ for (index = 0; index < spad_count; index++) {
+ get_next_good_spad(good_spad_array, size, current_spad,
+ &next_good_spad);
+
+ if (next_good_spad == -1) {
+ status = VL53L0X_ERROR_REF_SPAD_INIT;
+ break;
+ }
+
+ /* Confirm that the next good SPAD is non-aperture */
+ if (is_aperture(start + next_good_spad) != aperture_spads) {
+ /* if we can't get the required number of good aperture
+ * spads from the current quadrant then this is an error
+ */
+ status = VL53L0X_ERROR_REF_SPAD_INIT;
+ break;
+ }
+ current_spad = (uint32_t)next_good_spad;
+ enable_spad_bit(spad_array, size, current_spad);
+ current_spad++;
+ }
+ *p_last_spad = current_spad;
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = set_ref_spad_map(dev, spad_array);
+
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = get_ref_spad_map(dev, check_spad_array);
+
+ i = 0;
+
+ /* Compare spad maps. If not equal report error. */
+ while (i < size) {
+ if (spad_array[i] != check_spad_array[i]) {
+ status = VL53L0X_ERROR_REF_SPAD_INIT;
+ break;
+ }
+ i++;
+ }
+ }
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetDeviceMode(VL53L0X_DEV Dev, VL53L0X_DeviceModes DeviceMode)
+VL53L0X_Error VL53L0X::vl53l0x_set_device_mode(VL53L0X_DEV dev, VL53L0X_DeviceModes device_mode)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
-
- LOG_FUNCTION_START("%d", (int)DeviceMode);
-
- switch (DeviceMode) {
- case VL53L0X_DEVICEMODE_SINGLE_RANGING:
- case VL53L0X_DEVICEMODE_CONTINUOUS_RANGING:
- case VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING:
- case VL53L0X_DEVICEMODE_GPIO_DRIVE:
- case VL53L0X_DEVICEMODE_GPIO_OSC:
- /* Supported modes */
- VL53L0X_SETPARAMETERFIELD(Dev, DeviceMode, DeviceMode);
- break;
- default:
- /* Unsupported mode */
- Status = VL53L0X_ERROR_MODE_NOT_SUPPORTED;
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+
+ LOG_FUNCTION_START("%d", (int)DeviceMode);
+
+ switch (device_mode) {
+ case VL53L0X_DEVICEMODE_SINGLE_RANGING:
+ case VL53L0X_DEVICEMODE_CONTINUOUS_RANGING:
+ case VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING:
+ case VL53L0X_DEVICEMODE_GPIO_DRIVE:
+ case VL53L0X_DEVICEMODE_GPIO_OSC:
+ /* Supported modes */
+ VL53L0X_SETPARAMETERFIELD(dev, DeviceMode, device_mode);
+ break;
+ default:
+ /* Unsupported mode */
+ status = VL53L0X_ERROR_MODE_NOT_SUPPORTED;
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetInterruptThresholds(VL53L0X_DEV Dev,
- VL53L0X_DeviceModes DeviceMode, FixPoint1616_t ThresholdLow,
- FixPoint1616_t ThresholdHigh)
+VL53L0X_Error VL53L0X::vl53l0x_set_interrupt_thresholds(VL53L0X_DEV dev,
+ VL53L0X_DeviceModes device_mode, FixPoint1616_t threshold_low,
+ FixPoint1616_t threshold_high)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint16_t Threshold16;
- LOG_FUNCTION_START("");
-
- /* no dependency on DeviceMode for Ewok */
- /* Need to divide by 2 because the FW will apply a x2 */
- Threshold16 = (uint16_t)((ThresholdLow >> 17) & 0x00fff);
- Status = VL53L0X_WrWord(Dev, VL53L0X_REG_SYSTEM_THRESH_LOW, Threshold16);
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* Need to divide by 2 because the FW will apply a x2 */
- Threshold16 = (uint16_t)((ThresholdHigh >> 17) & 0x00fff);
- Status = VL53L0X_WrWord(Dev, VL53L0X_REG_SYSTEM_THRESH_HIGH,
- Threshold16);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint16_t threshold16;
+ LOG_FUNCTION_START("");
+
+ /* no dependency on DeviceMode for Ewok */
+ /* Need to divide by 2 because the FW will apply a x2 */
+ threshold16 = (uint16_t)((threshold_low >> 17) & 0x00fff);
+ status = vl53l0x_write_word(dev, VL53L0X_REG_SYSTEM_THRESH_LOW, threshold16);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Need to divide by 2 because the FW will apply a x2 */
+ threshold16 = (uint16_t)((threshold_high >> 17) & 0x00fff);
+ status = vl53l0x_write_word(dev, VL53L0X_REG_SYSTEM_THRESH_HIGH,
+ threshold16);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetInterruptThresholds(VL53L0X_DEV Dev,
- VL53L0X_DeviceModes DeviceMode, FixPoint1616_t *pThresholdLow,
- FixPoint1616_t *pThresholdHigh)
+VL53L0X_Error VL53L0X::vl53l0x_get_interrupt_thresholds(VL53L0X_DEV dev,
+ VL53L0X_DeviceModes device_mode, FixPoint1616_t *p_threshold_low,
+ FixPoint1616_t *p_threshold_high)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint16_t Threshold16;
- LOG_FUNCTION_START("");
-
- /* no dependency on DeviceMode for Ewok */
-
- Status = VL53L0X_RdWord(Dev, VL53L0X_REG_SYSTEM_THRESH_LOW, &Threshold16);
- /* Need to multiply by 2 because the FW will apply a x2 */
- *pThresholdLow = (FixPoint1616_t)((0x00fff & Threshold16) << 17);
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdWord(Dev, VL53L0X_REG_SYSTEM_THRESH_HIGH,
- &Threshold16);
- /* Need to multiply by 2 because the FW will apply a x2 */
- *pThresholdHigh =
- (FixPoint1616_t)((0x00fff & Threshold16) << 17);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint16_t threshold16;
+ LOG_FUNCTION_START("");
+
+ /* no dependency on DeviceMode for Ewok */
+
+ status = vl53l0x_read_word(dev, VL53L0X_REG_SYSTEM_THRESH_LOW, &threshold16);
+ /* Need to multiply by 2 because the FW will apply a x2 */
+ *p_threshold_low = (FixPoint1616_t)((0x00fff & threshold16) << 17);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_word(dev, VL53L0X_REG_SYSTEM_THRESH_HIGH,
+ &threshold16);
+ /* Need to multiply by 2 because the FW will apply a x2 */
+ *p_threshold_high =
+ (FixPoint1616_t)((0x00fff & threshold16) << 17);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_load_tuning_settings(VL53L0X_DEV Dev,
- uint8_t *pTuningSettingBuffer)
+VL53L0X_Error VL53L0X::vl53l0x_load_tuning_settings(VL53L0X_DEV dev,
+ uint8_t *p_tuning_setting_buffer)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- int i;
- int Index;
- uint8_t msb;
- uint8_t lsb;
- uint8_t SelectParam;
- uint8_t NumberOfWrites;
- uint8_t Address;
- uint8_t localBuffer[4]; /* max */
- uint16_t Temp16;
-
- LOG_FUNCTION_START("");
-
- Index = 0;
-
- while ((*(pTuningSettingBuffer + Index) != 0) &&
- (Status == VL53L0X_ERROR_NONE)) {
- NumberOfWrites = *(pTuningSettingBuffer + Index);
- Index++;
- if (NumberOfWrites == 0xFF) {
- /* internal parameters */
- SelectParam = *(pTuningSettingBuffer + Index);
- Index++;
- switch (SelectParam) {
- case 0: /* uint16_t SigmaEstRefArray -> 2 bytes */
- msb = *(pTuningSettingBuffer + Index);
- Index++;
- lsb = *(pTuningSettingBuffer + Index);
- Index++;
- Temp16 = VL53L0X_MAKEUINT16(lsb, msb);
- PALDevDataSet(Dev, SigmaEstRefArray, Temp16);
- break;
- case 1: /* uint16_t SigmaEstEffPulseWidth -> 2 bytes */
- msb = *(pTuningSettingBuffer + Index);
- Index++;
- lsb = *(pTuningSettingBuffer + Index);
- Index++;
- Temp16 = VL53L0X_MAKEUINT16(lsb, msb);
- PALDevDataSet(Dev, SigmaEstEffPulseWidth,
- Temp16);
- break;
- case 2: /* uint16_t SigmaEstEffAmbWidth -> 2 bytes */
- msb = *(pTuningSettingBuffer + Index);
- Index++;
- lsb = *(pTuningSettingBuffer + Index);
- Index++;
- Temp16 = VL53L0X_MAKEUINT16(lsb, msb);
- PALDevDataSet(Dev, SigmaEstEffAmbWidth, Temp16);
- break;
- case 3: /* uint16_t targetRefRate -> 2 bytes */
- msb = *(pTuningSettingBuffer + Index);
- Index++;
- lsb = *(pTuningSettingBuffer + Index);
- Index++;
- Temp16 = VL53L0X_MAKEUINT16(lsb, msb);
- PALDevDataSet(Dev, targetRefRate, Temp16);
- break;
- default: /* invalid parameter */
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
-
- } else if (NumberOfWrites <= 4) {
- Address = *(pTuningSettingBuffer + Index);
- Index++;
-
- for (i = 0; i < NumberOfWrites; i++) {
- localBuffer[i] = *(pTuningSettingBuffer +
- Index);
- Index++;
- }
-
- Status = VL53L0X_WriteMulti(Dev, Address, localBuffer,
- NumberOfWrites);
-
- } else {
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ int i;
+ int index;
+ uint8_t msb;
+ uint8_t lsb;
+ uint8_t select_param;
+ uint8_t number_of_writes;
+ uint8_t address;
+ uint8_t local_buffer[4]; /* max */
+ uint16_t temp16;
+
+ LOG_FUNCTION_START("");
+
+ index = 0;
+
+ while ((*(p_tuning_setting_buffer + index) != 0) &&
+ (status == VL53L0X_ERROR_NONE)) {
+ number_of_writes = *(p_tuning_setting_buffer + index);
+ index++;
+ if (number_of_writes == 0xFF) {
+ /* internal parameters */
+ select_param = *(p_tuning_setting_buffer + index);
+ index++;
+ switch (select_param) {
+ case 0: /* uint16_t SigmaEstRefArray -> 2 bytes */
+ msb = *(p_tuning_setting_buffer + index);
+ index++;
+ lsb = *(p_tuning_setting_buffer + index);
+ index++;
+ temp16 = VL53L0X_MAKEUINT16(lsb, msb);
+ PALDevDataSet(dev, SigmaEstRefArray, temp16);
+ break;
+ case 1: /* uint16_t SigmaEstEffPulseWidth -> 2 bytes */
+ msb = *(p_tuning_setting_buffer + index);
+ index++;
+ lsb = *(p_tuning_setting_buffer + index);
+ index++;
+ temp16 = VL53L0X_MAKEUINT16(lsb, msb);
+ PALDevDataSet(dev, SigmaEstEffPulseWidth,
+ temp16);
+ break;
+ case 2: /* uint16_t SigmaEstEffAmbWidth -> 2 bytes */
+ msb = *(p_tuning_setting_buffer + index);
+ index++;
+ lsb = *(p_tuning_setting_buffer + index);
+ index++;
+ temp16 = VL53L0X_MAKEUINT16(lsb, msb);
+ PALDevDataSet(dev, SigmaEstEffAmbWidth, temp16);
+ break;
+ case 3: /* uint16_t targetRefRate -> 2 bytes */
+ msb = *(p_tuning_setting_buffer + index);
+ index++;
+ lsb = *(p_tuning_setting_buffer + index);
+ index++;
+ temp16 = VL53L0X_MAKEUINT16(lsb, msb);
+ PALDevDataSet(dev, targetRefRate, temp16);
+ break;
+ default: /* invalid parameter */
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+
+ } else if (number_of_writes <= 4) {
+ address = *(p_tuning_setting_buffer + index);
+ index++;
+
+ for (i = 0; i < number_of_writes; i++) {
+ local_buffer[i] = *(p_tuning_setting_buffer +
+ index);
+ index++;
+ }
+
+ status = vl53l0x_write_multi(dev, address, local_buffer,
+ number_of_writes);
+
+ } else {
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_CheckAndLoadInterruptSettings(VL53L0X_DEV Dev,
- uint8_t StartNotStopFlag)
+VL53L0X_Error VL53L0X::vl53l0x_check_and_load_interrupt_settings(VL53L0X_DEV dev,
+ uint8_t start_not_stopflag)
{
- uint8_t InterruptConfig;
- FixPoint1616_t ThresholdLow;
- FixPoint1616_t ThresholdHigh;
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
-
- InterruptConfig = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- Pin0GpioFunctionality);
-
- if ((InterruptConfig ==
- VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW) ||
- (InterruptConfig ==
- VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH) ||
- (InterruptConfig ==
- VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT)) {
-
- Status = VL53L0X_GetInterruptThresholds(Dev,
- VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
- &ThresholdLow, &ThresholdHigh);
-
- if (((ThresholdLow > 255*65536) ||
- (ThresholdHigh > 255*65536)) &&
- (Status == VL53L0X_ERROR_NONE)) {
-
- if (StartNotStopFlag != 0) {
- Status = VL53L0X_load_tuning_settings(Dev,
- InterruptThresholdSettings);
- } else {
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x04);
- Status |= VL53L0X_WrByte(Dev, 0x70, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x00);
- }
-
- }
-
-
- }
-
- return Status;
+ uint8_t interrupt_config;
+ FixPoint1616_t threshold_low;
+ FixPoint1616_t threshold_high;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+
+ interrupt_config = VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ Pin0GpioFunctionality);
+
+ if ((interrupt_config ==
+ VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW) ||
+ (interrupt_config ==
+ VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH) ||
+ (interrupt_config ==
+ VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT)) {
+
+ status = vl53l0x_get_interrupt_thresholds(dev,
+ VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
+ &threshold_low, &threshold_high);
+
+ if (((threshold_low > 255 * 65536) ||
+ (threshold_high > 255 * 65536)) &&
+ (status == VL53L0X_ERROR_NONE)) {
+
+ if (start_not_stopflag != 0) {
+ status = vl53l0x_load_tuning_settings(dev,
+ InterruptThresholdSettings);
+ } else {
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x04);
+ status |= vl53l0x_write_byte(dev, 0x70, 0x00);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x00);
+ status |= vl53l0x_write_byte(dev, 0x80, 0x00);
+ }
+
+ }
+
+
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_StartMeasurement(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_start_measurement(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- VL53L0X_DeviceModes DeviceMode;
- uint8_t Byte;
- uint8_t StartStopByte = VL53L0X_REG_SYSRANGE_MODE_START_STOP;
- uint32_t LoopNb;
- LOG_FUNCTION_START("");
-
- /* Get Current DeviceMode */
- VL53L0X_GetDeviceMode(Dev, &DeviceMode);
-
- Status = VL53L0X_WrByte(Dev, 0x80, 0x01);
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status = VL53L0X_WrByte(Dev, 0x00, 0x00);
- Status = VL53L0X_WrByte(Dev, 0x91, PALDevDataGet(Dev, StopVariable));
- Status = VL53L0X_WrByte(Dev, 0x00, 0x01);
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
- Status = VL53L0X_WrByte(Dev, 0x80, 0x00);
-
- switch (DeviceMode) {
- case VL53L0X_DEVICEMODE_SINGLE_RANGING:
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSRANGE_START, 0x01);
-
- Byte = StartStopByte;
- if (Status == VL53L0X_ERROR_NONE) {
- /* Wait until start bit has been cleared */
- LoopNb = 0;
- do {
- if (LoopNb > 0)
- Status = VL53L0X_RdByte(Dev,
- VL53L0X_REG_SYSRANGE_START, &Byte);
- LoopNb = LoopNb + 1;
- } while (((Byte & StartStopByte) == StartStopByte)
- && (Status == VL53L0X_ERROR_NONE)
- && (LoopNb < VL53L0X_DEFAULT_MAX_LOOP));
-
- if (LoopNb >= VL53L0X_DEFAULT_MAX_LOOP)
- Status = VL53L0X_ERROR_TIME_OUT;
-
- }
-
- break;
- case VL53L0X_DEVICEMODE_CONTINUOUS_RANGING:
- /* Back-to-back mode */
-
- /* Check if need to apply interrupt settings */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_CheckAndLoadInterruptSettings(Dev, 1);
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSRANGE_START,
- VL53L0X_REG_SYSRANGE_MODE_BACKTOBACK);
- if (Status == VL53L0X_ERROR_NONE) {
- /* Set PAL State to Running */
- PALDevDataSet(Dev, PalState, VL53L0X_STATE_RUNNING);
- }
- break;
- case VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING:
- /* Continuous mode */
- /* Check if need to apply interrupt settings */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_CheckAndLoadInterruptSettings(Dev, 1);
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSRANGE_START,
- VL53L0X_REG_SYSRANGE_MODE_TIMED);
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* Set PAL State to Running */
- PALDevDataSet(Dev, PalState, VL53L0X_STATE_RUNNING);
- }
- break;
- default:
- /* Selected mode not supported */
- Status = VL53L0X_ERROR_MODE_NOT_SUPPORTED;
- }
-
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ VL53L0X_DeviceModes device_mode;
+ uint8_t byte;
+ uint8_t start_stop_byte = VL53L0X_REG_SYSRANGE_MODE_START_STOP;
+ uint32_t loop_nb;
+ LOG_FUNCTION_START("");
+
+ /* Get Current DeviceMode */
+ vl53l0x_get_device_mode(dev, &device_mode);
+
+ status = vl53l0x_write_byte(dev, 0x80, 0x01);
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status = vl53l0x_write_byte(dev, 0x00, 0x00);
+ status = vl53l0x_write_byte(dev, 0x91, PALDevDataGet(dev, StopVariable));
+ status = vl53l0x_write_byte(dev, 0x00, 0x01);
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+ status = vl53l0x_write_byte(dev, 0x80, 0x00);
+
+ switch (device_mode) {
+ case VL53L0X_DEVICEMODE_SINGLE_RANGING:
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSRANGE_START, 0x01);
+
+ byte = start_stop_byte;
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Wait until start bit has been cleared */
+ loop_nb = 0;
+ do {
+ if (loop_nb > 0)
+ status = vl53l0x_read_byte(dev,
+ VL53L0X_REG_SYSRANGE_START, &byte);
+ loop_nb = loop_nb + 1;
+ } while (((byte & start_stop_byte) == start_stop_byte)
+ && (status == VL53L0X_ERROR_NONE)
+ && (loop_nb < VL53L0X_DEFAULT_MAX_LOOP));
+
+ if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP)
+ status = VL53L0X_ERROR_TIME_OUT;
+
+ }
+
+ break;
+ case VL53L0X_DEVICEMODE_CONTINUOUS_RANGING:
+ /* Back-to-back mode */
+
+ /* Check if need to apply interrupt settings */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_check_and_load_interrupt_settings(dev, 1);
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSRANGE_START,
+ VL53L0X_REG_SYSRANGE_MODE_BACKTOBACK);
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Set PAL State to Running */
+ PALDevDataSet(dev, PalState, VL53L0X_STATE_RUNNING);
+ }
+ break;
+ case VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING:
+ /* Continuous mode */
+ /* Check if need to apply interrupt settings */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_check_and_load_interrupt_settings(dev, 1);
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSRANGE_START,
+ VL53L0X_REG_SYSRANGE_MODE_TIMED);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Set PAL State to Running */
+ PALDevDataSet(dev, PalState, VL53L0X_STATE_RUNNING);
+ }
+ break;
+ default:
+ /* Selected mode not supported */
+ status = VL53L0X_ERROR_MODE_NOT_SUPPORTED;
+ }
+
+
+ LOG_FUNCTION_END(status);
+ return status;
}
/* Group PAL Measurement Functions */
-VL53L0X_Error VL53L0X::VL53L0X_PerformSingleMeasurement(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_perform_single_measurement(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- VL53L0X_DeviceModes DeviceMode;
-
- LOG_FUNCTION_START("");
-
- /* Get Current DeviceMode */
- Status = VL53L0X_GetDeviceMode(Dev, &DeviceMode);
-
- /* Start immediately to run a single ranging measurement in case of
- * single ranging or single histogram */
- if (Status == VL53L0X_ERROR_NONE
- && DeviceMode == VL53L0X_DEVICEMODE_SINGLE_RANGING)
- Status = VL53L0X_StartMeasurement(Dev);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_measurement_poll_for_completion(Dev);
-
-
- /* Change PAL State in case of single ranging or single histogram */
- if (Status == VL53L0X_ERROR_NONE
- && DeviceMode == VL53L0X_DEVICEMODE_SINGLE_RANGING)
- PALDevDataSet(Dev, PalState, VL53L0X_STATE_IDLE);
-
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ VL53L0X_DeviceModes device_mode;
+
+ LOG_FUNCTION_START("");
+
+ /* Get Current DeviceMode */
+ status = vl53l0x_get_device_mode(dev, &device_mode);
+
+ /* Start immediately to run a single ranging measurement in case of
+ * single ranging or single histogram */
+ if (status == VL53L0X_ERROR_NONE
+ && device_mode == VL53L0X_DEVICEMODE_SINGLE_RANGING)
+ status = vl53l0x_start_measurement(dev);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_measurement_poll_for_completion(dev);
+
+
+ /* Change PAL State in case of single ranging or single histogram */
+ if (status == VL53L0X_ERROR_NONE
+ && device_mode == VL53L0X_DEVICEMODE_SINGLE_RANGING)
+ PALDevDataSet(dev, PalState, VL53L0X_STATE_IDLE);
+
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetXTalkCompensationEnable(VL53L0X_DEV Dev,
- uint8_t *pXTalkCompensationEnable)
+VL53L0X_Error VL53L0X::vl53l0x_get_x_talk_compensation_enable(VL53L0X_DEV dev,
+ uint8_t *p_x_talk_compensation_enable)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t Temp8;
- LOG_FUNCTION_START("");
-
- VL53L0X_GETPARAMETERFIELD(Dev, XTalkCompensationEnable, Temp8);
- *pXTalkCompensationEnable = Temp8;
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t temp8;
+ LOG_FUNCTION_START("");
+
+ VL53L0X_GETPARAMETERFIELD(dev, XTalkCompensationEnable, temp8);
+ *p_x_talk_compensation_enable = temp8;
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_total_xtalk_rate(VL53L0X_DEV Dev,
- VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
- FixPoint1616_t *ptotal_xtalk_rate_mcps)
+VL53L0X_Error VL53L0X::vl53l0x_get_total_xtalk_rate(VL53L0X_DEV dev,
+ VL53L0X_RangingMeasurementData_t *p_ranging_measurement_data,
+ FixPoint1616_t *p_total_xtalk_rate_mcps)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
-
- uint8_t xtalkCompEnable;
- FixPoint1616_t totalXtalkMegaCps;
- FixPoint1616_t xtalkPerSpadMegaCps;
-
- *ptotal_xtalk_rate_mcps = 0;
-
- Status = VL53L0X_GetXTalkCompensationEnable(Dev, &xtalkCompEnable);
- if (Status == VL53L0X_ERROR_NONE) {
-
- if (xtalkCompEnable) {
-
- VL53L0X_GETPARAMETERFIELD(
- Dev,
- XTalkCompensationRateMegaCps,
- xtalkPerSpadMegaCps);
-
- /* FixPoint1616 * FixPoint 8:8 = FixPoint0824 */
- totalXtalkMegaCps =
- pRangingMeasurementData->EffectiveSpadRtnCount *
- xtalkPerSpadMegaCps;
-
- /* FixPoint0824 >> 8 = FixPoint1616 */
- *ptotal_xtalk_rate_mcps =
- (totalXtalkMegaCps + 0x80) >> 8;
- }
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+
+ uint8_t xtalk_comp_enable;
+ FixPoint1616_t total_xtalk_mega_cps;
+ FixPoint1616_t xtalk_per_spad_mega_cps;
+
+ *p_total_xtalk_rate_mcps = 0;
+
+ status = vl53l0x_get_x_talk_compensation_enable(dev, &xtalk_comp_enable);
+ if (status == VL53L0X_ERROR_NONE) {
+
+ if (xtalk_comp_enable) {
+
+ VL53L0X_GETPARAMETERFIELD(
+ dev,
+ XTalkCompensationRateMegaCps,
+ xtalk_per_spad_mega_cps);
+
+ /* FixPoint1616 * FixPoint 8:8 = FixPoint0824 */
+ total_xtalk_mega_cps =
+ p_ranging_measurement_data->EffectiveSpadRtnCount *
+ xtalk_per_spad_mega_cps;
+
+ /* FixPoint0824 >> 8 = FixPoint1616 */
+ *p_total_xtalk_rate_mcps =
+ (total_xtalk_mega_cps + 0x80) >> 8;
+ }
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_total_signal_rate(VL53L0X_DEV Dev,
- VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
- FixPoint1616_t *ptotal_signal_rate_mcps)
+VL53L0X_Error VL53L0X::vl53l0x_get_total_signal_rate(VL53L0X_DEV dev,
+ VL53L0X_RangingMeasurementData_t *p_ranging_measurement_data,
+ FixPoint1616_t *p_total_signal_rate_mcps)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- FixPoint1616_t totalXtalkMegaCps;
-
- LOG_FUNCTION_START("");
-
- *ptotal_signal_rate_mcps =
- pRangingMeasurementData->SignalRateRtnMegaCps;
-
- Status = VL53L0X_get_total_xtalk_rate(
- Dev, pRangingMeasurementData, &totalXtalkMegaCps);
-
- if (Status == VL53L0X_ERROR_NONE)
- *ptotal_signal_rate_mcps += totalXtalkMegaCps;
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ FixPoint1616_t total_xtalk_mega_cps;
+
+ LOG_FUNCTION_START("");
+
+ *p_total_signal_rate_mcps =
+ p_ranging_measurement_data->SignalRateRtnMegaCps;
+
+ status = vl53l0x_get_total_xtalk_rate(
+ dev, p_ranging_measurement_data, &total_xtalk_mega_cps);
+
+ if (status == VL53L0X_ERROR_NONE)
+ *p_total_signal_rate_mcps += total_xtalk_mega_cps;
+
+ return status;
}
/* To convert ms into register value */
-uint32_t VL53L0X::VL53L0X_calc_timeout_mclks(VL53L0X_DEV Dev,
- uint32_t timeout_period_us,
- uint8_t vcsel_period_pclks)
+uint32_t VL53L0X::vl53l0x_calc_timeout_mclks(VL53L0X_DEV dev,
+ uint32_t timeout_period_us,
+ uint8_t vcsel_period_pclks)
{
- uint32_t macro_period_ps;
- uint32_t macro_period_ns;
- uint32_t timeout_period_mclks = 0;
-
- macro_period_ps = VL53L0X_calc_macro_period_ps(Dev, vcsel_period_pclks);
- macro_period_ns = (macro_period_ps + 500) / 1000;
-
- timeout_period_mclks =
- (uint32_t) (((timeout_period_us * 1000)
- + (macro_period_ns / 2)) / macro_period_ns);
+ uint32_t macro_period_ps;
+ uint32_t macro_period_ns;
+ uint32_t timeout_period_mclks = 0;
+
+ macro_period_ps = vl53l0x_calc_macro_period_ps(dev, vcsel_period_pclks);
+ macro_period_ns = (macro_period_ps + 500) / 1000;
+
+ timeout_period_mclks =
+ (uint32_t)(((timeout_period_us * 1000)
+ + (macro_period_ns / 2)) / macro_period_ns);
return timeout_period_mclks;
}
-uint32_t VL53L0X::VL53L0X_isqrt(uint32_t num)
+uint32_t VL53L0X::vl53l0x_isqrt(uint32_t num)
{
- /*
- * Implements an integer square root
- *
- * From: http://en.wikipedia.org/wiki/Methods_of_computing_square_roots
- */
-
- uint32_t res = 0;
- uint32_t bit = 1 << 30;
- /* The second-to-top bit is set:
- * 1 << 14 for 16-bits, 1 << 30 for 32 bits */
-
- /* "bit" starts at the highest power of four <= the argument. */
- while (bit > num)
- bit >>= 2;
-
-
- while (bit != 0) {
- if (num >= res + bit) {
- num -= res + bit;
- res = (res >> 1) + bit;
- } else
- res >>= 1;
-
- bit >>= 2;
- }
-
- return res;
+ /*
+ * Implements an integer square root
+ *
+ * From: http://en.wikipedia.org/wiki/Methods_of_computing_square_roots
+ */
+
+ uint32_t res = 0;
+ uint32_t bit = 1 << 30;
+ /* The second-to-top bit is set:
+ * 1 << 14 for 16-bits, 1 << 30 for 32 bits */
+
+ /* "bit" starts at the highest power of four <= the argument. */
+ while (bit > num)
+ bit >>= 2;
+
+
+ while (bit != 0) {
+ if (num >= res + bit) {
+ num -= res + bit;
+ res = (res >> 1) + bit;
+ } else
+ res >>= 1;
+
+ bit >>= 2;
+ }
+
+ return res;
}
-VL53L0X_Error VL53L0X::VL53L0X_calc_dmax(
- VL53L0X_DEV Dev,
- FixPoint1616_t totalSignalRate_mcps,
- FixPoint1616_t totalCorrSignalRate_mcps,
- FixPoint1616_t pwMult,
- uint32_t sigmaEstimateP1,
- FixPoint1616_t sigmaEstimateP2,
- uint32_t peakVcselDuration_us,
- uint32_t *pdmax_mm)
+VL53L0X_Error VL53L0X::vl53l0x_calc_dmax(
+ VL53L0X_DEV dev,
+ FixPoint1616_t total_signal_rate_mcps,
+ FixPoint1616_t total_corr_signal_rate_mcps,
+ FixPoint1616_t pw_mult,
+ uint32_t sigma_estimate_p1,
+ FixPoint1616_t sigma_estimate_p2,
+ uint32_t peak_vcsel_duration_us,
+ uint32_t *pd_max_mm)
{
- const uint32_t cSigmaLimit = 18;
- const FixPoint1616_t cSignalLimit = 0x4000; /* 0.25 */
- const FixPoint1616_t cSigmaEstRef = 0x00000042; /* 0.001 */
- const uint32_t cAmbEffWidthSigmaEst_ns = 6;
- const uint32_t cAmbEffWidthDMax_ns = 7;
- uint32_t dmaxCalRange_mm;
- FixPoint1616_t dmaxCalSignalRateRtn_mcps;
- FixPoint1616_t minSignalNeeded;
- FixPoint1616_t minSignalNeeded_p1;
- FixPoint1616_t minSignalNeeded_p2;
- FixPoint1616_t minSignalNeeded_p3;
- FixPoint1616_t minSignalNeeded_p4;
- FixPoint1616_t sigmaLimitTmp;
- FixPoint1616_t sigmaEstSqTmp;
- FixPoint1616_t signalLimitTmp;
- FixPoint1616_t SignalAt0mm;
- FixPoint1616_t dmaxDark;
- FixPoint1616_t dmaxAmbient;
- FixPoint1616_t dmaxDarkTmp;
- FixPoint1616_t sigmaEstP2Tmp;
- uint32_t signalRateTemp_mcps;
-
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
-
- LOG_FUNCTION_START("");
-
- dmaxCalRange_mm =
- PALDevDataGet(Dev, DmaxCalRangeMilliMeter);
-
- dmaxCalSignalRateRtn_mcps =
- PALDevDataGet(Dev, DmaxCalSignalRateRtnMegaCps);
-
- /* uint32 * FixPoint1616 = FixPoint1616 */
- SignalAt0mm = dmaxCalRange_mm * dmaxCalSignalRateRtn_mcps;
-
- /* FixPoint1616 >> 8 = FixPoint2408 */
- SignalAt0mm = (SignalAt0mm + 0x80) >> 8;
- SignalAt0mm *= dmaxCalRange_mm;
-
- minSignalNeeded_p1 = 0;
- if (totalCorrSignalRate_mcps > 0) {
-
- /* Shift by 10 bits to increase resolution prior to the
- * division */
- signalRateTemp_mcps = totalSignalRate_mcps << 10;
-
- /* Add rounding value prior to division */
- minSignalNeeded_p1 = signalRateTemp_mcps +
- (totalCorrSignalRate_mcps/2);
-
- /* FixPoint0626/FixPoint1616 = FixPoint2210 */
- minSignalNeeded_p1 /= totalCorrSignalRate_mcps;
-
- /* Apply a factored version of the speed of light.
- Correction to be applied at the end */
- minSignalNeeded_p1 *= 3;
-
- /* FixPoint2210 * FixPoint2210 = FixPoint1220 */
- minSignalNeeded_p1 *= minSignalNeeded_p1;
-
- /* FixPoint1220 >> 16 = FixPoint2804 */
- minSignalNeeded_p1 = (minSignalNeeded_p1 + 0x8000) >> 16;
- }
-
- minSignalNeeded_p2 = pwMult * sigmaEstimateP1;
-
- /* FixPoint1616 >> 16 = uint32 */
- minSignalNeeded_p2 = (minSignalNeeded_p2 + 0x8000) >> 16;
-
- /* uint32 * uint32 = uint32 */
- minSignalNeeded_p2 *= minSignalNeeded_p2;
-
- /* Check sigmaEstimateP2
- * If this value is too high there is not enough signal rate
- * to calculate dmax value so set a suitable value to ensure
- * a very small dmax.
- */
- sigmaEstP2Tmp = (sigmaEstimateP2 + 0x8000) >> 16;
- sigmaEstP2Tmp = (sigmaEstP2Tmp + cAmbEffWidthSigmaEst_ns/2)/
- cAmbEffWidthSigmaEst_ns;
- sigmaEstP2Tmp *= cAmbEffWidthDMax_ns;
-
- if (sigmaEstP2Tmp > 0xffff) {
- minSignalNeeded_p3 = 0xfff00000;
- } else {
-
- /* DMAX uses a different ambient width from sigma, so apply
- * correction.
- * Perform division before multiplication to prevent overflow.
- */
- sigmaEstimateP2 = (sigmaEstimateP2 + cAmbEffWidthSigmaEst_ns/2)/
- cAmbEffWidthSigmaEst_ns;
- sigmaEstimateP2 *= cAmbEffWidthDMax_ns;
-
- /* FixPoint1616 >> 16 = uint32 */
- minSignalNeeded_p3 = (sigmaEstimateP2 + 0x8000) >> 16;
-
- minSignalNeeded_p3 *= minSignalNeeded_p3;
-
- }
-
- /* FixPoint1814 / uint32 = FixPoint1814 */
- sigmaLimitTmp = ((cSigmaLimit << 14) + 500) / 1000;
-
- /* FixPoint1814 * FixPoint1814 = FixPoint3628 := FixPoint0428 */
- sigmaLimitTmp *= sigmaLimitTmp;
-
- /* FixPoint1616 * FixPoint1616 = FixPoint3232 */
- sigmaEstSqTmp = cSigmaEstRef * cSigmaEstRef;
-
- /* FixPoint3232 >> 4 = FixPoint0428 */
- sigmaEstSqTmp = (sigmaEstSqTmp + 0x08) >> 4;
-
- /* FixPoint0428 - FixPoint0428 = FixPoint0428 */
- sigmaLimitTmp -= sigmaEstSqTmp;
-
- /* uint32_t * FixPoint0428 = FixPoint0428 */
- minSignalNeeded_p4 = 4 * 12 * sigmaLimitTmp;
-
- /* FixPoint0428 >> 14 = FixPoint1814 */
- minSignalNeeded_p4 = (minSignalNeeded_p4 + 0x2000) >> 14;
-
- /* uint32 + uint32 = uint32 */
- minSignalNeeded = (minSignalNeeded_p2 + minSignalNeeded_p3);
-
- /* uint32 / uint32 = uint32 */
- minSignalNeeded += (peakVcselDuration_us/2);
- minSignalNeeded /= peakVcselDuration_us;
-
- /* uint32 << 14 = FixPoint1814 */
- minSignalNeeded <<= 14;
-
- /* FixPoint1814 / FixPoint1814 = uint32 */
- minSignalNeeded += (minSignalNeeded_p4/2);
- minSignalNeeded /= minSignalNeeded_p4;
-
- /* FixPoint3200 * FixPoint2804 := FixPoint2804*/
- minSignalNeeded *= minSignalNeeded_p1;
-
- /* Apply correction by dividing by 1000000.
- * This assumes 10E16 on the numerator of the equation
- * and 10E-22 on the denominator.
- * We do this because 32bit fix point calculation can't
- * handle the larger and smaller elements of this equation,
- * i.e. speed of light and pulse widths.
- */
- minSignalNeeded = (minSignalNeeded + 500) / 1000;
- minSignalNeeded <<= 4;
-
- minSignalNeeded = (minSignalNeeded + 500) / 1000;
-
- /* FixPoint1616 >> 8 = FixPoint2408 */
- signalLimitTmp = (cSignalLimit + 0x80) >> 8;
-
- /* FixPoint2408/FixPoint2408 = uint32 */
- if (signalLimitTmp != 0)
- dmaxDarkTmp = (SignalAt0mm + (signalLimitTmp / 2))
- / signalLimitTmp;
- else
- dmaxDarkTmp = 0;
-
- dmaxDark = VL53L0X_isqrt(dmaxDarkTmp);
-
- /* FixPoint2408/FixPoint2408 = uint32 */
- if (minSignalNeeded != 0)
- dmaxAmbient = (SignalAt0mm + minSignalNeeded/2)
- / minSignalNeeded;
- else
- dmaxAmbient = 0;
-
- dmaxAmbient = VL53L0X_isqrt(dmaxAmbient);
-
- *pdmax_mm = dmaxDark;
- if (dmaxDark > dmaxAmbient)
- *pdmax_mm = dmaxAmbient;
-
- LOG_FUNCTION_END(Status);
-
- return Status;
+ const uint32_t c_sigma_limit = 18;
+ const FixPoint1616_t c_signal_limit = 0x4000; /* 0.25 */
+ const FixPoint1616_t c_sigma_est_ref = 0x00000042; /* 0.001 */
+ const uint32_t c_amb_eff_width_sigma_est_ns = 6;
+ const uint32_t c_amb_eff_width_d_max_ns = 7;
+ uint32_t dmax_cal_range_mm;
+ FixPoint1616_t dmax_cal_signal_rate_rtn_mcps;
+ FixPoint1616_t min_signal_needed;
+ FixPoint1616_t min_signal_needed_p1;
+ FixPoint1616_t min_signal_needed_p2;
+ FixPoint1616_t min_signal_needed_p3;
+ FixPoint1616_t min_signal_needed_p4;
+ FixPoint1616_t sigma_limit_tmp;
+ FixPoint1616_t sigma_est_sq_tmp;
+ FixPoint1616_t signal_limit_tmp;
+ FixPoint1616_t signal_at0_mm;
+ FixPoint1616_t dmax_dark;
+ FixPoint1616_t dmax_ambient;
+ FixPoint1616_t dmax_dark_tmp;
+ FixPoint1616_t sigma_est_p2_tmp;
+ uint32_t signal_rate_temp_mcps;
+
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+
+ LOG_FUNCTION_START("");
+
+ dmax_cal_range_mm =
+ PALDevDataGet(dev, DmaxCalRangeMilliMeter);
+
+ dmax_cal_signal_rate_rtn_mcps =
+ PALDevDataGet(dev, DmaxCalSignalRateRtnMegaCps);
+
+ /* uint32 * FixPoint1616 = FixPoint1616 */
+ signal_at0_mm = dmax_cal_range_mm * dmax_cal_signal_rate_rtn_mcps;
+
+ /* FixPoint1616 >> 8 = FixPoint2408 */
+ signal_at0_mm = (signal_at0_mm + 0x80) >> 8;
+ signal_at0_mm *= dmax_cal_range_mm;
+
+ min_signal_needed_p1 = 0;
+ if (total_corr_signal_rate_mcps > 0) {
+
+ /* Shift by 10 bits to increase resolution prior to the
+ * division */
+ signal_rate_temp_mcps = total_signal_rate_mcps << 10;
+
+ /* Add rounding value prior to division */
+ min_signal_needed_p1 = signal_rate_temp_mcps +
+ (total_corr_signal_rate_mcps / 2);
+
+ /* FixPoint0626/FixPoint1616 = FixPoint2210 */
+ min_signal_needed_p1 /= total_corr_signal_rate_mcps;
+
+ /* Apply a factored version of the speed of light.
+ Correction to be applied at the end */
+ min_signal_needed_p1 *= 3;
+
+ /* FixPoint2210 * FixPoint2210 = FixPoint1220 */
+ min_signal_needed_p1 *= min_signal_needed_p1;
+
+ /* FixPoint1220 >> 16 = FixPoint2804 */
+ min_signal_needed_p1 = (min_signal_needed_p1 + 0x8000) >> 16;
+ }
+
+ min_signal_needed_p2 = pw_mult * sigma_estimate_p1;
+
+ /* FixPoint1616 >> 16 = uint32 */
+ min_signal_needed_p2 = (min_signal_needed_p2 + 0x8000) >> 16;
+
+ /* uint32 * uint32 = uint32 */
+ min_signal_needed_p2 *= min_signal_needed_p2;
+
+ /* Check sigmaEstimateP2
+ * If this value is too high there is not enough signal rate
+ * to calculate dmax value so set a suitable value to ensure
+ * a very small dmax.
+ */
+ sigma_est_p2_tmp = (sigma_estimate_p2 + 0x8000) >> 16;
+ sigma_est_p2_tmp = (sigma_est_p2_tmp + c_amb_eff_width_sigma_est_ns / 2) /
+ c_amb_eff_width_sigma_est_ns;
+ sigma_est_p2_tmp *= c_amb_eff_width_d_max_ns;
+
+ if (sigma_est_p2_tmp > 0xffff) {
+ min_signal_needed_p3 = 0xfff00000;
+ } else {
+
+ /* DMAX uses a different ambient width from sigma, so apply
+ * correction.
+ * Perform division before multiplication to prevent overflow.
+ */
+ sigma_estimate_p2 = (sigma_estimate_p2 + c_amb_eff_width_sigma_est_ns / 2) /
+ c_amb_eff_width_sigma_est_ns;
+ sigma_estimate_p2 *= c_amb_eff_width_d_max_ns;
+
+ /* FixPoint1616 >> 16 = uint32 */
+ min_signal_needed_p3 = (sigma_estimate_p2 + 0x8000) >> 16;
+
+ min_signal_needed_p3 *= min_signal_needed_p3;
+
+ }
+
+ /* FixPoint1814 / uint32 = FixPoint1814 */
+ sigma_limit_tmp = ((c_sigma_limit << 14) + 500) / 1000;
+
+ /* FixPoint1814 * FixPoint1814 = FixPoint3628 := FixPoint0428 */
+ sigma_limit_tmp *= sigma_limit_tmp;
+
+ /* FixPoint1616 * FixPoint1616 = FixPoint3232 */
+ sigma_est_sq_tmp = c_sigma_est_ref * c_sigma_est_ref;
+
+ /* FixPoint3232 >> 4 = FixPoint0428 */
+ sigma_est_sq_tmp = (sigma_est_sq_tmp + 0x08) >> 4;
+
+ /* FixPoint0428 - FixPoint0428 = FixPoint0428 */
+ sigma_limit_tmp -= sigma_est_sq_tmp;
+
+ /* uint32_t * FixPoint0428 = FixPoint0428 */
+ min_signal_needed_p4 = 4 * 12 * sigma_limit_tmp;
+
+ /* FixPoint0428 >> 14 = FixPoint1814 */
+ min_signal_needed_p4 = (min_signal_needed_p4 + 0x2000) >> 14;
+
+ /* uint32 + uint32 = uint32 */
+ min_signal_needed = (min_signal_needed_p2 + min_signal_needed_p3);
+
+ /* uint32 / uint32 = uint32 */
+ min_signal_needed += (peak_vcsel_duration_us / 2);
+ min_signal_needed /= peak_vcsel_duration_us;
+
+ /* uint32 << 14 = FixPoint1814 */
+ min_signal_needed <<= 14;
+
+ /* FixPoint1814 / FixPoint1814 = uint32 */
+ min_signal_needed += (min_signal_needed_p4 / 2);
+ min_signal_needed /= min_signal_needed_p4;
+
+ /* FixPoint3200 * FixPoint2804 := FixPoint2804*/
+ min_signal_needed *= min_signal_needed_p1;
+
+ /* Apply correction by dividing by 1000000.
+ * This assumes 10E16 on the numerator of the equation
+ * and 10E-22 on the denominator.
+ * We do this because 32bit fix point calculation can't
+ * handle the larger and smaller elements of this equation,
+ * i.e. speed of light and pulse widths.
+ */
+ min_signal_needed = (min_signal_needed + 500) / 1000;
+ min_signal_needed <<= 4;
+
+ min_signal_needed = (min_signal_needed + 500) / 1000;
+
+ /* FixPoint1616 >> 8 = FixPoint2408 */
+ signal_limit_tmp = (c_signal_limit + 0x80) >> 8;
+
+ /* FixPoint2408/FixPoint2408 = uint32 */
+ if (signal_limit_tmp != 0)
+ dmax_dark_tmp = (signal_at0_mm + (signal_limit_tmp / 2))
+ / signal_limit_tmp;
+ else
+ dmax_dark_tmp = 0;
+
+ dmax_dark = vl53l0x_isqrt(dmax_dark_tmp);
+
+ /* FixPoint2408/FixPoint2408 = uint32 */
+ if (min_signal_needed != 0)
+ dmax_ambient = (signal_at0_mm + min_signal_needed / 2)
+ / min_signal_needed;
+ else
+ dmax_ambient = 0;
+
+ dmax_ambient = vl53l0x_isqrt(dmax_ambient);
+
+ *pd_max_mm = dmax_dark;
+ if (dmax_dark > dmax_ambient)
+ *pd_max_mm = dmax_ambient;
+
+ LOG_FUNCTION_END(status);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_calc_sigma_estimate(VL53L0X_DEV Dev,
- VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
- FixPoint1616_t *pSigmaEstimate,
- uint32_t *pDmax_mm)
+VL53L0X_Error VL53L0X::vl53l0x_calc_sigma_estimate(VL53L0X_DEV dev,
+ VL53L0X_RangingMeasurementData_t *p_ranging_measurement_data,
+ FixPoint1616_t *p_sigma_estimate,
+ uint32_t *p_dmax_mm)
{
- /* Expressed in 100ths of a ns, i.e. centi-ns */
- const uint32_t cPulseEffectiveWidth_centi_ns = 800;
- /* Expressed in 100ths of a ns, i.e. centi-ns */
- const uint32_t cAmbientEffectiveWidth_centi_ns = 600;
- const FixPoint1616_t cDfltFinalRangeIntegrationTimeMilliSecs = 0x00190000; /* 25ms */
- const uint32_t cVcselPulseWidth_ps = 4700; /* pico secs */
- const FixPoint1616_t cSigmaEstMax = 0x028F87AE;
- const FixPoint1616_t cSigmaEstRtnMax = 0xF000;
- const FixPoint1616_t cAmbToSignalRatioMax = 0xF0000000/
- cAmbientEffectiveWidth_centi_ns;
- /* Time Of Flight per mm (6.6 pico secs) */
- const FixPoint1616_t cTOF_per_mm_ps = 0x0006999A;
- const uint32_t c16BitRoundingParam = 0x00008000;
- const FixPoint1616_t cMaxXTalk_kcps = 0x00320000;
- const uint32_t cPllPeriod_ps = 1655;
-
- uint32_t vcselTotalEventsRtn;
- uint32_t finalRangeTimeoutMicroSecs;
- uint32_t preRangeTimeoutMicroSecs;
- uint32_t finalRangeIntegrationTimeMilliSecs;
- FixPoint1616_t sigmaEstimateP1;
- FixPoint1616_t sigmaEstimateP2;
- FixPoint1616_t sigmaEstimateP3;
- FixPoint1616_t deltaT_ps;
- FixPoint1616_t pwMult;
- FixPoint1616_t sigmaEstRtn;
- FixPoint1616_t sigmaEstimate;
- FixPoint1616_t xTalkCorrection;
- FixPoint1616_t ambientRate_kcps;
- FixPoint1616_t peakSignalRate_kcps;
- FixPoint1616_t xTalkCompRate_mcps;
- uint32_t xTalkCompRate_kcps;
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- FixPoint1616_t diff1_mcps;
- FixPoint1616_t diff2_mcps;
- FixPoint1616_t sqr1;
- FixPoint1616_t sqr2;
- FixPoint1616_t sqrSum;
- FixPoint1616_t sqrtResult_centi_ns;
- FixPoint1616_t sqrtResult;
- FixPoint1616_t totalSignalRate_mcps;
- FixPoint1616_t correctedSignalRate_mcps;
- FixPoint1616_t sigmaEstRef;
- uint32_t vcselWidth;
- uint32_t finalRangeMacroPCLKS;
- uint32_t preRangeMacroPCLKS;
- uint32_t peakVcselDuration_us;
- uint8_t finalRangeVcselPCLKS;
- uint8_t preRangeVcselPCLKS;
- /*! \addtogroup calc_sigma_estimate
- * @{
- *
- * Estimates the range sigma
- */
-
- LOG_FUNCTION_START("");
-
- VL53L0X_GETPARAMETERFIELD(Dev, XTalkCompensationRateMegaCps,
- xTalkCompRate_mcps);
-
- /*
- * We work in kcps rather than mcps as this helps keep within the
- * confines of the 32 Fix1616 type.
- */
-
- ambientRate_kcps =
- (pRangingMeasurementData->AmbientRateRtnMegaCps * 1000) >> 16;
-
- correctedSignalRate_mcps =
- pRangingMeasurementData->SignalRateRtnMegaCps;
-
-
- Status = VL53L0X_get_total_signal_rate(
- Dev, pRangingMeasurementData, &totalSignalRate_mcps);
- Status = VL53L0X_get_total_xtalk_rate(
- Dev, pRangingMeasurementData, &xTalkCompRate_mcps);
-
-
- /* Signal rate measurement provided by device is the
- * peak signal rate, not average.
- */
- peakSignalRate_kcps = (totalSignalRate_mcps * 1000);
- peakSignalRate_kcps = (peakSignalRate_kcps + 0x8000) >> 16;
-
- xTalkCompRate_kcps = xTalkCompRate_mcps * 1000;
-
- if (xTalkCompRate_kcps > cMaxXTalk_kcps)
- xTalkCompRate_kcps = cMaxXTalk_kcps;
-
- if (Status == VL53L0X_ERROR_NONE) {
-
- /* Calculate final range macro periods */
- finalRangeTimeoutMicroSecs = VL53L0X_GETDEVICESPECIFICPARAMETER(
- Dev, FinalRangeTimeoutMicroSecs);
-
- finalRangeVcselPCLKS = VL53L0X_GETDEVICESPECIFICPARAMETER(
- Dev, FinalRangeVcselPulsePeriod);
-
- finalRangeMacroPCLKS = VL53L0X_calc_timeout_mclks(
- Dev, finalRangeTimeoutMicroSecs, finalRangeVcselPCLKS);
-
- /* Calculate pre-range macro periods */
- preRangeTimeoutMicroSecs = VL53L0X_GETDEVICESPECIFICPARAMETER(
- Dev, PreRangeTimeoutMicroSecs);
-
- preRangeVcselPCLKS = VL53L0X_GETDEVICESPECIFICPARAMETER(
- Dev, PreRangeVcselPulsePeriod);
-
- preRangeMacroPCLKS = VL53L0X_calc_timeout_mclks(
- Dev, preRangeTimeoutMicroSecs, preRangeVcselPCLKS);
-
- vcselWidth = 3;
- if (finalRangeVcselPCLKS == 8)
- vcselWidth = 2;
-
-
- peakVcselDuration_us = vcselWidth * 2048 *
- (preRangeMacroPCLKS + finalRangeMacroPCLKS);
- peakVcselDuration_us = (peakVcselDuration_us + 500)/1000;
- peakVcselDuration_us *= cPllPeriod_ps;
- peakVcselDuration_us = (peakVcselDuration_us + 500)/1000;
-
- /* Fix1616 >> 8 = Fix2408 */
- totalSignalRate_mcps = (totalSignalRate_mcps + 0x80) >> 8;
-
- /* Fix2408 * uint32 = Fix2408 */
- vcselTotalEventsRtn = totalSignalRate_mcps *
- peakVcselDuration_us;
-
- /* Fix2408 >> 8 = uint32 */
- vcselTotalEventsRtn = (vcselTotalEventsRtn + 0x80) >> 8;
-
- /* Fix2408 << 8 = Fix1616 = */
- totalSignalRate_mcps <<= 8;
- }
-
- if (Status != VL53L0X_ERROR_NONE) {
- LOG_FUNCTION_END(Status);
- return Status;
- }
-
- if (peakSignalRate_kcps == 0) {
- *pSigmaEstimate = cSigmaEstMax;
- PALDevDataSet(Dev, SigmaEstimate, cSigmaEstMax);
- *pDmax_mm = 0;
- } else {
- if (vcselTotalEventsRtn < 1)
- vcselTotalEventsRtn = 1;
-
- sigmaEstimateP1 = cPulseEffectiveWidth_centi_ns;
-
- /* ((FixPoint1616 << 16)* uint32)/uint32 = FixPoint1616 */
- sigmaEstimateP2 = (ambientRate_kcps << 16)/peakSignalRate_kcps;
- if (sigmaEstimateP2 > cAmbToSignalRatioMax) {
- /* Clip to prevent overflow. Will ensure safe
- * max result. */
- sigmaEstimateP2 = cAmbToSignalRatioMax;
- }
- sigmaEstimateP2 *= cAmbientEffectiveWidth_centi_ns;
-
- sigmaEstimateP3 = 2 * VL53L0X_isqrt(vcselTotalEventsRtn * 12);
-
- /* uint32 * FixPoint1616 = FixPoint1616 */
- deltaT_ps = pRangingMeasurementData->RangeMilliMeter *
- cTOF_per_mm_ps;
-
- /*
- * vcselRate - xtalkCompRate
- * (uint32 << 16) - FixPoint1616 = FixPoint1616.
- * Divide result by 1000 to convert to mcps.
- * 500 is added to ensure rounding when integer division
- * truncates.
- */
- diff1_mcps = (((peakSignalRate_kcps << 16) -
- 2 * xTalkCompRate_kcps) + 500)/1000;
-
- /* vcselRate + xtalkCompRate */
- diff2_mcps = ((peakSignalRate_kcps << 16) + 500)/1000;
-
- /* Shift by 8 bits to increase resolution prior to the
- * division */
- diff1_mcps <<= 8;
-
- /* FixPoint0824/FixPoint1616 = FixPoint2408 */
+ /* Expressed in 100ths of a ns, i.e. centi-ns */
+ const uint32_t c_pulse_effective_width_centi_ns = 800;
+ /* Expressed in 100ths of a ns, i.e. centi-ns */
+ const uint32_t c_ambient_effective_width_centi_ns = 600;
+ const FixPoint1616_t c_dflt_final_range_integration_time_milli_secs = 0x00190000; /* 25ms */
+ const uint32_t c_vcsel_pulse_width_ps = 4700; /* pico secs */
+ const FixPoint1616_t c_sigma_est_max = 0x028F87AE;
+ const FixPoint1616_t c_sigma_est_rtn_max = 0xF000;
+ const FixPoint1616_t c_amb_to_signal_ratio_max = 0xF0000000 /
+ c_ambient_effective_width_centi_ns;
+ /* Time Of Flight per mm (6.6 pico secs) */
+ const FixPoint1616_t c_tof_per_mm_ps = 0x0006999A;
+ const uint32_t c_16bit_rounding_param = 0x00008000;
+ const FixPoint1616_t c_max_x_talk_kcps = 0x00320000;
+ const uint32_t c_pll_period_ps = 1655;
+
+ uint32_t vcsel_total_events_rtn;
+ uint32_t final_range_timeout_micro_secs;
+ uint32_t pre_range_timeout_micro_secs;
+ uint32_t final_range_integration_time_milli_secs;
+ FixPoint1616_t sigma_estimate_p1;
+ FixPoint1616_t sigma_estimate_p2;
+ FixPoint1616_t sigma_estimate_p3;
+ FixPoint1616_t delta_t_ps;
+ FixPoint1616_t pw_mult;
+ FixPoint1616_t sigma_est_rtn;
+ FixPoint1616_t sigma_estimate;
+ FixPoint1616_t x_talk_correction;
+ FixPoint1616_t ambient_rate_kcps;
+ FixPoint1616_t peak_signal_rate_kcps;
+ FixPoint1616_t x_talk_comp_rate_mcps;
+ uint32_t x_talk_comp_rate_kcps;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ FixPoint1616_t diff1_mcps;
+ FixPoint1616_t diff2_mcps;
+ FixPoint1616_t sqr1;
+ FixPoint1616_t sqr2;
+ FixPoint1616_t sqr_sum;
+ FixPoint1616_t sqrt_result_centi_ns;
+ FixPoint1616_t sqrt_result;
+ FixPoint1616_t total_signal_rate_mcps;
+ FixPoint1616_t corrected_signal_rate_mcps;
+ FixPoint1616_t sigma_est_ref;
+ uint32_t vcsel_width;
+ uint32_t final_range_macro_pclks;
+ uint32_t pre_range_macro_pclks;
+ uint32_t peak_vcsel_duration_us;
+ uint8_t final_range_vcsel_pclks;
+ uint8_t pre_range_vcsel_pclks;
+ /*! \addtogroup calc_sigma_estimate
+ * @{
+ *
+ * Estimates the range sigma
+ */
+
+ LOG_FUNCTION_START("");
+
+ VL53L0X_GETPARAMETERFIELD(dev, XTalkCompensationRateMegaCps,
+ x_talk_comp_rate_mcps);
+
+ /*
+ * We work in kcps rather than mcps as this helps keep within the
+ * confines of the 32 Fix1616 type.
+ */
+
+ ambient_rate_kcps =
+ (p_ranging_measurement_data->AmbientRateRtnMegaCps * 1000) >> 16;
+
+ corrected_signal_rate_mcps =
+ p_ranging_measurement_data->SignalRateRtnMegaCps;
+
+
+ status = vl53l0x_get_total_signal_rate(
+ dev, p_ranging_measurement_data, &total_signal_rate_mcps);
+ status = vl53l0x_get_total_xtalk_rate(
+ dev, p_ranging_measurement_data, &x_talk_comp_rate_mcps);
+
+
+ /* Signal rate measurement provided by device is the
+ * peak signal rate, not average.
+ */
+ peak_signal_rate_kcps = (total_signal_rate_mcps * 1000);
+ peak_signal_rate_kcps = (peak_signal_rate_kcps + 0x8000) >> 16;
+
+ x_talk_comp_rate_kcps = x_talk_comp_rate_mcps * 1000;
+
+ if (x_talk_comp_rate_kcps > c_max_x_talk_kcps)
+ x_talk_comp_rate_kcps = c_max_x_talk_kcps;
+
+ if (status == VL53L0X_ERROR_NONE) {
+
+ /* Calculate final range macro periods */
+ final_range_timeout_micro_secs = VL53L0X_GETDEVICESPECIFICPARAMETER(
+ dev, FinalRangeTimeoutMicroSecs);
+
+ final_range_vcsel_pclks = VL53L0X_GETDEVICESPECIFICPARAMETER(
+ dev, FinalRangeVcselPulsePeriod);
+
+ final_range_macro_pclks = vl53l0x_calc_timeout_mclks(
+ dev, final_range_timeout_micro_secs, final_range_vcsel_pclks);
+
+ /* Calculate pre-range macro periods */
+ pre_range_timeout_micro_secs = VL53L0X_GETDEVICESPECIFICPARAMETER(
+ dev, PreRangeTimeoutMicroSecs);
+
+ pre_range_vcsel_pclks = VL53L0X_GETDEVICESPECIFICPARAMETER(
+ dev, PreRangeVcselPulsePeriod);
+
+ pre_range_macro_pclks = vl53l0x_calc_timeout_mclks(
+ dev, pre_range_timeout_micro_secs, pre_range_vcsel_pclks);
+
+ vcsel_width = 3;
+ if (final_range_vcsel_pclks == 8)
+ vcsel_width = 2;
+
+
+ peak_vcsel_duration_us = vcsel_width * 2048 *
+ (pre_range_macro_pclks + final_range_macro_pclks);
+ peak_vcsel_duration_us = (peak_vcsel_duration_us + 500) / 1000;
+ peak_vcsel_duration_us *= c_pll_period_ps;
+ peak_vcsel_duration_us = (peak_vcsel_duration_us + 500) / 1000;
+
+ /* Fix1616 >> 8 = Fix2408 */
+ total_signal_rate_mcps = (total_signal_rate_mcps + 0x80) >> 8;
+
+ /* Fix2408 * uint32 = Fix2408 */
+ vcsel_total_events_rtn = total_signal_rate_mcps *
+ peak_vcsel_duration_us;
+
+ /* Fix2408 >> 8 = uint32 */
+ vcsel_total_events_rtn = (vcsel_total_events_rtn + 0x80) >> 8;
+
+ /* Fix2408 << 8 = Fix1616 = */
+ total_signal_rate_mcps <<= 8;
+ }
+
+ if (status != VL53L0X_ERROR_NONE) {
+ LOG_FUNCTION_END(status);
+ return status;
+ }
+
+ if (peak_signal_rate_kcps == 0) {
+ *p_sigma_estimate = c_sigma_est_max;
+ PALDevDataSet(dev, SigmaEstimate, c_sigma_est_max);
+ *p_dmax_mm = 0;
+ } else {
+ if (vcsel_total_events_rtn < 1)
+ vcsel_total_events_rtn = 1;
+
+ sigma_estimate_p1 = c_pulse_effective_width_centi_ns;
+
+ /* ((FixPoint1616 << 16)* uint32)/uint32 = FixPoint1616 */
+ sigma_estimate_p2 = (ambient_rate_kcps << 16) / peak_signal_rate_kcps;
+ if (sigma_estimate_p2 > c_amb_to_signal_ratio_max) {
+ /* Clip to prevent overflow. Will ensure safe
+ * max result. */
+ sigma_estimate_p2 = c_amb_to_signal_ratio_max;
+ }
+ sigma_estimate_p2 *= c_ambient_effective_width_centi_ns;
+
+ sigma_estimate_p3 = 2 * vl53l0x_isqrt(vcsel_total_events_rtn * 12);
+
+ /* uint32 * FixPoint1616 = FixPoint1616 */
+ delta_t_ps = p_ranging_measurement_data->RangeMilliMeter *
+ c_tof_per_mm_ps;
+
+ /*
+ * vcselRate - xtalkCompRate
+ * (uint32 << 16) - FixPoint1616 = FixPoint1616.
+ * Divide result by 1000 to convert to mcps.
+ * 500 is added to ensure rounding when integer division
+ * truncates.
+ */
+ diff1_mcps = (((peak_signal_rate_kcps << 16) -
+ 2 * x_talk_comp_rate_kcps) + 500) / 1000;
+
+ /* vcselRate + xtalkCompRate */
+ diff2_mcps = ((peak_signal_rate_kcps << 16) + 500) / 1000;
+
+ /* Shift by 8 bits to increase resolution prior to the
+ * division */
+ diff1_mcps <<= 8;
+
+ /* FixPoint0824/FixPoint1616 = FixPoint2408 */
// xTalkCorrection = abs(diff1_mcps/diff2_mcps);
// abs is causing compiler overloading isue in C++, but unsigned types. So, redundant call anyway!
- xTalkCorrection = diff1_mcps/diff2_mcps;
-
- /* FixPoint2408 << 8 = FixPoint1616 */
- xTalkCorrection <<= 8;
-
- if(pRangingMeasurementData->RangeStatus != 0){
- pwMult = 1 << 16;
- } else {
- /* FixPoint1616/uint32 = FixPoint1616 */
- pwMult = deltaT_ps/cVcselPulseWidth_ps; /* smaller than 1.0f */
-
- /*
- * FixPoint1616 * FixPoint1616 = FixPoint3232, however both
- * values are small enough such that32 bits will not be
- * exceeded.
- */
- pwMult *= ((1 << 16) - xTalkCorrection);
-
- /* (FixPoint3232 >> 16) = FixPoint1616 */
- pwMult = (pwMult + c16BitRoundingParam) >> 16;
-
- /* FixPoint1616 + FixPoint1616 = FixPoint1616 */
- pwMult += (1 << 16);
-
- /*
- * At this point the value will be 1.xx, therefore if we square
- * the value this will exceed 32 bits. To address this perform
- * a single shift to the right before the multiplication.
- */
- pwMult >>= 1;
- /* FixPoint1715 * FixPoint1715 = FixPoint3430 */
- pwMult = pwMult * pwMult;
-
- /* (FixPoint3430 >> 14) = Fix1616 */
- pwMult >>= 14;
- }
-
- /* FixPoint1616 * uint32 = FixPoint1616 */
- sqr1 = pwMult * sigmaEstimateP1;
-
- /* (FixPoint1616 >> 16) = FixPoint3200 */
- sqr1 = (sqr1 + 0x8000) >> 16;
-
- /* FixPoint3200 * FixPoint3200 = FixPoint6400 */
- sqr1 *= sqr1;
-
- sqr2 = sigmaEstimateP2;
-
- /* (FixPoint1616 >> 16) = FixPoint3200 */
- sqr2 = (sqr2 + 0x8000) >> 16;
-
- /* FixPoint3200 * FixPoint3200 = FixPoint6400 */
- sqr2 *= sqr2;
-
- /* FixPoint64000 + FixPoint6400 = FixPoint6400 */
- sqrSum = sqr1 + sqr2;
-
- /* SQRT(FixPoin6400) = FixPoint3200 */
- sqrtResult_centi_ns = VL53L0X_isqrt(sqrSum);
-
- /* (FixPoint3200 << 16) = FixPoint1616 */
- sqrtResult_centi_ns <<= 16;
-
- /*
- * Note that the Speed Of Light is expressed in um per 1E-10
- * seconds (2997) Therefore to get mm/ns we have to divide by
- * 10000
- */
- sigmaEstRtn = (((sqrtResult_centi_ns+50)/100) /
- sigmaEstimateP3);
- sigmaEstRtn *= VL53L0X_SPEED_OF_LIGHT_IN_AIR;
-
- /* Add 5000 before dividing by 10000 to ensure rounding. */
- sigmaEstRtn += 5000;
- sigmaEstRtn /= 10000;
-
- if (sigmaEstRtn > cSigmaEstRtnMax) {
- /* Clip to prevent overflow. Will ensure safe
- * max result. */
- sigmaEstRtn = cSigmaEstRtnMax;
- }
- finalRangeIntegrationTimeMilliSecs =
- (finalRangeTimeoutMicroSecs + preRangeTimeoutMicroSecs + 500)/1000;
-
- /* sigmaEstRef = 1mm * 25ms/final range integration time (inc pre-range)
- * sqrt(FixPoint1616/int) = FixPoint2408)
- */
- sigmaEstRef =
- VL53L0X_isqrt((cDfltFinalRangeIntegrationTimeMilliSecs +
- finalRangeIntegrationTimeMilliSecs/2)/
- finalRangeIntegrationTimeMilliSecs);
-
- /* FixPoint2408 << 8 = FixPoint1616 */
- sigmaEstRef <<= 8;
- sigmaEstRef = (sigmaEstRef + 500)/1000;
-
- /* FixPoint1616 * FixPoint1616 = FixPoint3232 */
- sqr1 = sigmaEstRtn * sigmaEstRtn;
- /* FixPoint1616 * FixPoint1616 = FixPoint3232 */
- sqr2 = sigmaEstRef * sigmaEstRef;
-
- /* sqrt(FixPoint3232) = FixPoint1616 */
- sqrtResult = VL53L0X_isqrt((sqr1 + sqr2));
- /*
- * Note that the Shift by 4 bits increases resolution prior to
- * the sqrt, therefore the result must be shifted by 2 bits to
- * the right to revert back to the FixPoint1616 format.
- */
-
- sigmaEstimate = 1000 * sqrtResult;
-
- if ((peakSignalRate_kcps < 1) || (vcselTotalEventsRtn < 1) ||
- (sigmaEstimate > cSigmaEstMax)) {
- sigmaEstimate = cSigmaEstMax;
- }
-
- *pSigmaEstimate = (uint32_t)(sigmaEstimate);
- PALDevDataSet(Dev, SigmaEstimate, *pSigmaEstimate);
- Status = VL53L0X_calc_dmax(
- Dev,
- totalSignalRate_mcps,
- correctedSignalRate_mcps,
- pwMult,
- sigmaEstimateP1,
- sigmaEstimateP2,
- peakVcselDuration_us,
- pDmax_mm);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ x_talk_correction = diff1_mcps / diff2_mcps;
+
+ /* FixPoint2408 << 8 = FixPoint1616 */
+ x_talk_correction <<= 8;
+
+ if (p_ranging_measurement_data->RangeStatus != 0) {
+ pw_mult = 1 << 16;
+ } else {
+ /* FixPoint1616/uint32 = FixPoint1616 */
+ pw_mult = delta_t_ps / c_vcsel_pulse_width_ps; /* smaller than 1.0f */
+
+ /*
+ * FixPoint1616 * FixPoint1616 = FixPoint3232, however both
+ * values are small enough such that32 bits will not be
+ * exceeded.
+ */
+ pw_mult *= ((1 << 16) - x_talk_correction);
+
+ /* (FixPoint3232 >> 16) = FixPoint1616 */
+ pw_mult = (pw_mult + c_16bit_rounding_param) >> 16;
+
+ /* FixPoint1616 + FixPoint1616 = FixPoint1616 */
+ pw_mult += (1 << 16);
+
+ /*
+ * At this point the value will be 1.xx, therefore if we square
+ * the value this will exceed 32 bits. To address this perform
+ * a single shift to the right before the multiplication.
+ */
+ pw_mult >>= 1;
+ /* FixPoint1715 * FixPoint1715 = FixPoint3430 */
+ pw_mult = pw_mult * pw_mult;
+
+ /* (FixPoint3430 >> 14) = Fix1616 */
+ pw_mult >>= 14;
+ }
+
+ /* FixPoint1616 * uint32 = FixPoint1616 */
+ sqr1 = pw_mult * sigma_estimate_p1;
+
+ /* (FixPoint1616 >> 16) = FixPoint3200 */
+ sqr1 = (sqr1 + 0x8000) >> 16;
+
+ /* FixPoint3200 * FixPoint3200 = FixPoint6400 */
+ sqr1 *= sqr1;
+
+ sqr2 = sigma_estimate_p2;
+
+ /* (FixPoint1616 >> 16) = FixPoint3200 */
+ sqr2 = (sqr2 + 0x8000) >> 16;
+
+ /* FixPoint3200 * FixPoint3200 = FixPoint6400 */
+ sqr2 *= sqr2;
+
+ /* FixPoint64000 + FixPoint6400 = FixPoint6400 */
+ sqr_sum = sqr1 + sqr2;
+
+ /* SQRT(FixPoin6400) = FixPoint3200 */
+ sqrt_result_centi_ns = vl53l0x_isqrt(sqr_sum);
+
+ /* (FixPoint3200 << 16) = FixPoint1616 */
+ sqrt_result_centi_ns <<= 16;
+
+ /*
+ * Note that the Speed Of Light is expressed in um per 1E-10
+ * seconds (2997) Therefore to get mm/ns we have to divide by
+ * 10000
+ */
+ sigma_est_rtn = (((sqrt_result_centi_ns + 50) / 100) /
+ sigma_estimate_p3);
+ sigma_est_rtn *= VL53L0X_SPEED_OF_LIGHT_IN_AIR;
+
+ /* Add 5000 before dividing by 10000 to ensure rounding. */
+ sigma_est_rtn += 5000;
+ sigma_est_rtn /= 10000;
+
+ if (sigma_est_rtn > c_sigma_est_rtn_max) {
+ /* Clip to prevent overflow. Will ensure safe
+ * max result. */
+ sigma_est_rtn = c_sigma_est_rtn_max;
+ }
+ final_range_integration_time_milli_secs =
+ (final_range_timeout_micro_secs + pre_range_timeout_micro_secs + 500) / 1000;
+
+ /* sigmaEstRef = 1mm * 25ms/final range integration time (inc pre-range)
+ * sqrt(FixPoint1616/int) = FixPoint2408)
+ */
+ sigma_est_ref =
+ vl53l0x_isqrt((c_dflt_final_range_integration_time_milli_secs +
+ final_range_integration_time_milli_secs / 2) /
+ final_range_integration_time_milli_secs);
+
+ /* FixPoint2408 << 8 = FixPoint1616 */
+ sigma_est_ref <<= 8;
+ sigma_est_ref = (sigma_est_ref + 500) / 1000;
+
+ /* FixPoint1616 * FixPoint1616 = FixPoint3232 */
+ sqr1 = sigma_est_rtn * sigma_est_rtn;
+ /* FixPoint1616 * FixPoint1616 = FixPoint3232 */
+ sqr2 = sigma_est_ref * sigma_est_ref;
+
+ /* sqrt(FixPoint3232) = FixPoint1616 */
+ sqrt_result = vl53l0x_isqrt((sqr1 + sqr2));
+ /*
+ * Note that the Shift by 4 bits increases resolution prior to
+ * the sqrt, therefore the result must be shifted by 2 bits to
+ * the right to revert back to the FixPoint1616 format.
+ */
+
+ sigma_estimate = 1000 * sqrt_result;
+
+ if ((peak_signal_rate_kcps < 1) || (vcsel_total_events_rtn < 1) ||
+ (sigma_estimate > c_sigma_est_max)) {
+ sigma_estimate = c_sigma_est_max;
+ }
+
+ *p_sigma_estimate = (uint32_t)(sigma_estimate);
+ PALDevDataSet(dev, SigmaEstimate, *p_sigma_estimate);
+ status = vl53l0x_calc_dmax(
+ dev,
+ total_signal_rate_mcps,
+ corrected_signal_rate_mcps,
+ pw_mult,
+ sigma_estimate_p1,
+ sigma_estimate_p2,
+ peak_vcsel_duration_us,
+ p_dmax_mm);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_get_pal_range_status(VL53L0X_DEV Dev,
- uint8_t DeviceRangeStatus,
- FixPoint1616_t SignalRate,
- uint16_t EffectiveSpadRtnCount,
- VL53L0X_RangingMeasurementData_t *pRangingMeasurementData,
- uint8_t *pPalRangeStatus)
+VL53L0X_Error VL53L0X::vl53l0x_get_pal_range_status(VL53L0X_DEV dev,
+ uint8_t device_range_status,
+ FixPoint1616_t signal_rate,
+ uint16_t effective_spad_rtn_count,
+ VL53L0X_RangingMeasurementData_t *p_ranging_measurement_data,
+ uint8_t *p_pal_range_status)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t NoneFlag;
- uint8_t SigmaLimitflag = 0;
- uint8_t SignalRefClipflag = 0;
- uint8_t RangeIgnoreThresholdflag = 0;
- uint8_t SigmaLimitCheckEnable = 0;
- uint8_t SignalRateFinalRangeLimitCheckEnable = 0;
- uint8_t SignalRefClipLimitCheckEnable = 0;
- uint8_t RangeIgnoreThresholdLimitCheckEnable = 0;
- FixPoint1616_t SigmaEstimate;
- FixPoint1616_t SigmaLimitValue;
- FixPoint1616_t SignalRefClipValue;
- FixPoint1616_t RangeIgnoreThresholdValue;
- FixPoint1616_t SignalRatePerSpad;
- uint8_t DeviceRangeStatusInternal = 0;
- uint16_t tmpWord = 0;
- uint8_t Temp8;
- uint32_t Dmax_mm = 0;
- FixPoint1616_t LastSignalRefMcps;
-
- LOG_FUNCTION_START("");
-
-
- /*
- * VL53L0X has a good ranging when the value of the
- * DeviceRangeStatus = 11. This function will replace the value 0 with
- * the value 11 in the DeviceRangeStatus.
- * In addition, the SigmaEstimator is not included in the VL53L0X
- * DeviceRangeStatus, this will be added in the PalRangeStatus.
- */
-
- DeviceRangeStatusInternal = ((DeviceRangeStatus & 0x78) >> 3);
-
- if (DeviceRangeStatusInternal == 0 ||
- DeviceRangeStatusInternal == 5 ||
- DeviceRangeStatusInternal == 7 ||
- DeviceRangeStatusInternal == 12 ||
- DeviceRangeStatusInternal == 13 ||
- DeviceRangeStatusInternal == 14 ||
- DeviceRangeStatusInternal == 15
- ) {
- NoneFlag = 1;
- } else {
- NoneFlag = 0;
- }
-
- /*
- * Check if Sigma limit is enabled, if yes then do comparison with limit
- * value and put the result back into pPalRangeStatus.
- */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
- &SigmaLimitCheckEnable);
-
- if ((SigmaLimitCheckEnable != 0) && (Status == VL53L0X_ERROR_NONE)) {
- /*
- * compute the Sigma and check with limit
- */
- Status = VL53L0X_calc_sigma_estimate(
- Dev,
- pRangingMeasurementData,
- &SigmaEstimate,
- &Dmax_mm);
- if (Status == VL53L0X_ERROR_NONE)
- pRangingMeasurementData->RangeDMaxMilliMeter = Dmax_mm;
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
- &SigmaLimitValue);
-
- if ((SigmaLimitValue > 0) &&
- (SigmaEstimate > SigmaLimitValue))
- /* Limit Fail */
- SigmaLimitflag = 1;
- }
- }
-
- /*
- * Check if Signal ref clip limit is enabled, if yes then do comparison
- * with limit value and put the result back into pPalRangeStatus.
- */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
- &SignalRefClipLimitCheckEnable);
-
- if ((SignalRefClipLimitCheckEnable != 0) &&
- (Status == VL53L0X_ERROR_NONE)) {
-
- Status = VL53L0X_GetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
- &SignalRefClipValue);
-
- /* Read LastSignalRefMcps from device */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_RESULT_PEAK_SIGNAL_RATE_REF,
- &tmpWord);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- LastSignalRefMcps = VL53L0X_FIXPOINT97TOFIXPOINT1616(tmpWord);
- PALDevDataSet(Dev, LastSignalRefMcps, LastSignalRefMcps);
-
- if ((SignalRefClipValue > 0) &&
- (LastSignalRefMcps > SignalRefClipValue)) {
- /* Limit Fail */
- SignalRefClipflag = 1;
- }
- }
-
- /*
- * Check if Signal ref clip limit is enabled, if yes then do comparison
- * with limit value and put the result back into pPalRangeStatus.
- * EffectiveSpadRtnCount has a format 8.8
- * If (Return signal rate < (1.5 x Xtalk x number of Spads)) : FAIL
- */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
- &RangeIgnoreThresholdLimitCheckEnable);
-
- if ((RangeIgnoreThresholdLimitCheckEnable != 0) &&
- (Status == VL53L0X_ERROR_NONE)) {
-
- /* Compute the signal rate per spad */
- if (EffectiveSpadRtnCount == 0) {
- SignalRatePerSpad = 0;
- } else {
- SignalRatePerSpad = (FixPoint1616_t)((256 * SignalRate)
- / EffectiveSpadRtnCount);
- }
-
- Status = VL53L0X_GetLimitCheckValue(Dev,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
- &RangeIgnoreThresholdValue);
-
- if ((RangeIgnoreThresholdValue > 0) &&
- (SignalRatePerSpad < RangeIgnoreThresholdValue)) {
- /* Limit Fail add 2^6 to range status */
- RangeIgnoreThresholdflag = 1;
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (NoneFlag == 1) {
- *pPalRangeStatus = 255; /* NONE */
- } else if (DeviceRangeStatusInternal == 1 ||
- DeviceRangeStatusInternal == 2 ||
- DeviceRangeStatusInternal == 3) {
- *pPalRangeStatus = 5; /* HW fail */
- } else if (DeviceRangeStatusInternal == 6 ||
- DeviceRangeStatusInternal == 9) {
- *pPalRangeStatus = 4; /* Phase fail */
- } else if (DeviceRangeStatusInternal == 8 ||
- DeviceRangeStatusInternal == 10 ||
- SignalRefClipflag == 1) {
- *pPalRangeStatus = 3; /* Min range */
- } else if (DeviceRangeStatusInternal == 4 ||
- RangeIgnoreThresholdflag == 1) {
- *pPalRangeStatus = 2; /* Signal Fail */
- } else if (SigmaLimitflag == 1) {
- *pPalRangeStatus = 1; /* Sigma Fail */
- } else {
- *pPalRangeStatus = 0; /* Range Valid */
- }
- }
-
- /* DMAX only relevant during range error */
- if (*pPalRangeStatus == 0)
- pRangingMeasurementData->RangeDMaxMilliMeter = 0;
-
- /* fill the Limit Check Status */
-
- Status = VL53L0X_GetLimitCheckEnable(Dev,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE,
- &SignalRateFinalRangeLimitCheckEnable);
-
- if (Status == VL53L0X_ERROR_NONE) {
- if ((SigmaLimitCheckEnable == 0) || (SigmaLimitflag == 1))
- Temp8 = 1;
- else
- Temp8 = 0;
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksStatus,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, Temp8);
-
- if ((DeviceRangeStatusInternal == 4) ||
- (SignalRateFinalRangeLimitCheckEnable == 0))
- Temp8 = 1;
- else
- Temp8 = 0;
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksStatus,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE,
- Temp8);
-
- if ((SignalRefClipLimitCheckEnable == 0) ||
- (SignalRefClipflag == 1))
- Temp8 = 1;
- else
- Temp8 = 0;
-
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksStatus,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP, Temp8);
-
- if ((RangeIgnoreThresholdLimitCheckEnable == 0) ||
- (RangeIgnoreThresholdflag == 1))
- Temp8 = 1;
- else
- Temp8 = 0;
-
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksStatus,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
- Temp8);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t none_flag;
+ uint8_t sigma_limitflag = 0;
+ uint8_t signal_ref_clipflag = 0;
+ uint8_t range_ignore_thresholdflag = 0;
+ uint8_t sigma_limit_check_enable = 0;
+ uint8_t signal_rate_final_range_limit_check_enable = 0;
+ uint8_t signal_ref_clip_limit_check_enable = 0;
+ uint8_t range_ignore_threshold_limit_check_enable = 0;
+ FixPoint1616_t sigma_estimate;
+ FixPoint1616_t sigma_limit_value;
+ FixPoint1616_t signal_ref_clip_value;
+ FixPoint1616_t range_ignore_threshold_value;
+ FixPoint1616_t signal_rate_per_spad;
+ uint8_t device_range_status_internal = 0;
+ uint16_t tmp_word = 0;
+ uint8_t temp8;
+ uint32_t dmax_mm = 0;
+ FixPoint1616_t last_signal_ref_mcps;
+
+ LOG_FUNCTION_START("");
+
+
+ /*
+ * VL53L0X has a good ranging when the value of the
+ * DeviceRangeStatus = 11. This function will replace the value 0 with
+ * the value 11 in the DeviceRangeStatus.
+ * In addition, the SigmaEstimator is not included in the VL53L0X
+ * DeviceRangeStatus, this will be added in the PalRangeStatus.
+ */
+
+ device_range_status_internal = ((device_range_status & 0x78) >> 3);
+
+ if (device_range_status_internal == 0 ||
+ device_range_status_internal == 5 ||
+ device_range_status_internal == 7 ||
+ device_range_status_internal == 12 ||
+ device_range_status_internal == 13 ||
+ device_range_status_internal == 14 ||
+ device_range_status_internal == 15
+ ) {
+ none_flag = 1;
+ } else {
+ none_flag = 0;
+ }
+
+ /*
+ * Check if Sigma limit is enabled, if yes then do comparison with limit
+ * value and put the result back into pPalRangeStatus.
+ */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
+ &sigma_limit_check_enable);
+
+ if ((sigma_limit_check_enable != 0) && (status == VL53L0X_ERROR_NONE)) {
+ /*
+ * compute the Sigma and check with limit
+ */
+ status = vl53l0x_calc_sigma_estimate(
+ dev,
+ p_ranging_measurement_data,
+ &sigma_estimate,
+ &dmax_mm);
+ if (status == VL53L0X_ERROR_NONE)
+ p_ranging_measurement_data->RangeDMaxMilliMeter = dmax_mm;
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
+ &sigma_limit_value);
+
+ if ((sigma_limit_value > 0) &&
+ (sigma_estimate > sigma_limit_value))
+ /* Limit Fail */
+ sigma_limitflag = 1;
+ }
+ }
+
+ /*
+ * Check if Signal ref clip limit is enabled, if yes then do comparison
+ * with limit value and put the result back into pPalRangeStatus.
+ */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
+ &signal_ref_clip_limit_check_enable);
+
+ if ((signal_ref_clip_limit_check_enable != 0) &&
+ (status == VL53L0X_ERROR_NONE)) {
+
+ status = vl53l0x_get_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
+ &signal_ref_clip_value);
+
+ /* Read LastSignalRefMcps from device */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_RESULT_PEAK_SIGNAL_RATE_REF,
+ &tmp_word);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ last_signal_ref_mcps = VL53L0X_FIXPOINT97TOFIXPOINT1616(tmp_word);
+ PALDevDataSet(dev, LastSignalRefMcps, last_signal_ref_mcps);
+
+ if ((signal_ref_clip_value > 0) &&
+ (last_signal_ref_mcps > signal_ref_clip_value)) {
+ /* Limit Fail */
+ signal_ref_clipflag = 1;
+ }
+ }
+
+ /*
+ * Check if Signal ref clip limit is enabled, if yes then do comparison
+ * with limit value and put the result back into pPalRangeStatus.
+ * EffectiveSpadRtnCount has a format 8.8
+ * If (Return signal rate < (1.5 x Xtalk x number of Spads)) : FAIL
+ */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
+ &range_ignore_threshold_limit_check_enable);
+
+ if ((range_ignore_threshold_limit_check_enable != 0) &&
+ (status == VL53L0X_ERROR_NONE)) {
+
+ /* Compute the signal rate per spad */
+ if (effective_spad_rtn_count == 0) {
+ signal_rate_per_spad = 0;
+ } else {
+ signal_rate_per_spad = (FixPoint1616_t)((256 * signal_rate)
+ / effective_spad_rtn_count);
+ }
+
+ status = vl53l0x_get_limit_check_value(dev,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
+ &range_ignore_threshold_value);
+
+ if ((range_ignore_threshold_value > 0) &&
+ (signal_rate_per_spad < range_ignore_threshold_value)) {
+ /* Limit Fail add 2^6 to range status */
+ range_ignore_thresholdflag = 1;
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (none_flag == 1) {
+ *p_pal_range_status = 255; /* NONE */
+ } else if (device_range_status_internal == 1 ||
+ device_range_status_internal == 2 ||
+ device_range_status_internal == 3) {
+ *p_pal_range_status = 5; /* HW fail */
+ } else if (device_range_status_internal == 6 ||
+ device_range_status_internal == 9) {
+ *p_pal_range_status = 4; /* Phase fail */
+ } else if (device_range_status_internal == 8 ||
+ device_range_status_internal == 10 ||
+ signal_ref_clipflag == 1) {
+ *p_pal_range_status = 3; /* Min range */
+ } else if (device_range_status_internal == 4 ||
+ range_ignore_thresholdflag == 1) {
+ *p_pal_range_status = 2; /* Signal Fail */
+ } else if (sigma_limitflag == 1) {
+ *p_pal_range_status = 1; /* Sigma Fail */
+ } else {
+ *p_pal_range_status = 0; /* Range Valid */
+ }
+ }
+
+ /* DMAX only relevant during range error */
+ if (*p_pal_range_status == 0)
+ p_ranging_measurement_data->RangeDMaxMilliMeter = 0;
+
+ /* fill the Limit Check Status */
+
+ status = vl53l0x_get_limit_check_enable(dev,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE,
+ &signal_rate_final_range_limit_check_enable);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if ((sigma_limit_check_enable == 0) || (sigma_limitflag == 1))
+ temp8 = 1;
+ else
+ temp8 = 0;
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksStatus,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, temp8);
+
+ if ((device_range_status_internal == 4) ||
+ (signal_rate_final_range_limit_check_enable == 0))
+ temp8 = 1;
+ else
+ temp8 = 0;
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksStatus,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE,
+ temp8);
+
+ if ((signal_ref_clip_limit_check_enable == 0) ||
+ (signal_ref_clipflag == 1))
+ temp8 = 1;
+ else
+ temp8 = 0;
+
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksStatus,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP, temp8);
+
+ if ((range_ignore_threshold_limit_check_enable == 0) ||
+ (range_ignore_thresholdflag == 1))
+ temp8 = 1;
+ else
+ temp8 = 0;
+
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksStatus,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
+ temp8);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetRangingMeasurementData(VL53L0X_DEV Dev,
- VL53L0X_RangingMeasurementData_t *pRangingMeasurementData)
+VL53L0X_Error VL53L0X::vl53l0x_get_ranging_measurement_data(VL53L0X_DEV dev,
+ VL53L0X_RangingMeasurementData_t *p_ranging_measurement_data)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t DeviceRangeStatus;
- uint8_t RangeFractionalEnable;
- uint8_t PalRangeStatus;
- uint8_t XTalkCompensationEnable;
- uint16_t AmbientRate;
- FixPoint1616_t SignalRate;
- uint16_t XTalkCompensationRateMegaCps;
- uint16_t EffectiveSpadRtnCount;
- uint16_t tmpuint16;
- uint16_t XtalkRangeMilliMeter;
- uint16_t LinearityCorrectiveGain;
- uint8_t localBuffer[12];
- VL53L0X_RangingMeasurementData_t LastRangeDataBuffer;
-
- LOG_FUNCTION_START("");
-
- /*
- * use multi read even if some registers are not useful, result will
- * be more efficient
- * start reading at 0x14 dec20
- * end reading at 0x21 dec33 total 14 bytes to read
- */
- Status = VL53L0X_ReadMulti(Dev, 0x14, localBuffer, 12);
-
- if (Status == VL53L0X_ERROR_NONE) {
-
- pRangingMeasurementData->ZoneId = 0; /* Only one zone */
- pRangingMeasurementData->TimeStamp = 0; /* Not Implemented */
-
- tmpuint16 = VL53L0X_MAKEUINT16(localBuffer[11], localBuffer[10]);
- /* cut1.1 if SYSTEM__RANGE_CONFIG if 1 range is 2bits fractional
- *(format 11.2) else no fractional
- */
-
- pRangingMeasurementData->MeasurementTimeUsec = 0;
-
- SignalRate = VL53L0X_FIXPOINT97TOFIXPOINT1616(
- VL53L0X_MAKEUINT16(localBuffer[7], localBuffer[6]));
- /* peak_signal_count_rate_rtn_mcps */
- pRangingMeasurementData->SignalRateRtnMegaCps = SignalRate;
-
- AmbientRate = VL53L0X_MAKEUINT16(localBuffer[9], localBuffer[8]);
- pRangingMeasurementData->AmbientRateRtnMegaCps =
- VL53L0X_FIXPOINT97TOFIXPOINT1616(AmbientRate);
-
- EffectiveSpadRtnCount = VL53L0X_MAKEUINT16(localBuffer[3],
- localBuffer[2]);
- /* EffectiveSpadRtnCount is 8.8 format */
- pRangingMeasurementData->EffectiveSpadRtnCount =
- EffectiveSpadRtnCount;
-
- DeviceRangeStatus = localBuffer[0];
-
- /* Get Linearity Corrective Gain */
- LinearityCorrectiveGain = PALDevDataGet(Dev,
- LinearityCorrectiveGain);
-
- /* Get ranging configuration */
- RangeFractionalEnable = PALDevDataGet(Dev,
- RangeFractionalEnable);
-
- if (LinearityCorrectiveGain != 1000) {
-
- tmpuint16 = (uint16_t)((LinearityCorrectiveGain
- * tmpuint16 + 500) / 1000);
-
- /* Implement Xtalk */
- VL53L0X_GETPARAMETERFIELD(Dev,
- XTalkCompensationRateMegaCps,
- XTalkCompensationRateMegaCps);
- VL53L0X_GETPARAMETERFIELD(Dev, XTalkCompensationEnable,
- XTalkCompensationEnable);
-
- if (XTalkCompensationEnable) {
-
- if ((SignalRate
- - ((XTalkCompensationRateMegaCps
- * EffectiveSpadRtnCount) >> 8))
- <= 0) {
- if (RangeFractionalEnable)
- XtalkRangeMilliMeter = 8888;
- else
- XtalkRangeMilliMeter = 8888
- << 2;
- } else {
- XtalkRangeMilliMeter =
- (tmpuint16 * SignalRate)
- / (SignalRate
- - ((XTalkCompensationRateMegaCps
- * EffectiveSpadRtnCount)
- >> 8));
- }
-
- tmpuint16 = XtalkRangeMilliMeter;
- }
-
- }
-
- if (RangeFractionalEnable) {
- pRangingMeasurementData->RangeMilliMeter =
- (uint16_t)((tmpuint16) >> 2);
- pRangingMeasurementData->RangeFractionalPart =
- (uint8_t)((tmpuint16 & 0x03) << 6);
- } else {
- pRangingMeasurementData->RangeMilliMeter = tmpuint16;
- pRangingMeasurementData->RangeFractionalPart = 0;
- }
-
- /*
- * For a standard definition of RangeStatus, this should
- * return 0 in case of good result after a ranging
- * The range status depends on the device so call a device
- * specific function to obtain the right Status.
- */
- Status |= VL53L0X_get_pal_range_status(Dev, DeviceRangeStatus,
- SignalRate, EffectiveSpadRtnCount,
- pRangingMeasurementData, &PalRangeStatus);
-
- if (Status == VL53L0X_ERROR_NONE)
- pRangingMeasurementData->RangeStatus = PalRangeStatus;
-
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* Copy last read data into Dev buffer */
- LastRangeDataBuffer = PALDevDataGet(Dev, LastRangeMeasure);
-
- LastRangeDataBuffer.RangeMilliMeter =
- pRangingMeasurementData->RangeMilliMeter;
- LastRangeDataBuffer.RangeFractionalPart =
- pRangingMeasurementData->RangeFractionalPart;
- LastRangeDataBuffer.RangeDMaxMilliMeter =
- pRangingMeasurementData->RangeDMaxMilliMeter;
- LastRangeDataBuffer.MeasurementTimeUsec =
- pRangingMeasurementData->MeasurementTimeUsec;
- LastRangeDataBuffer.SignalRateRtnMegaCps =
- pRangingMeasurementData->SignalRateRtnMegaCps;
- LastRangeDataBuffer.AmbientRateRtnMegaCps =
- pRangingMeasurementData->AmbientRateRtnMegaCps;
- LastRangeDataBuffer.EffectiveSpadRtnCount =
- pRangingMeasurementData->EffectiveSpadRtnCount;
- LastRangeDataBuffer.RangeStatus =
- pRangingMeasurementData->RangeStatus;
-
- PALDevDataSet(Dev, LastRangeMeasure, LastRangeDataBuffer);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t device_range_status;
+ uint8_t range_fractional_enable;
+ uint8_t pal_range_status;
+ uint8_t x_talk_compensation_enable;
+ uint16_t ambient_rate;
+ FixPoint1616_t signal_rate;
+ uint16_t x_talk_compensation_rate_mega_cps;
+ uint16_t effective_spad_rtn_count;
+ uint16_t tmpuint16;
+ uint16_t xtalk_range_milli_meter;
+ uint16_t linearity_corrective_gain;
+ uint8_t localBuffer[12];
+ VL53L0X_RangingMeasurementData_t last_range_data_buffer;
+
+ LOG_FUNCTION_START("");
+
+ /*
+ * use multi read even if some registers are not useful, result will
+ * be more efficient
+ * start reading at 0x14 dec20
+ * end reading at 0x21 dec33 total 14 bytes to read
+ */
+ status = vl53l0x_read_multi(dev, 0x14, localBuffer, 12);
+
+ if (status == VL53L0X_ERROR_NONE) {
+
+ p_ranging_measurement_data->ZoneId = 0; /* Only one zone */
+ p_ranging_measurement_data->TimeStamp = 0; /* Not Implemented */
+
+ tmpuint16 = VL53L0X_MAKEUINT16(localBuffer[11], localBuffer[10]);
+ /* cut1.1 if SYSTEM__RANGE_CONFIG if 1 range is 2bits fractional
+ *(format 11.2) else no fractional
+ */
+
+ p_ranging_measurement_data->MeasurementTimeUsec = 0;
+
+ signal_rate = VL53L0X_FIXPOINT97TOFIXPOINT1616(
+ VL53L0X_MAKEUINT16(localBuffer[7], localBuffer[6]));
+ /* peak_signal_count_rate_rtn_mcps */
+ p_ranging_measurement_data->SignalRateRtnMegaCps = signal_rate;
+
+ ambient_rate = VL53L0X_MAKEUINT16(localBuffer[9], localBuffer[8]);
+ p_ranging_measurement_data->AmbientRateRtnMegaCps =
+ VL53L0X_FIXPOINT97TOFIXPOINT1616(ambient_rate);
+
+ effective_spad_rtn_count = VL53L0X_MAKEUINT16(localBuffer[3],
+ localBuffer[2]);
+ /* EffectiveSpadRtnCount is 8.8 format */
+ p_ranging_measurement_data->EffectiveSpadRtnCount =
+ effective_spad_rtn_count;
+
+ device_range_status = localBuffer[0];
+
+ /* Get Linearity Corrective Gain */
+ linearity_corrective_gain = PALDevDataGet(dev,
+ LinearityCorrectiveGain);
+
+ /* Get ranging configuration */
+ range_fractional_enable = PALDevDataGet(dev,
+ RangeFractionalEnable);
+
+ if (linearity_corrective_gain != 1000) {
+
+ tmpuint16 = (uint16_t)((linearity_corrective_gain
+ * tmpuint16 + 500) / 1000);
+
+ /* Implement Xtalk */
+ VL53L0X_GETPARAMETERFIELD(dev,
+ XTalkCompensationRateMegaCps,
+ x_talk_compensation_rate_mega_cps);
+ VL53L0X_GETPARAMETERFIELD(dev, XTalkCompensationEnable,
+ x_talk_compensation_enable);
+
+ if (x_talk_compensation_enable) {
+
+ if ((signal_rate
+ - ((x_talk_compensation_rate_mega_cps
+ * effective_spad_rtn_count) >> 8))
+ <= 0) {
+ if (range_fractional_enable)
+ xtalk_range_milli_meter = 8888;
+ else
+ xtalk_range_milli_meter = 8888
+ << 2;
+ } else {
+ xtalk_range_milli_meter =
+ (tmpuint16 * signal_rate)
+ / (signal_rate
+ - ((x_talk_compensation_rate_mega_cps
+ * effective_spad_rtn_count)
+ >> 8));
+ }
+
+ tmpuint16 = xtalk_range_milli_meter;
+ }
+
+ }
+
+ if (range_fractional_enable) {
+ p_ranging_measurement_data->RangeMilliMeter =
+ (uint16_t)((tmpuint16) >> 2);
+ p_ranging_measurement_data->RangeFractionalPart =
+ (uint8_t)((tmpuint16 & 0x03) << 6);
+ } else {
+ p_ranging_measurement_data->RangeMilliMeter = tmpuint16;
+ p_ranging_measurement_data->RangeFractionalPart = 0;
+ }
+
+ /*
+ * For a standard definition of RangeStatus, this should
+ * return 0 in case of good result after a ranging
+ * The range status depends on the device so call a device
+ * specific function to obtain the right Status.
+ */
+ status |= vl53l0x_get_pal_range_status(dev, device_range_status,
+ signal_rate, effective_spad_rtn_count,
+ p_ranging_measurement_data, &pal_range_status);
+
+ if (status == VL53L0X_ERROR_NONE)
+ p_ranging_measurement_data->RangeStatus = pal_range_status;
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Copy last read data into Dev buffer */
+ last_range_data_buffer = PALDevDataGet(dev, LastRangeMeasure);
+
+ last_range_data_buffer.RangeMilliMeter =
+ p_ranging_measurement_data->RangeMilliMeter;
+ last_range_data_buffer.RangeFractionalPart =
+ p_ranging_measurement_data->RangeFractionalPart;
+ last_range_data_buffer.RangeDMaxMilliMeter =
+ p_ranging_measurement_data->RangeDMaxMilliMeter;
+ last_range_data_buffer.MeasurementTimeUsec =
+ p_ranging_measurement_data->MeasurementTimeUsec;
+ last_range_data_buffer.SignalRateRtnMegaCps =
+ p_ranging_measurement_data->SignalRateRtnMegaCps;
+ last_range_data_buffer.AmbientRateRtnMegaCps =
+ p_ranging_measurement_data->AmbientRateRtnMegaCps;
+ last_range_data_buffer.EffectiveSpadRtnCount =
+ p_ranging_measurement_data->EffectiveSpadRtnCount;
+ last_range_data_buffer.RangeStatus =
+ p_ranging_measurement_data->RangeStatus;
+
+ PALDevDataSet(dev, LastRangeMeasure, last_range_data_buffer);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_PerformSingleRangingMeasurement(VL53L0X_DEV Dev,
- VL53L0X_RangingMeasurementData_t *pRangingMeasurementData)
+VL53L0X_Error VL53L0X::vl53l0x_perform_single_ranging_measurement(VL53L0X_DEV dev,
+ VL53L0X_RangingMeasurementData_t *p_ranging_measurement_data)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
-
- LOG_FUNCTION_START("");
-
- /* This function will do a complete single ranging
- * Here we fix the mode! */
- Status = VL53L0X_SetDeviceMode(Dev, VL53L0X_DEVICEMODE_SINGLE_RANGING);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_PerformSingleMeasurement(Dev);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetRangingMeasurementData(Dev,
- pRangingMeasurementData);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_ClearInterruptMask(Dev, 0);
-
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+
+ LOG_FUNCTION_START("");
+
+ /* This function will do a complete single ranging
+ * Here we fix the mode! */
+ status = vl53l0x_set_device_mode(dev, VL53L0X_DEVICEMODE_SINGLE_RANGING);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_single_measurement(dev);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_ranging_measurement_data(dev,
+ p_ranging_measurement_data);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_clear_interrupt_mask(dev, 0);
+
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::perform_ref_signal_measurement(VL53L0X_DEV Dev,
- uint16_t *refSignalRate)
+VL53L0X_Error VL53L0X::perform_ref_signal_measurement(VL53L0X_DEV dev,
+ uint16_t *p_ref_signal_rate)
{
- VL53L0X_Error status = VL53L0X_ERROR_NONE;
- VL53L0X_RangingMeasurementData_t rangingMeasurementData;
-
- uint8_t SequenceConfig = 0;
-
- /* store the value of the sequence config,
- * this will be reset before the end of the function
- */
-
- SequenceConfig = PALDevDataGet(Dev, SequenceConfig);
-
- /*
- * This function performs a reference signal rate measurement.
- */
- if (status == VL53L0X_ERROR_NONE)
- status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0xC0);
-
- if (status == VL53L0X_ERROR_NONE)
- status = VL53L0X_PerformSingleRangingMeasurement(Dev,
- &rangingMeasurementData);
-
- if (status == VL53L0X_ERROR_NONE)
- status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
-
- if (status == VL53L0X_ERROR_NONE)
- status = VL53L0X_RdWord(Dev,
- VL53L0X_REG_RESULT_PEAK_SIGNAL_RATE_REF,
- refSignalRate);
-
- if (status == VL53L0X_ERROR_NONE)
- status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- if (status == VL53L0X_ERROR_NONE) {
- /* restore the previous Sequence Config */
- status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- SequenceConfig);
- if (status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, SequenceConfig, SequenceConfig);
- }
-
- return status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ VL53L0X_RangingMeasurementData_t ranging_measurement_data;
+
+ uint8_t sequence_config = 0;
+
+ /* store the value of the sequence config,
+ * this will be reset before the end of the function
+ */
+
+ sequence_config = PALDevDataGet(dev, SequenceConfig);
+
+ /*
+ * This function performs a reference signal rate measurement.
+ */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0xC0);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_single_ranging_measurement(dev,
+ &ranging_measurement_data);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_read_word(dev,
+ VL53L0X_REG_RESULT_PEAK_SIGNAL_RATE_REF,
+ p_ref_signal_rate);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* restore the previous Sequence Config */
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ sequence_config);
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, SequenceConfig, sequence_config);
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_perform_ref_spad_management(VL53L0X_DEV Dev,
- uint32_t *refSpadCount,
- uint8_t *isApertureSpads)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_perform_ref_spad_management(VL53L0X_DEV dev,
+ uint32_t *ref_spad_count,
+ uint8_t *is_aperture_spads)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t lastSpadArray[6];
- uint8_t startSelect = 0xB4;
- uint32_t minimumSpadCount = 3;
- uint32_t maxSpadCount = 44;
- uint32_t currentSpadIndex = 0;
- uint32_t lastSpadIndex = 0;
- int32_t nextGoodSpad = 0;
- uint16_t targetRefRate = 0x0A00; /* 20 MCPS in 9:7 format */
- uint16_t peakSignalRateRef;
- uint32_t needAptSpads = 0;
- uint32_t index = 0;
- uint32_t spadArraySize = 6;
- uint32_t signalRateDiff = 0;
- uint32_t lastSignalRateDiff = 0;
- uint8_t complete = 0;
- uint8_t VhvSettings = 0;
- uint8_t PhaseCal = 0;
- uint32_t refSpadCount_int = 0;
- uint8_t isApertureSpads_int = 0;
-
- /*
- * The reference SPAD initialization procedure determines the minimum
- * amount of reference spads to be enables to achieve a target reference
- * signal rate and should be performed once during initialization.
- *
- * Either aperture or non-aperture spads are applied but never both.
- * Firstly non-aperture spads are set, begining with 5 spads, and
- * increased one spad at a time until the closest measurement to the
- * target rate is achieved.
- *
- * If the target rate is exceeded when 5 non-aperture spads are enabled,
- * initialization is performed instead with aperture spads.
- *
- * When setting spads, a 'Good Spad Map' is applied.
- *
- * This procedure operates within a SPAD window of interest of a maximum
- * 44 spads.
- * The start point is currently fixed to 180, which lies towards the end
- * of the non-aperture quadrant and runs in to the adjacent aperture
- * quadrant.
- */
-
-
- targetRefRate = PALDevDataGet(Dev, targetRefRate);
-
- /*
- * Initialize Spad arrays.
- * Currently the good spad map is initialised to 'All good'.
- * This is a short term implementation. The good spad map will be
- * provided as an input.
- * Note that there are 6 bytes. Only the first 44 bits will be used to
- * represent spads.
- */
- for (index = 0; index < spadArraySize; index++)
- Dev->Data.SpadData.RefSpadEnables[index] = 0;
-
-
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_DYNAMIC_SPAD_REF_EN_START_OFFSET, 0x00);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_DYNAMIC_SPAD_NUM_REQUESTED_REF_SPAD, 0x2C);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_REF_EN_START_SELECT,
- startSelect);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_POWER_MANAGEMENT_GO1_POWER_FORCE, 0);
-
- /* Perform ref calibration */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_perform_ref_calibration(Dev, &VhvSettings,
- &PhaseCal, 0);
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* Enable Minimum NON-APERTURE Spads */
- currentSpadIndex = 0;
- lastSpadIndex = currentSpadIndex;
- needAptSpads = 0;
- Status = enable_ref_spads(Dev,
- needAptSpads,
- Dev->Data.SpadData.RefGoodSpadMap,
- Dev->Data.SpadData.RefSpadEnables,
- spadArraySize,
- startSelect,
- currentSpadIndex,
- minimumSpadCount,
- &lastSpadIndex);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- currentSpadIndex = lastSpadIndex;
-
- Status = perform_ref_signal_measurement(Dev,
- &peakSignalRateRef);
- if ((Status == VL53L0X_ERROR_NONE) &&
- (peakSignalRateRef > targetRefRate)) {
- /* Signal rate measurement too high,
- * switch to APERTURE SPADs */
-
- for (index = 0; index < spadArraySize; index++)
- Dev->Data.SpadData.RefSpadEnables[index] = 0;
-
-
- /* Increment to the first APERTURE spad */
- while ((is_aperture(startSelect + currentSpadIndex)
- == 0) && (currentSpadIndex < maxSpadCount)) {
- currentSpadIndex++;
- }
-
- needAptSpads = 1;
-
- Status = enable_ref_spads(Dev,
- needAptSpads,
- Dev->Data.SpadData.RefGoodSpadMap,
- Dev->Data.SpadData.RefSpadEnables,
- spadArraySize,
- startSelect,
- currentSpadIndex,
- minimumSpadCount,
- &lastSpadIndex);
-
- if (Status == VL53L0X_ERROR_NONE) {
- currentSpadIndex = lastSpadIndex;
- Status = perform_ref_signal_measurement(Dev,
- &peakSignalRateRef);
-
- if ((Status == VL53L0X_ERROR_NONE) &&
- (peakSignalRateRef > targetRefRate)) {
- /* Signal rate still too high after
- * setting the minimum number of
- * APERTURE spads. Can do no more
- * therefore set the min number of
- * aperture spads as the result.
- */
- isApertureSpads_int = 1;
- refSpadCount_int = minimumSpadCount;
- }
- }
- } else {
- needAptSpads = 0;
- }
- }
-
- if ((Status == VL53L0X_ERROR_NONE) &&
- (peakSignalRateRef < targetRefRate)) {
- /* At this point, the minimum number of either aperture
- * or non-aperture spads have been set. Proceed to add
- * spads and perform measurements until the target
- * reference is reached.
- */
- isApertureSpads_int = needAptSpads;
- refSpadCount_int = minimumSpadCount;
-
- memcpy(lastSpadArray, Dev->Data.SpadData.RefSpadEnables,
- spadArraySize);
- lastSignalRateDiff = abs(peakSignalRateRef -
- targetRefRate);
- complete = 0;
-
- while (!complete) {
- get_next_good_spad(
- Dev->Data.SpadData.RefGoodSpadMap,
- spadArraySize, currentSpadIndex,
- &nextGoodSpad);
-
- if (nextGoodSpad == -1) {
- Status = VL53L0X_ERROR_REF_SPAD_INIT;
- break;
- }
-
- /* Cannot combine Aperture and Non-Aperture spads, so
- * ensure the current spad is of the correct type.
- */
- if (is_aperture((uint32_t)startSelect + nextGoodSpad) !=
- needAptSpads) {
- /* At this point we have enabled the maximum
- * number of Aperture spads.
- */
- complete = 1;
- break;
- }
-
- (refSpadCount_int)++;
-
- currentSpadIndex = nextGoodSpad;
- Status = enable_spad_bit(
- Dev->Data.SpadData.RefSpadEnables,
- spadArraySize, currentSpadIndex);
-
- if (Status == VL53L0X_ERROR_NONE) {
- currentSpadIndex++;
- /* Proceed to apply the additional spad and
- * perform measurement. */
- Status = set_ref_spad_map(Dev,
- Dev->Data.SpadData.RefSpadEnables);
- }
-
- if (Status != VL53L0X_ERROR_NONE)
- break;
-
- Status = perform_ref_signal_measurement(Dev,
- &peakSignalRateRef);
-
- if (Status != VL53L0X_ERROR_NONE)
- break;
-
- signalRateDiff = abs(peakSignalRateRef - targetRefRate);
-
- if (peakSignalRateRef > targetRefRate) {
- /* Select the spad map that provides the
- * measurement closest to the target rate,
- * either above or below it.
- */
- if (signalRateDiff > lastSignalRateDiff) {
- /* Previous spad map produced a closer
- * measurement, so choose this. */
- Status = set_ref_spad_map(Dev,
- lastSpadArray);
- memcpy(
- Dev->Data.SpadData.RefSpadEnables,
- lastSpadArray, spadArraySize);
-
- (refSpadCount_int)--;
- }
- complete = 1;
- } else {
- /* Continue to add spads */
- lastSignalRateDiff = signalRateDiff;
- memcpy(lastSpadArray,
- Dev->Data.SpadData.RefSpadEnables,
- spadArraySize);
- }
-
- } /* while */
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- *refSpadCount = refSpadCount_int;
- *isApertureSpads = isApertureSpads_int;
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, RefSpadsInitialised, 1);
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadCount, (uint8_t)(*refSpadCount));
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadType, *isApertureSpads);
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t last_spad_array[6];
+ uint8_t start_select = 0xB4;
+ uint32_t minimum_spad_count = 3;
+ uint32_t max_spad_count = 44;
+ uint32_t current_spad_index = 0;
+ uint32_t last_spad_index = 0;
+ int32_t next_good_spad = 0;
+ uint16_t target_ref_rate = 0x0A00; /* 20 MCPS in 9:7 format */
+ uint16_t peak_signal_rate_ref;
+ uint32_t need_apt_spads = 0;
+ uint32_t index = 0;
+ uint32_t spad_array_size = 6;
+ uint32_t signal_rate_diff = 0;
+ uint32_t last_signal_rate_diff = 0;
+ uint8_t complete = 0;
+ uint8_t vhv_settings = 0;
+ uint8_t phase_cal = 0;
+ uint32_t ref_spad_count_int = 0;
+ uint8_t is_aperture_spads_int = 0;
+
+ /*
+ * The reference SPAD initialization procedure determines the minimum
+ * amount of reference spads to be enables to achieve a target reference
+ * signal rate and should be performed once during initialization.
+ *
+ * Either aperture or non-aperture spads are applied but never both.
+ * Firstly non-aperture spads are set, begining with 5 spads, and
+ * increased one spad at a time until the closest measurement to the
+ * target rate is achieved.
+ *
+ * If the target rate is exceeded when 5 non-aperture spads are enabled,
+ * initialization is performed instead with aperture spads.
+ *
+ * When setting spads, a 'Good Spad Map' is applied.
+ *
+ * This procedure operates within a SPAD window of interest of a maximum
+ * 44 spads.
+ * The start point is currently fixed to 180, which lies towards the end
+ * of the non-aperture quadrant and runs in to the adjacent aperture
+ * quadrant.
+ */
+
+
+ target_ref_rate = PALDevDataGet(dev, targetRefRate);
+
+ /*
+ * Initialize Spad arrays.
+ * Currently the good spad map is initialised to 'All good'.
+ * This is a short term implementation. The good spad map will be
+ * provided as an input.
+ * Note that there are 6 bytes. Only the first 44 bits will be used to
+ * represent spads.
+ */
+ for (index = 0; index < spad_array_size; index++)
+ dev->Data.SpadData.RefSpadEnables[index] = 0;
+
+
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_DYNAMIC_SPAD_REF_EN_START_OFFSET, 0x00);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_DYNAMIC_SPAD_NUM_REQUESTED_REF_SPAD, 0x2C);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_REF_EN_START_SELECT,
+ start_select);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_POWER_MANAGEMENT_GO1_POWER_FORCE, 0);
+
+ /* Perform ref calibration */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_perform_ref_calibration(dev, &vhv_settings,
+ &phase_cal, 0);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Enable Minimum NON-APERTURE Spads */
+ current_spad_index = 0;
+ last_spad_index = current_spad_index;
+ need_apt_spads = 0;
+ status = enable_ref_spads(dev,
+ need_apt_spads,
+ dev->Data.SpadData.RefGoodSpadMap,
+ dev->Data.SpadData.RefSpadEnables,
+ spad_array_size,
+ start_select,
+ current_spad_index,
+ minimum_spad_count,
+ &last_spad_index);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ current_spad_index = last_spad_index;
+
+ status = perform_ref_signal_measurement(dev,
+ &peak_signal_rate_ref);
+ if ((status == VL53L0X_ERROR_NONE) &&
+ (peak_signal_rate_ref > target_ref_rate)) {
+ /* Signal rate measurement too high,
+ * switch to APERTURE SPADs */
+
+ for (index = 0; index < spad_array_size; index++)
+ dev->Data.SpadData.RefSpadEnables[index] = 0;
+
+
+ /* Increment to the first APERTURE spad */
+ while ((is_aperture(start_select + current_spad_index)
+ == 0) && (current_spad_index < max_spad_count)) {
+ current_spad_index++;
+ }
+
+ need_apt_spads = 1;
+
+ status = enable_ref_spads(dev,
+ need_apt_spads,
+ dev->Data.SpadData.RefGoodSpadMap,
+ dev->Data.SpadData.RefSpadEnables,
+ spad_array_size,
+ start_select,
+ current_spad_index,
+ minimum_spad_count,
+ &last_spad_index);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ current_spad_index = last_spad_index;
+ status = perform_ref_signal_measurement(dev,
+ &peak_signal_rate_ref);
+
+ if ((status == VL53L0X_ERROR_NONE) &&
+ (peak_signal_rate_ref > target_ref_rate)) {
+ /* Signal rate still too high after
+ * setting the minimum number of
+ * APERTURE spads. Can do no more
+ * therefore set the min number of
+ * aperture spads as the result.
+ */
+ is_aperture_spads_int = 1;
+ ref_spad_count_int = minimum_spad_count;
+ }
+ }
+ } else {
+ need_apt_spads = 0;
+ }
+ }
+
+ if ((status == VL53L0X_ERROR_NONE) &&
+ (peak_signal_rate_ref < target_ref_rate)) {
+ /* At this point, the minimum number of either aperture
+ * or non-aperture spads have been set. Proceed to add
+ * spads and perform measurements until the target
+ * reference is reached.
+ */
+ is_aperture_spads_int = need_apt_spads;
+ ref_spad_count_int = minimum_spad_count;
+
+ memcpy(last_spad_array, dev->Data.SpadData.RefSpadEnables,
+ spad_array_size);
+ last_signal_rate_diff = abs(peak_signal_rate_ref -
+ target_ref_rate);
+ complete = 0;
+
+ while (!complete) {
+ get_next_good_spad(
+ dev->Data.SpadData.RefGoodSpadMap,
+ spad_array_size, current_spad_index,
+ &next_good_spad);
+
+ if (next_good_spad == -1) {
+ status = VL53L0X_ERROR_REF_SPAD_INIT;
+ break;
+ }
+
+ /* Cannot combine Aperture and Non-Aperture spads, so
+ * ensure the current spad is of the correct type.
+ */
+ if (is_aperture((uint32_t)start_select + next_good_spad) !=
+ need_apt_spads) {
+ /* At this point we have enabled the maximum
+ * number of Aperture spads.
+ */
+ complete = 1;
+ break;
+ }
+
+ (ref_spad_count_int)++;
+
+ current_spad_index = next_good_spad;
+ status = enable_spad_bit(
+ dev->Data.SpadData.RefSpadEnables,
+ spad_array_size, current_spad_index);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ current_spad_index++;
+ /* Proceed to apply the additional spad and
+ * perform measurement. */
+ status = set_ref_spad_map(dev,
+ dev->Data.SpadData.RefSpadEnables);
+ }
+
+ if (status != VL53L0X_ERROR_NONE)
+ break;
+
+ status = perform_ref_signal_measurement(dev,
+ &peak_signal_rate_ref);
+
+ if (status != VL53L0X_ERROR_NONE)
+ break;
+
+ signal_rate_diff = abs(peak_signal_rate_ref - target_ref_rate);
+
+ if (peak_signal_rate_ref > target_ref_rate) {
+ /* Select the spad map that provides the
+ * measurement closest to the target rate,
+ * either above or below it.
+ */
+ if (signal_rate_diff > last_signal_rate_diff) {
+ /* Previous spad map produced a closer
+ * measurement, so choose this. */
+ status = set_ref_spad_map(dev,
+ last_spad_array);
+ memcpy(
+ dev->Data.SpadData.RefSpadEnables,
+ last_spad_array, spad_array_size);
+
+ (ref_spad_count_int)--;
+ }
+ complete = 1;
+ } else {
+ /* Continue to add spads */
+ last_signal_rate_diff = signal_rate_diff;
+ memcpy(last_spad_array,
+ dev->Data.SpadData.RefSpadEnables,
+ spad_array_size);
+ }
+
+ } /* while */
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ *ref_spad_count = ref_spad_count_int;
+ *is_aperture_spads = is_aperture_spads_int;
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, RefSpadsInitialised, 1);
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadCount, (uint8_t)(*ref_spad_count));
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadType, *is_aperture_spads);
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_set_reference_spads(VL53L0X_DEV Dev,
- uint32_t count, uint8_t isApertureSpads)
+VL53L0X_Error VL53L0X::vl53l0x_set_reference_spads(VL53L0X_DEV dev,
+ uint32_t count, uint8_t is_aperture_spads)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint32_t currentSpadIndex = 0;
- uint8_t startSelect = 0xB4;
- uint32_t spadArraySize = 6;
- uint32_t maxSpadCount = 44;
- uint32_t lastSpadIndex;
- uint32_t index;
-
- /*
- * This function applies a requested number of reference spads, either
- * aperture or
- * non-aperture, as requested.
- * The good spad map will be applied.
- */
-
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_DYNAMIC_SPAD_REF_EN_START_OFFSET, 0x00);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_DYNAMIC_SPAD_NUM_REQUESTED_REF_SPAD, 0x2C);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_GLOBAL_CONFIG_REF_EN_START_SELECT,
- startSelect);
-
- for (index = 0; index < spadArraySize; index++)
- Dev->Data.SpadData.RefSpadEnables[index] = 0;
-
- if (isApertureSpads) {
- /* Increment to the first APERTURE spad */
- while ((is_aperture(startSelect + currentSpadIndex) == 0) &&
- (currentSpadIndex < maxSpadCount)) {
- currentSpadIndex++;
- }
- }
- Status = enable_ref_spads(Dev,
- isApertureSpads,
- Dev->Data.SpadData.RefGoodSpadMap,
- Dev->Data.SpadData.RefSpadEnables,
- spadArraySize,
- startSelect,
- currentSpadIndex,
- count,
- &lastSpadIndex);
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, RefSpadsInitialised, 1);
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadCount, (uint8_t)(count));
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadType, isApertureSpads);
- }
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint32_t current_spad_index = 0;
+ uint8_t start_select = 0xB4;
+ uint32_t spad_array_size = 6;
+ uint32_t max_spad_count = 44;
+ uint32_t last_spad_index;
+ uint32_t index;
+
+ /*
+ * This function applies a requested number of reference spads, either
+ * aperture or
+ * non-aperture, as requested.
+ * The good spad map will be applied.
+ */
+
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_DYNAMIC_SPAD_REF_EN_START_OFFSET, 0x00);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_DYNAMIC_SPAD_NUM_REQUESTED_REF_SPAD, 0x2C);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_GLOBAL_CONFIG_REF_EN_START_SELECT,
+ start_select);
+
+ for (index = 0; index < spad_array_size; index++)
+ dev->Data.SpadData.RefSpadEnables[index] = 0;
+
+ if (is_aperture_spads) {
+ /* Increment to the first APERTURE spad */
+ while ((is_aperture(start_select + current_spad_index) == 0) &&
+ (current_spad_index < max_spad_count)) {
+ current_spad_index++;
+ }
+ }
+ status = enable_ref_spads(dev,
+ is_aperture_spads,
+ dev->Data.SpadData.RefGoodSpadMap,
+ dev->Data.SpadData.RefSpadEnables,
+ spad_array_size,
+ start_select,
+ current_spad_index,
+ count,
+ &last_spad_index);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, RefSpadsInitialised, 1);
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadCount, (uint8_t)(count));
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadType, is_aperture_spads);
+ }
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_WaitDeviceBooted(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_wait_device_booted(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NOT_IMPLEMENTED;
- LOG_FUNCTION_START("");
-
- /* not implemented on VL53L0X */
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NOT_IMPLEMENTED;
+ LOG_FUNCTION_START("");
+
+ /* not implemented on VL53L0X */
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_PerformRefCalibration(VL53L0X_DEV Dev, uint8_t *pVhvSettings,
- uint8_t *pPhaseCal)
+VL53L0X_Error VL53L0X::vl53l0x_perform_ref_calibration(VL53L0X_DEV dev, uint8_t *p_vhv_settings,
+ uint8_t *p_phase_cal)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_perform_ref_calibration(Dev, pVhvSettings,
- pPhaseCal, 1);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_perform_ref_calibration(dev, p_vhv_settings,
+ p_phase_cal, 1);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_PerformRefSpadManagement(VL53L0X_DEV Dev,
- uint32_t *refSpadCount, uint8_t *isApertureSpads)
+VL53L0X_Error VL53L0X::vl53l0x_perform_ref_spad_management(VL53L0X_DEV dev,
+ uint32_t *ref_spad_count, uint8_t *is_aperture_spads)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_perform_ref_spad_management(Dev, refSpadCount,
- isApertureSpads);
-
- LOG_FUNCTION_END(Status);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_perform_ref_spad_management(dev, ref_spad_count,
+ is_aperture_spads);
+
+ LOG_FUNCTION_END(status);
+
+ return status;
}
/* Group PAL Init Functions */
-VL53L0X_Error VL53L0X::VL53L0X_SetDeviceAddress(VL53L0X_DEV Dev, uint8_t DeviceAddress)
+VL53L0X_Error VL53L0X::vl53l0x_set_device_address(VL53L0X_DEV dev, uint8_t device_address)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_I2C_SLAVE_DEVICE_ADDRESS,
- DeviceAddress / 2);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_I2C_SLAVE_DEVICE_ADDRESS,
+ device_address / 2);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetGpioConfig(VL53L0X_DEV Dev, uint8_t Pin,
- VL53L0X_DeviceModes DeviceMode, VL53L0X_GpioFunctionality Functionality,
- VL53L0X_InterruptPolarity Polarity)
+VL53L0X_Error VL53L0X::vl53l0x_set_gpio_config(VL53L0X_DEV dev, uint8_t pin,
+ VL53L0X_DeviceModes device_mode, VL53L0X_GpioFunctionality functionality,
+ VL53L0X_InterruptPolarity polarity)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t data;
-
- LOG_FUNCTION_START("");
-
- if (Pin != 0) {
- Status = VL53L0X_ERROR_GPIO_NOT_EXISTING;
- } else if (DeviceMode == VL53L0X_DEVICEMODE_GPIO_DRIVE) {
- if (Polarity == VL53L0X_INTERRUPTPOLARITY_LOW)
- data = 0x10;
- else
- data = 1;
-
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_GPIO_HV_MUX_ACTIVE_HIGH, data);
-
- } else if (DeviceMode == VL53L0X_DEVICEMODE_GPIO_OSC) {
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x00);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0x80, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x85, 0x02);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x04);
- Status |= VL53L0X_WrByte(Dev, 0xcd, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0xcc, 0x11);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x07);
- Status |= VL53L0X_WrByte(Dev, 0xbe, 0x00);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x06);
- Status |= VL53L0X_WrByte(Dev, 0xcc, 0x09);
-
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x00);
- Status |= VL53L0X_WrByte(Dev, 0xff, 0x01);
- Status |= VL53L0X_WrByte(Dev, 0x00, 0x00);
-
- } else {
-
- if (Status == VL53L0X_ERROR_NONE) {
- switch (Functionality) {
- case VL53L0X_GPIOFUNCTIONALITY_OFF:
- data = 0x00;
- break;
- case VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW:
- data = 0x01;
- break;
- case VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH:
- data = 0x02;
- break;
- case VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT:
- data = 0x03;
- break;
- case VL53L0X_GPIOFUNCTIONALITY_NEW_MEASURE_READY:
- data = 0x04;
- break;
- default:
- Status =
- VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED;
- }
- }
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSTEM_INTERRUPT_CONFIG_GPIO, data);
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (Polarity == VL53L0X_INTERRUPTPOLARITY_LOW)
- data = 0;
- else
- data = (uint8_t)(1 << 4);
-
- Status = VL53L0X_UpdateByte(Dev,
- VL53L0X_REG_GPIO_HV_MUX_ACTIVE_HIGH, 0xEF, data);
- }
-
- if (Status == VL53L0X_ERROR_NONE)
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- Pin0GpioFunctionality, Functionality);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_ClearInterruptMask(Dev, 0);
-
- }
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t data;
+
+ LOG_FUNCTION_START("");
+
+ if (pin != 0) {
+ status = VL53L0X_ERROR_GPIO_NOT_EXISTING;
+ } else if (device_mode == VL53L0X_DEVICEMODE_GPIO_DRIVE) {
+ if (polarity == VL53L0X_INTERRUPTPOLARITY_LOW)
+ data = 0x10;
+ else
+ data = 1;
+
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_GPIO_HV_MUX_ACTIVE_HIGH, data);
+
+ } else if (device_mode == VL53L0X_DEVICEMODE_GPIO_OSC) {
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x00);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x00);
+ status |= vl53l0x_write_byte(dev, 0x80, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x85, 0x02);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x04);
+ status |= vl53l0x_write_byte(dev, 0xcd, 0x00);
+ status |= vl53l0x_write_byte(dev, 0xcc, 0x11);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x07);
+ status |= vl53l0x_write_byte(dev, 0xbe, 0x00);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x06);
+ status |= vl53l0x_write_byte(dev, 0xcc, 0x09);
+
+ status |= vl53l0x_write_byte(dev, 0xff, 0x00);
+ status |= vl53l0x_write_byte(dev, 0xff, 0x01);
+ status |= vl53l0x_write_byte(dev, 0x00, 0x00);
+
+ } else {
+
+ if (status == VL53L0X_ERROR_NONE) {
+ switch (functionality) {
+ case VL53L0X_GPIOFUNCTIONALITY_OFF:
+ data = 0x00;
+ break;
+ case VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_LOW:
+ data = 0x01;
+ break;
+ case VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_HIGH:
+ data = 0x02;
+ break;
+ case VL53L0X_GPIOFUNCTIONALITY_THRESHOLD_CROSSED_OUT:
+ data = 0x03;
+ break;
+ case VL53L0X_GPIOFUNCTIONALITY_NEW_MEASURE_READY:
+ data = 0x04;
+ break;
+ default:
+ status =
+ VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED;
+ }
+ }
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSTEM_INTERRUPT_CONFIG_GPIO, data);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (polarity == VL53L0X_INTERRUPTPOLARITY_LOW)
+ data = 0;
+ else
+ data = (uint8_t)(1 << 4);
+
+ status = vl53l0x_update_byte(dev,
+ VL53L0X_REG_GPIO_HV_MUX_ACTIVE_HIGH, 0xEF, data);
+ }
+
+ if (status == VL53L0X_ERROR_NONE)
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ Pin0GpioFunctionality, functionality);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_clear_interrupt_mask(dev, 0);
+
+ }
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetFractionEnable(VL53L0X_DEV Dev, uint8_t *pEnabled)
+VL53L0X_Error VL53L0X::vl53l0x_get_fraction_enable(VL53L0X_DEV dev, uint8_t *p_enabled)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_SYSTEM_RANGE_CONFIG, pEnabled);
-
- if (Status == VL53L0X_ERROR_NONE)
- *pEnabled = (*pEnabled & 1);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_SYSTEM_RANGE_CONFIG, p_enabled);
+
+ if (status == VL53L0X_ERROR_NONE)
+ *p_enabled = (*p_enabled & 1);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-uint16_t VL53L0X::VL53L0X_encode_timeout(uint32_t timeout_macro_clks)
+uint16_t VL53L0X::vl53l0x_encode_timeout(uint32_t timeout_macro_clks)
{
- /*!
- * Encode timeout in macro periods in (LSByte * 2^MSByte) + 1 format
- */
-
- uint16_t encoded_timeout = 0;
- uint32_t ls_byte = 0;
- uint16_t ms_byte = 0;
-
- if (timeout_macro_clks > 0) {
- ls_byte = timeout_macro_clks - 1;
-
- while ((ls_byte & 0xFFFFFF00) > 0) {
- ls_byte = ls_byte >> 1;
- ms_byte++;
- }
-
- encoded_timeout = (ms_byte << 8)
- + (uint16_t) (ls_byte & 0x000000FF);
- }
-
- return encoded_timeout;
+ /*!
+ * Encode timeout in macro periods in (LSByte * 2^MSByte) + 1 format
+ */
+
+ uint16_t encoded_timeout = 0;
+ uint32_t ls_byte = 0;
+ uint16_t ms_byte = 0;
+
+ if (timeout_macro_clks > 0) {
+ ls_byte = timeout_macro_clks - 1;
+
+ while ((ls_byte & 0xFFFFFF00) > 0) {
+ ls_byte = ls_byte >> 1;
+ ms_byte++;
+ }
+
+ encoded_timeout = (ms_byte << 8)
+ + (uint16_t)(ls_byte & 0x000000FF);
+ }
+
+ return encoded_timeout;
}
-VL53L0X_Error VL53L0X::set_sequence_step_timeout(VL53L0X_DEV Dev,
- VL53L0X_SequenceStepId SequenceStepId,
- uint32_t TimeOutMicroSecs)
+VL53L0X_Error VL53L0X::set_sequence_step_timeout(VL53L0X_DEV dev,
+ VL53L0X_SequenceStepId sequence_step_id,
+ uint32_t timeout_micro_secs)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t CurrentVCSELPulsePeriodPClk;
- uint8_t MsrcEncodedTimeOut;
- uint16_t PreRangeEncodedTimeOut;
- uint16_t PreRangeTimeOutMClks;
- uint16_t MsrcRangeTimeOutMClks;
- uint32_t FinalRangeTimeOutMClks;
- uint16_t FinalRangeEncodedTimeOut;
- VL53L0X_SchedulerSequenceSteps_t SchedulerSequenceSteps;
-
- if ((SequenceStepId == VL53L0X_SEQUENCESTEP_TCC) ||
- (SequenceStepId == VL53L0X_SEQUENCESTEP_DSS) ||
- (SequenceStepId == VL53L0X_SEQUENCESTEP_MSRC)) {
-
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
-
- if (Status == VL53L0X_ERROR_NONE) {
- MsrcRangeTimeOutMClks = VL53L0X_calc_timeout_mclks(Dev,
- TimeOutMicroSecs,
- (uint8_t)CurrentVCSELPulsePeriodPClk);
-
- if (MsrcRangeTimeOutMClks > 256)
- MsrcEncodedTimeOut = 255;
- else
- MsrcEncodedTimeOut =
- (uint8_t)MsrcRangeTimeOutMClks - 1;
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- LastEncodedTimeout,
- MsrcEncodedTimeOut);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_MSRC_CONFIG_TIMEOUT_MACROP,
- MsrcEncodedTimeOut);
- }
- } else {
-
- if (SequenceStepId == VL53L0X_SEQUENCESTEP_PRE_RANGE) {
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
- PreRangeTimeOutMClks =
- VL53L0X_calc_timeout_mclks(Dev,
- TimeOutMicroSecs,
- (uint8_t)CurrentVCSELPulsePeriodPClk);
- PreRangeEncodedTimeOut = VL53L0X_encode_timeout(
- PreRangeTimeOutMClks);
-
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev,
- LastEncodedTimeout,
- PreRangeEncodedTimeOut);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_WrWord(Dev,
- VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI,
- PreRangeEncodedTimeOut);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- PreRangeTimeoutMicroSecs,
- TimeOutMicroSecs);
- }
- } else if (SequenceStepId == VL53L0X_SEQUENCESTEP_FINAL_RANGE) {
-
- /* For the final range timeout, the pre-range timeout
- * must be added. To do this both final and pre-range
- * timeouts must be expressed in macro periods MClks
- * because they have different vcsel periods.
- */
-
- VL53L0X_GetSequenceStepEnables(Dev,
- &SchedulerSequenceSteps);
- PreRangeTimeOutMClks = 0;
- if (SchedulerSequenceSteps.PreRangeOn) {
-
- /* Retrieve PRE-RANGE VCSEL Period */
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &CurrentVCSELPulsePeriodPClk);
-
- /* Retrieve PRE-RANGE Timeout in Macro periods
- * (MCLKS) */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdWord(Dev, 0x51,
- &PreRangeEncodedTimeOut);
- PreRangeTimeOutMClks =
- VL53L0X_decode_timeout(
- PreRangeEncodedTimeOut);
- }
- }
-
- /* Calculate FINAL RANGE Timeout in Macro Periods
- * (MCLKS) and add PRE-RANGE value
- */
- if (Status == VL53L0X_ERROR_NONE) {
-
- Status = VL53L0X_GetVcselPulsePeriod(Dev,
- VL53L0X_VCSEL_PERIOD_FINAL_RANGE,
- &CurrentVCSELPulsePeriodPClk);
- }
- if (Status == VL53L0X_ERROR_NONE) {
-
- FinalRangeTimeOutMClks =
- VL53L0X_calc_timeout_mclks(Dev,
- TimeOutMicroSecs,
- (uint8_t) CurrentVCSELPulsePeriodPClk);
-
- FinalRangeTimeOutMClks += PreRangeTimeOutMClks;
-
- FinalRangeEncodedTimeOut =
- VL53L0X_encode_timeout(FinalRangeTimeOutMClks);
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_WrWord(Dev, 0x71,
- FinalRangeEncodedTimeOut);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- FinalRangeTimeoutMicroSecs,
- TimeOutMicroSecs);
- }
- }
- } else
- Status = VL53L0X_ERROR_INVALID_PARAMS;
-
- }
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t current_vcsel_pulse_period_p_clk;
+ uint8_t msrc_encoded_time_out;
+ uint16_t pre_range_encoded_time_out;
+ uint16_t pre_range_time_out_m_clks;
+ uint16_t msrc_range_time_out_m_clks;
+ uint32_t final_range_time_out_m_clks;
+ uint16_t final_range_encoded_time_out;
+ VL53L0X_SchedulerSequenceSteps_t scheduler_sequence_steps;
+
+ if ((sequence_step_id == VL53L0X_SEQUENCESTEP_TCC) ||
+ (sequence_step_id == VL53L0X_SEQUENCESTEP_DSS) ||
+ (sequence_step_id == VL53L0X_SEQUENCESTEP_MSRC)) {
+
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ msrc_range_time_out_m_clks = vl53l0x_calc_timeout_mclks(dev,
+ timeout_micro_secs,
+ (uint8_t)current_vcsel_pulse_period_p_clk);
+
+ if (msrc_range_time_out_m_clks > 256)
+ msrc_encoded_time_out = 255;
+ else
+ msrc_encoded_time_out =
+ (uint8_t)msrc_range_time_out_m_clks - 1;
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ LastEncodedTimeout,
+ msrc_encoded_time_out);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_MSRC_CONFIG_TIMEOUT_MACROP,
+ msrc_encoded_time_out);
+ }
+ } else {
+
+ if (sequence_step_id == VL53L0X_SEQUENCESTEP_PRE_RANGE) {
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+ pre_range_time_out_m_clks =
+ vl53l0x_calc_timeout_mclks(dev,
+ timeout_micro_secs,
+ (uint8_t)current_vcsel_pulse_period_p_clk);
+ pre_range_encoded_time_out = vl53l0x_encode_timeout(
+ pre_range_time_out_m_clks);
+
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev,
+ LastEncodedTimeout,
+ pre_range_encoded_time_out);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_write_word(dev,
+ VL53L0X_REG_PRE_RANGE_CONFIG_TIMEOUT_MACROP_HI,
+ pre_range_encoded_time_out);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ PreRangeTimeoutMicroSecs,
+ timeout_micro_secs);
+ }
+ } else if (sequence_step_id == VL53L0X_SEQUENCESTEP_FINAL_RANGE) {
+
+ /* For the final range timeout, the pre-range timeout
+ * must be added. To do this both final and pre-range
+ * timeouts must be expressed in macro periods MClks
+ * because they have different vcsel periods.
+ */
+
+ vl53l0x_get_sequence_step_enables(dev,
+ &scheduler_sequence_steps);
+ pre_range_time_out_m_clks = 0;
+ if (scheduler_sequence_steps.PreRangeOn) {
+
+ /* Retrieve PRE-RANGE VCSEL Period */
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+
+ /* Retrieve PRE-RANGE Timeout in Macro periods
+ * (MCLKS) */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_word(dev, 0x51,
+ &pre_range_encoded_time_out);
+ pre_range_time_out_m_clks =
+ vl53l0x_decode_timeout(
+ pre_range_encoded_time_out);
+ }
+ }
+
+ /* Calculate FINAL RANGE Timeout in Macro Periods
+ * (MCLKS) and add PRE-RANGE value
+ */
+ if (status == VL53L0X_ERROR_NONE) {
+
+ status = vl53l0x_get_vcsel_pulse_period(dev,
+ VL53L0X_VCSEL_PERIOD_FINAL_RANGE,
+ ¤t_vcsel_pulse_period_p_clk);
+ }
+ if (status == VL53L0X_ERROR_NONE) {
+
+ final_range_time_out_m_clks =
+ vl53l0x_calc_timeout_mclks(dev,
+ timeout_micro_secs,
+ (uint8_t) current_vcsel_pulse_period_p_clk);
+
+ final_range_time_out_m_clks += pre_range_time_out_m_clks;
+
+ final_range_encoded_time_out =
+ vl53l0x_encode_timeout(final_range_time_out_m_clks);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_write_word(dev, 0x71,
+ final_range_encoded_time_out);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ FinalRangeTimeoutMicroSecs,
+ timeout_micro_secs);
+ }
+ }
+ } else
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+
+ }
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_set_measurement_timing_budget_micro_seconds(VL53L0X_DEV Dev,
- uint32_t MeasurementTimingBudgetMicroSeconds)
+VL53L0X_Error VL53L0X::wrapped_vl53l0x_set_measurement_timing_budget_micro_seconds(VL53L0X_DEV dev,
+ uint32_t measurement_timing_budget_micro_seconds)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint32_t FinalRangeTimingBudgetMicroSeconds;
- VL53L0X_SchedulerSequenceSteps_t SchedulerSequenceSteps;
- uint32_t MsrcDccTccTimeoutMicroSeconds = 2000;
- uint32_t StartOverheadMicroSeconds = 1910;
- uint32_t EndOverheadMicroSeconds = 960;
- uint32_t MsrcOverheadMicroSeconds = 660;
- uint32_t TccOverheadMicroSeconds = 590;
- uint32_t DssOverheadMicroSeconds = 690;
- uint32_t PreRangeOverheadMicroSeconds = 660;
- uint32_t FinalRangeOverheadMicroSeconds = 550;
- uint32_t PreRangeTimeoutMicroSeconds = 0;
- uint32_t cMinTimingBudgetMicroSeconds = 20000;
- uint32_t SubTimeout = 0;
-
- LOG_FUNCTION_START("");
-
- if (MeasurementTimingBudgetMicroSeconds
- < cMinTimingBudgetMicroSeconds) {
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- return Status;
- }
-
- FinalRangeTimingBudgetMicroSeconds =
- MeasurementTimingBudgetMicroSeconds -
- (StartOverheadMicroSeconds + EndOverheadMicroSeconds);
-
- Status = VL53L0X_GetSequenceStepEnables(Dev, &SchedulerSequenceSteps);
-
- if (Status == VL53L0X_ERROR_NONE &&
- (SchedulerSequenceSteps.TccOn ||
- SchedulerSequenceSteps.MsrcOn ||
- SchedulerSequenceSteps.DssOn)) {
-
- /* TCC, MSRC and DSS all share the same timeout */
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_MSRC,
- &MsrcDccTccTimeoutMicroSeconds);
-
- /* Subtract the TCC, MSRC and DSS timeouts if they are
- * enabled. */
-
- if (Status != VL53L0X_ERROR_NONE)
- return Status;
-
- /* TCC */
- if (SchedulerSequenceSteps.TccOn) {
-
- SubTimeout = MsrcDccTccTimeoutMicroSeconds
- + TccOverheadMicroSeconds;
-
- if (SubTimeout <
- FinalRangeTimingBudgetMicroSeconds) {
- FinalRangeTimingBudgetMicroSeconds -=
- SubTimeout;
- } else {
- /* Requested timeout too big. */
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
-
- if (Status != VL53L0X_ERROR_NONE) {
- LOG_FUNCTION_END(Status);
- return Status;
- }
-
- /* DSS */
- if (SchedulerSequenceSteps.DssOn) {
-
- SubTimeout = 2 * (MsrcDccTccTimeoutMicroSeconds +
- DssOverheadMicroSeconds);
-
- if (SubTimeout < FinalRangeTimingBudgetMicroSeconds) {
- FinalRangeTimingBudgetMicroSeconds
- -= SubTimeout;
- } else {
- /* Requested timeout too big. */
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- } else if (SchedulerSequenceSteps.MsrcOn) {
- /* MSRC */
- SubTimeout = MsrcDccTccTimeoutMicroSeconds +
- MsrcOverheadMicroSeconds;
-
- if (SubTimeout < FinalRangeTimingBudgetMicroSeconds) {
- FinalRangeTimingBudgetMicroSeconds
- -= SubTimeout;
- } else {
- /* Requested timeout too big. */
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
-
- }
-
- if (Status != VL53L0X_ERROR_NONE) {
- LOG_FUNCTION_END(Status);
- return Status;
- }
-
- if (SchedulerSequenceSteps.PreRangeOn) {
-
- /* Subtract the Pre-range timeout if enabled. */
-
- Status = get_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_PRE_RANGE,
- &PreRangeTimeoutMicroSeconds);
-
- SubTimeout = PreRangeTimeoutMicroSeconds +
- PreRangeOverheadMicroSeconds;
-
- if (SubTimeout < FinalRangeTimingBudgetMicroSeconds) {
- FinalRangeTimingBudgetMicroSeconds -= SubTimeout;
- } else {
- /* Requested timeout too big. */
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
-
-
- if (Status == VL53L0X_ERROR_NONE &&
- SchedulerSequenceSteps.FinalRangeOn) {
-
- FinalRangeTimingBudgetMicroSeconds -=
- FinalRangeOverheadMicroSeconds;
-
- /* Final Range Timeout
- * Note that the final range timeout is determined by the timing
- * budget and the sum of all other timeouts within the sequence.
- * If there is no room for the final range timeout, then an error
- * will be set. Otherwise the remaining time will be applied to
- * the final range.
- */
- Status = set_sequence_step_timeout(Dev,
- VL53L0X_SEQUENCESTEP_FINAL_RANGE,
- FinalRangeTimingBudgetMicroSeconds);
-
- VL53L0X_SETPARAMETERFIELD(Dev,
- MeasurementTimingBudgetMicroSeconds,
- MeasurementTimingBudgetMicroSeconds);
- }
-
- LOG_FUNCTION_END(Status);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint32_t final_range_timing_budget_micro_seconds;
+ VL53L0X_SchedulerSequenceSteps_t scheduler_sequence_steps;
+ uint32_t msrc_dcc_tcc_timeout_micro_seconds = 2000;
+ uint32_t start_overhead_micro_seconds = 1910;
+ uint32_t end_overhead_micro_seconds = 960;
+ uint32_t msrc_overhead_micro_seconds = 660;
+ uint32_t tcc_overhead_micro_seconds = 590;
+ uint32_t dss_overhead_micro_seconds = 690;
+ uint32_t pre_range_overhead_micro_seconds = 660;
+ uint32_t final_range_overhead_micro_seconds = 550;
+ uint32_t pre_range_timeout_micro_seconds = 0;
+ uint32_t c_min_timing_budget_micro_seconds = 20000;
+ uint32_t sub_timeout = 0;
+
+ LOG_FUNCTION_START("");
+
+ if (measurement_timing_budget_micro_seconds
+ < c_min_timing_budget_micro_seconds) {
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ return status;
+ }
+
+ final_range_timing_budget_micro_seconds =
+ measurement_timing_budget_micro_seconds -
+ (start_overhead_micro_seconds + end_overhead_micro_seconds);
+
+ status = vl53l0x_get_sequence_step_enables(dev, &scheduler_sequence_steps);
+
+ if (status == VL53L0X_ERROR_NONE &&
+ (scheduler_sequence_steps.TccOn ||
+ scheduler_sequence_steps.MsrcOn ||
+ scheduler_sequence_steps.DssOn)) {
+
+ /* TCC, MSRC and DSS all share the same timeout */
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_MSRC,
+ &msrc_dcc_tcc_timeout_micro_seconds);
+
+ /* Subtract the TCC, MSRC and DSS timeouts if they are
+ * enabled. */
+
+ if (status != VL53L0X_ERROR_NONE)
+ return status;
+
+ /* TCC */
+ if (scheduler_sequence_steps.TccOn) {
+
+ sub_timeout = msrc_dcc_tcc_timeout_micro_seconds
+ + tcc_overhead_micro_seconds;
+
+ if (sub_timeout <
+ final_range_timing_budget_micro_seconds) {
+ final_range_timing_budget_micro_seconds -=
+ sub_timeout;
+ } else {
+ /* Requested timeout too big. */
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+
+ if (status != VL53L0X_ERROR_NONE) {
+ LOG_FUNCTION_END(status);
+ return status;
+ }
+
+ /* DSS */
+ if (scheduler_sequence_steps.DssOn) {
+
+ sub_timeout = 2 * (msrc_dcc_tcc_timeout_micro_seconds +
+ dss_overhead_micro_seconds);
+
+ if (sub_timeout < final_range_timing_budget_micro_seconds) {
+ final_range_timing_budget_micro_seconds
+ -= sub_timeout;
+ } else {
+ /* Requested timeout too big. */
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ } else if (scheduler_sequence_steps.MsrcOn) {
+ /* MSRC */
+ sub_timeout = msrc_dcc_tcc_timeout_micro_seconds +
+ msrc_overhead_micro_seconds;
+
+ if (sub_timeout < final_range_timing_budget_micro_seconds) {
+ final_range_timing_budget_micro_seconds
+ -= sub_timeout;
+ } else {
+ /* Requested timeout too big. */
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+
+ }
+
+ if (status != VL53L0X_ERROR_NONE) {
+ LOG_FUNCTION_END(status);
+ return status;
+ }
+
+ if (scheduler_sequence_steps.PreRangeOn) {
+
+ /* Subtract the Pre-range timeout if enabled. */
+
+ status = get_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_PRE_RANGE,
+ &pre_range_timeout_micro_seconds);
+
+ sub_timeout = pre_range_timeout_micro_seconds +
+ pre_range_overhead_micro_seconds;
+
+ if (sub_timeout < final_range_timing_budget_micro_seconds) {
+ final_range_timing_budget_micro_seconds -= sub_timeout;
+ } else {
+ /* Requested timeout too big. */
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+
+
+ if (status == VL53L0X_ERROR_NONE &&
+ scheduler_sequence_steps.FinalRangeOn) {
+
+ final_range_timing_budget_micro_seconds -=
+ final_range_overhead_micro_seconds;
+
+ /* Final Range Timeout
+ * Note that the final range timeout is determined by the timing
+ * budget and the sum of all other timeouts within the sequence.
+ * If there is no room for the final range timeout, then an error
+ * will be set. Otherwise the remaining time will be applied to
+ * the final range.
+ */
+ status = set_sequence_step_timeout(dev,
+ VL53L0X_SEQUENCESTEP_FINAL_RANGE,
+ final_range_timing_budget_micro_seconds);
+
+ VL53L0X_SETPARAMETERFIELD(dev,
+ MeasurementTimingBudgetMicroSeconds,
+ measurement_timing_budget_micro_seconds);
+ }
+
+ LOG_FUNCTION_END(status);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetMeasurementTimingBudgetMicroSeconds(VL53L0X_DEV Dev,
- uint32_t MeasurementTimingBudgetMicroSeconds)
+VL53L0X_Error VL53L0X::vl53l0x_set_measurement_timing_budget_micro_seconds(VL53L0X_DEV dev,
+ uint32_t measurement_timing_budget_micro_seconds)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_set_measurement_timing_budget_micro_seconds(Dev,
- MeasurementTimingBudgetMicroSeconds);
-
- LOG_FUNCTION_END(Status);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = wrapped_vl53l0x_set_measurement_timing_budget_micro_seconds(dev,
+ measurement_timing_budget_micro_seconds);
+
+ LOG_FUNCTION_END(status);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetSequenceStepEnable(VL53L0X_DEV Dev,
- VL53L0X_SequenceStepId SequenceStepId, uint8_t SequenceStepEnabled)
+VL53L0X_Error VL53L0X::vl53l0x_set_sequence_step_enable(VL53L0X_DEV dev,
+ VL53L0X_SequenceStepId sequence_step_id, uint8_t sequence_step_enabled)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t SequenceConfig = 0;
- uint8_t SequenceConfigNew = 0;
- uint32_t MeasurementTimingBudgetMicroSeconds;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_RdByte(Dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
- &SequenceConfig);
-
- SequenceConfigNew = SequenceConfig;
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (SequenceStepEnabled == 1) {
-
- /* Enable requested sequence step
- */
- switch (SequenceStepId) {
- case VL53L0X_SEQUENCESTEP_TCC:
- SequenceConfigNew |= 0x10;
- break;
- case VL53L0X_SEQUENCESTEP_DSS:
- SequenceConfigNew |= 0x28;
- break;
- case VL53L0X_SEQUENCESTEP_MSRC:
- SequenceConfigNew |= 0x04;
- break;
- case VL53L0X_SEQUENCESTEP_PRE_RANGE:
- SequenceConfigNew |= 0x40;
- break;
- case VL53L0X_SEQUENCESTEP_FINAL_RANGE:
- SequenceConfigNew |= 0x80;
- break;
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- } else {
- /* Disable requested sequence step
- */
- switch (SequenceStepId) {
- case VL53L0X_SEQUENCESTEP_TCC:
- SequenceConfigNew &= 0xef;
- break;
- case VL53L0X_SEQUENCESTEP_DSS:
- SequenceConfigNew &= 0xd7;
- break;
- case VL53L0X_SEQUENCESTEP_MSRC:
- SequenceConfigNew &= 0xfb;
- break;
- case VL53L0X_SEQUENCESTEP_PRE_RANGE:
- SequenceConfigNew &= 0xbf;
- break;
- case VL53L0X_SEQUENCESTEP_FINAL_RANGE:
- SequenceConfigNew &= 0x7f;
- break;
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
- }
-
- if (SequenceConfigNew != SequenceConfig) {
- /* Apply New Setting */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_WrByte(Dev,
- VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, SequenceConfigNew);
- }
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, SequenceConfig, SequenceConfigNew);
-
-
- /* Recalculate timing budget */
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_GETPARAMETERFIELD(Dev,
- MeasurementTimingBudgetMicroSeconds,
- MeasurementTimingBudgetMicroSeconds);
-
- VL53L0X_SetMeasurementTimingBudgetMicroSeconds(Dev,
- MeasurementTimingBudgetMicroSeconds);
- }
- }
-
- LOG_FUNCTION_END(Status);
-
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t sequence_config = 0;
+ uint8_t sequence_config_new = 0;
+ uint32_t measurement_timing_budget_micro_seconds;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_read_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG,
+ &sequence_config);
+
+ sequence_config_new = sequence_config;
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (sequence_step_enabled == 1) {
+
+ /* Enable requested sequence step
+ */
+ switch (sequence_step_id) {
+ case VL53L0X_SEQUENCESTEP_TCC:
+ sequence_config_new |= 0x10;
+ break;
+ case VL53L0X_SEQUENCESTEP_DSS:
+ sequence_config_new |= 0x28;
+ break;
+ case VL53L0X_SEQUENCESTEP_MSRC:
+ sequence_config_new |= 0x04;
+ break;
+ case VL53L0X_SEQUENCESTEP_PRE_RANGE:
+ sequence_config_new |= 0x40;
+ break;
+ case VL53L0X_SEQUENCESTEP_FINAL_RANGE:
+ sequence_config_new |= 0x80;
+ break;
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ } else {
+ /* Disable requested sequence step
+ */
+ switch (sequence_step_id) {
+ case VL53L0X_SEQUENCESTEP_TCC:
+ sequence_config_new &= 0xef;
+ break;
+ case VL53L0X_SEQUENCESTEP_DSS:
+ sequence_config_new &= 0xd7;
+ break;
+ case VL53L0X_SEQUENCESTEP_MSRC:
+ sequence_config_new &= 0xfb;
+ break;
+ case VL53L0X_SEQUENCESTEP_PRE_RANGE:
+ sequence_config_new &= 0xbf;
+ break;
+ case VL53L0X_SEQUENCESTEP_FINAL_RANGE:
+ sequence_config_new &= 0x7f;
+ break;
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+ }
+
+ if (sequence_config_new != sequence_config) {
+ /* Apply New Setting */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_write_byte(dev,
+ VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, sequence_config_new);
+ }
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, SequenceConfig, sequence_config_new);
+
+
+ /* Recalculate timing budget */
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_GETPARAMETERFIELD(dev,
+ MeasurementTimingBudgetMicroSeconds,
+ measurement_timing_budget_micro_seconds);
+
+ vl53l0x_set_measurement_timing_budget_micro_seconds(dev,
+ measurement_timing_budget_micro_seconds);
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_SetLimitCheckEnable(VL53L0X_DEV Dev, uint16_t LimitCheckId,
- uint8_t LimitCheckEnable)
+VL53L0X_Error VL53L0X::vl53l0x_set_limit_check_enable(VL53L0X_DEV dev, uint16_t limit_check_id,
+ uint8_t limit_check_enable)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- FixPoint1616_t TempFix1616 = 0;
- uint8_t LimitCheckEnableInt = 0;
- uint8_t LimitCheckDisable = 0;
- uint8_t Temp8;
-
- LOG_FUNCTION_START("");
-
- if (LimitCheckId >= VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS) {
- Status = VL53L0X_ERROR_INVALID_PARAMS;
- } else {
- if (LimitCheckEnable == 0) {
- TempFix1616 = 0;
- LimitCheckEnableInt = 0;
- LimitCheckDisable = 1;
-
- } else {
- VL53L0X_GETARRAYPARAMETERFIELD(Dev, LimitChecksValue,
- LimitCheckId, TempFix1616);
- LimitCheckDisable = 0;
- /* this to be sure to have either 0 or 1 */
- LimitCheckEnableInt = 1;
- }
-
- switch (LimitCheckId) {
-
- case VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE:
- /* internal computation: */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksEnable,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
- LimitCheckEnableInt);
-
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE:
-
- Status = VL53L0X_WrWord(Dev,
- VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
- VL53L0X_FIXPOINT1616TOFIXPOINT97(TempFix1616));
-
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP:
-
- /* internal computation: */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksEnable,
- VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
- LimitCheckEnableInt);
-
- break;
-
- case VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD:
-
- /* internal computation: */
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksEnable,
- VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
- LimitCheckEnableInt);
-
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC:
-
- Temp8 = (uint8_t)(LimitCheckDisable << 1);
- Status = VL53L0X_UpdateByte(Dev,
- VL53L0X_REG_MSRC_CONFIG_CONTROL,
- 0xFE, Temp8);
-
- break;
-
- case VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE:
-
- Temp8 = (uint8_t)(LimitCheckDisable << 4);
- Status = VL53L0X_UpdateByte(Dev,
- VL53L0X_REG_MSRC_CONFIG_CONTROL,
- 0xEF, Temp8);
-
- break;
-
-
- default:
- Status = VL53L0X_ERROR_INVALID_PARAMS;
-
- }
-
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- if (LimitCheckEnable == 0) {
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksEnable,
- LimitCheckId, 0);
- } else {
- VL53L0X_SETARRAYPARAMETERFIELD(Dev, LimitChecksEnable,
- LimitCheckId, 1);
- }
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ FixPoint1616_t temp_fix1616 = 0;
+ uint8_t limit_check_enable_int = 0;
+ uint8_t limit_check_disable = 0;
+ uint8_t temp8;
+
+ LOG_FUNCTION_START("");
+
+ if (limit_check_id >= VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS) {
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+ } else {
+ if (limit_check_enable == 0) {
+ temp_fix1616 = 0;
+ limit_check_enable_int = 0;
+ limit_check_disable = 1;
+
+ } else {
+ VL53L0X_GETARRAYPARAMETERFIELD(dev, LimitChecksValue,
+ limit_check_id, temp_fix1616);
+ limit_check_disable = 0;
+ /* this to be sure to have either 0 or 1 */
+ limit_check_enable_int = 1;
+ }
+
+ switch (limit_check_id) {
+
+ case VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE:
+ /* internal computation: */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksEnable,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE,
+ limit_check_enable_int);
+
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE:
+
+ status = vl53l0x_write_word(dev,
+ VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
+ VL53L0X_FIXPOINT1616TOFIXPOINT97(temp_fix1616));
+
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP:
+
+ /* internal computation: */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksEnable,
+ VL53L0X_CHECKENABLE_SIGNAL_REF_CLIP,
+ limit_check_enable_int);
+
+ break;
+
+ case VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD:
+
+ /* internal computation: */
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksEnable,
+ VL53L0X_CHECKENABLE_RANGE_IGNORE_THRESHOLD,
+ limit_check_enable_int);
+
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_MSRC:
+
+ temp8 = (uint8_t)(limit_check_disable << 1);
+ status = vl53l0x_update_byte(dev,
+ VL53L0X_REG_MSRC_CONFIG_CONTROL,
+ 0xFE, temp8);
+
+ break;
+
+ case VL53L0X_CHECKENABLE_SIGNAL_RATE_PRE_RANGE:
+
+ temp8 = (uint8_t)(limit_check_disable << 4);
+ status = vl53l0x_update_byte(dev,
+ VL53L0X_REG_MSRC_CONFIG_CONTROL,
+ 0xEF, temp8);
+
+ break;
+
+
+ default:
+ status = VL53L0X_ERROR_INVALID_PARAMS;
+
+ }
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ if (limit_check_enable == 0) {
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksEnable,
+ limit_check_id, 0);
+ } else {
+ VL53L0X_SETARRAYPARAMETERFIELD(dev, LimitChecksEnable,
+ limit_check_id, 1);
+ }
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_StaticInit(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_static_init(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- VL53L0X_DeviceParameters_t CurrentParameters = {0};
- uint8_t *pTuningSettingBuffer;
- uint16_t tempword = 0;
- uint8_t tempbyte = 0;
- uint8_t UseInternalTuningSettings = 0;
- uint32_t count = 0;
- uint8_t isApertureSpads = 0;
- uint32_t refSpadCount = 0;
- uint8_t ApertureSpads = 0;
- uint8_t vcselPulsePeriodPCLK;
- uint32_t seqTimeoutMicroSecs;
-
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_get_info_from_device(Dev, 1);
-
- /* set the ref spad from NVM */
- count = (uint32_t)VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadCount);
- ApertureSpads = VL53L0X_GETDEVICESPECIFICPARAMETER(Dev,
- ReferenceSpadType);
-
- /* NVM value invalid */
- if ((ApertureSpads > 1) ||
- ((ApertureSpads == 1) && (count > 32)) ||
- ((ApertureSpads == 0) && (count > 12)))
- Status = VL53L0X_perform_ref_spad_management(Dev, &refSpadCount,
- &isApertureSpads);
- else
- Status = VL53L0X_set_reference_spads(Dev, count, ApertureSpads);
-
-
- /* Initialize tuning settings buffer to prevent compiler warning. */
- pTuningSettingBuffer = DefaultTuningSettings;
-
- if (Status == VL53L0X_ERROR_NONE) {
- UseInternalTuningSettings = PALDevDataGet(Dev,
- UseInternalTuningSettings);
-
- if (UseInternalTuningSettings == 0)
- pTuningSettingBuffer = PALDevDataGet(Dev,
- pTuningSettingsPointer);
- else
- pTuningSettingBuffer = DefaultTuningSettings;
-
- }
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_load_tuning_settings(Dev, pTuningSettingBuffer);
-
-
- /* Set interrupt config to new sample ready */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetGpioConfig(Dev, 0, 0,
- VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY,
- VL53L0X_INTERRUPTPOLARITY_LOW);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status |= VL53L0X_RdWord(Dev, 0x84, &tempword);
- Status |= VL53L0X_WrByte(Dev, 0xFF, 0x00);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, OscFrequencyMHz,
- VL53L0X_FIXPOINT412TOFIXPOINT1616(tempword));
- }
-
- /* After static init, some device parameters may be changed,
- * so update them */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_GetDeviceParameters(Dev, &CurrentParameters);
-
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetFractionEnable(Dev, &tempbyte);
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, RangeFractionalEnable, tempbyte);
-
- }
-
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, CurrentParameters, CurrentParameters);
-
-
- /* read the sequence config and save it */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_RdByte(Dev,
- VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, &tempbyte);
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, SequenceConfig, tempbyte);
-
- }
-
- /* Disable MSRC and TCC by default */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_SetSequenceStepEnable(Dev,
- VL53L0X_SEQUENCESTEP_TCC, 0);
-
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_SetSequenceStepEnable(Dev,
- VL53L0X_SEQUENCESTEP_MSRC, 0);
-
-
- /* Set PAL State to standby */
- if (Status == VL53L0X_ERROR_NONE)
- PALDevDataSet(Dev, PalState, VL53L0X_STATE_IDLE);
-
-
-
- /* Store pre-range vcsel period */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetVcselPulsePeriod(
- Dev,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE,
- &vcselPulsePeriodPCLK);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- PreRangeVcselPulsePeriod,
- vcselPulsePeriodPCLK);
- }
-
- /* Store final-range vcsel period */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_GetVcselPulsePeriod(
- Dev,
- VL53L0X_VCSEL_PERIOD_FINAL_RANGE,
- &vcselPulsePeriodPCLK);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- FinalRangeVcselPulsePeriod,
- vcselPulsePeriodPCLK);
- }
-
- /* Store pre-range timeout */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = get_sequence_step_timeout(
- Dev,
- VL53L0X_SEQUENCESTEP_PRE_RANGE,
- &seqTimeoutMicroSecs);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- PreRangeTimeoutMicroSecs,
- seqTimeoutMicroSecs);
- }
-
- /* Store final-range timeout */
- if (Status == VL53L0X_ERROR_NONE) {
- Status = get_sequence_step_timeout(
- Dev,
- VL53L0X_SEQUENCESTEP_FINAL_RANGE,
- &seqTimeoutMicroSecs);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- VL53L0X_SETDEVICESPECIFICPARAMETER(
- Dev,
- FinalRangeTimeoutMicroSecs,
- seqTimeoutMicroSecs);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ VL53L0X_DeviceParameters_t current_parameters = {0};
+ uint8_t *p_tuning_setting_buffer;
+ uint16_t tempword = 0;
+ uint8_t tempbyte = 0;
+ uint8_t use_internal_tuning_settings = 0;
+ uint32_t count = 0;
+ uint8_t is_aperture_spads = 0;
+ uint32_t ref_spad_count = 0;
+ uint8_t aperture_spads = 0;
+ uint8_t vcsel_pulse_period_pclk;
+ uint32_t seq_timeout_micro_secs;
+
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_get_info_from_device(dev, 1);
+
+ /* set the ref spad from NVM */
+ count = (uint32_t)VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadCount);
+ aperture_spads = VL53L0X_GETDEVICESPECIFICPARAMETER(dev,
+ ReferenceSpadType);
+
+ /* NVM value invalid */
+ if ((aperture_spads > 1) ||
+ ((aperture_spads == 1) && (count > 32)) ||
+ ((aperture_spads == 0) && (count > 12)))
+ status = wrapped_vl53l0x_perform_ref_spad_management(dev, &ref_spad_count,
+ &is_aperture_spads);
+ else
+ status = vl53l0x_set_reference_spads(dev, count, aperture_spads);
+
+
+ /* Initialize tuning settings buffer to prevent compiler warning. */
+ p_tuning_setting_buffer = DefaultTuningSettings;
+
+ if (status == VL53L0X_ERROR_NONE) {
+ use_internal_tuning_settings = PALDevDataGet(dev,
+ UseInternalTuningSettings);
+
+ if (use_internal_tuning_settings == 0)
+ p_tuning_setting_buffer = PALDevDataGet(dev,
+ pTuningSettingsPointer);
+ else
+ p_tuning_setting_buffer = DefaultTuningSettings;
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_load_tuning_settings(dev, p_tuning_setting_buffer);
+
+
+ /* Set interrupt config to new sample ready */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_set_gpio_config(dev, 0, 0,
+ VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY,
+ VL53L0X_INTERRUPTPOLARITY_LOW);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status |= vl53l0x_read_word(dev, 0x84, &tempword);
+ status |= vl53l0x_write_byte(dev, 0xFF, 0x00);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(dev, OscFrequencyMHz,
+ VL53L0X_FIXPOINT412TOFIXPOINT1616(tempword));
+ }
+
+ /* After static init, some device parameters may be changed,
+ * so update them */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_get_device_parameters(dev, ¤t_parameters);
+
+
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_fraction_enable(dev, &tempbyte);
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, RangeFractionalEnable, tempbyte);
+
+ }
+
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, CurrentParameters, current_parameters);
+
+
+ /* read the sequence config and save it */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_read_byte(dev,
+ VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, &tempbyte);
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, SequenceConfig, tempbyte);
+
+ }
+
+ /* Disable MSRC and TCC by default */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_set_sequence_step_enable(dev,
+ VL53L0X_SEQUENCESTEP_TCC, 0);
+
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_set_sequence_step_enable(dev,
+ VL53L0X_SEQUENCESTEP_MSRC, 0);
+
+
+ /* Set PAL State to standby */
+ if (status == VL53L0X_ERROR_NONE)
+ PALDevDataSet(dev, PalState, VL53L0X_STATE_IDLE);
+
+
+
+ /* Store pre-range vcsel period */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_vcsel_pulse_period(
+ dev,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE,
+ &vcsel_pulse_period_pclk);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ PreRangeVcselPulsePeriod,
+ vcsel_pulse_period_pclk);
+ }
+
+ /* Store final-range vcsel period */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_vcsel_pulse_period(
+ dev,
+ VL53L0X_VCSEL_PERIOD_FINAL_RANGE,
+ &vcsel_pulse_period_pclk);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ FinalRangeVcselPulsePeriod,
+ vcsel_pulse_period_pclk);
+ }
+
+ /* Store pre-range timeout */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = get_sequence_step_timeout(
+ dev,
+ VL53L0X_SEQUENCESTEP_PRE_RANGE,
+ &seq_timeout_micro_secs);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ PreRangeTimeoutMicroSecs,
+ seq_timeout_micro_secs);
+ }
+
+ /* Store final-range timeout */
+ if (status == VL53L0X_ERROR_NONE) {
+ status = get_sequence_step_timeout(
+ dev,
+ VL53L0X_SEQUENCESTEP_FINAL_RANGE,
+ &seq_timeout_micro_secs);
+ }
+
+ if (status == VL53L0X_ERROR_NONE) {
+ VL53L0X_SETDEVICESPECIFICPARAMETER(
+ dev,
+ FinalRangeTimeoutMicroSecs,
+ seq_timeout_micro_secs);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_StopMeasurement(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::vl53l0x_stop_measurement(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_WrByte(Dev, VL53L0X_REG_SYSRANGE_START,
- VL53L0X_REG_SYSRANGE_MODE_SINGLESHOT);
-
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status = VL53L0X_WrByte(Dev, 0x00, 0x00);
- Status = VL53L0X_WrByte(Dev, 0x91, 0x00);
- Status = VL53L0X_WrByte(Dev, 0x00, 0x01);
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
-
- if (Status == VL53L0X_ERROR_NONE) {
- /* Set PAL State to Idle */
- PALDevDataSet(Dev, PalState, VL53L0X_STATE_IDLE);
- }
-
- /* Check if need to apply interrupt settings */
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_CheckAndLoadInterruptSettings(Dev, 0);
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_write_byte(dev, VL53L0X_REG_SYSRANGE_START,
+ VL53L0X_REG_SYSRANGE_MODE_SINGLESHOT);
+
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status = vl53l0x_write_byte(dev, 0x00, 0x00);
+ status = vl53l0x_write_byte(dev, 0x91, 0x00);
+ status = vl53l0x_write_byte(dev, 0x00, 0x01);
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+
+ if (status == VL53L0X_ERROR_NONE) {
+ /* Set PAL State to Idle */
+ PALDevDataSet(dev, PalState, VL53L0X_STATE_IDLE);
+ }
+
+ /* Check if need to apply interrupt settings */
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_check_and_load_interrupt_settings(dev, 0);
+
+ LOG_FUNCTION_END(status);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_GetStopCompletedStatus(VL53L0X_DEV Dev,
- uint32_t *pStopStatus)
+VL53L0X_Error VL53L0X::vl53l0x_get_stop_completed_status(VL53L0X_DEV dev,
+ uint32_t *p_stop_status)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t Byte = 0;
- LOG_FUNCTION_START("");
-
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_RdByte(Dev, 0x04, &Byte);
-
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x0);
-
- *pStopStatus = Byte;
-
- if (Byte == 0) {
- Status = VL53L0X_WrByte(Dev, 0x80, 0x01);
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x01);
- Status = VL53L0X_WrByte(Dev, 0x00, 0x00);
- Status = VL53L0X_WrByte(Dev, 0x91,
- PALDevDataGet(Dev, StopVariable));
- Status = VL53L0X_WrByte(Dev, 0x00, 0x01);
- Status = VL53L0X_WrByte(Dev, 0xFF, 0x00);
- Status = VL53L0X_WrByte(Dev, 0x80, 0x00);
- }
-
- LOG_FUNCTION_END(Status);
- return Status;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t byte = 0;
+ LOG_FUNCTION_START("");
+
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_read_byte(dev, 0x04, &byte);
+
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_write_byte(dev, 0xFF, 0x0);
+
+ *p_stop_status = byte;
+
+ if (byte == 0) {
+ status = vl53l0x_write_byte(dev, 0x80, 0x01);
+ status = vl53l0x_write_byte(dev, 0xFF, 0x01);
+ status = vl53l0x_write_byte(dev, 0x00, 0x00);
+ status = vl53l0x_write_byte(dev, 0x91,
+ PALDevDataGet(dev, StopVariable));
+ status = vl53l0x_write_byte(dev, 0x00, 0x01);
+ status = vl53l0x_write_byte(dev, 0xFF, 0x00);
+ status = vl53l0x_write_byte(dev, 0x80, 0x00);
+ }
+
+ LOG_FUNCTION_END(status);
+ return status;
}
/****************** Write and read functions from I2C *************************/
-VL53L0X_Error VL53L0X::VL53L0X_WriteMulti(VL53L0X_DEV Dev, uint8_t index, uint8_t *pdata, uint32_t count)
+VL53L0X_Error VL53L0X::vl53l0x_write_multi(VL53L0X_DEV dev, uint8_t index, uint8_t *p_data, uint32_t count)
{
- int status;
-
- status = VL53L0X_I2CWrite(Dev->I2cDevAddr, index, pdata, (uint16_t)count);
- return status;
+ int status;
+
+ status = vl53l0x_i2c_write(dev->I2cDevAddr, index, p_data, (uint16_t)count);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_ReadMulti(VL53L0X_DEV Dev, uint8_t index, uint8_t *pdata, uint32_t count)
+VL53L0X_Error VL53L0X::vl53l0x_read_multi(VL53L0X_DEV dev, uint8_t index, uint8_t *p_data, uint32_t count)
{
int status;
- if (count>=VL53L0X_MAX_I2C_XFER_SIZE){
+ if (count >= VL53L0X_MAX_I2C_XFER_SIZE) {
status = VL53L0X_ERROR_INVALID_PARAMS;
}
- status = VL53L0X_I2CRead(Dev->I2cDevAddr, index, pdata, (uint16_t)count);
+ status = vl53l0x_i2c_read(dev->I2cDevAddr, index, p_data, (uint16_t)count);
return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_WrByte(VL53L0X_DEV Dev, uint8_t index, uint8_t data)
+VL53L0X_Error VL53L0X::vl53l0x_write_byte(VL53L0X_DEV Dev, uint8_t index, uint8_t data)
{
- int status;
-
- status=VL53L0X_I2CWrite(Dev->I2cDevAddr, index, &data, 1);
- return status;
+ int status;
+
+ status = vl53l0x_i2c_write(Dev->I2cDevAddr, index, &data, 1);
+ return status;
}
-
-VL53L0X_Error VL53L0X::VL53L0X_WrWord(VL53L0X_DEV Dev, uint8_t index, uint16_t data)
+
+VL53L0X_Error VL53L0X::vl53l0x_write_word(VL53L0X_DEV dev, uint8_t index, uint16_t data)
{
- int status;
- uint8_t buffer[2];
-
- buffer[0] = data >> 8;
- buffer[1] = data & 0x00FF;
- status=VL53L0X_I2CWrite(Dev->I2cDevAddr, index, (uint8_t *)buffer, 2);
- return status;
+ int status;
+ uint8_t buffer[2];
+
+ buffer[0] = data >> 8;
+ buffer[1] = data & 0x00FF;
+ status = vl53l0x_i2c_write(dev->I2cDevAddr, index, (uint8_t *)buffer, 2);
+ return status;
}
-
-VL53L0X_Error VL53L0X::VL53L0X_WrDWord(VL53L0X_DEV Dev, uint8_t index, uint32_t data)
+
+VL53L0X_Error VL53L0X::vl53l0x_write_dword(VL53L0X_DEV Dev, uint8_t index, uint32_t data)
{
- int status;
- uint8_t buffer[4];
-
- buffer[0] = (data >> 24) & 0xFF;
- buffer[1] = (data >> 16) & 0xFF;
- buffer[2] = (data >> 8) & 0xFF;
- buffer[3] = (data >> 0) & 0xFF;
- status=VL53L0X_I2CWrite(Dev->I2cDevAddr, index, (uint8_t *)buffer, 4);
- return status;
+ int status;
+ uint8_t buffer[4];
+
+ buffer[0] = (data >> 24) & 0xFF;
+ buffer[1] = (data >> 16) & 0xFF;
+ buffer[2] = (data >> 8) & 0xFF;
+ buffer[3] = (data >> 0) & 0xFF;
+ status = vl53l0x_i2c_write(Dev->I2cDevAddr, index, (uint8_t *)buffer, 4);
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_RdByte(VL53L0X_DEV Dev, uint8_t index, uint8_t *data)
+VL53L0X_Error VL53L0X::vl53l0x_read_byte(VL53L0X_DEV Dev, uint8_t index, uint8_t *p_data)
{
- int status;
-
- status = VL53L0X_I2CRead(Dev->I2cDevAddr, index, data, 1);
-
- if(status)
- return -1;
-
- return 0;
+ int status;
+
+ status = vl53l0x_i2c_read(Dev->I2cDevAddr, index, p_data, 1);
+
+ if (status)
+ return -1;
+
+ return 0;
}
-
-VL53L0X_Error VL53L0X::VL53L0X_RdWord(VL53L0X_DEV Dev, uint8_t index, uint16_t *data)
+
+VL53L0X_Error VL53L0X::vl53l0x_read_word(VL53L0X_DEV Dev, uint8_t index, uint16_t *p_data)
{
- int status;
- uint8_t buffer[2] = {0,0};
-
- status = VL53L0X_I2CRead(Dev->I2cDevAddr, index, buffer, 2);
- if (!status)
- {
- *data = (buffer[0] << 8) + buffer[1];
- }
- return status;
+ int status;
+ uint8_t buffer[2] = {0, 0};
+
+ status = vl53l0x_i2c_read(Dev->I2cDevAddr, index, buffer, 2);
+ if (!status) {
+ *p_data = (buffer[0] << 8) + buffer[1];
+ }
+ return status;
}
-
-VL53L0X_Error VL53L0X::VL53L0X_RdDWord(VL53L0X_DEV Dev, uint8_t index, uint32_t *data)
+
+VL53L0X_Error VL53L0X::vl53l0x_read_dword(VL53L0X_DEV Dev, uint8_t index, uint32_t *p_data)
{
- int status;
- uint8_t buffer[4] = {0,0,0,0};
-
- status = VL53L0X_I2CRead(Dev->I2cDevAddr, index, buffer, 4);
- if(!status)
- {
- *data = (buffer[0] << 24) + (buffer[1] << 16) + (buffer[2] << 8) + buffer[3];
- }
- return status;
+ int status;
+ uint8_t buffer[4] = {0, 0, 0, 0};
+
+ status = vl53l0x_i2c_read(Dev->I2cDevAddr, index, buffer, 4);
+ if (!status) {
+ *p_data = (buffer[0] << 24) + (buffer[1] << 16) + (buffer[2] << 8) + buffer[3];
+ }
+ return status;
}
-VL53L0X_Error VL53L0X::VL53L0X_UpdateByte(VL53L0X_DEV Dev, uint8_t index, uint8_t AndData, uint8_t OrData)
+VL53L0X_Error VL53L0X::vl53l0x_update_byte(VL53L0X_DEV Dev, uint8_t index, uint8_t and_data, uint8_t or_data)
{
- int status;
- uint8_t buffer = 0;
-
- /* read data direct onto buffer */
- status = VL53L0X_I2CRead(Dev->I2cDevAddr, index, &buffer,1);
- if (!status)
- {
- buffer = (buffer & AndData) | OrData;
- status = VL53L0X_I2CWrite(Dev->I2cDevAddr, index, &buffer, (uint8_t)1);
- }
- return status;
+ int status;
+ uint8_t buffer = 0;
+
+ /* read data direct onto buffer */
+ status = vl53l0x_i2c_read(Dev->I2cDevAddr, index, &buffer, 1);
+ if (!status) {
+ buffer = (buffer & and_data) | or_data;
+ status = vl53l0x_i2c_write(Dev->I2cDevAddr, index, &buffer, (uint8_t)1);
+ }
+ return status;
}
-
-VL53L0X_Error VL53L0X::VL53L0X_I2CWrite(uint8_t DeviceAddr, uint8_t RegisterAddr, uint8_t* pBuffer, uint16_t NumByteToWrite)
+
+VL53L0X_Error VL53L0X::vl53l0x_i2c_write(uint8_t DeviceAddr, uint8_t RegisterAddr, uint8_t *p_data,
+ uint16_t NumByteToWrite)
{
- int ret;
-
- ret = dev_i2c.i2c_write(pBuffer, DeviceAddr, RegisterAddr, NumByteToWrite);
-
- if(ret)
- return -1;
- return 0;
+ int ret;
+
+ ret = dev_i2c.i2c_write(p_data, DeviceAddr, RegisterAddr, NumByteToWrite);
+
+ if (ret)
+ return -1;
+ return 0;
}
-
-VL53L0X_Error VL53L0X::VL53L0X_I2CRead(uint8_t DeviceAddr, uint8_t RegisterAddr, uint8_t* pBuffer, uint16_t NumByteToRead)
+
+VL53L0X_Error VL53L0X::vl53l0x_i2c_read(uint8_t DeviceAddr, uint8_t RegisterAddr, uint8_t *p_data,
+ uint16_t NumByteToRead)
{
- int ret;
-
- ret = dev_i2c.i2c_read(pBuffer, DeviceAddr, RegisterAddr, NumByteToRead);
-
- if(ret)
- return -1;
- return 0;
-}
+ int ret;
+
+ ret = dev_i2c.i2c_read(p_data, DeviceAddr, RegisterAddr, NumByteToRead);
+
+ if (ret)
+ return -1;
+ return 0;
+}
int VL53L0X::read_id(uint8_t *id)
{
int status = 0;
- uint16_t rl_id=0;
-
- status = VL53L0X_RdWord(Device, VL53L0X_REG_IDENTIFICATION_MODEL_ID, &rl_id);
+ uint16_t rl_id = 0;
+
+ status = vl53l0x_read_word(_device, VL53L0X_REG_IDENTIFICATION_MODEL_ID, &rl_id);
if (rl_id == 0xEEAA)
return status;
-
+
return -1;
}
-int VL53L0X::ReadID(uint8_t *id)
+
+VL53L0X_Error VL53L0X::wait_measurement_data_ready(VL53L0X_DEV dev)
{
- return read_id(id);
-}
-
-
-VL53L0X_Error VL53L0X::WaitMeasurementDataReady(VL53L0X_DEV Dev)
-{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint8_t NewDatReady=0;
- uint32_t LoopNb;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint8_t new_dat_ready = 0;
+ uint32_t loop_nb;
// Wait until it finished
// use timeout to avoid deadlock
- if (Status == VL53L0X_ERROR_NONE) {
- LoopNb = 0;
+ if (status == VL53L0X_ERROR_NONE) {
+ loop_nb = 0;
do {
- Status = VL53L0X_GetMeasurementDataReady(Dev, &NewDatReady);
- if ((NewDatReady == 0x01) || Status != VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_measurement_data_ready(dev, &new_dat_ready);
+ if ((new_dat_ready == 0x01) || status != VL53L0X_ERROR_NONE) {
break;
}
- LoopNb = LoopNb + 1;
- VL53L0X_PollingDelay(Dev);
- } while (LoopNb < VL53L0X_DEFAULT_MAX_LOOP);
-
- if (LoopNb >= VL53L0X_DEFAULT_MAX_LOOP) {
- Status = VL53L0X_ERROR_TIME_OUT;
+ loop_nb = loop_nb + 1;
+ vl53l0x_polling_delay(dev);
+ } while (loop_nb < VL53L0X_DEFAULT_MAX_LOOP);
+
+ if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP) {
+ status = VL53L0X_ERROR_TIME_OUT;
}
}
- return Status;
+ return status;
}
-VL53L0X_Error VL53L0X::WaitStopCompleted(VL53L0X_DEV Dev)
+VL53L0X_Error VL53L0X::wait_stop_completed(VL53L0X_DEV dev)
{
- VL53L0X_Error Status = VL53L0X_ERROR_NONE;
- uint32_t StopCompleted=0;
- uint32_t LoopNb;
+ VL53L0X_Error status = VL53L0X_ERROR_NONE;
+ uint32_t stop_completed = 0;
+ uint32_t loop_nb;
// Wait until it finished
// use timeout to avoid deadlock
- if (Status == VL53L0X_ERROR_NONE) {
- LoopNb = 0;
+ if (status == VL53L0X_ERROR_NONE) {
+ loop_nb = 0;
do {
- Status = VL53L0X_GetStopCompletedStatus(Dev, &StopCompleted);
- if ((StopCompleted == 0x00) || Status != VL53L0X_ERROR_NONE) {
+ status = vl53l0x_get_stop_completed_status(dev, &stop_completed);
+ if ((stop_completed == 0x00) || status != VL53L0X_ERROR_NONE) {
break;
}
- LoopNb = LoopNb + 1;
- VL53L0X_PollingDelay(Dev);
- } while (LoopNb < VL53L0X_DEFAULT_MAX_LOOP);
-
- if (LoopNb >= VL53L0X_DEFAULT_MAX_LOOP) {
- Status = VL53L0X_ERROR_TIME_OUT;
+ loop_nb = loop_nb + 1;
+ vl53l0x_polling_delay(dev);
+ } while (loop_nb < VL53L0X_DEFAULT_MAX_LOOP);
+
+ if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP) {
+ status = VL53L0X_ERROR_TIME_OUT;
}
}
- return Status;
+ return status;
}
-int VL53L0X::InitSensor(uint8_t NewAddr)
+int VL53L0X::init_sensor(uint8_t new_addr)
{
- int status;
-
- VL53L0X_Off();
- VL53L0X_On();
+ int status;
+
+ vl53l0x_off();
+ vl53l0x_on();
// status=VL53L0X_WaitDeviceBooted(Device);
// if(status)
// printf("WaitDeviceBooted fail\n\r");
- status=IsPresent();
- if(!status)
- {
- status=Init(&MyDevice);
- if(status != VL53L0X_ERROR_NONE)
- {
- printf("Failed to init VL53L0X sensor!\n\r");
- return status;
- }
-
- // deduce silicon version
- status = VL53L0X_GetDeviceInfo(&MyDevice, &DeviceInfo);
-
-
- status=Prepare();
- if(status != VL53L0X_ERROR_NONE)
- {
- printf("Failed to prepare VL53L0X!\n\r");
- return status;
- }
-
- if(NewAddr!=DEFAULT_DEVICE_ADDRESS)
- {
- status=SetDeviceAddress(NewAddr);
- if(status)
- {
- printf("Failed to change I2C address!\n\r");
+ status = is_present();
+ if (!status) {
+ status = init(&_my_device);
+ if (status != VL53L0X_ERROR_NONE) {
+ printf("Failed to init VL53L0X sensor!\n\r");
+ return status;
+ }
+
+ // deduce silicon version
+ status = vl53l0x_get_device_info(&_my_device, &_device_info);
+
+
+ status = prepare();
+ if (status != VL53L0X_ERROR_NONE) {
+ printf("Failed to prepare VL53L0X!\n\r");
return status;
- }
- }
- else
- {
- printf("Invalid new address!\n\r");
- return VL53L0X_ERROR_INVALID_PARAMS;
- }
- }
- return status;
+ }
+
+ if (new_addr != DEFAULT_DEVICE_ADDRESS) {
+ status = set_device_address(new_addr);
+ if (status) {
+ printf("Failed to change I2C address!\n\r");
+ return status;
+ }
+ } else {
+ printf("Invalid new address!\n\r");
+ return VL53L0X_ERROR_INVALID_PARAMS;
+ }
+ }
+ return status;
}
-int VL53L0X::RangeMeasIntContinuousMode(void (*fptr)(void))
+int VL53L0X::range_meas_int_continuous_mode(void (*fptr)(void))
{
- int status, ClrStatus;
-
- status = VL53L0X_StopMeasurement(Device); // it is safer to do this while sensor is stopped
+ int status, clr_status;
+
+ status = vl53l0x_stop_measurement(_device); // it is safer to do this while sensor is stopped
// status = VL53L0X_SetInterruptThresholds(Device, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING, 0, 300);
- status = VL53L0X_SetGpioConfig(Device, 0, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
- VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY,
- VL53L0X_INTERRUPTPOLARITY_HIGH);
-
- if (!status)
- {
- AttachInterruptMeasureDetectionIRQ(fptr);
- EnableInterruptMeasureDetectionIRQ();
- }
-
- ClrStatus=ClearInterrupt(VL53L0X_REG_RESULT_INTERRUPT_STATUS|VL53L0X_REG_RESULT_RANGE_STATUS);
- if(ClrStatus)
- VL53L0X_ErrLog("VL53L0X_ClearErrorInterrupt fail\r\n");
-
- if(!status)
- {
- status=RangeStartContinuousMode();
- }
- return status;
+ status = vl53l0x_set_gpio_config(_device, 0, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
+ VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY,
+ VL53L0X_INTERRUPTPOLARITY_HIGH);
+
+ if (!status) {
+ attach_interrupt_measure_detection_irq(fptr);
+ enable_interrupt_measure_detection_irq();
+ }
+
+ clr_status = clear_interrupt(VL53L0X_REG_RESULT_INTERRUPT_STATUS | VL53L0X_REG_RESULT_RANGE_STATUS);
+ if (clr_status)
+ VL53L0X_ErrLog("VL53L0X_ClearErrorInterrupt fail\r\n");
+
+ if (!status) {
+ status = range_start_continuous_mode();
+ }
+ return status;
}
-int VL53L0X::StartMeasurement(OperatingMode operating_mode, void (*fptr)(void))
+int VL53L0X::start_measurement(OperatingMode operating_mode, void (*fptr)(void))
{
int Status = VL53L0X_ERROR_NONE;
int ClrStatus;
@@ -5215,225 +5202,207 @@
uint8_t PhaseCal;
// *** from mass market cube expansion v1.1, ranging with satellites.
// default settings, for normal range.
- FixPoint1616_t signalLimit = (FixPoint1616_t)(0.25*65536);
- FixPoint1616_t sigmaLimit = (FixPoint1616_t)(18*65536);
- uint32_t timingBudget = 33000;
- uint8_t preRangeVcselPeriod = 14;
- uint8_t finalRangeVcselPeriod = 10;
-
- if (operating_mode == range_continuous_interrupt)
- {
- if (gpio1Int==NULL)
- {
- printf ("GPIO1 Error\r\n");
+ FixPoint1616_t signalLimit = (FixPoint1616_t)(0.25 * 65536);
+ FixPoint1616_t sigmaLimit = (FixPoint1616_t)(18 * 65536);
+ uint32_t timingBudget = 33000;
+ uint8_t preRangeVcselPeriod = 14;
+ uint8_t finalRangeVcselPeriod = 10;
+
+ if (operating_mode == range_continuous_interrupt) {
+ if (gpio1Int == NULL) {
+ printf("GPIO1 Error\r\n");
return 1;
}
- Status = VL53L0X_StopMeasurement(Device); // it is safer to do this while sensor is stopped
+ Status = vl53l0x_stop_measurement(_device); // it is safer to do this while sensor is stopped
// Status = VL53L0X_SetInterruptThresholds(Device, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING, 0, 300);
- Status = VL53L0X_SetGpioConfig(Device, 0, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
- VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY,
- VL53L0X_INTERRUPTPOLARITY_HIGH);
-
- if (Status == VL53L0X_ERROR_NONE)
- {
- AttachInterruptMeasureDetectionIRQ(fptr);
- EnableInterruptMeasureDetectionIRQ();
+ Status = vl53l0x_set_gpio_config(_device, 0, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING,
+ VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY,
+ VL53L0X_INTERRUPTPOLARITY_HIGH);
+
+ if (Status == VL53L0X_ERROR_NONE) {
+ attach_interrupt_measure_detection_irq(fptr);
+ enable_interrupt_measure_detection_irq();
}
- ClrStatus=ClearInterrupt(VL53L0X_REG_RESULT_INTERRUPT_STATUS|VL53L0X_REG_RESULT_RANGE_STATUS);
- if(ClrStatus)
- VL53L0X_ErrLog("VL53L0X_ClearErrorInterrupt fail\r\n");
-
- if(Status == VL53L0X_ERROR_NONE)
- {
- Status = VL53L0X_SetDeviceMode(Device, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING); // Setup in continuous ranging mode
+ ClrStatus = clear_interrupt(VL53L0X_REG_RESULT_INTERRUPT_STATUS | VL53L0X_REG_RESULT_RANGE_STATUS);
+ if (ClrStatus)
+ VL53L0X_ErrLog("VL53L0X_ClearErrorInterrupt fail\r\n");
+
+ if (Status == VL53L0X_ERROR_NONE) {
+ Status = vl53l0x_set_device_mode(_device, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING); // Setup in continuous ranging mode
}
- if(Status == VL53L0X_ERROR_NONE)
- {
- Status = VL53L0X_StartMeasurement(Device);
+ if (Status == VL53L0X_ERROR_NONE) {
+ Status = vl53l0x_start_measurement(_device);
}
}
- if (operating_mode == range_single_shot_polling)
- {
+ if (operating_mode == range_single_shot_polling) {
// singelshot, polled ranging
- if(Status == VL53L0X_ERROR_NONE)
- {
+ if (Status == VL53L0X_ERROR_NONE) {
// no need to do this when we use VL53L0X_PerformSingleRangingMeasurement
- Status = VL53L0X_SetDeviceMode(Device, VL53L0X_DEVICEMODE_SINGLE_RANGING); // Setup in single ranging mode
+ Status = vl53l0x_set_device_mode(_device, VL53L0X_DEVICEMODE_SINGLE_RANGING); // Setup in single ranging mode
}
// Enable/Disable Sigma and Signal check
if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckEnable(Device,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, 1);
+ Status = vl53l0x_set_limit_check_enable(_device,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, 1);
}
if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckEnable(Device,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE, 1);
+ Status = vl53l0x_set_limit_check_enable(_device,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE, 1);
}
// *** from mass market cube expansion v1.1, ranging with satellites.
- /* Ranging configuration */
+ /* Ranging configuration */
//*
// switch(rangingConfig) {
// case LONG_RANGE:
- signalLimit = (FixPoint1616_t)(0.1*65536);
- sigmaLimit = (FixPoint1616_t)(60*65536);
- timingBudget = 33000;
- preRangeVcselPeriod = 18;
- finalRangeVcselPeriod = 14;
-/* break;
- case HIGH_ACCURACY:
- signalLimit = (FixPoint1616_t)(0.25*65536);
- sigmaLimit = (FixPoint1616_t)(18*65536);
- timingBudget = 200000;
- preRangeVcselPeriod = 14;
- finalRangeVcselPeriod = 10;
- break;
- case HIGH_SPEED:
- signalLimit = (FixPoint1616_t)(0.25*65536);
- sigmaLimit = (FixPoint1616_t)(32*65536);
- timingBudget = 20000;
- preRangeVcselPeriod = 14;
- finalRangeVcselPeriod = 10;
- break;
- default:
- debug_printf("Not Supported");
- }
-*/
+ signalLimit = (FixPoint1616_t)(0.1 * 65536);
+ sigmaLimit = (FixPoint1616_t)(60 * 65536);
+ timingBudget = 33000;
+ preRangeVcselPeriod = 18;
+ finalRangeVcselPeriod = 14;
+ /* break;
+ case HIGH_ACCURACY:
+ signalLimit = (FixPoint1616_t)(0.25*65536);
+ sigmaLimit = (FixPoint1616_t)(18*65536);
+ timingBudget = 200000;
+ preRangeVcselPeriod = 14;
+ finalRangeVcselPeriod = 10;
+ break;
+ case HIGH_SPEED:
+ signalLimit = (FixPoint1616_t)(0.25*65536);
+ sigmaLimit = (FixPoint1616_t)(32*65536);
+ timingBudget = 20000;
+ preRangeVcselPeriod = 14;
+ finalRangeVcselPeriod = 10;
+ break;
+ default:
+ debug_printf("Not Supported");
+ }
+ */
if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckValue(Device,
- VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE, signalLimit);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetLimitCheckValue(Device,
- VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, sigmaLimit);
- }
-
- if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetMeasurementTimingBudgetMicroSeconds(Device, timingBudget);
+ Status = vl53l0x_set_limit_check_value(_device,
+ VL53L0X_CHECKENABLE_SIGNAL_RATE_FINAL_RANGE, signalLimit);
}
if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetVcselPulsePeriod(Device,
- VL53L0X_VCSEL_PERIOD_PRE_RANGE, preRangeVcselPeriod);
- }
+ Status = vl53l0x_set_limit_check_value(_device,
+ VL53L0X_CHECKENABLE_SIGMA_FINAL_RANGE, sigmaLimit);
+ }
+
+ if (Status == VL53L0X_ERROR_NONE) {
+ Status = vl53l0x_set_measurement_timing_budget_micro_seconds(_device, timingBudget);
+ }
if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_SetVcselPulsePeriod(Device,
- VL53L0X_VCSEL_PERIOD_FINAL_RANGE, finalRangeVcselPeriod);
- }
+ Status = vl53l0x_set_vcsel_pulse_period(_device,
+ VL53L0X_VCSEL_PERIOD_PRE_RANGE, preRangeVcselPeriod);
+ }
if (Status == VL53L0X_ERROR_NONE) {
- Status = VL53L0X_PerformRefCalibration(Device, &VhvSettings, &PhaseCal);
- }
+ Status = vl53l0x_set_vcsel_pulse_period(_device,
+ VL53L0X_VCSEL_PERIOD_FINAL_RANGE, finalRangeVcselPeriod);
+ }
+
+ if (Status == VL53L0X_ERROR_NONE) {
+ Status = vl53l0x_perform_ref_calibration(_device, &VhvSettings, &PhaseCal);
+ }
}
- if (operating_mode == range_continuous_polling)
- {
- if(Status == VL53L0X_ERROR_NONE)
- {
- printf ("Call of VL53L0X_SetDeviceMode\n");
- Status = VL53L0X_SetDeviceMode(Device, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING); // Setup in continuous ranging mode
+ if (operating_mode == range_continuous_polling) {
+ if (Status == VL53L0X_ERROR_NONE) {
+ printf("Call of VL53L0X_SetDeviceMode\n");
+ Status = vl53l0x_set_device_mode(_device, VL53L0X_DEVICEMODE_CONTINUOUS_RANGING); // Setup in continuous ranging mode
}
- if(Status == VL53L0X_ERROR_NONE)
- {
- printf ("Call of VL53L0X_StartMeasurement\n");
- Status = VL53L0X_StartMeasurement(Device);
+ if (Status == VL53L0X_ERROR_NONE) {
+ printf("Call of VL53L0X_StartMeasurement\n");
+ Status = vl53l0x_start_measurement(_device);
}
}
return Status;
}
-
-
-int VL53L0X::GetMeasurement(OperatingMode operating_mode, VL53L0X_RangingMeasurementData_t *Data)
+
+
+int VL53L0X::get_measurement(OperatingMode operating_mode, VL53L0X_RangingMeasurementData_t *p_data)
{
int Status = VL53L0X_ERROR_NONE;
- if (operating_mode == range_single_shot_polling)
- {
- Status = VL53L0X_PerformSingleRangingMeasurement(Device, Data);
+ if (operating_mode == range_single_shot_polling) {
+ Status = vl53l0x_perform_single_ranging_measurement(_device, p_data);
}
- if (operating_mode == range_continuous_polling)
- {
- if (Status == VL53L0X_ERROR_NONE)
- Status = VL53L0X_measurement_poll_for_completion(Device);
-
- if(Status == VL53L0X_ERROR_NONE)
- {
- Status = VL53L0X_GetRangingMeasurementData(Device, Data);
-
- // Clear the interrupt
- VL53L0X_ClearInterruptMask(Device, VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY);
- VL53L0X_PollingDelay(Device);
+ if (operating_mode == range_continuous_polling) {
+ if (Status == VL53L0X_ERROR_NONE)
+ Status = vl53l0x_measurement_poll_for_completion(_device);
+
+ if (Status == VL53L0X_ERROR_NONE) {
+ Status = vl53l0x_get_ranging_measurement_data(_device, p_data);
+
+ // Clear the interrupt
+ vl53l0x_clear_interrupt_mask(_device, VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY);
+ vl53l0x_polling_delay(_device);
}
}
- if (operating_mode == range_continuous_interrupt)
- {
- Status = VL53L0X_GetRangingMeasurementData(Device, Data);
- VL53L0X_ClearInterruptMask(Device, VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR | VL53L0X_REG_RESULT_INTERRUPT_STATUS);
- }
+ if (operating_mode == range_continuous_interrupt) {
+ Status = vl53l0x_get_ranging_measurement_data(_device, p_data);
+ vl53l0x_clear_interrupt_mask(_device, VL53L0X_REG_SYSTEM_INTERRUPT_CLEAR | VL53L0X_REG_RESULT_INTERRUPT_STATUS);
+ }
return Status;
}
-
-
-int VL53L0X::StopMeasurement(OperatingMode operating_mode)
+
+
+int VL53L0X::stop_measurement(OperatingMode operating_mode)
{
int status = VL53L0X_ERROR_NONE;
- // don't need to stop for a singleshot range!
- if (operating_mode==range_single_shot_polling)
- {
+ // don't need to stop for a singleshot range!
+ if (operating_mode == range_single_shot_polling) {
}
- if (operating_mode==range_continuous_interrupt || operating_mode==range_continuous_polling)
- {
- // continuous mode
- if(status == VL53L0X_ERROR_NONE)
- {
- printf ("Call of VL53L0X_StopMeasurement\n");
- status = VL53L0X_StopMeasurement(Device);
+ if (operating_mode == range_continuous_interrupt || operating_mode == range_continuous_polling) {
+ // continuous mode
+ if (status == VL53L0X_ERROR_NONE) {
+ printf("Call of VL53L0X_StopMeasurement\n");
+ status = vl53l0x_stop_measurement(_device);
}
- if(status == VL53L0X_ERROR_NONE)
- {
- printf ("Wait Stop to be competed\n");
- status = WaitStopCompleted(Device);
+ if (status == VL53L0X_ERROR_NONE) {
+ printf("Wait Stop to be competed\n");
+ status = wait_stop_completed(_device);
}
- if(status == VL53L0X_ERROR_NONE)
- status = VL53L0X_ClearInterruptMask(Device,
- VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY);
+ if (status == VL53L0X_ERROR_NONE)
+ status = vl53l0x_clear_interrupt_mask(_device,
+ VL53L0X_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY);
}
return status;
}
-int VL53L0X::HandleIRQ(OperatingMode operating_mode, VL53L0X_RangingMeasurementData_t *Data)
+int VL53L0X::handle_irq(OperatingMode operating_mode, VL53L0X_RangingMeasurementData_t *data)
{
- int status;
- status=GetMeasurement(operating_mode, Data);
- EnableInterruptMeasureDetectionIRQ();
- return status;
+ int status;
+ status = get_measurement(operating_mode, data);
+ enable_interrupt_measure_detection_irq();
+ return status;
}
-
-
-
+
+
+
/******************************************************************************/
X-NUCLEO-53L0A1 Ranging Sensor Expansion Board