Library for use with VL53L0X, cut 1.1, based on mass-market API v1.1.

Dependencies:   ST_INTERFACES X_NUCLEO_COMMON

Dependents:   ConcorsoFinal HelloWorld_IHM01A1 m3pi_BT m3pi_LIDAR ... more

Fork of X_NUCLEO_53L0A1 by ST Expansion SW Team

X-NUCLEO-53L0A1 Proximity Sensor Expansion Board Firmware Package

Introduction

This firmware package includes Component Device Drivers and the Board Support Package for STMicroelectronics' X-NUCLEO-53L0A1 Proximity sensor expansion board based on VL53L0X.

Firmware Library

Class X_NUCLEO_53L0A1 is intended to represent the Proximity sensor expansion board with the same name.

The expansion board provides support for the following components:

  1. on-board VL53L0X proximity sensor,
  2. up to two additional VL53L0X Satellites,
  3. on-board 4-digit display

It is intentionally implemented as a singleton because only one X-NUCLEO-VL53L0A1 may be deployed at a time in a HW component stack. In order to get the singleton instance you have to call class method `Instance()`, e.g.:

// Sensors expansion board singleton instance
static X_NUCLEO_53L0A1 *board = X_NUCLEO_53L0A1::Instance(device_i2c, A2, D8, D2);

Example Applications

The library and sample application code were tested against mbed revision 143, dated 26th May 2017.

Revision:
4:4e1576541eed
Parent:
1:01b8004bc0a7
Child:
7:35ecf3e060c3
--- a/Components/Interfaces/RangeSensor.h	Mon Nov 28 14:52:49 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,61 +0,0 @@
-/**
- ******************************************************************************
- * @file    RangeSensor.h
- * @author  AST / EST
- * @version V0.0.1
- * @date    13-April-2015
- * @brief   This file contains the abstract class describing in general
- *          the interfaces of a range sensor
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *   1. Redistributions of source code must retain the above copyright notice,
- *      this list of conditions and the following disclaimer.
- *   2. Redistributions in binary form must reproduce the above copyright notice,
- *      this list of conditions and the following disclaimer in the documentation
- *      and/or other materials provided with the distribution.
- *   3. Neither the name of STMicroelectronics nor the names of its contributors
- *      may be used to endorse or promote products derived from this software
- *      without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent from recursive inclusion --------------------------------*/
-#ifndef __RANGE_SENSOR_CLASS_H
-#define __RANGE_SENSOR_CLASS_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "GenericSensor.h"
-
-/* Classes  ------------------------------------------------------------------*/
-/** An abstract class for range sensors
- */
-class RangeSensor : public GenericSensor
-{
- public:
-    /**
-     * @brief       Get current range [mm]
-     * @param[out]  piData Pointer to where to store range to
-     * @return      0 in case of success, an error code otherwise
-     */
-    virtual int GetRange(int32_t *piData) = 0;
-};
-
-#endif /* __RANGE_SENSOR_CLASS_H */
-