X-NUCLEO-53L0A1 Proximity Sensor Expansion Board Firmware Package

Diff: Components/VL53L0X/VL53L0X_platform.h

Revision:

16:27d3d95c8593

Parent:

0:c523920bcc09

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Components/VL53L0X/VL53L0X_platform.h	Tue Aug 22 14:39:51 2017 +0000
@@ -0,0 +1,242 @@
+/*******************************************************************************
+Copyright © 2015, STMicroelectronics International N.V.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+    * Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+    * Redistributions in binary form must reproduce the above copyright
+      notice, this list of conditions and the following disclaimer in the
+      documentation and/or other materials provided with the distribution.
+    * Neither the name of STMicroelectronics nor the
+      names of its contributors may be used to endorse or promote products
+      derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
+NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
+IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+********************************************************************************/
+
+
+#ifndef _VL53L0X_PLATFORM_H_
+#define _VL53L0X_PLATFORM_H_
+
+#include "VL53L0X_def.h"
+#include "VL53L0X_platform_log.h"
+#include "VL53L0X_i2c_platform.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file vl53l0_platform.h
+ *
+ * @brief All end user OS/platform/application porting
+ */
+ 
+/**
+ * @defgroup VL53L0X_platform_group VL53L0 Platform Functions
+ * @brief    VL53L0 Platform Functions
+ *  @{
+ */
+
+/**
+ * @struct  VL53L0X_Dev_t
+ * @brief    Generic PAL device type that does link between API and platform abstraction layer
+ *
+ */
+typedef struct {
+    VL53L0X_DevData_t Data;               /*!< embed ST Ewok Dev  data as "Data"*/
+
+    /*!< user specific field */
+    uint8_t   I2cDevAddr;                /*!< i2c device address user specific field */
+    uint8_t   comms_type;                /*!< Type of comms : VL53L0X_COMMS_I2C or VL53L0X_COMMS_SPI */
+    uint16_t  comms_speed_khz;           /*!< Comms speed [kHz] : typically 400kHz for I2C           */
+
+} VL53L0X_Dev_t;
+
+
+/**
+ * @brief   Declare the device Handle as a pointer of the structure @a VL53L0X_Dev_t.
+ *
+ */
+typedef VL53L0X_Dev_t* VL53L0X_DEV;
+
+/**
+ * @def PALDevDataGet
+ * @brief Get ST private structure @a VL53L0X_DevData_t data access
+ *
+ * @param Dev       Device Handle
+ * @param field     ST structure field name
+ * It maybe used and as real data "ref" not just as "get" for sub-structure item
+ * like PALDevDataGet(FilterData.field)[i] or PALDevDataGet(FilterData.MeasurementIndex)++
+ */
+#define PALDevDataGet(Dev, field) (Dev->Data.field)
+
+/**
+ * @def PALDevDataSet(Dev, field, data)
+ * @brief  Set ST private structure @a VL53L0X_DevData_t data field
+ * @param Dev       Device Handle
+ * @param field     ST structure field name
+ * @param data      Data to be set
+ */
+#define PALDevDataSet(Dev, field, data) (Dev->Data.field)=(data)
+
+
+/**
+ * @defgroup VL53L0X_registerAccess_group PAL Register Access Functions
+ * @brief    PAL Register Access Functions
+ *  @{
+ */
+
+/**
+ * Lock comms interface to serialize all commands to a shared I2C interface for a specific device
+ * @param   Dev       Device Handle
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_LockSequenceAccess(VL53L0X_DEV Dev);
+
+/**
+ * Unlock comms interface to serialize all commands to a shared I2C interface for a specific device
+ * @param   Dev       Device Handle
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_UnlockSequenceAccess(VL53L0X_DEV Dev);
+
+
+/**
+ * Writes the supplied byte buffer to the device
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   pdata     Pointer to uint8_t buffer containing the data to be written
+ * @param   count     Number of bytes in the supplied byte buffer
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_WriteMulti(VL53L0X_DEV Dev, uint8_t index, uint8_t *pdata, uint32_t count);
+
+/**
+ * Reads the requested number of bytes from the device
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   pdata     Pointer to the uint8_t buffer to store read data
+ * @param   count     Number of uint8_t's to read
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_ReadMulti(VL53L0X_DEV Dev, uint8_t index, uint8_t *pdata, uint32_t count);
+
+/**
+ * Write single byte register
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   data      8 bit register data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_WrByte(VL53L0X_DEV Dev, uint8_t index, uint8_t data);
+
+/**
+ * Write word register
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   data      16 bit register data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_WrWord(VL53L0X_DEV Dev, uint8_t index, uint16_t data);
+
+/**
+ * Write double word (4 byte) register
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   data      32 bit register data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_WrDWord(VL53L0X_DEV Dev, uint8_t index, uint32_t data);
+
+/**
+ * Read single byte register
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   data      pointer to 8 bit data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_RdByte(VL53L0X_DEV Dev, uint8_t index, uint8_t *data);
+
+/**
+ * Read word (2byte) register
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   data      pointer to 16 bit data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_RdWord(VL53L0X_DEV Dev, uint8_t index, uint16_t *data);
+
+/**
+ * Read dword (4byte) register
+ * @param   Dev       Device Handle
+ * @param   index     The register index
+ * @param   data      pointer to 32 bit data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_RdDWord(VL53L0X_DEV Dev, uint8_t index, uint32_t *data);
+
+/**
+ * Threat safe Update (read/modify/write) single byte register
+ *
+ * Final_reg = (Initial_reg & and_data) |or_data
+ *
+ * @param   Dev        Device Handle
+ * @param   index      The register index
+ * @param   AndData    8 bit and data
+ * @param   OrData     8 bit or data
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_UpdateByte(VL53L0X_DEV Dev, uint8_t index, uint8_t AndData, uint8_t OrData);
+
+/** @} end of VL53L0X_registerAccess_group */
+
+    
+/**
+ * @brief execute delay in all polling API call
+ *
+ * A typical multi-thread or RTOs implementation is to sleep the task for some 5ms (with 100Hz max rate faster polling is not needed)
+ * if nothing specific is need you can define it as an empty/void macro
+ * @code
+ * #define VL53L0X_PollingDelay(...) (void)0
+ * @endcode
+ * @param Dev       Device Handle
+ * @return  VL53L0X_ERROR_NONE        Success
+ * @return  "Other error code"    See ::VL53L0X_Error
+ */
+VL53L0X_Error VL53L0X_PollingDelay(VL53L0X_DEV Dev); /* usually best implemented as a real function */
+
+/** @} end of VL53L0X_platform_group */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* _VL53L0X_PLATFORM_H_ */
+
+
+
+