Expansion SW library to control a bipolar stepper motor using X-NUCLEO-IHM05A1 expansion board based on L6208.
Dependencies: ST_INTERFACES
Dependents: HelloWorld_IHM05A1 TAU_ROTATING_PLATFORM_IHM05A1 Amaldi_13_Exercise_IHM05A1 Amaldi_13_Exercise_IHM05A1motore ... more
Fork of X-NUCLEO-IHM05A1 by
Motor Control Library
Library to handle the X-NUCLEO-IHM05A1 Motor Control Expansion Board based on the L6208 component.
It features the:
- Read and write of device parameters
- Configuration of GPIOs and IRQs (for enabling, direction, current decay and microstepping)
- Control of position, speed, acceleration and deceleration
- Command locking until the device completes movement
- Handling of overcurrent and thermal alarms (flag interrupt handling)
The API allows to easily:
- perform various positioning, moves and stops
- get/set or monitor the motor positions
- set home position and mark another position
- get/set minimum and maximum speed
- get current speed
- get/set acceleration and deceleration
- get/set the step mode (up to 1/16)
Board configuration
Platform compatibility
Compatible platforms have been tested with the configurations provided by the HelloWorld_IHM05A1 example.
Diff: Components/Interfaces/Component_class.h
- Revision:
- 3:63a8d672fe5e
- Parent:
- 2:2af31245e67e
- Child:
- 4:0b52159554b5
--- a/Components/Interfaces/Component_class.h Fri Apr 29 14:58:30 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,83 +0,0 @@
-/**
- ******************************************************************************
- * @file Component_class.h
- * @author AST
- * @version V1.0.0
- * @date April 13th, 2015
- * @brief This file contains the abstract class describing the interface of a
- * generic component.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-
-#ifndef __COMPONENT_CLASS_H
-#define __COMPONENT_CLASS_H
-
-
-/* Includes ------------------------------------------------------------------*/
-
-#include <stdint.h>
-
-
-/* Classes ------------------------------------------------------------------*/
-
-/** An abstract class for Generic components.
- */
-class Component
-{
-public:
- /**
- * @brief Initializing the component.
- * @param[in] init pointer to device specific initalization structure.
- * @retval "0" in case of success, an error code otherwise.
- */
- virtual int Init(void *init) = 0;
-
- /**
- * @brief Getting the ID of the component.
- * @param[out] id pointer to an allocated variable to store the ID into.
- * @retval "0" in case of success, an error code otherwise.
- */
- virtual int ReadID(uint8_t *id) = 0;
-
- /**
- * @brief Getting the version of the firmware.
- * @param None.
- * @retval The version of the firmware.
- */
- virtual unsigned int GetFwVersion(void) = 0;
-
-};
-
-#endif /* __COMPONENT_CLASS_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

X-NUCLEO-IHM05A1 Bipolar Stepper Motor Driver