Revision 3:e9269ff624ed, committed 2017-10-13

Comitter:

Davidroid

Date:

Fri Oct 13 22:03:48 2017 +0000

Parent:

2:d07edeaff6f1

Child:

4:d25c4fa216af

Commit message:

Astyle formatting.

Changed in this revision

--- a/VL53L0X.cpp	Fri Oct 13 15:31:04 2017 +0000
+++ b/VL53L0X.cpp	Fri Oct 13 22:03:48 2017 +0000
@@ -616,8 +616,9 @@
             status = VL53L0X_read_word(dev,
                                        VL53L0X_REG_FINAL_RANGE_CONFIG_MIN_COUNT_RATE_RTN_LIMIT,
                                        &temp16);
-            if (status == VL53L0X_ERROR_NONE)
+            if (status == VL53L0X_ERROR_NONE) {
                 temp_fix1616 = VL53L0X_FIXPOINT97TOFIXPOINT1616(temp16);
+            }
 
 
             enable_zero_value = 1;
@@ -642,8 +643,9 @@
             status = VL53L0X_read_word(dev,
                                        VL53L0X_REG_PRE_RANGE_MIN_COUNT_RATE_RTN_LIMIT,
                                        &temp16);
-            if (status == VL53L0X_ERROR_NONE)
+            if (status == VL53L0X_ERROR_NONE) {
                 temp_fix1616 = VL53L0X_FIXPOINT97TOFIXPOINT1616(temp16);
+            }
 
 
             enable_zero_value = 0;
@@ -716,10 +718,11 @@
     status = VL53L0X_read_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, &data);
     if (status == VL53L0X_ERROR_NONE) {
         PALDevDataSet(dev, SequenceConfig, data);
-        if (data & (0x01 << 7))
+        if (data & (0x01 << 7)) {
             *p_wrap_around_check_enable = 0x01;
-        else
+        } else {
             *p_wrap_around_check_enable = 0x00;
+        }
     }
     if (status == VL53L0X_ERROR_NONE) {
         VL53L0X_SETPARAMETERFIELD(dev, WrapAroundCheckEnable,
@@ -864,8 +867,9 @@
 
     /* Apply specific settings for the requested clock period */
 
-    if (status != VL53L0X_ERROR_NONE)
+    if (status != VL53L0X_ERROR_NONE) {
         return status;
+    }
 
 
     if (vcsel_period_type == VL53L0X_VCSEL_PERIOD_PRE_RANGE) {
@@ -1412,8 +1416,9 @@
                  &(p_device_parameters->InterMeasurementPeriodMilliSeconds));
 
 
-    if (status == VL53L0X_ERROR_NONE)
+    if (status == VL53L0X_ERROR_NONE) {
         p_device_parameters->XTalkCompensationEnable = 0;
+    }
 
     if (status == VL53L0X_ERROR_NONE)
         status = VL53L0X_get_x_talk_compensation_rate_mega_cps(dev,
@@ -1557,14 +1562,16 @@
 #endif
 
     /* Set I2C standard mode */
-    if (status == VL53L0X_ERROR_NONE)
+    if (status == VL53L0X_ERROR_NONE) {
         status = VL53L0X_write_byte(dev, 0x88, 0x00);
+    }
 
     VL53L0X_SETDEVICESPECIFICPARAMETER(dev, ReadDataFromDeviceDone, 0);
 
 #ifdef USE_IQC_STATION
-    if (Status == VL53L0X_ERROR_NONE)
+    if (Status == VL53L0X_ERROR_NONE) {
         Status = VL53L0X_apply_offset_adjustment(Dev);
+    }
 #endif
 
     /* Default value is 1000 for Linearity Corrective Gain */
@@ -1611,10 +1618,11 @@
 
     /* Enable all check */
     for (i = 0; i < VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS; i++) {
-        if (status == VL53L0X_ERROR_NONE)
+        if (status == VL53L0X_ERROR_NONE) {
             status |= VL53L0X_set_limit_check_enable(dev, i, 1);
-        else
+        } else {
             break;
+        }
 
     }
 
@@ -1671,8 +1679,9 @@
         PALDevDataSet(dev, PalState, VL53L0X_STATE_WAIT_STATICINIT);
     }
 
-    if (status == VL53L0X_ERROR_NONE)
+    if (status == VL53L0X_ERROR_NONE) {
         VL53L0X_SETDEVICESPECIFICPARAMETER(dev, RefSpadsInitialised, 0);
+    }
 
 
     LOG_FUNCTION_END(status);
@@ -2023,8 +2032,9 @@
      * this will be reset before the end of the function
      */
 
-    if (restore_config)
+    if (restore_config) {
         sequence_config = PALDevDataGet(dev, SequenceConfig);
+    }
 
     /* Run PhaseCal */
     status = VL53L0X_write_byte(dev, VL53L0X_REG_SYSTEM_SEQUENCE_CONFIG, 0x02);
@@ -2514,8 +2524,9 @@
                          && (status == VL53L0X_ERROR_NONE)
                          && (loop_nb < VL53L0X_DEFAULT_MAX_LOOP));
 
-                if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP)
+                if (loop_nb >= VL53L0X_DEFAULT_MAX_LOOP) {
                     status = VL53L0X_ERROR_TIME_OUT;
+                }
 
             }
 
@@ -2524,8 +2535,9 @@
             /* Back-to-back mode */
 
             /* Check if need to apply interrupt settings */
-            if (status == VL53L0X_ERROR_NONE)
+            if (status == VL53L0X_ERROR_NONE) {
                 status = VL53L0X_check_and_load_interrupt_settings(dev, 1);
+            }
 
             status = VL53L0X_write_byte(dev,
                                         VL53L0X_REG_SYSRANGE_START,
@@ -2538,8 +2550,9 @@
         case VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING:
             /* Continuous mode */
             /* Check if need to apply interrupt settings */
-            if (status == VL53L0X_ERROR_NONE)
+            if (status == VL53L0X_ERROR_NONE) {
                 status = VL53L0X_check_and_load_interrupt_settings(dev, 1);
+            }
 
             status = VL53L0X_write_byte(dev,
                                         VL53L0X_REG_SYSRANGE_START,
@@ -2586,8 +2599,9 @@
 
     /* Change PAL State in case of single ranging or single histogram */
     if (status == VL53L0X_ERROR_NONE
-            && device_mode == VL53L0X_DEVICEMODE_SINGLE_RANGING)
+            && device_mode == VL53L0X_DEVICEMODE_SINGLE_RANGING) {
         PALDevDataSet(dev, PalState, VL53L0X_STATE_IDLE);
+    }
 
 
     LOG_FUNCTION_END(status);
@@ -2708,8 +2722,9 @@
         if (num >= res + bit) {
             num -= res + bit;
             res = (res >> 1) + bit;
-        } else
+        } else {
             res >>= 1;
+        }
 
         bit >>= 2;
     }
@@ -3428,8 +3443,9 @@
     }
 
     /* DMAX only relevant during range error */
-    if (*p_pal_range_status == 0)
+    if (*p_pal_range_status == 0) {
         p_ranging_measurement_data->RangeDMaxMilliMeter = 0;
+    }
 
     /* fill the Limit Check Status */
 
@@ -3776,8 +3792,9 @@
      * Note that there are 6 bytes. Only the first 44 bits will be used to
      * represent spads.
      */
-    for (index = 0; index < spad_array_size; index++)
+    for (index = 0; index < spad_array_size; index++) {
         dev->Data.SpadData.RefSpadEnables[index] = 0;
+    }
 
 
     status = VL53L0X_write_byte(dev, 0xFF, 0x01);
@@ -4842,8 +4859,9 @@
 
     if (status == VL53L0X_ERROR_NONE) {
         status = VL53L0X_get_fraction_enable(dev, &tempbyte);
-        if (status == VL53L0X_ERROR_NONE)
+        if (status == VL53L0X_ERROR_NONE) {
             PALDevDataSet(dev, RangeFractionalEnable, tempbyte);
+        }
 
     }
 
@@ -5067,8 +5085,9 @@
 
     status = VL53L0X_i2c_read(Dev->I2cDevAddr, index, p_data, 1);
 
-    if (status)
+    if (status) {
         return -1;
+    }
 
     return 0;
 }
@@ -5429,8 +5448,9 @@
     }
 
     if (operating_mode == range_continuous_polling) {
-        if (Status == VL53L0X_ERROR_NONE)
+        if (Status == VL53L0X_ERROR_NONE) {
             Status = VL53L0X_measurement_poll_for_completion(_device);
+        }
 
         if (Status == VL53L0X_ERROR_NONE) {
             Status = VL53L0X_get_ranging_measurement_data(_device, p_data);