Diff: VL53L0X_def.h

Revision:

5:f16727052990

Parent:

4:d25c4fa216af

Child:

6:aa13392d16bb

--- a/VL53L0X_def.h	Mon Dec 18 08:27:21 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,640 +0,0 @@
-/*******************************************************************************
-Copyright © 2016, STMicroelectronics International N.V.
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-	* Redistributions of source code must retain the above copyright
-	  notice, this list of conditions and the following disclaimer.
-	* Redistributions in binary form must reproduce the above copyright
-	  notice, this list of conditions and the following disclaimer in the
-	  documentation and/or other materials provided with the distribution.
-	* Neither the name of STMicroelectronics nor the
-	  names of its contributors may be used to endorse or promote products
-	  derived from this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
-NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
-IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
-DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*******************************************************************************/
-
-/**
- * @file VL53L0X_def.h
- *
- * @brief Type definitions for VL53L0X API.
- *
- */
-
-
-#ifndef _VL53L0X_DEF_H_
-#define _VL53L0X_DEF_H_
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/** @defgroup VL53L0X_globaldefine_group VL53L0X Defines
- *	@brief	  VL53L0X Defines
- *	@{
- */
-
-
-/** PAL SPECIFICATION major version */
-#define VL53L0X10_SPECIFICATION_VER_MAJOR   1
-/** PAL SPECIFICATION minor version */
-#define VL53L0X10_SPECIFICATION_VER_MINOR   2
-/** PAL SPECIFICATION sub version */
-#define VL53L0X10_SPECIFICATION_VER_SUB	   7
-/** PAL SPECIFICATION sub version */
-#define VL53L0X10_SPECIFICATION_VER_REVISION 1440
-
-/** VL53L0X PAL IMPLEMENTATION major version */
-#define VL53L0X10_IMPLEMENTATION_VER_MAJOR	1
-/** VL53L0X PAL IMPLEMENTATION minor version */
-#define VL53L0X10_IMPLEMENTATION_VER_MINOR	0
-/** VL53L0X PAL IMPLEMENTATION sub version */
-#define VL53L0X10_IMPLEMENTATION_VER_SUB		9
-/** VL53L0X PAL IMPLEMENTATION sub version */
-#define VL53L0X10_IMPLEMENTATION_VER_REVISION	3673
-
-/** PAL SPECIFICATION major version */
-#define VL53L0X_SPECIFICATION_VER_MAJOR	 1
-/** PAL SPECIFICATION minor version */
-#define VL53L0X_SPECIFICATION_VER_MINOR	 2
-/** PAL SPECIFICATION sub version */
-#define VL53L0X_SPECIFICATION_VER_SUB	 7
-/** PAL SPECIFICATION sub version */
-#define VL53L0X_SPECIFICATION_VER_REVISION 1440
-
-/** VL53L0X PAL IMPLEMENTATION major version */
-#define VL53L0X_IMPLEMENTATION_VER_MAJOR	  1
-/** VL53L0X PAL IMPLEMENTATION minor version */
-#define VL53L0X_IMPLEMENTATION_VER_MINOR	  1
-/** VL53L0X PAL IMPLEMENTATION sub version */
-#define VL53L0X_IMPLEMENTATION_VER_SUB	  21
-/** VL53L0X PAL IMPLEMENTATION sub version */
-#define VL53L0X_IMPLEMENTATION_VER_REVISION	  4823
-#define VL53L0X_DEFAULT_MAX_LOOP 2000
-#define VL53L0X_MAX_STRING_LENGTH 32
-
-
-#include "VL53L0X_device.h"
-#include "VL53L0X_types.h"
-
-
-/****************************************
- * PRIVATE define do not edit
- ****************************************/
-
-/** @brief Defines the parameters of the Get Version Functions
- */
-typedef struct {
-    uint32_t	 revision; /*!< revision number */
-    uint8_t		 major;	   /*!< major number */
-    uint8_t		 minor;	   /*!< minor number */
-    uint8_t		 build;	   /*!< build number */
-} VL53L0X_Version_t;
-
-
-/** @brief Defines the parameters of the Get Device Info Functions
- */
-typedef struct {
-    char Name[VL53L0X_MAX_STRING_LENGTH];
-    /*!< Name of the Device e.g. Left_Distance */
-    char Type[VL53L0X_MAX_STRING_LENGTH];
-    /*!< Type of the Device e.g VL53L0X */
-    char ProductId[VL53L0X_MAX_STRING_LENGTH];
-    /*!< Product Identifier String	*/
-    uint8_t ProductType;
-    /*!< Product Type, VL53L0X = 1, VL53L1 = 2 */
-    uint8_t ProductRevisionMajor;
-    /*!< Product revision major */
-    uint8_t ProductRevisionMinor;
-    /*!< Product revision minor */
-} VL53L0X_DeviceInfo_t;
-
-
-/** @defgroup VL53L0X_define_Error_group Error and Warning code returned by API
- *	The following DEFINE are used to identify the PAL ERROR
- *	@{
- */
-
-typedef int8_t VL53L0X_Error;
-
-#define VL53L0X_ERROR_NONE		((VL53L0X_Error)	0)
-#define VL53L0X_ERROR_CALIBRATION_WARNING	((VL53L0X_Error) -1)
-/*!< Warning invalid calibration data may be in used
-	\a	VL53L0X_InitData()
-	\a VL53L0X_GetOffsetCalibrationData
-	\a VL53L0X_SetOffsetCalibrationData */
-#define VL53L0X_ERROR_MIN_CLIPPED			((VL53L0X_Error) -2)
-/*!< Warning parameter passed was clipped to min before to be applied */
-
-#define VL53L0X_ERROR_UNDEFINED				((VL53L0X_Error) -3)
-/*!< Unqualified error */
-#define VL53L0X_ERROR_INVALID_PARAMS			((VL53L0X_Error) -4)
-/*!< Parameter passed is invalid or out of range */
-#define VL53L0X_ERROR_NOT_SUPPORTED			((VL53L0X_Error) -5)
-/*!< Function is not supported in current mode or configuration */
-#define VL53L0X_ERROR_RANGE_ERROR			((VL53L0X_Error) -6)
-/*!< Device report a ranging error interrupt status */
-#define VL53L0X_ERROR_TIME_OUT				((VL53L0X_Error) -7)
-/*!< Aborted due to time out */
-#define VL53L0X_ERROR_MODE_NOT_SUPPORTED			((VL53L0X_Error) -8)
-/*!< Asked mode is not supported by the device */
-#define VL53L0X_ERROR_BUFFER_TOO_SMALL			((VL53L0X_Error) -9)
-/*!< ... */
-#define VL53L0X_ERROR_GPIO_NOT_EXISTING			((VL53L0X_Error) -10)
-/*!< User tried to setup a non-existing GPIO pin */
-#define VL53L0X_ERROR_GPIO_FUNCTIONALITY_NOT_SUPPORTED  ((VL53L0X_Error) -11)
-/*!< unsupported GPIO functionality */
-#define VL53L0X_ERROR_INTERRUPT_NOT_CLEARED		((VL53L0X_Error) -12)
-/*!< Error during interrupt clear */
-#define VL53L0X_ERROR_CONTROL_INTERFACE			((VL53L0X_Error) -20)
-/*!< error reported from IO functions */
-#define VL53L0X_ERROR_INVALID_COMMAND			((VL53L0X_Error) -30)
-/*!< The command is not allowed in the current device state
- *	(power down) */
-#define VL53L0X_ERROR_DIVISION_BY_ZERO			((VL53L0X_Error) -40)
-/*!< In the function a division by zero occurs */
-#define VL53L0X_ERROR_REF_SPAD_INIT			((VL53L0X_Error) -50)
-/*!< Error during reference SPAD initialization */
-#define VL53L0X_ERROR_NOT_IMPLEMENTED			((VL53L0X_Error) -99)
-/*!< Tells requested functionality has not been implemented yet or
- * not compatible with the device */
-/** @} VL53L0X_define_Error_group */
-
-
-/** @defgroup VL53L0X_define_DeviceModes_group Defines Device modes
- *	Defines all possible modes for the device
- *	@{
- */
-typedef uint8_t VL53L0X_DeviceModes;
-
-#define VL53L0X_DEVICEMODE_SINGLE_RANGING	((VL53L0X_DeviceModes)  0)
-#define VL53L0X_DEVICEMODE_CONTINUOUS_RANGING	((VL53L0X_DeviceModes)  1)
-#define VL53L0X_DEVICEMODE_SINGLE_HISTOGRAM	((VL53L0X_DeviceModes)  2)
-#define VL53L0X_DEVICEMODE_CONTINUOUS_TIMED_RANGING ((VL53L0X_DeviceModes) 3)
-#define VL53L0X_DEVICEMODE_SINGLE_ALS		((VL53L0X_DeviceModes) 10)
-#define VL53L0X_DEVICEMODE_GPIO_DRIVE		((VL53L0X_DeviceModes) 20)
-#define VL53L0X_DEVICEMODE_GPIO_OSC		((VL53L0X_DeviceModes) 21)
-/* ... Modes to be added depending on device */
-/** @} VL53L0X_define_DeviceModes_group */
-
-
-
-/** @defgroup VL53L0X_define_HistogramModes_group Defines Histogram modes
- *	Defines all possible Histogram modes for the device
- *	@{
- */
-typedef uint8_t VL53L0X_HistogramModes;
-
-#define VL53L0X_HISTOGRAMMODE_DISABLED		((VL53L0X_HistogramModes) 0)
-/*!< Histogram Disabled */
-#define VL53L0X_HISTOGRAMMODE_REFERENCE_ONLY	((VL53L0X_HistogramModes) 1)
-/*!< Histogram Reference array only */
-#define VL53L0X_HISTOGRAMMODE_RETURN_ONLY	((VL53L0X_HistogramModes) 2)
-/*!< Histogram Return array only */
-#define VL53L0X_HISTOGRAMMODE_BOTH		((VL53L0X_HistogramModes) 3)
-/*!< Histogram both Reference and Return Arrays */
-/* ... Modes to be added depending on device */
-/** @} VL53L0X_define_HistogramModes_group */
-
-
-/** @defgroup VL53L0X_define_PowerModes_group List of available Power Modes
- *	List of available Power Modes
- *	@{
- */
-
-typedef uint8_t VL53L0X_PowerModes;
-
-#define VL53L0X_POWERMODE_STANDBY_LEVEL1 ((VL53L0X_PowerModes) 0)
-/*!< Standby level 1 */
-#define VL53L0X_POWERMODE_STANDBY_LEVEL2 ((VL53L0X_PowerModes) 1)
-/*!< Standby level 2 */
-#define VL53L0X_POWERMODE_IDLE_LEVEL1	((VL53L0X_PowerModes) 2)
-/*!< Idle level 1 */
-#define VL53L0X_POWERMODE_IDLE_LEVEL2	((VL53L0X_PowerModes) 3)
-/*!< Idle level 2 */
-
-/** @} VL53L0X_define_PowerModes_group */
-
-
-/** @brief Defines all parameters for the device
- */
-typedef struct {
-    VL53L0X_DeviceModes DeviceMode;
-    /*!< Defines type of measurement to be done for the next measure */
-    VL53L0X_HistogramModes HistogramMode;
-    /*!< Defines type of histogram measurement to be done for the next
-     *	measure */
-    uint32_t MeasurementTimingBudgetMicroSeconds;
-    /*!< Defines the allowed total time for a single measurement */
-    uint32_t InterMeasurementPeriodMilliSeconds;
-    /*!< Defines time between two consecutive measurements (between two
-     *	measurement starts). If set to 0 means back-to-back mode */
-    uint8_t XTalkCompensationEnable;
-    /*!< Tells if Crosstalk compensation shall be enable or not	 */
-    uint16_t XTalkCompensationRangeMilliMeter;
-    /*!< CrossTalk compensation range in millimeter	 */
-    FixPoint1616_t XTalkCompensationRateMegaCps;
-    /*!< CrossTalk compensation rate in Mega counts per seconds.
-     *	Expressed in 16.16 fixed point format.	*/
-    int32_t RangeOffsetMicroMeters;
-    /*!< Range offset adjustment (mm).	*/
-
-    uint8_t LimitChecksEnable[VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS];
-    /*!< This Array store all the Limit Check enable for this device. */
-    uint8_t LimitChecksStatus[VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS];
-    /*!< This Array store all the Status of the check linked to last
-    * measurement. */
-    FixPoint1616_t LimitChecksValue[VL53L0X_CHECKENABLE_NUMBER_OF_CHECKS];
-    /*!< This Array store all the Limit Check value for this device */
-
-    uint8_t WrapAroundCheckEnable;
-    /*!< Tells if Wrap Around Check shall be enable or not */
-} VL53L0X_DeviceParameters_t;
-
-
-/** @defgroup VL53L0X_define_State_group Defines the current status of the device
- *	Defines the current status of the device
- *	@{
- */
-
-typedef uint8_t VL53L0X_State;
-
-#define VL53L0X_STATE_POWERDOWN		 ((VL53L0X_State)  0)
-/*!< Device is in HW reset	*/
-#define VL53L0X_STATE_WAIT_STATICINIT ((VL53L0X_State)  1)
-/*!< Device is initialized and wait for static initialization  */
-#define VL53L0X_STATE_STANDBY		 ((VL53L0X_State)  2)
-/*!< Device is in Low power Standby mode   */
-#define VL53L0X_STATE_IDLE			 ((VL53L0X_State)  3)
-/*!< Device has been initialized and ready to do measurements  */
-#define VL53L0X_STATE_RUNNING		 ((VL53L0X_State)  4)
-/*!< Device is performing measurement */
-#define VL53L0X_STATE_UNKNOWN		 ((VL53L0X_State)  98)
-/*!< Device is in unknown state and need to be rebooted	 */
-#define VL53L0X_STATE_ERROR			 ((VL53L0X_State)  99)
-/*!< Device is in error state and need to be rebooted  */
-
-/** @} VL53L0X_define_State_group */
-
-
-/** @brief Structure containing the Dmax computation parameters and data
- */
-typedef struct {
-    int32_t AmbTuningWindowFactor_K;
-    /*!<  internal algo tuning (*1000) */
-    int32_t RetSignalAt0mm;
-    /*!< intermediate dmax computation value caching */
-} VL53L0X_DMaxData_t;
-
-/**
- * @struct VL53L0X_RangeData_t
- * @brief Range measurement data.
- */
-typedef struct {
-    uint32_t TimeStamp;		/*!< 32-bit time stamp. */
-    uint32_t MeasurementTimeUsec;
-    /*!< Give the Measurement time needed by the device to do the
-     * measurement.*/
-
-
-    uint16_t RangeMilliMeter;	/*!< range distance in millimeter. */
-
-    uint16_t RangeDMaxMilliMeter;
-    /*!< Tells what is the maximum detection distance of the device
-     * in current setup and environment conditions (Filled when
-     *	applicable) */
-
-    FixPoint1616_t SignalRateRtnMegaCps;
-    /*!< Return signal rate (MCPS)\n these is a 16.16 fix point
-     *	value, which is effectively a measure of target
-     *	 reflectance.*/
-    FixPoint1616_t AmbientRateRtnMegaCps;
-    /*!< Return ambient rate (MCPS)\n these is a 16.16 fix point
-     *	value, which is effectively a measure of the ambien
-     *	t light.*/
-
-    uint16_t EffectiveSpadRtnCount;
-    /*!< Return the effective SPAD count for the return signal.
-     *	To obtain Real value it should be divided by 256 */
-
-    uint8_t ZoneId;
-    /*!< Denotes which zone and range scheduler stage the range
-     *	data relates to. */
-    uint8_t RangeFractionalPart;
-    /*!< Fractional part of range distance. Final value is a
-     *	FixPoint168 value. */
-    uint8_t RangeStatus;
-    /*!< Range Status for the current measurement. This is device
-     *	dependent. Value = 0 means value is valid.
-     *	See \ref RangeStatusPage */
-} VL53L0X_RangingMeasurementData_t;
-
-
-#define VL53L0X_HISTOGRAM_BUFFER_SIZE 24
-
-/**
- * @struct VL53L0X_HistogramData_t
- * @brief Histogram measurement data.
- */
-typedef struct {
-    /* Histogram Measurement data */
-    uint32_t HistogramData[VL53L0X_HISTOGRAM_BUFFER_SIZE];
-    /*!< Histogram data */
-    uint8_t HistogramType; /*!< Indicate the types of histogram data :
-	Return only, Reference only, both Return and Reference */
-    uint8_t FirstBin; /*!< First Bin value */
-    uint8_t BufferSize; /*!< Buffer Size - Set by the user.*/
-    uint8_t NumberOfBins;
-    /*!< Number of bins filled by the histogram measurement */
-
-    VL53L0X_DeviceError ErrorStatus;
-    /*!< Error status of the current measurement. \n
-    see @a ::VL53L0X_DeviceError @a VL53L0X_GetStatusErrorString() */
-} VL53L0X_HistogramMeasurementData_t;
-
-#define VL53L0X_REF_SPAD_BUFFER_SIZE 6
-
-/**
- * @struct VL53L0X_SpadData_t
- * @brief Spad Configuration Data.
- */
-typedef struct {
-    uint8_t RefSpadEnables[VL53L0X_REF_SPAD_BUFFER_SIZE];
-    /*!< Reference Spad Enables */
-    uint8_t RefGoodSpadMap[VL53L0X_REF_SPAD_BUFFER_SIZE];
-    /*!< Reference Spad Good Spad Map */
-} VL53L0X_SpadData_t;
-
-typedef struct {
-    FixPoint1616_t OscFrequencyMHz; /* Frequency used */
-
-    uint16_t LastEncodedTimeout;
-    /* last encoded Time out used for timing budget*/
-
-    VL53L0X_GpioFunctionality Pin0GpioFunctionality;
-    /* store the functionality of the GPIO: pin0 */
-
-    uint32_t FinalRangeTimeoutMicroSecs;
-    /*!< Execution time of the final range*/
-    uint8_t FinalRangeVcselPulsePeriod;
-    /*!< Vcsel pulse period (pll clocks) for the final range measurement*/
-    uint32_t PreRangeTimeoutMicroSecs;
-    /*!< Execution time of the final range*/
-    uint8_t PreRangeVcselPulsePeriod;
-    /*!< Vcsel pulse period (pll clocks) for the pre-range measurement*/
-
-    uint16_t SigmaEstRefArray;
-    /*!< Reference array sigma value in 1/100th of [mm] e.g. 100 = 1mm */
-    uint16_t SigmaEstEffPulseWidth;
-    /*!< Effective Pulse width for sigma estimate in 1/100th
-     * of ns e.g. 900 = 9.0ns */
-    uint16_t SigmaEstEffAmbWidth;
-    /*!< Effective Ambient width for sigma estimate in 1/100th of ns
-     * e.g. 500 = 5.0ns */
-
-
-    uint8_t ReadDataFromDeviceDone; /* Indicate if read from device has
-	been done (==1) or not (==0) */
-    uint8_t ModuleId; /* Module ID */
-    uint8_t Revision; /* test Revision */
-    char ProductId[VL53L0X_MAX_STRING_LENGTH];
-    /* Product Identifier String  */
-    uint8_t ReferenceSpadCount; /* used for ref spad management */
-    uint8_t ReferenceSpadType;	/* used for ref spad management */
-    uint8_t RefSpadsInitialised; /* reports if ref spads are initialised. */
-    uint32_t PartUIDUpper; /*!< Unique Part ID Upper */
-    uint32_t PartUIDLower; /*!< Unique Part ID Lower */
-    FixPoint1616_t SignalRateMeasFixed400mm; /*!< Peek Signal rate
-	at 400 mm*/
-
-} VL53L0X_DeviceSpecificParameters_t;
-
-/**
- * @struct VL53L0X_DevData_t
- *
- * @brief VL53L0X PAL device ST private data structure \n
- * End user should never access any of these field directly
- *
- * These must never access directly but only via macro
- */
-typedef struct {
-    VL53L0X_DMaxData_t DMaxData;
-    /*!< Dmax Data */
-    int32_t	 Part2PartOffsetNVMMicroMeter;
-    /*!< backed up NVM value */
-    int32_t	 Part2PartOffsetAdjustmentNVMMicroMeter;
-    /*!< backed up NVM value representing additional offset adjustment */
-    VL53L0X_DeviceParameters_t CurrentParameters;
-    /*!< Current Device Parameter */
-    VL53L0X_RangingMeasurementData_t LastRangeMeasure;
-    /*!< Ranging Data */
-    VL53L0X_HistogramMeasurementData_t LastHistogramMeasure;
-    /*!< Histogram Data */
-    VL53L0X_DeviceSpecificParameters_t DeviceSpecificParameters;
-    /*!< Parameters specific to the device */
-    VL53L0X_SpadData_t SpadData;
-    /*!< Spad Data */
-    uint8_t SequenceConfig;
-    /*!< Internal value for the sequence config */
-    uint8_t RangeFractionalEnable;
-    /*!< Enable/Disable fractional part of ranging data */
-    VL53L0X_State PalState;
-    /*!< Current state of the PAL for this device */
-    VL53L0X_PowerModes PowerMode;
-    /*!< Current Power Mode	 */
-    uint16_t SigmaEstRefArray;
-    /*!< Reference array sigma value in 1/100th of [mm] e.g. 100 = 1mm */
-    uint16_t SigmaEstEffPulseWidth;
-    /*!< Effective Pulse width for sigma estimate in 1/100th
-    * of ns e.g. 900 = 9.0ns */
-    uint16_t SigmaEstEffAmbWidth;
-    /*!< Effective Ambient width for sigma estimate in 1/100th of ns
-    * e.g. 500 = 5.0ns */
-    uint8_t StopVariable;
-    /*!< StopVariable used during the stop sequence */
-    uint16_t targetRefRate;
-    /*!< Target Ambient Rate for Ref spad management */
-    FixPoint1616_t SigmaEstimate;
-    /*!< Sigma Estimate - based on ambient & VCSEL rates and
-    * signal_total_events */
-    FixPoint1616_t SignalEstimate;
-    /*!< Signal Estimate - based on ambient & VCSEL rates and cross talk */
-    FixPoint1616_t LastSignalRefMcps;
-    /*!< Latest Signal ref in Mcps */
-    uint8_t *pTuningSettingsPointer;
-    /*!< Pointer for Tuning Settings table */
-    uint8_t UseInternalTuningSettings;
-    /*!< Indicate if we use	 Tuning Settings table */
-    uint16_t LinearityCorrectiveGain;
-    /*!< Linearity Corrective Gain value in x1000 */
-    uint16_t DmaxCalRangeMilliMeter;
-    /*!< Dmax Calibration Range millimeter */
-    FixPoint1616_t DmaxCalSignalRateRtnMegaCps;
-    /*!< Dmax Calibration Signal Rate Return MegaCps */
-
-} VL53L0X_DevData_t;
-
-
-/** @defgroup VL53L0X_define_InterruptPolarity_group Defines the Polarity
- * of the Interrupt
- *	Defines the Polarity of the Interrupt
- *	@{
- */
-typedef uint8_t VL53L0X_InterruptPolarity;
-
-#define VL53L0X_INTERRUPTPOLARITY_LOW	   ((VL53L0X_InterruptPolarity)	0)
-/*!< Set active low polarity best setup for falling edge. */
-#define VL53L0X_INTERRUPTPOLARITY_HIGH	   ((VL53L0X_InterruptPolarity)	1)
-/*!< Set active high polarity best setup for rising edge. */
-
-/** @} VL53L0X_define_InterruptPolarity_group */
-
-
-/** @defgroup VL53L0X_define_VcselPeriod_group Vcsel Period Defines
- *	Defines the range measurement for which to access the vcsel period.
- *	@{
- */
-typedef uint8_t VL53L0X_VcselPeriod;
-
-#define VL53L0X_VCSEL_PERIOD_PRE_RANGE	((VL53L0X_VcselPeriod) 0)
-/*!<Identifies the pre-range vcsel period. */
-#define VL53L0X_VCSEL_PERIOD_FINAL_RANGE ((VL53L0X_VcselPeriod) 1)
-/*!<Identifies the final range vcsel period. */
-
-/** @} VL53L0X_define_VcselPeriod_group */
-
-/** @defgroup VL53L0X_define_SchedulerSequence_group Defines the steps
- * carried out by the scheduler during a range measurement.
- *	@{
- *	Defines the states of all the steps in the scheduler
- *	i.e. enabled/disabled.
- */
-typedef struct {
-    uint8_t		 TccOn;	   /*!<Reports if Target Centre Check On  */
-    uint8_t		 MsrcOn;	   /*!<Reports if MSRC On  */
-    uint8_t		 DssOn;		   /*!<Reports if DSS On  */
-    uint8_t		 PreRangeOn;   /*!<Reports if Pre-Range On	*/
-    uint8_t		 FinalRangeOn; /*!<Reports if Final-Range On  */
-} VL53L0X_SchedulerSequenceSteps_t;
-
-/** @} VL53L0X_define_SchedulerSequence_group */
-
-/** @defgroup VL53L0X_define_SequenceStepId_group Defines the Polarity
- *	of the Interrupt
- *	Defines the the sequence steps performed during ranging..
- *	@{
- */
-typedef uint8_t VL53L0X_SequenceStepId;
-
-#define	 VL53L0X_SEQUENCESTEP_TCC		 ((VL53L0X_VcselPeriod) 0)
-/*!<Target CentreCheck identifier. */
-#define	 VL53L0X_SEQUENCESTEP_DSS		 ((VL53L0X_VcselPeriod) 1)
-/*!<Dynamic Spad Selection function Identifier. */
-#define	 VL53L0X_SEQUENCESTEP_MSRC		 ((VL53L0X_VcselPeriod) 2)
-/*!<Minimum Signal Rate Check function Identifier. */
-#define	 VL53L0X_SEQUENCESTEP_PRE_RANGE	 ((VL53L0X_VcselPeriod) 3)
-/*!<Pre-Range check Identifier. */
-#define	 VL53L0X_SEQUENCESTEP_FINAL_RANGE ((VL53L0X_VcselPeriod) 4)
-/*!<Final Range Check Identifier. */
-
-#define	 VL53L0X_SEQUENCESTEP_NUMBER_OF_CHECKS			 5
-/*!<Number of Sequence Step Managed by the API. */
-
-/** @} VL53L0X_define_SequenceStepId_group */
-
-
-/* MACRO Definitions */
-/** @defgroup VL53L0X_define_GeneralMacro_group General Macro Defines
- *	General Macro Defines
- *	@{
- */
-
-/* Defines */
-#define VL53L0X_SETPARAMETERFIELD(Dev, field, value) \
-	PALDevDataSet(Dev, CurrentParameters.field, value)
-
-#define VL53L0X_GETPARAMETERFIELD(Dev, field, variable) \
-	variable = PALDevDataGet(Dev, CurrentParameters).field
-
-
-#define VL53L0X_SETARRAYPARAMETERFIELD(Dev, field, index, value) \
-	PALDevDataSet(Dev, CurrentParameters.field[index], value)
-
-#define VL53L0X_GETARRAYPARAMETERFIELD(Dev, field, index, variable) \
-	variable = PALDevDataGet(Dev, CurrentParameters).field[index]
-
-
-#define VL53L0X_SETDEVICESPECIFICPARAMETER(Dev, field, value) \
-		PALDevDataSet(Dev, DeviceSpecificParameters.field, value)
-
-#define VL53L0X_GETDEVICESPECIFICPARAMETER(Dev, field) \
-		PALDevDataGet(Dev, DeviceSpecificParameters).field
-
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT97(Value) \
-	(uint16_t)((Value>>9)&0xFFFF)
-#define VL53L0X_FIXPOINT97TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<9)
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT88(Value) \
-	(uint16_t)((Value>>8)&0xFFFF)
-#define VL53L0X_FIXPOINT88TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<8)
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT412(Value) \
-	(uint16_t)((Value>>4)&0xFFFF)
-#define VL53L0X_FIXPOINT412TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<4)
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT313(Value) \
-	(uint16_t)((Value>>3)&0xFFFF)
-#define VL53L0X_FIXPOINT313TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<3)
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT08(Value) \
-	(uint8_t)((Value>>8)&0x00FF)
-#define VL53L0X_FIXPOINT08TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<8)
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT53(Value) \
-	(uint8_t)((Value>>13)&0x00FF)
-#define VL53L0X_FIXPOINT53TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<13)
-
-#define VL53L0X_FIXPOINT1616TOFIXPOINT102(Value) \
-	(uint16_t)((Value>>14)&0x0FFF)
-#define VL53L0X_FIXPOINT102TOFIXPOINT1616(Value) \
-	(FixPoint1616_t)(Value<<12)
-
-#define VL53L0X_MAKEUINT16(lsb, msb) (uint16_t)((((uint16_t)msb)<<8) + \
-		(uint16_t)lsb)
-
-/** @} VL53L0X_define_GeneralMacro_group */
-
-/** @} VL53L0X_globaldefine_group */
-
-
-
-
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* _VL53L0X_DEF_H_ */