ST / Mbed 2 deprecated Tilt_IKS01A2

Example of tilt detection for LSM6DSL in X-NUCLEO-IKS01A2

Dependencies:   X_NUCLEO_IKS01A2 mbed

Fork of Tilt_IKS01A2 by ST Expansion SW Team

Tilt Detection Demo Application based on sensor expansion board X-NUCLEO-IKS01A2

Main function is to show how to detect the tilt event using the sensor expansion board and send a notification using UART to a connected PC or Desktop and display it on terminal applications like TeraTerm.
After connection has been established:
- the user can try to tilt the board and then view the notification using an hyper terminal. When the tilt event is detected, the LED is switched on for a while.
- the user button can be used to enable/disable the tilt detection feature.

X_NUCLEO_IKS01A2/x_nucleo_iks01a2_targets.h@0:489965565a0d, 2016-08-12 (annotated)

Committer:
cparata
Date:
Fri Aug 12 13:42:49 2016 +0000
Revision:
0:489965565a0d
Child:
5:a62aec1093d6
First release of Tilt Detection for LSM6DSL in IKS01A2

Who changed what in which revision?

UserRevisionLine numberNew contents of line
cparata 0:489965565a0d 1 /**
cparata 0:489965565a0d 2 ******************************************************************************
cparata 0:489965565a0d 3 * @file x_nucleo_iks01a2_targets.h
cparata 0:489965565a0d 4 * @author AST / EST
cparata 0:489965565a0d 5 * @version V0.0.1
cparata 0:489965565a0d 6 * @date 9-August-2016
cparata 0:489965565a0d 7 * @brief This header file is intended to manage the differences between
cparata 0:489965565a0d 8 * the different supported base-boards which might mount the
cparata 0:489965565a0d 9 * X_NUCLEO_IKS01A2 MEMS Inertial & Environmental Nucleo Expansion Board.
cparata 0:489965565a0d 10 ******************************************************************************
cparata 0:489965565a0d 11 * @attention
cparata 0:489965565a0d 12 *
cparata 0:489965565a0d 13 * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
cparata 0:489965565a0d 14 *
cparata 0:489965565a0d 15 * Redistribution and use in source and binary forms, with or without modification,
cparata 0:489965565a0d 16 * are permitted provided that the following conditions are met:
cparata 0:489965565a0d 17 * 1. Redistributions of source code must retain the above copyright notice,
cparata 0:489965565a0d 18 * this list of conditions and the following disclaimer.
cparata 0:489965565a0d 19 * 2. Redistributions in binary form must reproduce the above copyright notice,
cparata 0:489965565a0d 20 * this list of conditions and the following disclaimer in the documentation
cparata 0:489965565a0d 21 * and/or other materials provided with the distribution.
cparata 0:489965565a0d 22 * 3. Neither the name of STMicroelectronics nor the names of its contributors
cparata 0:489965565a0d 23 * may be used to endorse or promote products derived from this software
cparata 0:489965565a0d 24 * without specific prior written permission.
cparata 0:489965565a0d 25 *
cparata 0:489965565a0d 26 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
cparata 0:489965565a0d 27 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
cparata 0:489965565a0d 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
cparata 0:489965565a0d 29 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
cparata 0:489965565a0d 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
cparata 0:489965565a0d 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
cparata 0:489965565a0d 32 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
cparata 0:489965565a0d 33 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
cparata 0:489965565a0d 34 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
cparata 0:489965565a0d 35 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
cparata 0:489965565a0d 36 *
cparata 0:489965565a0d 37 ******************************************************************************
cparata 0:489965565a0d 38 */
cparata 0:489965565a0d 39
cparata 0:489965565a0d 40 /* Define to prevent from recursive inclusion --------------------------------*/
cparata 0:489965565a0d 41 #ifndef _X_NUCLEO_IKS01A2_TARGETS_H_
cparata 0:489965565a0d 42 #define _X_NUCLEO_IKS01A2_TARGETS_H_
cparata 0:489965565a0d 43
cparata 0:489965565a0d 44 /*** I2C ***/
cparata 0:489965565a0d 45 /* Use Arduino I2C Connectors */
cparata 0:489965565a0d 46 #define IKS01A2_PIN_I2C_SDA (D14)
cparata 0:489965565a0d 47 #define IKS01A2_PIN_I2C_SCL (D15)
cparata 0:489965565a0d 48
cparata 0:489965565a0d 49 /* LSM6DSL INT1 */
cparata 0:489965565a0d 50 #define IKS01A2_PIN_LSM6DSL_INT1 (D4)
cparata 0:489965565a0d 51
cparata 0:489965565a0d 52 #endif // _X_NUCLEO_IKS01A2_TARGETS_H_