Tilt_IKS01A2 - Example of tilt detection for LSM6DSL in X-NUCLEO…

ST » Code » Tilt_IKS01A2

Example of tilt detection for LSM6DSL in X-NUCLEO-IKS01A2

Fork of Tilt_IKS01A2 by ST Expansion SW Team

Tilt Detection Demo Application based on sensor expansion board X-NUCLEO-IKS01A2

Main function is to show how to detect the tilt event using the sensor expansion board and send a notification using UART to a connected PC or Desktop and display it on terminal applications like TeraTerm.
After connection has been established:
- the user can try to tilt the board and then view the notification using an hyper terminal. When the tilt event is detected, the LED is switched on for a while.
- the user button can be used to enable/disable the tilt detection feature.

X_NUCLEO_IKS01A2/Components/LPS22HBSensor/LPS22HB_Driver.h@2:39ad2a393143, 2016-08-19 (annotated)

Committer:: cparata
Date:: Fri Aug 19 12:34:01 2016 +0000
Revision:: 2:39ad2a393143
Parent:: 0:489965565a0d

Add interfaces to all components

Who changed what in which revision?

User	Revision	Line number	New contents of line
cparata	0:489965565a0d	1	/**
cparata	0:489965565a0d	2	******************************************************************************
cparata	0:489965565a0d	3	* @file LPS22HB_Driver.h
cparata	0:489965565a0d	4	* @author HESA Application Team
cparata	0:489965565a0d	5	* @version V1.1
cparata	0:489965565a0d	6	* @date 10-August-2016
cparata	0:489965565a0d	7	* @brief LPS22HB driver header file
cparata	0:489965565a0d	8	******************************************************************************
cparata	0:489965565a0d	9	* @attention
cparata	0:489965565a0d	10	*
cparata	0:489965565a0d	11	* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
cparata	0:489965565a0d	12	*
cparata	0:489965565a0d	13	* Redistribution and use in source and binary forms, with or without modification,
cparata	0:489965565a0d	14	* are permitted provided that the following conditions are met:
cparata	0:489965565a0d	15	* 1. Redistributions of source code must retain the above copyright notice,
cparata	0:489965565a0d	16	* this list of conditions and the following disclaimer.
cparata	0:489965565a0d	17	* 2. Redistributions in binary form must reproduce the above copyright notice,
cparata	0:489965565a0d	18	* this list of conditions and the following disclaimer in the documentation
cparata	0:489965565a0d	19	* and/or other materials provided with the distribution.
cparata	0:489965565a0d	20	* 3. Neither the name of STMicroelectronics nor the names of its contributors
cparata	0:489965565a0d	21	* may be used to endorse or promote products derived from this software
cparata	0:489965565a0d	22	* without specific prior written permission.
cparata	0:489965565a0d	23	*
cparata	0:489965565a0d	24	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
cparata	0:489965565a0d	25	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
cparata	0:489965565a0d	26	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
cparata	0:489965565a0d	27	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
cparata	0:489965565a0d	28	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
cparata	0:489965565a0d	29	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
cparata	0:489965565a0d	30	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
cparata	0:489965565a0d	31	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
cparata	0:489965565a0d	32	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
cparata	0:489965565a0d	33	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
cparata	0:489965565a0d	34	*
cparata	0:489965565a0d	35	******************************************************************************
cparata	0:489965565a0d	36	*/
cparata	0:489965565a0d	37
cparata	0:489965565a0d	38	/* Define to prevent recursive inclusion -------------------------------------*/
cparata	0:489965565a0d	39	#ifndef __LPS22HB_DRIVER__H
cparata	0:489965565a0d	40	#define __LPS22HB_DRIVER__H
cparata	0:489965565a0d	41
cparata	0:489965565a0d	42	#include <stdint.h>
cparata	0:489965565a0d	43
cparata	0:489965565a0d	44	#ifdef __cplusplus
cparata	0:489965565a0d	45	extern "C" {
cparata	0:489965565a0d	46	#endif
cparata	0:489965565a0d	47
cparata	0:489965565a0d	48	// the user must include the proper file where HAL_ReadReg and HAL_WriteReg are implemented
cparata	0:489965565a0d	49	//#include "HAL_EnvSensors.h"
cparata	0:489965565a0d	50
cparata	0:489965565a0d	51	/* Uncomment the line below to expanse the "assert_param" macro in the drivers code */
cparata	0:489965565a0d	52	//#define USE_FULL_ASSERT_LPS22HB
cparata	0:489965565a0d	53
cparata	0:489965565a0d	54	/* Exported macro ------------------------------------------------------------*/
cparata	0:489965565a0d	55	#ifdef USE_FULL_ASSERT_LPS22HB
cparata	0:489965565a0d	56
cparata	0:489965565a0d	57	/**
cparata	0:489965565a0d	58	* @brief The assert_param macro is used for function's parameters check.
cparata	0:489965565a0d	59	* @param expr: If expr is false, it calls assert_failed function which reports
cparata	0:489965565a0d	60	* the name of the source file and the source line number of the call
cparata	0:489965565a0d	61	* that failed. If expr is true, it returns no value.
cparata	0:489965565a0d	62	* @retval None
cparata	0:489965565a0d	63	*/
cparata	0:489965565a0d	64	#define LPS22HB_assert_param(expr) ((expr) ? (void)0 : LPS22HB_assert_failed((uint8_t *)__FILE__, __LINE__))
cparata	0:489965565a0d	65	/* Exported functions ------------------------------------------------------- */
cparata	0:489965565a0d	66	void LPS22HB_assert_failed(uint8_t* file, uint32_t line);
cparata	0:489965565a0d	67	#else
cparata	0:489965565a0d	68	#define LPS22HB_assert_param(expr) ((void)0)
cparata	0:489965565a0d	69	#endif /* USE_FULL_ASSERT_LPS22HB */
cparata	0:489965565a0d	70
cparata	0:489965565a0d	71	/** @addtogroup Environmental_Sensor
cparata	0:489965565a0d	72	* @{
cparata	0:489965565a0d	73	*/
cparata	0:489965565a0d	74
cparata	0:489965565a0d	75	/** @addtogroup LPS22HB_DRIVER
cparata	0:489965565a0d	76	* @{
cparata	0:489965565a0d	77	*/
cparata	0:489965565a0d	78
cparata	0:489965565a0d	79	/* Exported Types -------------------------------------------------------------*/
cparata	0:489965565a0d	80	/** @defgroup LPS22HB_Exported_Types
cparata	0:489965565a0d	81	* @{
cparata	0:489965565a0d	82	*/
cparata	0:489965565a0d	83
cparata	0:489965565a0d	84	/**
cparata	0:489965565a0d	85	* @brief Error type.
cparata	0:489965565a0d	86	*/
cparata	0:489965565a0d	87	typedef enum {LPS22HB_OK = (uint8_t)0, LPS22HB_ERROR = !LPS22HB_OK} LPS22HB_Error_et;
cparata	0:489965565a0d	88
cparata	0:489965565a0d	89	/**
cparata	0:489965565a0d	90	* @brief Enable/Disable type.
cparata	0:489965565a0d	91	*/
cparata	0:489965565a0d	92	typedef enum {LPS22HB_DISABLE = (uint8_t)0, LPS22HB_ENABLE = !LPS22HB_DISABLE} LPS22HB_State_et;
cparata	0:489965565a0d	93	#define IS_LPS22HB_State(MODE) ((MODE == LPS22HB_ENABLE) \|\| (MODE == LPS22HB_DISABLE) )
cparata	0:489965565a0d	94
cparata	0:489965565a0d	95	/**
cparata	0:489965565a0d	96	* @brief Bit status type.
cparata	0:489965565a0d	97	*/
cparata	0:489965565a0d	98	typedef enum {LPS22HB_RESET = (uint8_t)0, LPS22HB_SET = !LPS22HB_RESET} LPS22HB_BitStatus_et;
cparata	0:489965565a0d	99	#define IS_LPS22HB_BitStatus(MODE) ((MODE == LPS22HB_RESET) \|\| (MODE == LPS22HB_SET))
cparata	0:489965565a0d	100
cparata	0:489965565a0d	101	/RES_CONF see LC_EN bit/
cparata	0:489965565a0d	102	/**
cparata	0:489965565a0d	103	* @brief LPS22HB Power/Noise Mode configuration.
cparata	0:489965565a0d	104	*/
cparata	0:489965565a0d	105	typedef enum {
cparata	0:489965565a0d	106	LPS22HB_LowNoise = (uint8_t)0x00, /!< Low Noise mode /
cparata	0:489965565a0d	107	LPS22HB_LowPower = (uint8_t)0x01 /!< Low Current mode /
cparata	0:489965565a0d	108	} LPS22HB_PowerMode_et;
cparata	0:489965565a0d	109
cparata	0:489965565a0d	110	#define IS_LPS22HB_PowerMode(MODE) ((MODE == LPS22HB_LowNoise) \|\| (MODE == LPS22HB_LowPower))
cparata	0:489965565a0d	111
cparata	0:489965565a0d	112	/**
cparata	0:489965565a0d	113	* @brief Output data rate configuration.
cparata	0:489965565a0d	114	*/
cparata	0:489965565a0d	115	typedef enum {
cparata	0:489965565a0d	116
cparata	0:489965565a0d	117	LPS22HB_ODR_ONE_SHOT = (uint8_t)0x00, /!< Output Data Rate: one shot /
cparata	0:489965565a0d	118	LPS22HB_ODR_1HZ = (uint8_t)0x10, /!< Output Data Rate: 1Hz /
cparata	0:489965565a0d	119	LPS22HB_ODR_10HZ = (uint8_t)0x20, /!< Output Data Rate: 10Hz /
cparata	0:489965565a0d	120	LPS22HB_ODR_25HZ = (uint8_t)0x30, /!< Output Data Rate: 25Hz /
cparata	0:489965565a0d	121	LPS22HB_ODR_50HZ = (uint8_t)0x40, /!< Output Data Rate: 50Hz /
cparata	0:489965565a0d	122	LPS22HB_ODR_75HZ = (uint8_t)0x50 /!< Output Data Rate: 75Hz /
cparata	0:489965565a0d	123	} LPS22HB_Odr_et;
cparata	0:489965565a0d	124
cparata	0:489965565a0d	125	#define IS_LPS22HB_ODR(ODR) ((ODR == LPS22HB_ODR_ONE_SHOT) \|\| (ODR == LPS22HB_ODR_1HZ) \|\| \
cparata	0:489965565a0d	126	(ODR == LPS22HB_ODR_10HZ) \|\| (ODR == LPS22HB_ODR_25HZ)\|\| (ODR == LPS22HB_ODR_50HZ) \|\| (ODR == LPS22HB_ODR_75HZ))
cparata	0:489965565a0d	127
cparata	0:489965565a0d	128	/**
cparata	0:489965565a0d	129	* @brief Low Pass Filter Cutoff Configuration.
cparata	0:489965565a0d	130	*/
cparata	0:489965565a0d	131	typedef enum {
cparata	0:489965565a0d	132
cparata	0:489965565a0d	133	LPS22HB_ODR_9 = (uint8_t)0x00, /!< Filter Cutoff ODR/9 /
cparata	0:489965565a0d	134	LPS22HB_ODR_20 = (uint8_t)0x04 /!< Filter Cutoff ODR/20 /
cparata	0:489965565a0d	135	} LPS22HB_LPF_Cutoff_et;
cparata	0:489965565a0d	136
cparata	0:489965565a0d	137	#define IS_LPS22HB_LPF_Cutoff(CUTOFF) ((CUTOFF == LPS22HB_ODR_9) \|\| (CUTOFF == LPS22HB_ODR_20) )
cparata	0:489965565a0d	138
cparata	0:489965565a0d	139	/**
cparata	0:489965565a0d	140	* @brief Block data update.
cparata	0:489965565a0d	141	*/
cparata	0:489965565a0d	142
cparata	0:489965565a0d	143	typedef enum {
cparata	0:489965565a0d	144	LPS22HB_BDU_CONTINUOUS_UPDATE = (uint8_t)0x00, /!< Data updated continuously /
cparata	0:489965565a0d	145	LPS22HB_BDU_NO_UPDATE = (uint8_t)0x02 /!< Data updated after a read operation /
cparata	0:489965565a0d	146	} LPS22HB_Bdu_et;
cparata	0:489965565a0d	147	#define IS_LPS22HB_BDUMode(MODE) ((MODE == LPS22HB_BDU_CONTINUOUS_UPDATE) \|\| (MODE == LPS22HB_BDU_NO_UPDATE))
cparata	0:489965565a0d	148
cparata	0:489965565a0d	149	/**
cparata	0:489965565a0d	150	* @brief LPS22HB Spi Mode configuration.
cparata	0:489965565a0d	151	*/
cparata	0:489965565a0d	152	typedef enum {
cparata	0:489965565a0d	153	LPS22HB_SPI_4_WIRE = (uint8_t)0x00,
cparata	0:489965565a0d	154	LPS22HB_SPI_3_WIRE = (uint8_t)0x01
cparata	0:489965565a0d	155	} LPS22HB_SPIMode_et;
cparata	0:489965565a0d	156
cparata	0:489965565a0d	157	#define IS_LPS22HB_SPIMode(MODE) ((MODE == LPS22HB_SPI_4_WIRE) \|\| (MODE == LPS22HB_SPI_3_WIRE))
cparata	0:489965565a0d	158
cparata	0:489965565a0d	159
cparata	0:489965565a0d	160	/**
cparata	0:489965565a0d	161	* @brief LPS22HB Interrupt Active Level Configuration (on High or Low)
cparata	0:489965565a0d	162	*/
cparata	0:489965565a0d	163	typedef enum
cparata	0:489965565a0d	164	{
cparata	0:489965565a0d	165	LPS22HB_ActiveHigh = (uint8_t)0x00,
cparata	0:489965565a0d	166	LPS22HB_ActiveLow = (uint8_t)0x80
cparata	0:489965565a0d	167	}LPS22HB_InterruptActiveLevel_et;
cparata	0:489965565a0d	168	#define IS_LPS22HB_InterruptActiveLevel(MODE) ((MODE == LPS22HB_ActiveHigh) \|\| (MODE == LPS22HB_ActiveLow))
cparata	0:489965565a0d	169
cparata	0:489965565a0d	170	/**
cparata	0:489965565a0d	171	* @brief LPS22HB Push-pull/Open Drain selection on Interrupt pads.
cparata	0:489965565a0d	172	*/
cparata	0:489965565a0d	173	typedef enum
cparata	0:489965565a0d	174	{
cparata	0:489965565a0d	175	LPS22HB_PushPull = (uint8_t)0x00,
cparata	0:489965565a0d	176	LPS22HB_OpenDrain = (uint8_t)0x40
cparata	0:489965565a0d	177	}LPS22HB_OutputType_et;
cparata	0:489965565a0d	178	#define IS_LPS22HB_OutputType(MODE) ((MODE == LPS22HB_PushPull) \|\| (MODE == LPS22HB_OpenDrain))
cparata	0:489965565a0d	179
cparata	0:489965565a0d	180
cparata	0:489965565a0d	181	/**
cparata	0:489965565a0d	182	* @brief Data Signal on INT pad control bits.
cparata	0:489965565a0d	183	*/
cparata	0:489965565a0d	184	typedef enum
cparata	0:489965565a0d	185	{
cparata	0:489965565a0d	186	LPS22HB_DATA = (uint8_t)0x00,
cparata	0:489965565a0d	187	LPS22HB_P_HIGH = (uint8_t)0x01,
cparata	0:489965565a0d	188	LPS22HB_P_LOW = (uint8_t)0x02,
cparata	0:489965565a0d	189	LPS22HB_P_LOW_HIGH = (uint8_t)0x03
cparata	0:489965565a0d	190	}LPS22HB_OutputSignalConfig_et;
cparata	0:489965565a0d	191	#define IS_LPS22HB_OutputSignal(MODE) ((MODE == LPS22HB_DATA) \|\| (MODE == LPS22HB_P_HIGH)\|\|\
cparata	0:489965565a0d	192	(MODE == LPS22HB_P_LOW) \|\| (MODE == LPS22HB_P_LOW_HIGH))
cparata	0:489965565a0d	193
cparata	0:489965565a0d	194
cparata	0:489965565a0d	195
cparata	0:489965565a0d	196	/**
cparata	0:489965565a0d	197	* @brief LPS22HB Interrupt Differential Status.
cparata	0:489965565a0d	198	*/
cparata	0:489965565a0d	199
cparata	0:489965565a0d	200	typedef struct
cparata	0:489965565a0d	201	{
cparata	0:489965565a0d	202	uint8_t PH; /!< High Differential Pressure event occured /
cparata	0:489965565a0d	203	uint8_t PL; /!< Low Differential Pressure event occured /
cparata	0:489965565a0d	204	uint8_t IA; /!< One or more interrupt events have been generated.Interrupt Active /
cparata	0:489965565a0d	205	uint8_t BOOT; /!< i '1' indicates that the Boot (Reboot) phase is running /
cparata	0:489965565a0d	206	}LPS22HB_InterruptDiffStatus_st;
cparata	0:489965565a0d	207
cparata	0:489965565a0d	208
cparata	0:489965565a0d	209	/**
cparata	0:489965565a0d	210	* @brief LPS22HB Pressure and Temperature data status.
cparata	0:489965565a0d	211	*/
cparata	0:489965565a0d	212	typedef struct
cparata	0:489965565a0d	213	{
cparata	0:489965565a0d	214	uint8_t TempDataAvailable; /!< Temperature data available bit /
cparata	0:489965565a0d	215	uint8_t PressDataAvailable; /!< Pressure data available bit /
cparata	0:489965565a0d	216	uint8_t TempDataOverrun; /!< Temperature data over-run bit /
cparata	0:489965565a0d	217	uint8_t PressDataOverrun; /!< Pressure data over-run bit /
cparata	0:489965565a0d	218	}LPS22HB_DataStatus_st;
cparata	0:489965565a0d	219
cparata	0:489965565a0d	220
cparata	0:489965565a0d	221	/**
cparata	0:489965565a0d	222	* @brief LPS22HB Clock Tree configuration.
cparata	0:489965565a0d	223	*/
cparata	0:489965565a0d	224	typedef enum {
cparata	0:489965565a0d	225	LPS22HB_CTE_NotBalanced = (uint8_t)0x00,
cparata	0:489965565a0d	226	LPS22HB_CTE_Balanced = (uint8_t)0x20
cparata	0:489965565a0d	227	} LPS22HB_CTE_et;
cparata	0:489965565a0d	228
cparata	0:489965565a0d	229	#define IS_LPS22HB_CTE(MODE) ((MODE == LPS22HB_CTE_NotBalanced) \|\| (MODE == LPS22HB_CTE_Balanced))
cparata	0:489965565a0d	230
cparata	0:489965565a0d	231	/**
cparata	0:489965565a0d	232	* @brief LPS22HB Fifo Mode.
cparata	0:489965565a0d	233	*/
cparata	0:489965565a0d	234
cparata	0:489965565a0d	235	typedef enum {
cparata	0:489965565a0d	236	LPS22HB_FIFO_BYPASS_MODE = (uint8_t)0x00, /!< The FIFO is disabled and empty. The pressure is read directly/
cparata	0:489965565a0d	237	LPS22HB_FIFO_MODE = (uint8_t)0x20, /!< Stops collecting data when full /
cparata	0:489965565a0d	238	LPS22HB_FIFO_STREAM_MODE = (uint8_t)0x40, /!< Keep the newest measurements in the FIFO/
cparata	0:489965565a0d	239	LPS22HB_FIFO_TRIGGER_STREAMTOFIFO_MODE = (uint8_t)0x60, /!< STREAM MODE until trigger deasserted, then change to FIFO MODE/
cparata	0:489965565a0d	240	LPS22HB_FIFO_TRIGGER_BYPASSTOSTREAM_MODE = (uint8_t)0x80, /!< BYPASS MODE until trigger deasserted, then STREAM MODE/
cparata	0:489965565a0d	241	LPS22HB_FIFO_TRIGGER_BYPASSTOFIFO_MODE = (uint8_t)0xE0 /!< BYPASS mode until trigger deasserted, then FIFO MODE/
cparata	0:489965565a0d	242	} LPS22HB_FifoMode_et;
cparata	0:489965565a0d	243
cparata	0:489965565a0d	244	#define IS_LPS22HB_FifoMode(MODE) ((MODE == LPS22HB_FIFO_BYPASS_MODE) \|\| (MODE ==LPS22HB_FIFO_MODE)\|\|\
cparata	0:489965565a0d	245	(MODE == LPS22HB_FIFO_STREAM_MODE) \|\| (MODE == LPS22HB_FIFO_TRIGGER_STREAMTOFIFO_MODE)\|\|\
cparata	0:489965565a0d	246	(MODE == LPS22HB_FIFO_TRIGGER_BYPASSTOSTREAM_MODE) \|\| (MODE == LPS22HB_FIFO_TRIGGER_BYPASSTOFIFO_MODE))
cparata	0:489965565a0d	247
cparata	0:489965565a0d	248
cparata	0:489965565a0d	249	/**
cparata	0:489965565a0d	250	* @brief LPS22HB Fifo Satus.
cparata	0:489965565a0d	251	*/
cparata	0:489965565a0d	252	typedef struct {
cparata	0:489965565a0d	253	uint8_t FIFO_LEVEL; /!< FIFO Stored data level: 00000: FIFO empty; 10000: FIFO is FULL and ha 32 unread samples /
cparata	0:489965565a0d	254	uint8_t FIFO_EMPTY; /!< Empty FIFO Flag .1 FIFO is empty (see FIFO_level) /
cparata	0:489965565a0d	255	uint8_t FIFO_FULL; /!< Full FIFO flag.1 FIFO is Full (see FIFO_level) /
cparata	0:489965565a0d	256	uint8_t FIFO_OVR; /!< Overrun bit status. 1 FIFO is full and at least one sample in the FIFO has been overwritten /
cparata	0:489965565a0d	257	uint8_t FIFO_FTH; /!< FIFO Threshold (Watermark) Status. 1 FIFO filling is equal or higher then FTH (wtm) level./
cparata	0:489965565a0d	258	}LPS22HB_FifoStatus_st;
cparata	0:489965565a0d	259
cparata	0:489965565a0d	260
cparata	0:489965565a0d	261
cparata	0:489965565a0d	262	/**
cparata	0:489965565a0d	263	* @brief LPS22HB Configuration structure definition.
cparata	0:489965565a0d	264	*/
cparata	0:489965565a0d	265	typedef struct
cparata	0:489965565a0d	266	{
cparata	0:489965565a0d	267	LPS22HB_PowerMode_et PowerMode; /!< Enable Low Current Mode (low Power) or Low Noise Mode/
cparata	0:489965565a0d	268	LPS22HB_Odr_et OutputDataRate; /!< Output Data Rate /
cparata	0:489965565a0d	269	LPS22HB_Bdu_et BDU; /!< Enable to inhibit the output registers update between the reading of upper and lower register parts./
cparata	0:489965565a0d	270	LPS22HB_State_et LowPassFilter; /!< Enable/ Disable Low Pass Filter /
cparata	0:489965565a0d	271	LPS22HB_LPF_Cutoff_et LPF_Cutoff; /!< Low Pass Filter Configuration /
cparata	0:489965565a0d	272	LPS22HB_SPIMode_et Sim; /!< SPI Serial Interface Mode selection /
cparata	0:489965565a0d	273	LPS22HB_State_et IfAddInc; /!< Enable/Disable Register address automatically inceremented during a multiple byte access /
cparata	0:489965565a0d	274	}LPS22HB_ConfigTypeDef_st;
cparata	0:489965565a0d	275
cparata	0:489965565a0d	276
cparata	0:489965565a0d	277	/**
cparata	0:489965565a0d	278	* @brief LPS22HB Interrupt structure definition .
cparata	0:489965565a0d	279	*/
cparata	0:489965565a0d	280	typedef struct {
cparata	0:489965565a0d	281	LPS22HB_InterruptActiveLevel_et INT_H_L; /!< Interrupt active high, low. Default value: 0 /
cparata	0:489965565a0d	282	LPS22HB_OutputType_et PP_OD; /!< Push-pull/open drain selection on interrupt pads. Default value: 0 /
cparata	0:489965565a0d	283	LPS22HB_OutputSignalConfig_et OutputSignal_INT; /!< Data signal on INT Pad: Data,Pressure High, Preessure Low,P High or Low/
cparata	0:489965565a0d	284	LPS22HB_State_et DRDY; /!< Enable/Disable Data Ready Interrupt on INT_DRDY Pin/
cparata	0:489965565a0d	285	LPS22HB_State_et FIFO_OVR; /!< Enable/Disable FIFO Overrun Interrupt on INT_DRDY Pin/
cparata	0:489965565a0d	286	LPS22HB_State_et FIFO_FTH; /!< Enable/Disable FIFO threshold (Watermark) interrupt on INT_DRDY pin./
cparata	0:489965565a0d	287	LPS22HB_State_et FIFO_FULL; /!< Enable/Disable FIFO FULL interrupt on INT_DRDY pin./
cparata	0:489965565a0d	288	LPS22HB_State_et LatchIRQ; /!< Latch Interrupt request in to INT_SOURCE reg/
cparata	0:489965565a0d	289	int16_t THS_threshold; /!< Threshold value for pressure interrupt generation/
cparata	0:489965565a0d	290	LPS22HB_State_et AutoRifP; /!< Enable/Disable AutoRifP function /
cparata	0:489965565a0d	291	LPS22HB_State_et AutoZero; /!< Enable/Disable AutoZero function /
cparata	0:489965565a0d	292	}LPS22HB_InterruptTypeDef_st;
cparata	0:489965565a0d	293
cparata	0:489965565a0d	294	/**
cparata	0:489965565a0d	295	* @brief LPS22HB FIFO structure definition.
cparata	0:489965565a0d	296	*/
cparata	0:489965565a0d	297	typedef struct {
cparata	0:489965565a0d	298	LPS22HB_FifoMode_et FIFO_MODE; /!< Fifo Mode Selection /
cparata	0:489965565a0d	299	LPS22HB_State_et WTM_INT; /!< Enable/Disable the watermark interrupt/
cparata	0:489965565a0d	300	uint8_t WTM_LEVEL; /!< FIFO threshold/Watermark level selection/
cparata	0:489965565a0d	301	}LPS22HB_FIFOTypeDef_st;
cparata	0:489965565a0d	302
cparata	0:489965565a0d	303	#define IS_LPS22HB_WtmLevel(LEVEL) ((LEVEL > 0) && (LEVEL <=31))
cparata	0:489965565a0d	304	/**
cparata	0:489965565a0d	305	* @brief LPS22HB Measure Type definition.
cparata	0:489965565a0d	306	*/
cparata	0:489965565a0d	307	typedef struct {
cparata	0:489965565a0d	308	int16_t Tout;
cparata	0:489965565a0d	309	int32_t Pout;
cparata	0:489965565a0d	310	}LPS22HB_MeasureTypeDef_st;
cparata	0:489965565a0d	311
cparata	0:489965565a0d	312
cparata	0:489965565a0d	313	/**
cparata	0:489965565a0d	314	* @brief LPS22HB Driver Version Info structure definition.
cparata	0:489965565a0d	315	*/
cparata	0:489965565a0d	316	typedef struct {
cparata	0:489965565a0d	317	uint8_t Major;
cparata	0:489965565a0d	318	uint8_t Minor;
cparata	0:489965565a0d	319	uint8_t Point;
cparata	0:489965565a0d	320	}LPS22HB_DriverVersion_st;
cparata	0:489965565a0d	321
cparata	0:489965565a0d	322
cparata	0:489965565a0d	323	/**
cparata	0:489965565a0d	324	* @brief Bitfield positioning.
cparata	0:489965565a0d	325	*/
cparata	0:489965565a0d	326	#define LPS22HB_BIT(x) ((uint8_t)x)
cparata	0:489965565a0d	327
cparata	0:489965565a0d	328	/**
cparata	0:489965565a0d	329	* @brief I2C address.
cparata	0:489965565a0d	330	*/
cparata	0:489965565a0d	331	/* SD0/SA0(pin 5) is connected to the voltage supply */
cparata	0:489965565a0d	332	#define LPS22HB_ADDRESS_HIGH 0xBA /*< LPS22HB I2C Address High /
cparata	0:489965565a0d	333	/* SDO/SA0 (pin5) is connected to the GND */
cparata	0:489965565a0d	334	#define LPS22HB_ADDRESS_LOW 0xB8 /*< LPS22HB I2C Address Low /
cparata	0:489965565a0d	335
cparata	0:489965565a0d	336	/**
cparata	0:489965565a0d	337	* @brief Set the LPS22HB driver version.
cparata	0:489965565a0d	338	*/
cparata	0:489965565a0d	339
cparata	0:489965565a0d	340	#define LPS22HB_DriverVersion_Major (uint8_t)1
cparata	0:489965565a0d	341	#define LPS22HB_DriverVersion_Minor (uint8_t)0
cparata	0:489965565a0d	342	#define LPS22HB_DriverVersion_Point (uint8_t)0
cparata	0:489965565a0d	343
cparata	0:489965565a0d	344	/**
cparata	0:489965565a0d	345	* @}
cparata	0:489965565a0d	346	*/
cparata	0:489965565a0d	347
cparata	0:489965565a0d	348
cparata	0:489965565a0d	349	/* Exported Constants ---------------------------------------------------------*/
cparata	0:489965565a0d	350	/** @defgroup LPS22HB_Exported_Constants
cparata	0:489965565a0d	351	* @{
cparata	0:489965565a0d	352	*/
cparata	0:489965565a0d	353
cparata	0:489965565a0d	354
cparata	0:489965565a0d	355	/**
cparata	0:489965565a0d	356	* @addtogroup LPS22HB_Register
cparata	0:489965565a0d	357	* @{
cparata	0:489965565a0d	358	*/
cparata	0:489965565a0d	359
cparata	0:489965565a0d	360
cparata	0:489965565a0d	361
cparata	0:489965565a0d	362	/**
cparata	0:489965565a0d	363	* @brief Device Identification register.
cparata	0:489965565a0d	364	* \code
cparata	0:489965565a0d	365	* Read
cparata	0:489965565a0d	366	* Default value: 0xB1
cparata	0:489965565a0d	367	* 7:0 This read-only register contains the device identifier that, for LPS22HB, is set to B1h.
cparata	0:489965565a0d	368	* \endcode
cparata	0:489965565a0d	369	*/
cparata	0:489965565a0d	370
cparata	0:489965565a0d	371	#define LPS22HB_WHO_AM_I_REG (uint8_t)0x0F
cparata	0:489965565a0d	372
cparata	0:489965565a0d	373	/**
cparata	0:489965565a0d	374	* @brief Device Identification value.
cparata	0:489965565a0d	375	*/
cparata	0:489965565a0d	376	#define LPS22HB_WHO_AM_I_VAL (uint8_t)0xB1
cparata	0:489965565a0d	377
cparata	0:489965565a0d	378
cparata	0:489965565a0d	379	/**
cparata	0:489965565a0d	380	* @brief Reference Pressure Register(LSB data)
cparata	0:489965565a0d	381	* \code
cparata	0:489965565a0d	382	* Read/write
cparata	0:489965565a0d	383	* Default value: 0x00
cparata	0:489965565a0d	384	* 7:0 REFL7-0: Lower part of the reference pressure value that
cparata	0:489965565a0d	385	* is sum to the sensor output pressure.
cparata	0:489965565a0d	386	* \endcode
cparata	0:489965565a0d	387	*/
cparata	0:489965565a0d	388	#define LPS22HB_REF_P_XL_REG (uint8_t)0x15
cparata	0:489965565a0d	389
cparata	0:489965565a0d	390
cparata	0:489965565a0d	391	/**
cparata	0:489965565a0d	392	* @brief Reference Pressure Register (Middle data)
cparata	0:489965565a0d	393	* \code
cparata	0:489965565a0d	394	* Read/write
cparata	0:489965565a0d	395	* Default value: 0x00
cparata	0:489965565a0d	396	* 7:0 REFL15-8: Middle part of the reference pressure value that
cparata	0:489965565a0d	397	* is sum to the sensor output pressure.
cparata	0:489965565a0d	398	* \endcode
cparata	0:489965565a0d	399	*/
cparata	0:489965565a0d	400	#define LPS22HB_REF_P_L_REG (uint8_t)0x16
cparata	0:489965565a0d	401
cparata	0:489965565a0d	402	/**
cparata	0:489965565a0d	403	* @brief Reference Pressure Register (MSB data)
cparata	0:489965565a0d	404	* \code
cparata	0:489965565a0d	405	* Read/write
cparata	0:489965565a0d	406	* Default value: 0x00
cparata	0:489965565a0d	407	* 7:0 REFL23-16 Higest part of the reference pressure value that
cparata	0:489965565a0d	408	* is sum to the sensor output pressure.
cparata	0:489965565a0d	409	* \endcode
cparata	0:489965565a0d	410	*/
cparata	0:489965565a0d	411	#define LPS22HB_REF_P_H_REG (uint8_t)0x17
cparata	0:489965565a0d	412
cparata	0:489965565a0d	413
cparata	0:489965565a0d	414	/**
cparata	0:489965565a0d	415	* @brief Pressure and temperature resolution mode Register
cparata	0:489965565a0d	416	* \code
cparata	0:489965565a0d	417	* Read/write
cparata	0:489965565a0d	418	* Default value: 0x05
cparata	0:489965565a0d	419	* 7:2 These bits must be set to 0 for proper operation of the device
cparata	0:489965565a0d	420	* 1: Reserved
cparata	0:489965565a0d	421	* 0 LC_EN: Low Current Mode Enable. Default 0
cparata	0:489965565a0d	422	* \endcode
cparata	0:489965565a0d	423	*/
cparata	0:489965565a0d	424	#define LPS22HB_RES_CONF_REG (uint8_t)0x1A
cparata	0:489965565a0d	425
cparata	0:489965565a0d	426	#define LPS22HB_LCEN_MASK (uint8_t)0x01
cparata	0:489965565a0d	427
cparata	0:489965565a0d	428	/**
cparata	0:489965565a0d	429	* @brief Control Register 1
cparata	0:489965565a0d	430	* \code
cparata	0:489965565a0d	431	* Read/write
cparata	0:489965565a0d	432	* Default value: 0x00
cparata	0:489965565a0d	433	* 7: This bit must be set to 0 for proper operation of the device
cparata	0:489965565a0d	434	* 6:4 ODR2, ODR1, ODR0: output data rate selection.Default 000
cparata	0:489965565a0d	435	* ODR2 \| ODR1 \| ODR0 \| Pressure output data-rate(Hz) \| Pressure output data-rate(Hz)
cparata	0:489965565a0d	436	* ----------------------------------------------------------------------------------
cparata	0:489965565a0d	437	* 0 \| 0 \| 0 \| one shot \| one shot
cparata	0:489965565a0d	438	* 0 \| 0 \| 1 \| 1 \| 1
cparata	0:489965565a0d	439	* 0 \| 1 \| 0 \| 10 \| 10
cparata	0:489965565a0d	440	* 0 \| 1 \| 1 \| 25 \| 25
cparata	0:489965565a0d	441	* 1 \| 0 \| 0 \| 50 \| 50
cparata	0:489965565a0d	442	* 1 \| 0 \| 1 \| 75 \| 75
cparata	0:489965565a0d	443	* 1 \| 1 \| 0 \| Reserved \| Reserved
cparata	0:489965565a0d	444	* 1 \| 1 \| 1 \| Reserved \| Reserved
cparata	0:489965565a0d	445	*
cparata	0:489965565a0d	446	* 3 EN_LPFP: Enable Low Pass filter on Pressure data. Default value:0
cparata	0:489965565a0d	447	* 2:LPF_CFG Low-pass configuration register. (0: Filter cutoff is ODR/9; 1: filter cutoff is ODR/20)
cparata	0:489965565a0d	448	* 1 BDU: block data update. 0 - continuous update; 1 - output registers not updated until MSB and LSB reading.
cparata	0:489965565a0d	449	* 0 SIM: SPI Serial Interface Mode selection. 0 - SPI 4-wire; 1 - SPI 3-wire
cparata	0:489965565a0d	450	* \endcode
cparata	0:489965565a0d	451	*/
cparata	0:489965565a0d	452	#define LPS22HB_CTRL_REG1 (uint8_t)0x10
cparata	0:489965565a0d	453
cparata	0:489965565a0d	454	#define LPS22HB_ODR_MASK (uint8_t)0x70
cparata	0:489965565a0d	455	#define LPS22HB_LPFP_MASK (uint8_t)0x08
cparata	0:489965565a0d	456	#define LPS22HB_LPFP_CUTOFF_MASK (uint8_t)0x04
cparata	0:489965565a0d	457	#define LPS22HB_BDU_MASK (uint8_t)0x02
cparata	0:489965565a0d	458	#define LPS22HB_SIM_MASK (uint8_t)0x01
cparata	0:489965565a0d	459
cparata	0:489965565a0d	460	#define LPS22HB_LPFP_BIT LPS22HB_BIT(3)
cparata	0:489965565a0d	461
cparata	0:489965565a0d	462
cparata	0:489965565a0d	463	/**
cparata	0:489965565a0d	464	* @brief Control Register 2
cparata	0:489965565a0d	465	* \code
cparata	0:489965565a0d	466	* Read/write
cparata	0:489965565a0d	467	* Default value: 0x10
cparata	0:489965565a0d	468	* 7 BOOT: Reboot memory content. 0: normal mode; 1: reboot memory content. Self-clearing upon completation
cparata	0:489965565a0d	469	* 6 FIFO_EN: FIFO Enable. 0: disable; 1: enable
cparata	0:489965565a0d	470	* 5 STOP_ON_FTH: Stop on FIFO Threshold FIFO Watermark level use. 0: disable; 1: enable
cparata	0:489965565a0d	471	* 4 IF_ADD_INC: Register address automatically incrementeed during a multiple byte access with a serial interface (I2C or SPI). Default value 1.( 0: disable; 1: enable)
cparata	0:489965565a0d	472	* 3 I2C DIS: Disable I2C interface 0: I2C Enabled; 1: I2C disabled
cparata	0:489965565a0d	473	* 2 SWRESET: Software reset. 0: normal mode; 1: SW reset. Self-clearing upon completation
cparata	0:489965565a0d	474	* 1 AUTO_ZERO: Autozero enable. 0: normal mode; 1: autozero enable.
cparata	0:489965565a0d	475	* 0 ONE_SHOT: One shot enable. 0: waiting for start of conversion; 1: start for a new dataset
cparata	0:489965565a0d	476	* \endcode
cparata	0:489965565a0d	477	*/
cparata	0:489965565a0d	478	#define LPS22HB_CTRL_REG2 (uint8_t)0x11
cparata	0:489965565a0d	479
cparata	0:489965565a0d	480	#define LPS22HB_BOOT_BIT LPS22HB_BIT(7)
cparata	0:489965565a0d	481	#define LPS22HB_FIFO_EN_BIT LPS22HB_BIT(6)
cparata	0:489965565a0d	482	#define LPS22HB_WTM_EN_BIT LPS22HB_BIT(5)
cparata	0:489965565a0d	483	#define LPS22HB_ADD_INC_BIT LPS22HB_BIT(4)
cparata	0:489965565a0d	484	#define LPS22HB_I2C_BIT LPS22HB_BIT(3)
cparata	0:489965565a0d	485	#define LPS22HB_SW_RESET_BIT LPS22HB_BIT(2)
cparata	0:489965565a0d	486
cparata	0:489965565a0d	487	#define LPS22HB_FIFO_EN_MASK (uint8_t)0x40
cparata	0:489965565a0d	488	#define LPS22HB_WTM_EN_MASK (uint8_t)0x20
cparata	0:489965565a0d	489	#define LPS22HB_ADD_INC_MASK (uint8_t)0x10
cparata	0:489965565a0d	490	#define LPS22HB_I2C_MASK (uint8_t)0x08
cparata	0:489965565a0d	491	#define LPS22HB_ONE_SHOT_MASK (uint8_t)0x01
cparata	0:489965565a0d	492
cparata	0:489965565a0d	493
cparata	0:489965565a0d	494	/**
cparata	0:489965565a0d	495	* @brief CTRL Reg3 Interrupt Control Register
cparata	0:489965565a0d	496	* \code
cparata	0:489965565a0d	497	* Read/write
cparata	0:489965565a0d	498	* Default value: 0x00
cparata	0:489965565a0d	499	* 7 INT_H_L: Interrupt active high, low. 0:active high; 1: active low.
cparata	0:489965565a0d	500	* 6 PP_OD: Push-Pull/OpenDrain selection on interrupt pads. 0: Push-pull; 1: open drain.
cparata	0:489965565a0d	501	* 5 F_FSS5: FIFO full flag on INT_DRDY pin. Defaul value: 0. (0: Diasable; 1 : Enable).
cparata	0:489965565a0d	502	* 4 F_FTH: FIFO threshold (watermark) status on INT_DRDY pin. Defaul value: 0. (0: Diasable; 1 : Enable).
cparata	0:489965565a0d	503	* 3 F_OVR: FIFO overrun interrupt on INT_DRDY pin. Defaul value: 0. (0: Diasable; 1 : Enable).
cparata	0:489965565a0d	504	* 2 DRDY: Data-ready signal on INT_DRDY pin. Defaul value: 0. (0: Diasable; 1 : Enable).
cparata	0:489965565a0d	505	* 1:0 INT_S2, INT_S1: data signal on INT pad control bits.
cparata	0:489965565a0d	506	* INT_S2 \| INT_S1 \| INT pin
cparata	0:489965565a0d	507	* ------------------------------------------------------
cparata	0:489965565a0d	508	* 0 \| 0 \| Data signal( in order of priority:PTH_DRDY or F_FTH or F_OVR_or F_FSS5
cparata	0:489965565a0d	509	* 0 \| 1 \| Pressure high (P_high)
cparata	0:489965565a0d	510	* 1 \| 0 \| Pressure low (P_low)
cparata	0:489965565a0d	511	* 1 \| 1 \| P_low OR P_high
cparata	0:489965565a0d	512	* \endcode
cparata	0:489965565a0d	513	*/
cparata	0:489965565a0d	514	#define LPS22HB_CTRL_REG3 (uint8_t)0x12
cparata	0:489965565a0d	515
cparata	0:489965565a0d	516	#define LPS22HB_PP_OD_BIT LPS22HB_BIT(6)
cparata	0:489965565a0d	517	#define LPS22HB_FIFO_FULL_BIT LPS22HB_BIT(5)
cparata	0:489965565a0d	518	#define LPS22HB_FIFO_FTH_BIT LPS22HB_BIT(4)
cparata	0:489965565a0d	519	#define LPS22HB_FIFO_OVR_BIT LPS22HB_BIT(3)
cparata	0:489965565a0d	520	#define LPS22HB_DRDY_BIT LPS22HB_BIT(2)
cparata	0:489965565a0d	521
cparata	0:489965565a0d	522
cparata	0:489965565a0d	523	#define LPS22HB_INT_H_L_MASK (uint8_t)0x80
cparata	0:489965565a0d	524	#define LPS22HB_PP_OD_MASK (uint8_t)0x40
cparata	0:489965565a0d	525	#define LPS22HB_FIFO_FULL_MASK (uint8_t)0x20
cparata	0:489965565a0d	526	#define LPS22HB_FIFO_FTH_MASK (uint8_t)0x10
cparata	0:489965565a0d	527	#define LPS22HB_FIFO_OVR_MASK (uint8_t)0x08
cparata	0:489965565a0d	528	#define LPS22HB_DRDY_MASK (uint8_t)0x04
cparata	0:489965565a0d	529	#define LPS22HB_INT_S12_MASK (uint8_t)0x03
cparata	0:489965565a0d	530
cparata	0:489965565a0d	531
cparata	0:489965565a0d	532	/**
cparata	0:489965565a0d	533	* @brief Interrupt Differential configuration Register
cparata	0:489965565a0d	534	* \code
cparata	0:489965565a0d	535	* Read/write
cparata	0:489965565a0d	536	* Default value: 0x00.
cparata	0:489965565a0d	537	* 7 AUTORIFP: AutoRifP Enable ??
cparata	0:489965565a0d	538	* 6 RESET_ARP: Reset AutoRifP function
cparata	0:489965565a0d	539	* 4 AUTOZERO: Autozero enabled
cparata	0:489965565a0d	540	* 5 RESET_AZ: Reset Autozero Function
cparata	0:489965565a0d	541	* 3 DIFF_EN: Interrupt generation enable
cparata	0:489965565a0d	542	* 2 LIR: Latch Interrupt request into INT_SOURCE register. 0 - interrupt request not latched; 1 - interrupt request latched
cparata	0:489965565a0d	543	* 1 PL_E: Enable interrupt generation on differential pressure low event. 0 - disable; 1 - enable
cparata	0:489965565a0d	544	* 0 PH_E: Enable interrupt generation on differential pressure high event. 0 - disable; 1 - enable
cparata	0:489965565a0d	545	* \endcode
cparata	0:489965565a0d	546	*/
cparata	0:489965565a0d	547	#define LPS22HB_INTERRUPT_CFG_REG (uint8_t)0x0B
cparata	0:489965565a0d	548
cparata	0:489965565a0d	549	#define LPS22HB_DIFF_EN_BIT LPS22HB_BIT(3)
cparata	0:489965565a0d	550	#define LPS22HB_LIR_BIT LPS22HB_BIT(2)
cparata	0:489965565a0d	551	#define LPS22HB_PLE_BIT LPS22HB_BIT(1)
cparata	0:489965565a0d	552	#define LPS22HB_PHE_BIT LPS22HB_BIT(0)
cparata	0:489965565a0d	553
cparata	0:489965565a0d	554	#define LPS22HB_AUTORIFP_MASK (uint8_t)0x80
cparata	0:489965565a0d	555	#define LPS22HB_RESET_ARP_MASK (uint8_t)0x40
cparata	0:489965565a0d	556	#define LPS22HB_AUTOZERO_MASK (uint8_t)0x20
cparata	0:489965565a0d	557	#define LPS22HB_RESET_AZ_MASK (uint8_t)0x10
cparata	0:489965565a0d	558	#define LPS22HB_DIFF_EN_MASK (uint8_t)0x08
cparata	0:489965565a0d	559	#define LPS22HB_LIR_MASK (uint8_t)0x04
cparata	0:489965565a0d	560	#define LPS22HB_PLE_MASK (uint8_t)0x02
cparata	0:489965565a0d	561	#define LPS22HB_PHE_MASK (uint8_t)0x01
cparata	0:489965565a0d	562
cparata	0:489965565a0d	563
cparata	0:489965565a0d	564
cparata	0:489965565a0d	565	/**
cparata	0:489965565a0d	566	* @brief Interrupt source Register (It is cleared by reading it)
cparata	0:489965565a0d	567	* \code
cparata	0:489965565a0d	568	* Read
cparata	0:489965565a0d	569	* Default value: ----.
cparata	0:489965565a0d	570	* 7 BOOT_STATUS: If 1 indicates that the Boot (Reboot) phase is running.
cparata	0:489965565a0d	571	* 6:3 Reserved: Keep these bits at 0
cparata	0:489965565a0d	572	* 2 IA: Interrupt Active.0: no interrupt has been generated; 1: one or more interrupt events have been generated.
cparata	0:489965565a0d	573	* 1 PL: Differential pressure Low. 0: no interrupt has been generated; 1: Low differential pressure event has occurred.
cparata	0:489965565a0d	574	* 0 PH: Differential pressure High. 0: no interrupt has been generated; 1: High differential pressure event has occurred.
cparata	0:489965565a0d	575	* \endcode
cparata	0:489965565a0d	576	*/
cparata	0:489965565a0d	577	#define LPS22HB_INTERRUPT_SOURCE_REG (uint8_t)0x25
cparata	0:489965565a0d	578
cparata	0:489965565a0d	579	#define LPS22HB_BOOT_STATUS_BIT LPS22HB_BIT(7)
cparata	0:489965565a0d	580	#define LPS22HB_IA_BIT LPS22HB_BIT(2)
cparata	0:489965565a0d	581	#define LPS22HB_PL_BIT LPS22HB_BIT(1)
cparata	0:489965565a0d	582	#define LPS22HB_PH_BIT LPS22HB_BIT(0)
cparata	0:489965565a0d	583
cparata	0:489965565a0d	584	#define LPS22HB_BOOT_STATUS_MASK (uint8_t)0x80
cparata	0:489965565a0d	585	#define LPS22HB_IA_MASK (uint8_t)0x04
cparata	0:489965565a0d	586	#define LPS22HB_PL_MASK (uint8_t)0x02
cparata	0:489965565a0d	587	#define LPS22HB_PH_MASK (uint8_t)0x01
cparata	0:489965565a0d	588
cparata	0:489965565a0d	589
cparata	0:489965565a0d	590	/**
cparata	0:489965565a0d	591	* @brief Status Register
cparata	0:489965565a0d	592	* \code
cparata	0:489965565a0d	593	* Read
cparata	0:489965565a0d	594	* Default value: ---
cparata	0:489965565a0d	595	* 7:6 Reserved: 0
cparata	0:489965565a0d	596	* 5 T_OR: Temperature data overrun. 0: no overrun has occurred; 1: a new data for temperature has overwritten the previous one.
cparata	0:489965565a0d	597	* 4 P_OR: Pressure data overrun. 0: no overrun has occurred; 1: new data for pressure has overwritten the previous one.
cparata	0:489965565a0d	598	* 3:2 Reserved: 0
cparata	0:489965565a0d	599	* 1 T_DA: Temperature data available. 0: new data for temperature is not yet available; 1: new data for temperature is available.
cparata	0:489965565a0d	600	* 0 P_DA: Pressure data available. 0: new data for pressure is not yet available; 1: new data for pressure is available.
cparata	0:489965565a0d	601	* \endcode
cparata	0:489965565a0d	602	*/
cparata	0:489965565a0d	603	#define LPS22HB_STATUS_REG (uint8_t)0x27
cparata	0:489965565a0d	604
cparata	0:489965565a0d	605	#define LPS22HB_TOR_BIT LPS22HB_BIT(5)
cparata	0:489965565a0d	606	#define LPS22HB_POR_BIT LPS22HB_BIT(4)
cparata	0:489965565a0d	607	#define LPS22HB_TDA_BIT LPS22HB_BIT(1)
cparata	0:489965565a0d	608	#define LPS22HB_PDA_BIT LPS22HB_BIT(0)
cparata	0:489965565a0d	609
cparata	0:489965565a0d	610	#define LPS22HB_TOR_MASK (uint8_t)0x20
cparata	0:489965565a0d	611	#define LPS22HB_POR_MASK (uint8_t)0x10
cparata	0:489965565a0d	612	#define LPS22HB_TDA_MASK (uint8_t)0x02
cparata	0:489965565a0d	613	#define LPS22HB_PDA_MASK (uint8_t)0x01
cparata	0:489965565a0d	614
cparata	0:489965565a0d	615
cparata	0:489965565a0d	616
cparata	0:489965565a0d	617	/**
cparata	0:489965565a0d	618	* @brief Pressure data (LSB) register.
cparata	0:489965565a0d	619	* \code
cparata	0:489965565a0d	620	* Read
cparata	0:489965565a0d	621	* Default value: 0x00.(To be verified)
cparata	0:489965565a0d	622	* POUT7 - POUT0: Pressure data LSB (2's complement).
cparata	0:489965565a0d	623	* Pressure output data: Pout(hPA)=(PRESS_OUT_H & PRESS_OUT_L &
cparata	0:489965565a0d	624	* PRESS_OUT_XL)[dec]/4096.
cparata	0:489965565a0d	625	* \endcode
cparata	0:489965565a0d	626	*/
cparata	0:489965565a0d	627
cparata	0:489965565a0d	628	#define LPS22HB_PRESS_OUT_XL_REG (uint8_t)0x28
cparata	0:489965565a0d	629	/**
cparata	0:489965565a0d	630	* @brief Pressure data (Middle part) register.
cparata	0:489965565a0d	631	* \code
cparata	0:489965565a0d	632	* Read
cparata	0:489965565a0d	633	* Default value: 0x80.
cparata	0:489965565a0d	634	* POUT15 - POUT8: Pressure data middle part (2's complement).
cparata	0:489965565a0d	635	* Pressure output data: Pout(hPA)=(PRESS_OUT_H & PRESS_OUT_L &
cparata	0:489965565a0d	636	* PRESS_OUT_XL)[dec]/4096.
cparata	0:489965565a0d	637	* \endcode
cparata	0:489965565a0d	638	*/
cparata	0:489965565a0d	639	#define LPS22HB_PRESS_OUT_L_REG (uint8_t)0x29
cparata	0:489965565a0d	640
cparata	0:489965565a0d	641	/**
cparata	0:489965565a0d	642	* @brief Pressure data (MSB) register.
cparata	0:489965565a0d	643	* \code
cparata	0:489965565a0d	644	* Read
cparata	0:489965565a0d	645	* Default value: 0x2F.
cparata	0:489965565a0d	646	* POUT23 - POUT16: Pressure data MSB (2's complement).
cparata	0:489965565a0d	647	* Pressure output data: Pout(hPA)=(PRESS_OUT_H & PRESS_OUT_L &
cparata	0:489965565a0d	648	* PRESS_OUT_XL)[dec]/4096.
cparata	0:489965565a0d	649	* \endcode
cparata	0:489965565a0d	650	*/
cparata	0:489965565a0d	651	#define LPS22HB_PRESS_OUT_H_REG (uint8_t)0x2A
cparata	0:489965565a0d	652
cparata	0:489965565a0d	653	/**
cparata	0:489965565a0d	654	* @brief Temperature data (LSB) register.
cparata	0:489965565a0d	655	* \code
cparata	0:489965565a0d	656	* Read
cparata	0:489965565a0d	657	* Default value: 0x00.
cparata	0:489965565a0d	658	* TOUT7 - TOUT0: temperature data LSB.
cparata	0:489965565a0d	659	* Tout(degC)=TEMP_OUT/100
cparata	0:489965565a0d	660	* \endcode
cparata	0:489965565a0d	661	*/
cparata	0:489965565a0d	662	#define LPS22HB_TEMP_OUT_L_REG (uint8_t)0x2B
cparata	0:489965565a0d	663
cparata	0:489965565a0d	664	/**
cparata	0:489965565a0d	665	* @brief Temperature data (MSB) register.
cparata	0:489965565a0d	666	* \code
cparata	0:489965565a0d	667	* Read
cparata	0:489965565a0d	668	* Default value: 0x00.
cparata	0:489965565a0d	669	* TOUT15 - TOUT8: temperature data MSB.
cparata	0:489965565a0d	670	* Tout(degC)=TEMP_OUT/100
cparata	0:489965565a0d	671	* \endcode
cparata	0:489965565a0d	672	*/
cparata	0:489965565a0d	673	#define LPS22HBH_TEMP_OUT_H_REG (uint8_t)0x2C
cparata	0:489965565a0d	674
cparata	0:489965565a0d	675	/**
cparata	0:489965565a0d	676	* @brief Threshold pressure (LSB) register.
cparata	0:489965565a0d	677	* \code
cparata	0:489965565a0d	678	* Read/write
cparata	0:489965565a0d	679	* Default value: 0x00.
cparata	0:489965565a0d	680	* 7:0 THS7-THS0: LSB Threshold pressure Low part of threshold value for pressure interrupt
cparata	0:489965565a0d	681	* generation. The complete threshold value is given by THS_P_H & THS_P_L and is
cparata	0:489965565a0d	682	* expressed as unsigned number. P_ths(hPA)=(THS_P_H & THS_P_L)[dec]/16.
cparata	0:489965565a0d	683	* \endcode
cparata	0:489965565a0d	684	*/
cparata	0:489965565a0d	685	#define LPS22HB_THS_P_LOW_REG (uint8_t)0x0C
cparata	0:489965565a0d	686
cparata	0:489965565a0d	687	/**
cparata	0:489965565a0d	688	* @brief Threshold pressure (MSB)
cparata	0:489965565a0d	689	* \code
cparata	0:489965565a0d	690	* Read/write
cparata	0:489965565a0d	691	* Default value: 0x00.
cparata	0:489965565a0d	692	* 7:0 THS15-THS8: MSB Threshold pressure. High part of threshold value for pressure interrupt
cparata	0:489965565a0d	693	* generation. The complete threshold value is given by THS_P_H & THS_P_L and is
cparata	0:489965565a0d	694	* expressed as unsigned number. P_ths(mbar)=(THS_P_H & THS_P_L)[dec]/16.
cparata	0:489965565a0d	695	* \endcode
cparata	0:489965565a0d	696	*/
cparata	0:489965565a0d	697	#define LPS22HB_THS_P_HIGH_REG (uint8_t)0x0D
cparata	0:489965565a0d	698
cparata	0:489965565a0d	699	/**
cparata	0:489965565a0d	700	* @brief FIFO control register
cparata	0:489965565a0d	701	* \code
cparata	0:489965565a0d	702	* Read/write
cparata	0:489965565a0d	703	* Default value: 0x00
cparata	0:489965565a0d	704	* 7:5 F_MODE2, F_MODE1, F_MODE0: FIFO mode selection.
cparata	0:489965565a0d	705	* FM2 \| FM1 \| FM0 \| FIFO MODE
cparata	0:489965565a0d	706	* ---------------------------------------------------
cparata	0:489965565a0d	707	* 0 \| 0 \| 0 \| BYPASS MODE
cparata	0:489965565a0d	708	* 0 \| 0 \| 1 \| FIFO MODE. Stops collecting data when full
cparata	0:489965565a0d	709	* 0 \| 1 \| 0 \| STREAM MODE: Keep the newest measurements in the FIFO
cparata	0:489965565a0d	710	* 0 \| 1 \| 1 \| STREAM MODE until trigger deasserted, then change to FIFO MODE
cparata	0:489965565a0d	711	* 1 \| 0 \| 0 \| BYPASS MODE until trigger deasserted, then STREAM MODE
cparata	0:489965565a0d	712	* 1 \| 0 \| 1 \| Reserved for future use
cparata	0:489965565a0d	713	* 1 \| 1 \| 0 \| Reserved
cparata	0:489965565a0d	714	* 1 \| 1 \| 1 \| BYPASS mode until trigger deasserted, then FIFO MODE
cparata	0:489965565a0d	715	*
cparata	0:489965565a0d	716	* 4:0 WTM_POINT4-0 : FIFO Watermark level selection (0-31)
cparata	0:489965565a0d	717	*/
cparata	0:489965565a0d	718	#define LPS22HB_CTRL_FIFO_REG (uint8_t)0x14
cparata	0:489965565a0d	719
cparata	0:489965565a0d	720	#define LPS22HB_FIFO_MODE_MASK (uint8_t)0xE0
cparata	0:489965565a0d	721	#define LPS22HB_WTM_POINT_MASK (uint8_t)0x1F
cparata	0:489965565a0d	722
cparata	0:489965565a0d	723
cparata	0:489965565a0d	724	/**
cparata	0:489965565a0d	725	* @brief FIFO Status register
cparata	0:489965565a0d	726	* \code
cparata	0:489965565a0d	727	* Read
cparata	0:489965565a0d	728	* Default value: ----
cparata	0:489965565a0d	729	* 7 FTH_FIFO: FIFO threshold status. 0:FIFO filling is lower than FTH level; 1: FIFO is equal or higher than FTH level.
cparata	0:489965565a0d	730	* 6 OVR: Overrun bit status. 0 - FIFO not full; 1 -FIFO is full and at least one sample in the FIFO has been overwritten.
cparata	0:489965565a0d	731	* 5:0 FSS: FIFO Stored data level. 000000: FIFO empty, 100000: FIFO is full and has 32 unread samples.
cparata	0:489965565a0d	732	* \endcode
cparata	0:489965565a0d	733	*/
cparata	0:489965565a0d	734	#define LPS22HB_STATUS_FIFO_REG (uint8_t)0x26
cparata	0:489965565a0d	735
cparata	0:489965565a0d	736	#define LPS22HB_FTH_FIFO_BIT LPS22HB_BIT(7)
cparata	0:489965565a0d	737	#define LPS22HB_OVR_FIFO_BIT LPS22HB_BIT(6)
cparata	0:489965565a0d	738
cparata	0:489965565a0d	739	#define LPS22HB_FTH_FIFO_MASK (uint8_t)0x80
cparata	0:489965565a0d	740	#define LPS22HB_OVR_FIFO_MASK (uint8_t)0x40
cparata	0:489965565a0d	741	#define LPS22HB_LEVEL_FIFO_MASK (uint8_t)0x3F
cparata	0:489965565a0d	742	#define LPS22HB_FIFO_EMPTY (uint8_t)0x00
cparata	0:489965565a0d	743	#define LPS22HB_FIFO_FULL (uint8_t)0x20
cparata	0:489965565a0d	744
cparata	0:489965565a0d	745
cparata	0:489965565a0d	746
cparata	0:489965565a0d	747	/**
cparata	0:489965565a0d	748	* @brief Pressure offset register (LSB)
cparata	0:489965565a0d	749	* \code
cparata	0:489965565a0d	750	* Read/write
cparata	0:489965565a0d	751	* Default value: 0x00
cparata	0:489965565a0d	752	* 7:0 RPDS7-0:Pressure Offset for 1 point calibration (OPC) after soldering.
cparata	0:489965565a0d	753	* This register contains the low part of the pressure offset value after soldering,for
cparata	0:489965565a0d	754	* differential pressure computing. The complete value is given by RPDS_L & RPDS_H
cparata	0:489965565a0d	755	* and is expressed as signed 2 complement value.
cparata	0:489965565a0d	756	* \endcode
cparata	0:489965565a0d	757	*/
cparata	0:489965565a0d	758	#define LPS22HB_RPDS_L_REG (uint8_t)0x18
cparata	0:489965565a0d	759
cparata	0:489965565a0d	760	/**
cparata	0:489965565a0d	761	* @brief Pressure offset register (MSB)
cparata	0:489965565a0d	762	* \code
cparata	0:489965565a0d	763	* Read/write
cparata	0:489965565a0d	764	* Default value: 0x00
cparata	0:489965565a0d	765	* 7:0 RPDS15-8:Pressure Offset for 1 point calibration (OPC) after soldering.
cparata	0:489965565a0d	766	* This register contains the high part of the pressure offset value after soldering (see description RPDS_L)
cparata	0:489965565a0d	767	* \endcode
cparata	0:489965565a0d	768	*/
cparata	0:489965565a0d	769	#define LPS22HB_RPDS_H_REG (uint8_t)0x19
cparata	0:489965565a0d	770
cparata	0:489965565a0d	771
cparata	0:489965565a0d	772	/**
cparata	0:489965565a0d	773	* @brief Clock Tree Configuration register
cparata	0:489965565a0d	774	* \code
cparata	0:489965565a0d	775	* Read/write
cparata	0:489965565a0d	776	* Default value: 0x00
cparata	0:489965565a0d	777	* 7:6 Reserved.
cparata	0:489965565a0d	778	* 5: CTE: Clock Tree Enhancement
cparata	0:489965565a0d	779	* \endcode
cparata	0:489965565a0d	780	*/
cparata	0:489965565a0d	781
cparata	0:489965565a0d	782	#define LPS22HB_CLOCK_TREE_CONFIGURATION (uint8_t)0x43
cparata	0:489965565a0d	783
cparata	0:489965565a0d	784	#define LPS22HB_CTE_MASK (uint8_t)0x20
cparata	0:489965565a0d	785
cparata	0:489965565a0d	786	/**
cparata	0:489965565a0d	787	* @}
cparata	0:489965565a0d	788	*/
cparata	0:489965565a0d	789
cparata	0:489965565a0d	790
cparata	0:489965565a0d	791	/**
cparata	0:489965565a0d	792	* @}
cparata	0:489965565a0d	793	*/
cparata	0:489965565a0d	794
cparata	0:489965565a0d	795
cparata	0:489965565a0d	796	/* Exported Functions -------------------------------------------------------------*/
cparata	0:489965565a0d	797	/** @defgroup LPS22HB_Exported_Functions
cparata	0:489965565a0d	798	* @{
cparata	0:489965565a0d	799	*/
cparata	0:489965565a0d	800
cparata	0:489965565a0d	801	LPS22HB_Error_et LPS22HB_ReadReg( void handle, uint8_t RegAddr, uint16_t NumByteToRead, uint8_t Data );
cparata	0:489965565a0d	802	LPS22HB_Error_et LPS22HB_WriteReg( void handle, uint8_t RegAddr, uint16_t NumByteToWrite, uint8_t Data );
cparata	0:489965565a0d	803
cparata	0:489965565a0d	804	/**
cparata	0:489965565a0d	805	* @brief Init the HAL layer.
cparata	0:489965565a0d	806	* @param None
cparata	0:489965565a0d	807	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	808	*/
cparata	0:489965565a0d	809	#define LPS22HB_HalInit (LPS22HB_Error_et)HAL_Init_I2C
cparata	0:489965565a0d	810
cparata	0:489965565a0d	811	/**
cparata	0:489965565a0d	812	* @brief DeInit the HAL layer.
cparata	0:489965565a0d	813	* @param None
cparata	0:489965565a0d	814	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	815	*/
cparata	0:489965565a0d	816	#define LPS22HB_HalDeInit (LPS22HB_Error_et)HAL_DeInit_I2C
cparata	0:489965565a0d	817
cparata	0:489965565a0d	818
cparata	0:489965565a0d	819	/**
cparata	0:489965565a0d	820	* @brief Get the LPS22HB driver version.
cparata	0:489965565a0d	821	* @param None
cparata	0:489965565a0d	822	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	823	*/
cparata	0:489965565a0d	824	LPS22HB_Error_et LPS22HB_Get_DriverVersion(LPS22HB_DriverVersion_st *Version);
cparata	0:489965565a0d	825
cparata	0:489965565a0d	826	/**
cparata	0:489965565a0d	827	* @brief Initialization function for LPS22HB.
cparata	0:489965565a0d	828	* This function make a memory boot.
cparata	0:489965565a0d	829	* Init the sensor with a standard basic confifuration.
cparata	0:489965565a0d	830	* Low Power, ODR 25 Hz, Low Pass Filter disabled; BDU enabled; I2C enabled;
cparata	0:489965565a0d	831	* NO FIFO; NO Interrupt Enabled.
cparata	0:489965565a0d	832	* @param None.
cparata	0:489965565a0d	833	* @retval Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	834	*/
cparata	0:489965565a0d	835	LPS22HB_Error_et LPS22HB_Init(void *handle);
cparata	0:489965565a0d	836
cparata	0:489965565a0d	837	/**
cparata	0:489965565a0d	838	* @brief DeInit the LPS2Hb driver.
cparata	0:489965565a0d	839	* @param None
cparata	0:489965565a0d	840	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	841	*/
cparata	0:489965565a0d	842
cparata	0:489965565a0d	843	LPS22HB_Error_et LPS22HB_DeInit(void *handle);
cparata	0:489965565a0d	844
cparata	0:489965565a0d	845
cparata	0:489965565a0d	846	/**
cparata	0:489965565a0d	847	* @brief Read identification code by WHO_AM_I register
cparata	0:489965565a0d	848	* @param Buffer to empty by Device identification Value.
cparata	0:489965565a0d	849	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	850	*/
cparata	0:489965565a0d	851	LPS22HB_Error_et LPS22HB_Get_DeviceID(void handle, uint8_t deviceid);
cparata	0:489965565a0d	852
cparata	0:489965565a0d	853
cparata	0:489965565a0d	854	/**
cparata	0:489965565a0d	855	* @brief Set LPS22HB Low Power or Low Noise Mode Configuration
cparata	0:489965565a0d	856	* @param LPS22HB_LowNoise or LPS22HB_LowPower mode
cparata	0:489965565a0d	857	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	858	*/
cparata	0:489965565a0d	859	LPS22HB_Error_et LPS22HB_Set_PowerMode(void *handle, LPS22HB_PowerMode_et mode);
cparata	0:489965565a0d	860
cparata	0:489965565a0d	861	/**
cparata	0:489965565a0d	862	* @brief Get LPS22HB Power Mode
cparata	0:489965565a0d	863	* @param Buffer to empty with Mode: Low Noise or Low Current
cparata	0:489965565a0d	864	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	865	*/
cparata	0:489965565a0d	866	LPS22HB_Error_et LPS22HB_Get_PowerMode(void handle, LPS22HB_PowerMode_et mode);
cparata	0:489965565a0d	867
cparata	0:489965565a0d	868
cparata	0:489965565a0d	869	/**
cparata	0:489965565a0d	870	* @brief Set LPS22HB Output Data Rate
cparata	0:489965565a0d	871	* @param Output Data Rate
cparata	0:489965565a0d	872	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	873	*/
cparata	0:489965565a0d	874	LPS22HB_Error_et LPS22HB_Set_Odr(void *handle, LPS22HB_Odr_et odr);
cparata	0:489965565a0d	875
cparata	0:489965565a0d	876
cparata	0:489965565a0d	877	/**
cparata	0:489965565a0d	878	* @brief Get LPS22HB Output Data Rate
cparata	0:489965565a0d	879	* @param Buffer to empty with Output Data Rate
cparata	0:489965565a0d	880	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	881	*/
cparata	0:489965565a0d	882	LPS22HB_Error_et LPS22HB_Get_Odr(void handle, LPS22HB_Odr_et odr);
cparata	0:489965565a0d	883
cparata	0:489965565a0d	884	/**
cparata	0:489965565a0d	885	* @brief Enable/Disale low-pass filter on LPS22HB pressure data
cparata	0:489965565a0d	886	* @param state: enable or disable
cparata	0:489965565a0d	887	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	888	*/
cparata	0:489965565a0d	889	LPS22HB_Error_et LPS22HB_Set_LowPassFilter(void *handle, LPS22HB_State_et state);
cparata	0:489965565a0d	890
cparata	0:489965565a0d	891
cparata	0:489965565a0d	892	/**
cparata	0:489965565a0d	893	* @brief Set low-pass filter cutoff configuration on LPS22HB pressure data
cparata	0:489965565a0d	894	* @param Filter Cutoff ODR/9 or ODR/20
cparata	0:489965565a0d	895	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	896	*/
cparata	0:489965565a0d	897	LPS22HB_Error_et LPS22HB_Set_LowPassFilterCutoff(void *handle, LPS22HB_LPF_Cutoff_et cutoff);
cparata	0:489965565a0d	898
cparata	0:489965565a0d	899	/**
cparata	0:489965565a0d	900	* @brief Set Block Data Update mode
cparata	0:489965565a0d	901	* @param LPS22HB_BDU_CONTINUOS_UPDATE/ LPS22HB_BDU_NO_UPDATE
cparata	0:489965565a0d	902	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	903	*/
cparata	0:489965565a0d	904	LPS22HB_Error_et LPS22HB_Set_Bdu(void *handle, LPS22HB_Bdu_et bdu);
cparata	0:489965565a0d	905
cparata	0:489965565a0d	906
cparata	0:489965565a0d	907	/**
cparata	0:489965565a0d	908	* @brief Get Block Data Update mode
cparata	0:489965565a0d	909	* @param Buffer to empty whit the bdu mode read from sensor
cparata	0:489965565a0d	910	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	911	*/
cparata	0:489965565a0d	912	LPS22HB_Error_et LPS22HB_Get_Bdu(void handle, LPS22HB_Bdu_et bdu);
cparata	0:489965565a0d	913
cparata	0:489965565a0d	914	/**
cparata	0:489965565a0d	915	* @brief Set SPI mode: 3 Wire Interface OR 4 Wire Interface
cparata	0:489965565a0d	916	* @param LPS22HB_SPI_4_WIRE/LPS22HB_SPI_3_WIRE
cparata	0:489965565a0d	917	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	918	*/
cparata	0:489965565a0d	919	LPS22HB_Error_et LPS22HB_Set_SpiInterface(void *handle, LPS22HB_SPIMode_et spimode);
cparata	0:489965565a0d	920
cparata	0:489965565a0d	921	/**
cparata	0:489965565a0d	922	* @brief Get SPI mode: 3 Wire Interface OR 4 Wire Interface
cparata	0:489965565a0d	923	* @param buffer to empty with SPI mode
cparata	0:489965565a0d	924	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	925	*/
cparata	0:489965565a0d	926	LPS22HB_Error_et LPS22HB_Get_SpiInterface(void handle, LPS22HB_SPIMode_et spimode);
cparata	0:489965565a0d	927
cparata	0:489965565a0d	928	/**
cparata	0:489965565a0d	929	* @brief Software Reset
cparata	0:489965565a0d	930	* @param void
cparata	0:489965565a0d	931	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	932	*/
cparata	0:489965565a0d	933	LPS22HB_Error_et LPS22HB_SwReset(void *handle);
cparata	0:489965565a0d	934
cparata	0:489965565a0d	935	/**
cparata	0:489965565a0d	936	* @brief Reboot Memory Content.
cparata	0:489965565a0d	937	* @param void
cparata	0:489965565a0d	938	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	939	*/
cparata	0:489965565a0d	940	LPS22HB_Error_et LPS22HB_MemoryBoot(void *handle);
cparata	0:489965565a0d	941
cparata	0:489965565a0d	942	/**
cparata	0:489965565a0d	943	* @brief Software Reset ann BOOT
cparata	0:489965565a0d	944	* @param void
cparata	0:489965565a0d	945	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	946	*/
cparata	0:489965565a0d	947	LPS22HB_Error_et LPS22HB_SwResetAndMemoryBoot(void *handle);
cparata	0:489965565a0d	948
cparata	0:489965565a0d	949
cparata	0:489965565a0d	950	/**
cparata	0:489965565a0d	951	* @brief Enable or Disable FIFO
cparata	0:489965565a0d	952	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	953	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	954	*/
cparata	0:489965565a0d	955	LPS22HB_Error_et LPS22HB_Set_FifoModeUse(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	956
cparata	0:489965565a0d	957	/**
cparata	0:489965565a0d	958	* @brief Enable or Disable FIFO Watermark level use. Stop on FIFO Threshold
cparata	0:489965565a0d	959	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	960	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	961	*/
cparata	0:489965565a0d	962	LPS22HB_Error_et LPS22HB_Set_FifoWatermarkLevelUse(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	963
cparata	0:489965565a0d	964	/**
cparata	0:489965565a0d	965	* @brief Enable or Disable the Automatic increment register address during a multiple byte access with a serial interface (I2C or SPI)
cparata	0:489965565a0d	966	* @param LPS22HB_ENABLE/LPS22HB_DISABLE. Default is LPS22HB_ENABLE
cparata	0:489965565a0d	967	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	968	*/
cparata	0:489965565a0d	969	LPS22HB_Error_et LPS22HB_Set_AutomaticIncrementRegAddress(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	970
cparata	0:489965565a0d	971
cparata	0:489965565a0d	972	/**
cparata	0:489965565a0d	973	* @brief Set One Shot bit to start a new conversion (ODR mode has to be 000)
cparata	0:489965565a0d	974	* @param void
cparata	0:489965565a0d	975	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	976	*/
cparata	0:489965565a0d	977	LPS22HB_Error_et LPS22HB_StartOneShotMeasurement(void *handle);
cparata	0:489965565a0d	978
cparata	0:489965565a0d	979	/**
cparata	0:489965565a0d	980	* @brief Enable/Disable I2C
cparata	0:489965565a0d	981	* @param State. Enable (reset bit)/ Disable (set bit)
cparata	0:489965565a0d	982	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	983	*/
cparata	0:489965565a0d	984	LPS22HB_Error_et LPS22HB_Set_I2C(void *handle, LPS22HB_State_et i2cstate);
cparata	0:489965565a0d	985
cparata	0:489965565a0d	986
cparata	0:489965565a0d	987	/CTRL_REG3 Interrupt Control/
cparata	0:489965565a0d	988	/**
cparata	0:489965565a0d	989	* @brief Set Interrupt Active on High or Low Level
cparata	0:489965565a0d	990	* @param LPS22HB_ActiveHigh/LPS22HB_ActiveLow
cparata	0:489965565a0d	991	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	992	*/
cparata	0:489965565a0d	993	LPS22HB_Error_et LPS22HB_Set_InterruptActiveLevel(void *handle, LPS22HB_InterruptActiveLevel_et mode);
cparata	0:489965565a0d	994
cparata	0:489965565a0d	995	/**
cparata	0:489965565a0d	996	* @brief Set Push-pull/open drain selection on interrupt pads.
cparata	0:489965565a0d	997	* @param LPS22HB_PushPull/LPS22HB_OpenDrain
cparata	0:489965565a0d	998	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	999	*/
cparata	0:489965565a0d	1000	LPS22HB_Error_et LPS22HB_Set_InterruptOutputType(void *handle, LPS22HB_OutputType_et output);
cparata	0:489965565a0d	1001
cparata	0:489965565a0d	1002	/**
cparata	0:489965565a0d	1003	* @brief Set Data signal on INT1 pad control bits.
cparata	0:489965565a0d	1004	* @param LPS22HB_DATA,LPS22HB_P_HIGH_LPS22HB_P_LOW,LPS22HB_P_LOW_HIGH
cparata	0:489965565a0d	1005	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1006	*/
cparata	0:489965565a0d	1007	LPS22HB_Error_et LPS22HB_Set_InterruptControlConfig(void *handle, LPS22HB_OutputSignalConfig_et config);
cparata	0:489965565a0d	1008
cparata	0:489965565a0d	1009
cparata	0:489965565a0d	1010	/**
cparata	0:489965565a0d	1011	* @brief Enable/Disable Data-ready signal on INT_DRDY pin.
cparata	0:489965565a0d	1012	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1013	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1014	*/
cparata	0:489965565a0d	1015	LPS22HB_Error_et LPS22HB_Set_DRDYInterrupt(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1016
cparata	0:489965565a0d	1017	/**
cparata	0:489965565a0d	1018	* @brief Enable/Disable FIFO overrun interrupt on INT_DRDY pin.
cparata	0:489965565a0d	1019	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1020	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1021	*/
cparata	0:489965565a0d	1022	LPS22HB_Error_et LPS22HB_Set_FIFO_OVR_Interrupt(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1023
cparata	0:489965565a0d	1024	/**
cparata	0:489965565a0d	1025	* @brief Enable/Disable FIFO threshold (Watermark) interrupt on INT_DRDY pin.
cparata	0:489965565a0d	1026	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1027	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1028	*/
cparata	0:489965565a0d	1029	LPS22HB_Error_et LPS22HB_Set_FIFO_FTH_Interrupt(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1030
cparata	0:489965565a0d	1031	/**
cparata	0:489965565a0d	1032	* @brief Enable/Disable FIFO FULL interrupt on INT_DRDY pin.
cparata	0:489965565a0d	1033	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1034	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1035	*/
cparata	0:489965565a0d	1036	LPS22HB_Error_et LPS22HB_Set_FIFO_FULL_Interrupt(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1037
cparata	0:489965565a0d	1038	/**
cparata	0:489965565a0d	1039	* @brief Enable AutoRifP function
cparata	0:489965565a0d	1040	* @param none
cparata	0:489965565a0d	1041	* @detail When this function is enabled, an internal register is set with the current pressure values
cparata	0:489965565a0d	1042	* and the content is subtracted from the pressure output value and result is used for the interrupt generation.
cparata	0:489965565a0d	1043	* the AutoRifP is slf creared.
cparata	0:489965565a0d	1044	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1045	*/
cparata	0:489965565a0d	1046	LPS22HB_Error_et LPS22HB_Set_AutoRifP(void *handle);
cparata	0:489965565a0d	1047
cparata	0:489965565a0d	1048	/**
cparata	0:489965565a0d	1049	* @brief Disable AutoRifP
cparata	0:489965565a0d	1050	* @param none
cparata	0:489965565a0d	1051	* @detail the RESET_ARP bit is used to disable the AUTORIFP function. This bis i is selfdleared
cparata	0:489965565a0d	1052	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1053	*/
cparata	0:489965565a0d	1054	LPS22HB_Error_et LPS22HB_ResetAutoRifP(void *handle);
cparata	0:489965565a0d	1055
cparata	0:489965565a0d	1056	/**?????
cparata	0:489965565a0d	1057	* @brief Set AutoZero Function bit
cparata	0:489965565a0d	1058	* @detail When set to ‘1’, the actual pressure output is copied in the REF_P reg (@0x15..0x17)
cparata	0:489965565a0d	1059	* @param None
cparata	0:489965565a0d	1060	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1061	*/
cparata	0:489965565a0d	1062	LPS22HB_Error_et LPS22HB_Set_AutoZeroFunction(void *handle);
cparata	0:489965565a0d	1063
cparata	0:489965565a0d	1064	/**???
cparata	0:489965565a0d	1065	* @brief Set ResetAutoZero Function bit
cparata	0:489965565a0d	1066	* @details REF_P reg (@0x015..17) set pressure reference to default value RPDS reg (0x18/19).
cparata	0:489965565a0d	1067	* @param None
cparata	0:489965565a0d	1068	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1069	*/
cparata	0:489965565a0d	1070	LPS22HB_Error_et LPS22HB_ResetAutoZeroFunction(void *handle);
cparata	0:489965565a0d	1071
cparata	0:489965565a0d	1072
cparata	0:489965565a0d	1073	/**
cparata	0:489965565a0d	1074	* @brief Enable/ Disable the computing of differential pressure output (Interrupt Generation)
cparata	0:489965565a0d	1075	* @param LPS22HB_ENABLE,LPS22HB_DISABLE
cparata	0:489965565a0d	1076	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1077	*/
cparata	0:489965565a0d	1078	LPS22HB_Error_et LPS22HB_Set_InterruptDifferentialGeneration(void *handle, LPS22HB_State_et diff_en) ;
cparata	0:489965565a0d	1079
cparata	0:489965565a0d	1080
cparata	0:489965565a0d	1081
cparata	0:489965565a0d	1082	/**
cparata	0:489965565a0d	1083	* @brief Get the DIFF_EN bit value
cparata	0:489965565a0d	1084	* @param buffer to empty with the read value of DIFF_EN bit
cparata	0:489965565a0d	1085	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1086	*/
cparata	0:489965565a0d	1087	LPS22HB_Error_et LPS22HB_Get_InterruptDifferentialGeneration(void handle, LPS22HB_State_et diff_en);
cparata	0:489965565a0d	1088
cparata	0:489965565a0d	1089
cparata	0:489965565a0d	1090	/**
cparata	0:489965565a0d	1091	* @brief Latch Interrupt request to the INT_SOURCE register.
cparata	0:489965565a0d	1092	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1093	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1094	*/
cparata	0:489965565a0d	1095	LPS22HB_Error_et LPS22HB_LatchInterruptRequest(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1096
cparata	0:489965565a0d	1097	/**
cparata	0:489965565a0d	1098	* @brief Enable\Disable Interrupt Generation on differential pressure Low event
cparata	0:489965565a0d	1099	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1100	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1101	*/
cparata	0:489965565a0d	1102	LPS22HB_Error_et LPS22HB_Set_PLE(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1103
cparata	0:489965565a0d	1104	/**
cparata	0:489965565a0d	1105	* @brief Enable\Disable Interrupt Generation on differential pressure High event
cparata	0:489965565a0d	1106	* @param LPS22HB_ENABLE/LPS22HB_DISABLE
cparata	0:489965565a0d	1107	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1108	*/
cparata	0:489965565a0d	1109	LPS22HB_Error_et LPS22HB_Set_PHE(void *handle, LPS22HB_State_et status);
cparata	0:489965565a0d	1110
cparata	0:489965565a0d	1111	/**
cparata	0:489965565a0d	1112	* @brief Get the Interrupt Generation on differential pressure status event and the Boot Status.
cparata	0:489965565a0d	1113	* @detail The INT_SOURCE register is cleared by reading it.
cparata	0:489965565a0d	1114	* @param Status Event Flag: BOOT, PH,PL,IA
cparata	0:489965565a0d	1115	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1116	*/
cparata	0:489965565a0d	1117	LPS22HB_Error_et LPS22HB_Get_InterruptDifferentialEventStatus(void handle, LPS22HB_InterruptDiffStatus_st interruptsource);
cparata	0:489965565a0d	1118
cparata	0:489965565a0d	1119
cparata	0:489965565a0d	1120	/**
cparata	0:489965565a0d	1121	* @brief Get the status of Pressure and Temperature data
cparata	0:489965565a0d	1122	* @param Data Status Flag: TempDataAvailable, TempDataOverrun, PressDataAvailable, PressDataOverrun
cparata	0:489965565a0d	1123	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1124	*/
cparata	0:489965565a0d	1125	LPS22HB_Error_et LPS22HB_Get_DataStatus(void handle, LPS22HB_DataStatus_st datastatus);
cparata	0:489965565a0d	1126
cparata	0:489965565a0d	1127
cparata	0:489965565a0d	1128	/**
cparata	0:489965565a0d	1129	* @brief Get the LPS22HB raw presure value
cparata	0:489965565a0d	1130	* @param The buffer to empty with the pressure raw value
cparata	0:489965565a0d	1131	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1132	*/
cparata	0:489965565a0d	1133	LPS22HB_Error_et LPS22HB_Get_RawPressure(void handle, int32_t raw_press);
cparata	0:489965565a0d	1134
cparata	0:489965565a0d	1135	/**
cparata	0:489965565a0d	1136	* @brief Get the LPS22HB Pressure value in hPA.
cparata	0:489965565a0d	1137	* @param The buffer to empty with the pressure value that must be divided by 100 to get the value in hPA
cparata	0:489965565a0d	1138	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1139	*/
cparata	0:489965565a0d	1140	LPS22HB_Error_et LPS22HB_Get_Pressure(void handle, int32_t Pout);
cparata	0:489965565a0d	1141
cparata	0:489965565a0d	1142	/**
cparata	0:489965565a0d	1143	* @brief Read LPS22HB output register, and calculate the raw temperature.
cparata	0:489965565a0d	1144	* @param The buffer to empty with the temperature raw value
cparata	0:489965565a0d	1145	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1146	*/
cparata	0:489965565a0d	1147	LPS22HB_Error_et LPS22HB_Get_RawTemperature(void handle, int16_t raw_data);
cparata	0:489965565a0d	1148
cparata	0:489965565a0d	1149	/**
cparata	0:489965565a0d	1150	* @brief Read the Temperature value in °C.
cparata	0:489965565a0d	1151	* @param The buffer to empty with the temperature value that must be divided by 10 to get the value in ['C]
cparata	0:489965565a0d	1152	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1153	*/
cparata	0:489965565a0d	1154	LPS22HB_Error_et LPS22HB_Get_Temperature(void handle, int16_t Tout);
cparata	0:489965565a0d	1155
cparata	0:489965565a0d	1156	/**
cparata	0:489965565a0d	1157	* @brief Get the threshold value used for pressure interrupt generation.
cparata	0:489965565a0d	1158	* @param The buffer to empty with the temperature value
cparata	0:489965565a0d	1159	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1160	*/
cparata	0:489965565a0d	1161	LPS22HB_Error_et LPS22HB_Get_PressureThreshold(void handle, int16_t P_ths);
cparata	0:489965565a0d	1162
cparata	0:489965565a0d	1163	/**
cparata	0:489965565a0d	1164	* @brief Set the threshold value used for pressure interrupt generation.
cparata	0:489965565a0d	1165	* @param The buffer to empty with the temperature value
cparata	0:489965565a0d	1166	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1167	*/
cparata	0:489965565a0d	1168	LPS22HB_Error_et LPS22HB_Set_PressureThreshold(void *handle, int16_t P_ths);
cparata	0:489965565a0d	1169
cparata	0:489965565a0d	1170	/**
cparata	0:489965565a0d	1171	* @brief Set Fifo Mode.
cparata	0:489965565a0d	1172	* @param Fifo Mode struct
cparata	0:489965565a0d	1173	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1174	*/
cparata	0:489965565a0d	1175	LPS22HB_Error_et LPS22HB_Set_FifoMode(void *handle, LPS22HB_FifoMode_et fifomode);
cparata	0:489965565a0d	1176	/**
cparata	0:489965565a0d	1177	* @brief Get Fifo Mode.
cparata	0:489965565a0d	1178	* @param Buffer to empty with fifo mode value
cparata	0:489965565a0d	1179	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1180	*/
cparata	0:489965565a0d	1181	LPS22HB_Error_et LPS22HB_Get_FifoMode(void handle, LPS22HB_FifoMode_et fifomode);
cparata	0:489965565a0d	1182
cparata	0:489965565a0d	1183	/**
cparata	0:489965565a0d	1184	* @brief Set Fifo Watermark Level.
cparata	0:489965565a0d	1185	* @param Watermark level value [0 31]
cparata	0:489965565a0d	1186	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1187	*/
cparata	0:489965565a0d	1188	LPS22HB_Error_et LPS22HB_Set_FifoWatermarkLevel(void *handle, uint8_t wtmlevel);
cparata	0:489965565a0d	1189
cparata	0:489965565a0d	1190	/**
cparata	0:489965565a0d	1191	* @brief Get FIFO Watermark Level
cparata	0:489965565a0d	1192	* @param buffer to empty with watermak level[0,31] value read from sensor
cparata	0:489965565a0d	1193	* @retval Status [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1194	*/
cparata	0:489965565a0d	1195	LPS22HB_Error_et LPS22HB_Get_FifoWatermarkLevel(void handle, uint8_t wtmlevel);
cparata	0:489965565a0d	1196
cparata	0:489965565a0d	1197
cparata	0:489965565a0d	1198	/**
cparata	0:489965565a0d	1199	* @brief Get Fifo Status.
cparata	0:489965565a0d	1200	* @param Buffer to empty with fifo status
cparata	0:489965565a0d	1201	* @retval Status [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1202	*/
cparata	0:489965565a0d	1203	LPS22HB_Error_et LPS22HB_Get_FifoStatus(void handle, LPS22HB_FifoStatus_st status);
cparata	0:489965565a0d	1204
cparata	0:489965565a0d	1205
cparata	0:489965565a0d	1206	/**
cparata	0:489965565a0d	1207	* @brief Get the reference pressure after soldering for computing differential pressure (hPA)
cparata	0:489965565a0d	1208	* @param buffer to empty with the he pressure value (hPA)
cparata	0:489965565a0d	1209	* @retval Status [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1210	*/
cparata	0:489965565a0d	1211	LPS22HB_Error_et LPS22HB_Get_PressureOffsetValue(void handle, int16_t pressoffset);
cparata	0:489965565a0d	1212
cparata	0:489965565a0d	1213	/**
cparata	0:489965565a0d	1214	* @brief Get the Reference Pressure value
cparata	0:489965565a0d	1215	* @detail It is a 24-bit data added to the sensor output measurement to detect a measured pressure beyond programmed limits.
cparata	0:489965565a0d	1216	* @param Buffer to empty with reference pressure value
cparata	0:489965565a0d	1217	* @retval Status [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1218	*/
cparata	0:489965565a0d	1219	LPS22HB_Error_et LPS22HB_Get_ReferencePressure(void handle, int32_t RefP);
cparata	0:489965565a0d	1220
cparata	0:489965565a0d	1221
cparata	0:489965565a0d	1222	/**
cparata	0:489965565a0d	1223	* @brief Check if the single measurement has completed.
cparata	0:489965565a0d	1224	* @param the returned value is set to 1, when the measurement is completed
cparata	0:489965565a0d	1225	* @retval Status [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1226	*/
cparata	0:489965565a0d	1227	LPS22HB_Error_et LPS22HB_IsMeasurementCompleted(void handle, uint8_t Is_Measurement_Completed);
cparata	0:489965565a0d	1228
cparata	0:489965565a0d	1229
cparata	0:489965565a0d	1230	/**
cparata	0:489965565a0d	1231	* @brief Get the values of the last single measurement.
cparata	0:489965565a0d	1232	* @param Pressure and temperature value
cparata	0:489965565a0d	1233	* @retvalStatus [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1234	*/
cparata	0:489965565a0d	1235	LPS22HB_Error_et LPS22HB_Get_Measurement(void handle, LPS22HB_MeasureTypeDef_st Measurement_Value);
cparata	0:489965565a0d	1236
cparata	0:489965565a0d	1237
cparata	0:489965565a0d	1238	/**
cparata	0:489965565a0d	1239	* @brief Set Generic Configuration
cparata	0:489965565a0d	1240	* @param Struct to empty with the chosen values
cparata	0:489965565a0d	1241	* @retval Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1242	*/
cparata	0:489965565a0d	1243	LPS22HB_Error_et LPS22HB_Set_GenericConfig(void handle, LPS22HB_ConfigTypeDef_st pxLPS22HBInit);
cparata	0:489965565a0d	1244
cparata	0:489965565a0d	1245	/**
cparata	0:489965565a0d	1246	* @brief Get Generic configuration
cparata	0:489965565a0d	1247	* @param Struct to empty with configuration values
cparata	0:489965565a0d	1248	* @retval Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1249	*/
cparata	0:489965565a0d	1250	LPS22HB_Error_et LPS22HB_Get_GenericConfig(void handle, LPS22HB_ConfigTypeDef_st pxLPS22HBInit);
cparata	0:489965565a0d	1251
cparata	0:489965565a0d	1252	/**
cparata	0:489965565a0d	1253	* @brief Set Interrupt configuration
cparata	0:489965565a0d	1254	* @param Struct holding the configuration values
cparata	0:489965565a0d	1255	* @retval Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1256	*/
cparata	0:489965565a0d	1257	LPS22HB_Error_et LPS22HB_Set_InterruptConfig(void handle, LPS22HB_InterruptTypeDef_st pLPS22HBInt);
cparata	0:489965565a0d	1258
cparata	0:489965565a0d	1259	/**
cparata	0:489965565a0d	1260	* @brief LPS22HBGet_InterruptConfig
cparata	0:489965565a0d	1261	* @param Struct to empty with configuration values
cparata	0:489965565a0d	1262	* @retval S Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1263	*/
cparata	0:489965565a0d	1264	LPS22HB_Error_et LPS22HB_Get_InterruptConfig(void handle, LPS22HB_InterruptTypeDef_st pLPS22HBInt);
cparata	0:489965565a0d	1265
cparata	0:489965565a0d	1266	/**
cparata	0:489965565a0d	1267	* @brief Set Fifo configuration
cparata	0:489965565a0d	1268	* @param Struct holding the configuration values
cparata	0:489965565a0d	1269	* @retval Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1270	*/
cparata	0:489965565a0d	1271	LPS22HB_Error_et LPS22HB_Set_FifoConfig(void handle, LPS22HB_FIFOTypeDef_st pLPS22HBFIFO);
cparata	0:489965565a0d	1272
cparata	0:489965565a0d	1273	/**
cparata	0:489965565a0d	1274	* @brief Get Fifo configuration
cparata	0:489965565a0d	1275	* @param Struct to empty with the configuration values
cparata	0:489965565a0d	1276	* @retval Error code[LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1277	*/
cparata	0:489965565a0d	1278	LPS22HB_Error_et LPS22HB_Get_FifoConfig(void handle, LPS22HB_FIFOTypeDef_st pLPS22HBFIFO);
cparata	0:489965565a0d	1279
cparata	0:489965565a0d	1280	/**
cparata	0:489965565a0d	1281	* @brief Clock Tree Confoguration
cparata	0:489965565a0d	1282	* @param LPS22HB_CTE_NotBalanced, LPS22HB_CTE_ABalanced
cparata	0:489965565a0d	1283	* @retval Error Code [LPS22HB_ERROR, LPS22HB_OK]
cparata	0:489965565a0d	1284	*/
cparata	0:489965565a0d	1285	LPS22HB_Error_et LPS22HB_Set_ClockTreeConfifuration(void *handle, LPS22HB_CTE_et mode);
cparata	0:489965565a0d	1286
cparata	0:489965565a0d	1287	/**
cparata	0:489965565a0d	1288	* @}
cparata	0:489965565a0d	1289	*/
cparata	0:489965565a0d	1290
cparata	0:489965565a0d	1291	/**
cparata	0:489965565a0d	1292	* @}
cparata	0:489965565a0d	1293	*/
cparata	0:489965565a0d	1294
cparata	0:489965565a0d	1295	/**
cparata	0:489965565a0d	1296	* @}
cparata	0:489965565a0d	1297	*/
cparata	0:489965565a0d	1298
cparata	0:489965565a0d	1299	#ifdef __cplusplus
cparata	0:489965565a0d	1300	}
cparata	0:489965565a0d	1301	#endif
cparata	0:489965565a0d	1302
cparata	0:489965565a0d	1303	#endif /* __LPS22HB_DRIVER__H */
cparata	0:489965565a0d	1304
cparata	0:489965565a0d	1305	/***************** (C) COPYRIGHT 2013 STMicroelectronics *END OF FILE**/

Repository toolbox

Export to desktop IDE

Build repository

Repository details

Type:	Program
Mbed OS support:	Mbed 2 deprecated
Created:	16 Dec 2016
Imports:	126
Forks:	0
Commits:	17
Dependents:	0
Dependencies:	2
Followers:	401

The code in this repository is Apache licensed.

Tilt Detection Demo Application based on sensor expansion board X-NUCLEO-IKS01A2

X_NUCLEO_IKS01A2/Components/LPS22HBSensor/LPS22HB_Driver.h@2:39ad2a393143, 2016-08-19 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning