Diff: STTS751Sensor.h

Revision:

0:128dae13c732

Child:

1:5859badee052

diff -r 000000000000 -r 128dae13c732 STTS751Sensor.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/STTS751Sensor.h	Wed Mar 06 10:18:41 2019 +0000
@@ -0,0 +1,162 @@
+/**
+ ******************************************************************************
+ * @file    STTS751Sensor.h
+ * @author  SRA
+ * @version V1.0.0
+ * @date    February 2018
+ * @brief   Abstract Class of a STTS751 temperature sensor.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *   1. Redistributions of source code must retain the above copyright notice,
+ *      this list of conditions and the following disclaimer.
+ *   2. Redistributions in binary form must reproduce the above copyright notice,
+ *      this list of conditions and the following disclaimer in the documentation
+ *      and/or other materials provided with the distribution.
+ *   3. Neither the name of STMicroelectronics nor the names of its contributors
+ *      may be used to endorse or promote products derived from this software
+ *      without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+
+/* Prevent recursive inclusion -----------------------------------------------*/
+
+#ifndef __STTS751Sensor_H__
+#define __STTS751Sensor_H__
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "DevI2C.h"
+#include "stts751_reg.h"
+#include "TempSensor.h"
+#include <assert.h>
+
+/* Defines -------------------------------------------------------------------*/
+/* Typedefs ------------------------------------------------------------------*/
+/* Class Declaration ---------------------------------------------------------*/
+   
+/**
+ * Abstract class of a STTS751 temperature sensor.
+ */
+class STTS751Sensor : public TempSensor
+{
+  public:
+    
+    STTS751Sensor(DevI2C *i2c, uint8_t address=STTS751_0xxxx_ADD_7K5, PinName int_pin=NC);
+    virtual int init(void *init);
+    virtual int read_id(uint8_t *id);
+    virtual int get_temperature(float *value);
+    int enable(void);
+    int disable(void);
+    int get_odr(float *odr);
+    int set_odr(float odr);
+    int read_reg(uint8_t reg, uint8_t *data);
+    int write_reg(uint8_t reg, uint8_t data);
+    int get_temp_drdy_status(uint8_t *status);
+    int set_low_temp_thr(float value);
+    int set_high_temp_thr(float value);
+    int get_temp_limit_status(uint8_t *high_limit, uint8_t *low_limit, uint8_t *therm_limit);
+    int set_event_pin(uint8_t enable);
+    int set_one_shot();
+    int get_one_shot_status(uint8_t *status);
+
+    /**
+     * @brief  Attaching an interrupt handler to the INT interrupt.
+     * @param  fptr an interrupt handler.
+     * @retval None.
+     */
+    void attach_int_irq(void (*fptr)(void))
+    {
+        _int_irq.fall(fptr);
+    }
+
+    /**
+     * @brief  Enabling the INT interrupt handling.
+     * @param  None.
+     * @retval None.
+     */
+    void enable_int_irq(void)
+    {
+        _int_irq.enable_irq();
+    }
+    
+    /**
+     * @brief  Disabling the INT interrupt handling.
+     * @param  None.
+     * @retval None.
+     */
+    void disable_int_irq(void)
+    {
+        _int_irq.disable_irq();
+    }
+
+
+    /**
+     * @brief Utility function to read data.
+     * @param  pBuffer: pointer to data to be read.
+     * @param  RegisterAddr: specifies internal address register to be read.
+     * @param  NumByteToRead: number of bytes to be read.
+     * @retval 0 if ok, an error code otherwise.
+     */
+    uint8_t io_read(uint8_t* pBuffer, uint8_t RegisterAddr, uint16_t NumByteToRead)
+    {           
+        if (_dev_i2c) return (uint8_t) _dev_i2c->i2c_read(pBuffer, _address, RegisterAddr, NumByteToRead);
+        return 1;
+    }
+    
+    /**
+     * @brief Utility function to write data.
+     * @param  pBuffer: pointer to data to be written.
+     * @param  RegisterAddr: specifies internal address register to be written.
+     * @param  NumByteToWrite: number of bytes to write.
+     * @retval 0 if ok, an error code otherwise.
+     */
+    uint8_t io_write(uint8_t* pBuffer, uint8_t RegisterAddr, uint16_t NumByteToWrite)
+    {
+        if (_dev_i2c) return (uint8_t) _dev_i2c->i2c_write(pBuffer, _address, RegisterAddr, NumByteToWrite);    
+        return 1;
+    }
+
+  private:
+
+    /* Helper classes. */
+    DevI2C *_dev_i2c;
+    
+    /* Configuration */
+    uint8_t _address;
+    InterruptIn _int_irq;   
+    
+    uint8_t _is_enabled;
+    float _last_odr;
+    
+    stts751_ctx_t _reg_ctx;
+};
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+int32_t STTS751_io_write( void *handle, uint8_t WriteAddr, uint8_t *pBuffer, uint16_t nBytesToWrite );
+int32_t STTS751_io_read( void *handle, uint8_t ReadAddr, uint8_t *pBuffer, uint16_t nBytesToRead );
+#ifdef __cplusplus
+  }
+#endif
+
+#endif