Low voltage digital temperature sensor

Dependencies:   X_NUCLEO_COMMON ST_INTERFACES

Dependents:   X_NUCLEO_IKS01A3 X_NUCLEO_IKS01A3 X_NUCLEO_IKS01A3

Committer:
cparata
Date:
Wed Jul 24 14:20:10 2019 +0000
Revision:
1:5859badee052
Parent:
0:128dae13c732
Format with Astyle

Who changed what in which revision?

UserRevisionLine numberNew contents of line
cparata 0:128dae13c732 1 /**
cparata 0:128dae13c732 2 ******************************************************************************
cparata 0:128dae13c732 3 * @file STTS751Sensor.h
cparata 0:128dae13c732 4 * @author SRA
cparata 0:128dae13c732 5 * @version V1.0.0
cparata 0:128dae13c732 6 * @date February 2018
cparata 0:128dae13c732 7 * @brief Abstract Class of a STTS751 temperature sensor.
cparata 0:128dae13c732 8 ******************************************************************************
cparata 0:128dae13c732 9 * @attention
cparata 0:128dae13c732 10 *
cparata 0:128dae13c732 11 * <h2><center>&copy; COPYRIGHT(c) 2019 STMicroelectronics</center></h2>
cparata 0:128dae13c732 12 *
cparata 0:128dae13c732 13 * Redistribution and use in source and binary forms, with or without modification,
cparata 0:128dae13c732 14 * are permitted provided that the following conditions are met:
cparata 0:128dae13c732 15 * 1. Redistributions of source code must retain the above copyright notice,
cparata 0:128dae13c732 16 * this list of conditions and the following disclaimer.
cparata 0:128dae13c732 17 * 2. Redistributions in binary form must reproduce the above copyright notice,
cparata 0:128dae13c732 18 * this list of conditions and the following disclaimer in the documentation
cparata 0:128dae13c732 19 * and/or other materials provided with the distribution.
cparata 0:128dae13c732 20 * 3. Neither the name of STMicroelectronics nor the names of its contributors
cparata 0:128dae13c732 21 * may be used to endorse or promote products derived from this software
cparata 0:128dae13c732 22 * without specific prior written permission.
cparata 0:128dae13c732 23 *
cparata 0:128dae13c732 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
cparata 0:128dae13c732 25 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
cparata 0:128dae13c732 26 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
cparata 0:128dae13c732 27 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
cparata 0:128dae13c732 28 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
cparata 0:128dae13c732 29 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
cparata 0:128dae13c732 30 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
cparata 0:128dae13c732 31 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
cparata 0:128dae13c732 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
cparata 0:128dae13c732 33 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
cparata 0:128dae13c732 34 *
cparata 0:128dae13c732 35 ******************************************************************************
cparata 0:128dae13c732 36 */
cparata 0:128dae13c732 37
cparata 0:128dae13c732 38
cparata 0:128dae13c732 39 /* Prevent recursive inclusion -----------------------------------------------*/
cparata 0:128dae13c732 40
cparata 0:128dae13c732 41 #ifndef __STTS751Sensor_H__
cparata 0:128dae13c732 42 #define __STTS751Sensor_H__
cparata 0:128dae13c732 43
cparata 0:128dae13c732 44
cparata 0:128dae13c732 45 /* Includes ------------------------------------------------------------------*/
cparata 0:128dae13c732 46
cparata 0:128dae13c732 47 #include "DevI2C.h"
cparata 0:128dae13c732 48 #include "stts751_reg.h"
cparata 0:128dae13c732 49 #include "TempSensor.h"
cparata 0:128dae13c732 50 #include <assert.h>
cparata 0:128dae13c732 51
cparata 0:128dae13c732 52 /* Defines -------------------------------------------------------------------*/
cparata 0:128dae13c732 53 /* Typedefs ------------------------------------------------------------------*/
cparata 0:128dae13c732 54 /* Class Declaration ---------------------------------------------------------*/
cparata 1:5859badee052 55
cparata 0:128dae13c732 56 /**
cparata 0:128dae13c732 57 * Abstract class of a STTS751 temperature sensor.
cparata 0:128dae13c732 58 */
cparata 1:5859badee052 59 class STTS751Sensor : public TempSensor {
cparata 1:5859badee052 60 public:
cparata 1:5859badee052 61
cparata 1:5859badee052 62 STTS751Sensor(DevI2C *i2c, uint8_t address = STTS751_0xxxx_ADD_7K5, PinName int_pin = NC);
cparata 0:128dae13c732 63 virtual int init(void *init);
cparata 0:128dae13c732 64 virtual int read_id(uint8_t *id);
cparata 0:128dae13c732 65 virtual int get_temperature(float *value);
cparata 0:128dae13c732 66 int enable(void);
cparata 0:128dae13c732 67 int disable(void);
cparata 0:128dae13c732 68 int get_odr(float *odr);
cparata 0:128dae13c732 69 int set_odr(float odr);
cparata 0:128dae13c732 70 int read_reg(uint8_t reg, uint8_t *data);
cparata 0:128dae13c732 71 int write_reg(uint8_t reg, uint8_t data);
cparata 0:128dae13c732 72 int get_temp_drdy_status(uint8_t *status);
cparata 0:128dae13c732 73 int set_low_temp_thr(float value);
cparata 0:128dae13c732 74 int set_high_temp_thr(float value);
cparata 0:128dae13c732 75 int get_temp_limit_status(uint8_t *high_limit, uint8_t *low_limit, uint8_t *therm_limit);
cparata 0:128dae13c732 76 int set_event_pin(uint8_t enable);
cparata 0:128dae13c732 77 int set_one_shot();
cparata 0:128dae13c732 78 int get_one_shot_status(uint8_t *status);
cparata 0:128dae13c732 79
cparata 0:128dae13c732 80 /**
cparata 0:128dae13c732 81 * @brief Attaching an interrupt handler to the INT interrupt.
cparata 0:128dae13c732 82 * @param fptr an interrupt handler.
cparata 0:128dae13c732 83 * @retval None.
cparata 0:128dae13c732 84 */
cparata 0:128dae13c732 85 void attach_int_irq(void (*fptr)(void))
cparata 0:128dae13c732 86 {
cparata 0:128dae13c732 87 _int_irq.fall(fptr);
cparata 0:128dae13c732 88 }
cparata 0:128dae13c732 89
cparata 0:128dae13c732 90 /**
cparata 0:128dae13c732 91 * @brief Enabling the INT interrupt handling.
cparata 0:128dae13c732 92 * @param None.
cparata 0:128dae13c732 93 * @retval None.
cparata 0:128dae13c732 94 */
cparata 0:128dae13c732 95 void enable_int_irq(void)
cparata 0:128dae13c732 96 {
cparata 0:128dae13c732 97 _int_irq.enable_irq();
cparata 0:128dae13c732 98 }
cparata 1:5859badee052 99
cparata 0:128dae13c732 100 /**
cparata 0:128dae13c732 101 * @brief Disabling the INT interrupt handling.
cparata 0:128dae13c732 102 * @param None.
cparata 0:128dae13c732 103 * @retval None.
cparata 0:128dae13c732 104 */
cparata 0:128dae13c732 105 void disable_int_irq(void)
cparata 0:128dae13c732 106 {
cparata 0:128dae13c732 107 _int_irq.disable_irq();
cparata 0:128dae13c732 108 }
cparata 0:128dae13c732 109
cparata 0:128dae13c732 110
cparata 0:128dae13c732 111 /**
cparata 0:128dae13c732 112 * @brief Utility function to read data.
cparata 0:128dae13c732 113 * @param pBuffer: pointer to data to be read.
cparata 0:128dae13c732 114 * @param RegisterAddr: specifies internal address register to be read.
cparata 0:128dae13c732 115 * @param NumByteToRead: number of bytes to be read.
cparata 0:128dae13c732 116 * @retval 0 if ok, an error code otherwise.
cparata 0:128dae13c732 117 */
cparata 1:5859badee052 118 uint8_t io_read(uint8_t *pBuffer, uint8_t RegisterAddr, uint16_t NumByteToRead)
cparata 1:5859badee052 119 {
cparata 1:5859badee052 120 if (_dev_i2c) {
cparata 1:5859badee052 121 return (uint8_t) _dev_i2c->i2c_read(pBuffer, _address, RegisterAddr, NumByteToRead);
cparata 1:5859badee052 122 }
cparata 0:128dae13c732 123 return 1;
cparata 0:128dae13c732 124 }
cparata 1:5859badee052 125
cparata 0:128dae13c732 126 /**
cparata 0:128dae13c732 127 * @brief Utility function to write data.
cparata 0:128dae13c732 128 * @param pBuffer: pointer to data to be written.
cparata 0:128dae13c732 129 * @param RegisterAddr: specifies internal address register to be written.
cparata 0:128dae13c732 130 * @param NumByteToWrite: number of bytes to write.
cparata 0:128dae13c732 131 * @retval 0 if ok, an error code otherwise.
cparata 0:128dae13c732 132 */
cparata 1:5859badee052 133 uint8_t io_write(uint8_t *pBuffer, uint8_t RegisterAddr, uint16_t NumByteToWrite)
cparata 0:128dae13c732 134 {
cparata 1:5859badee052 135 if (_dev_i2c) {
cparata 1:5859badee052 136 return (uint8_t) _dev_i2c->i2c_write(pBuffer, _address, RegisterAddr, NumByteToWrite);
cparata 1:5859badee052 137 }
cparata 0:128dae13c732 138 return 1;
cparata 0:128dae13c732 139 }
cparata 0:128dae13c732 140
cparata 1:5859badee052 141 private:
cparata 0:128dae13c732 142
cparata 0:128dae13c732 143 /* Helper classes. */
cparata 0:128dae13c732 144 DevI2C *_dev_i2c;
cparata 1:5859badee052 145
cparata 0:128dae13c732 146 /* Configuration */
cparata 0:128dae13c732 147 uint8_t _address;
cparata 1:5859badee052 148 InterruptIn _int_irq;
cparata 1:5859badee052 149
cparata 0:128dae13c732 150 uint8_t _is_enabled;
cparata 0:128dae13c732 151 float _last_odr;
cparata 1:5859badee052 152
cparata 0:128dae13c732 153 stts751_ctx_t _reg_ctx;
cparata 0:128dae13c732 154 };
cparata 0:128dae13c732 155
cparata 0:128dae13c732 156 #ifdef __cplusplus
cparata 1:5859badee052 157 extern "C" {
cparata 0:128dae13c732 158 #endif
cparata 1:5859badee052 159 int32_t STTS751_io_write(void *handle, uint8_t WriteAddr, uint8_t *pBuffer, uint16_t nBytesToWrite);
cparata 1:5859badee052 160 int32_t STTS751_io_read(void *handle, uint8_t ReadAddr, uint8_t *pBuffer, uint16_t nBytesToRead);
cparata 0:128dae13c732 161 #ifdef __cplusplus
cparata 1:5859badee052 162 }
cparata 0:128dae13c732 163 #endif
cparata 0:128dae13c732 164
cparata 0:128dae13c732 165 #endif