ST
Example of pedometer for LSM6DSL in X-NUCLEO-IKS01A2
Dependencies: X_NUCLEO_IKS01A2 mbed
Fork of
Pedometer_IKS01A2
by 
ST Expansion SW Team
Pedometer Demo Application based on sensor expansion board X-NUCLEO-IKS01A2
Main function is to show how to count steps using the sensor expansion board and send a notification using UART to a connected PC or Desktop and display it on terminal applications like TeraTerm.
After connection has been established:
- the user can try to shake the board to simulate the steps and then view the notification using an hyper terminal. When a new step is detected, the LED is switched on for a while.
- the user button can be used to reset the step counter.
Diff: X_NUCLEO_IKS01A2/Components/LSM6DSLSensor/LSM6DSL_ACC_GYRO_driver.c
- Revision:
- 1:f6c2b912f1c4
- Parent:
- 0:b189540a70e2
- Child:
- 2:67af0ad3ea2e
--- a/X_NUCLEO_IKS01A2/Components/LSM6DSLSensor/LSM6DSL_ACC_GYRO_driver.c Fri Aug 12 13:41:14 2016 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,6393 +0,0 @@
-/**
- ******************************************************************************
- * @file LSM6DSL_ACC_GYRO_driver.c
- * @author MEMS Application Team
- * @version V1.5
- * @date 17-May-2016
- * @brief LSM6DSL driver file
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "LSM6DSL_ACC_GYRO_driver.h"
-
-/* Imported function prototypes ----------------------------------------------*/
-extern uint8_t LSM6DSL_IO_Write(void *handle, uint8_t WriteAddr, uint8_t *pBuffer, uint16_t nBytesToWrite);
-extern uint8_t LSM6DSL_IO_Read(void *handle, uint8_t ReadAddr, uint8_t *pBuffer, uint16_t nBytesToRead);
-
-/* Private typedef -----------------------------------------------------------*/
-
-/* Private define ------------------------------------------------------------*/
-
-/* Private macro -------------------------------------------------------------*/
-
-/* Private variables ---------------------------------------------------------*/
-
-/* Private functions ---------------------------------------------------------*/
-
-/* Exported functions ---------------------------------------------------------*/
-
-/************** Generic Function *******************/
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_ReadReg
-* Description : Generic Reading function. It must be fullfilled with either
-* : I2C or SPI reading functions
-* Input : Register Address, length of buffer
-* Output : Data REad
-* Return : None
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_ReadReg(void *handle, u8_t Reg, u8_t* Data, u16_t len)
-{
- if (LSM6DSL_IO_Read(handle, Reg, Data, len))
- {
- return MEMS_ERROR;
- }
- else
- {
- return MEMS_SUCCESS;
- }
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_WriteReg
-* Description : Generic Writing function. It must be fullfilled with either
-* : I2C or SPI writing function
-* Input : Register Address, Data to be written, length of buffer
-* Output : None
-* Return : None
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_WriteReg(void *handle, u8_t Reg, u8_t *Data, u16_t len)
-{
- if (LSM6DSL_IO_Write(handle, Reg, Data, len))
- {
- return MEMS_ERROR;
- }
- else
- {
- return MEMS_SUCCESS;
- }
-}
-
-/**************** Base Function *******************/
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WHO_AM_I
-* Description : Read WHO_AM_I_BIT
-* Input : Pointer to u8_t
-* Output : Status of WHO_AM_I_BIT
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WHO_AM_I(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WHO_AM_I_REG, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_WHO_AM_I_BIT_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_WHO_AM_I_BIT_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_BDU
-* Description : Write BDU
-* Input : LSM6DSL_ACC_GYRO_BDU_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_BDU(void *handle, LSM6DSL_ACC_GYRO_BDU_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_BDU_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_BDU
-* Description : Read BDU
-* Input : Pointer to LSM6DSL_ACC_GYRO_BDU_t
-* Output : Status of BDU see LSM6DSL_ACC_GYRO_BDU_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_BDU(void *handle, LSM6DSL_ACC_GYRO_BDU_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_BDU_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FS_XL
-* Description : Write FS_XL
-* Input : LSM6DSL_ACC_GYRO_FS_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FS_XL(void *handle, LSM6DSL_ACC_GYRO_FS_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FS_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FS_XL
-* Description : Read FS_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_FS_XL_t
-* Output : Status of FS_XL see LSM6DSL_ACC_GYRO_FS_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FS_XL(void *handle, LSM6DSL_ACC_GYRO_FS_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FS_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_GYRO_GetRawAccData(u8_t *buff)
-* Description : Read GetAccData output register
-* Input : pointer to [u8_t]
-* Output : GetAccData buffer u8_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_GetRawAccData(void *handle, u8_t *buff)
-{
- u8_t i, j, k;
- u8_t numberOfByteForDimension;
-
- numberOfByteForDimension=6/3;
-
- k=0;
- for (i=0; i<3;i++ )
- {
- for (j=0; j<numberOfByteForDimension;j++ )
- {
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_OUTX_L_XL+k, &buff[k], 1))
- return MEMS_ERROR;
- k++;
- }
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_Get_Acceleration(void *handle, int *buff, u8_t from_fifo)
-* Description : Read GetAccData output register
-* Input : pointer to [u8_t]
-* Output : values are expressed in mg
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-/*
- * Following is the table of sensitivity values for each case.
- * Values are expressed in ug/digit.
- */
-static const long long LSM6DSL_ACC_Sensitivity_List[4] = {
- 61, /* FS @2g */
- 122, /* FS @4g */
- 244, /* FS @8g */
- 488, /* FS @16g */
-};
-status_t LSM6DSL_ACC_Get_Acceleration(void *handle, int *buff, u8_t from_fifo)
-{
- LSM6DSL_ACC_GYRO_FS_XL_t fs;
- long long sensitivity = 0;
- Type3Axis16bit_U raw_data_tmp;
-
- /* Read out current odr, fs, hf setting */
- LSM6DSL_ACC_GYRO_R_FS_XL(handle, &fs);
-
- /* Determine the sensitivity according to fs */
- switch(fs) {
- case LSM6DSL_ACC_GYRO_FS_XL_2g:
- sensitivity = LSM6DSL_ACC_Sensitivity_List[0];
- break;
-
- case LSM6DSL_ACC_GYRO_FS_XL_4g:
- sensitivity = LSM6DSL_ACC_Sensitivity_List[1];
- break;
-
- case LSM6DSL_ACC_GYRO_FS_XL_8g:
- sensitivity = LSM6DSL_ACC_Sensitivity_List[2];
- break;
-
- case LSM6DSL_ACC_GYRO_FS_XL_16g:
- sensitivity = LSM6DSL_ACC_Sensitivity_List[3];
- break;
- }
-
- /* Read out raw accelerometer samples */
- if (from_fifo) {
- u8_t i;
-
- /* read all 3 axis from FIFO */
- for(i = 0; i < 3; i++)
- LSM6DSL_ACC_GYRO_Get_GetFIFOData(handle, raw_data_tmp.u8bit + 2*i);
- } else
- LSM6DSL_ACC_GYRO_GetRawAccData(handle, raw_data_tmp.u8bit);
-
- /* Apply proper shift and sensitivity */
- buff[0] = (raw_data_tmp.i16bit[0] * sensitivity + 500)/1000;
- buff[1] = (raw_data_tmp.i16bit[1] * sensitivity + 500)/1000;
- buff[2] = (raw_data_tmp.i16bit[2] * sensitivity + 500)/1000;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_ODR_XL
-* Description : Write ODR_XL
-* Input : LSM6DSL_ACC_GYRO_ODR_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_ODR_XL(void *handle, LSM6DSL_ACC_GYRO_ODR_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_ODR_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_ODR_XL
-* Description : Read ODR_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_ODR_XL_t
-* Output : Status of ODR_XL see LSM6DSL_ACC_GYRO_ODR_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_ODR_XL(void *handle, LSM6DSL_ACC_GYRO_ODR_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_ODR_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_translate_ODR_XL
-* Description : Read ODR_XL
-* Input : LSM6DSL_ACC_GYRO_ODR_XL_t
-* Output : The ODR value in Hz
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_translate_ODR_XL(LSM6DSL_ACC_GYRO_ODR_XL_t value, u16_t *odr_hz_val)
-{
- switch(value) {
- case LSM6DSL_ACC_GYRO_ODR_XL_POWER_DOWN:
- *odr_hz_val = 0;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_13Hz:
- *odr_hz_val = 13;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_26Hz:
- *odr_hz_val = 26;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_52Hz:
- *odr_hz_val = 52;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_104Hz:
- *odr_hz_val = 104;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_208Hz:
- *odr_hz_val = 208;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_416Hz:
- *odr_hz_val = 416;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_833Hz:
- *odr_hz_val = 833;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_XL_1660Hz:
- *odr_hz_val = 1660;
- break;
-
- default:
- return MEMS_ERROR;
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FS_G
-* Description : Write FS_G
-* Input : LSM6DSL_ACC_GYRO_FS_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FS_G(void *handle, LSM6DSL_ACC_GYRO_FS_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FS_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FS_G
-* Description : Read FS_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_FS_G_t
-* Output : Status of FS_G see LSM6DSL_ACC_GYRO_FS_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FS_G(void *handle, LSM6DSL_ACC_GYRO_FS_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FS_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_GYRO_GetRawGyroData(u8_t *buff)
-* Description : Read GetGyroData output register
-* Input : pointer to [u8_t]
-* Output : GetGyroData buffer u8_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_GetRawGyroData(void *handle, u8_t *buff)
-{
- u8_t i, j, k;
- u8_t numberOfByteForDimension;
-
- numberOfByteForDimension=6/3;
-
- k=0;
- for (i=0; i<3;i++ )
- {
- for (j=0; j<numberOfByteForDimension;j++ )
- {
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_OUTX_L_G+k, &buff[k], 1))
- return MEMS_ERROR;
- k++;
- }
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_Get_AngularRate(u8_t *buff)
-* Description : Read GetGyroData output register
-* Input : pointer to [u8_t]
-* Output : Returned values are espressed in mdps
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-/*
- * Following is the table of sensitivity values for each case.
- * Values are espressed in udps/digit.
- */
-static const long long LSM6DSL_GYRO_Sensitivity_List[5] = {
- 4375, /* FS @125 */
- 8750, /* FS @245 */
- 17500, /* FS @500 */
- 35000, /* FS @1000 */
- 70000, /* FS @2000 */
-};
-status_t LSM6DSL_ACC_Get_AngularRate(void *handle, int *buff, u8_t from_fifo)
-{
- LSM6DSL_ACC_GYRO_FS_125_t fs_125;
- LSM6DSL_ACC_GYRO_FS_G_t fs;
- long long sensitivity = 0;
- Type3Axis16bit_U raw_data_tmp;
-
- /* Read out current odr, fs, hf setting */
- LSM6DSL_ACC_GYRO_R_FS_125(handle, &fs_125);
- if (fs_125 == LSM6DSL_ACC_GYRO_FS_125_ENABLED) {
- sensitivity = LSM6DSL_GYRO_Sensitivity_List[0];
- } else {
- LSM6DSL_ACC_GYRO_R_FS_G(handle, &fs);
-
- /* Determine the sensitivity according to fs */
- switch(fs) {
- case LSM6DSL_ACC_GYRO_FS_G_245dps:
- sensitivity = LSM6DSL_GYRO_Sensitivity_List[1];
- break;
-
- case LSM6DSL_ACC_GYRO_FS_G_500dps:
- sensitivity = LSM6DSL_GYRO_Sensitivity_List[2];
- break;
-
- case LSM6DSL_ACC_GYRO_FS_G_1000dps:
- sensitivity = LSM6DSL_GYRO_Sensitivity_List[3];
- break;
-
- case LSM6DSL_ACC_GYRO_FS_G_2000dps:
- sensitivity = LSM6DSL_GYRO_Sensitivity_List[4];
- break;
- }
- }
-
- /* Read out raw accelerometer samples */
- if (from_fifo) {
- u8_t i;
-
- /* read all 3 axis from FIFO */
- for(i = 0; i < 3; i++)
- LSM6DSL_ACC_GYRO_Get_GetFIFOData(handle, raw_data_tmp.u8bit + 2*i);
- } else
- LSM6DSL_ACC_GYRO_GetRawGyroData(handle, raw_data_tmp.u8bit);
-
- /* Apply proper shift and sensitivity */
- buff[0] = (raw_data_tmp.i16bit[0] * sensitivity + 500)/1000;
- buff[1] = (raw_data_tmp.i16bit[1] * sensitivity + 500)/1000;
- buff[2] = (raw_data_tmp.i16bit[2] * sensitivity + 500)/1000;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_ODR_G
-* Description : Write ODR_G
-* Input : LSM6DSL_ACC_GYRO_ODR_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_ODR_G(void *handle, LSM6DSL_ACC_GYRO_ODR_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_ODR_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_ODR_G
-* Description : Read ODR_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_ODR_G_t
-* Output : Status of ODR_G see LSM6DSL_ACC_GYRO_ODR_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_ODR_G(void *handle, LSM6DSL_ACC_GYRO_ODR_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_ODR_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_translate_ODR_G
-* Description : Read ODR_G
-* Input : LSM6DSL_ACC_GYRO_ODR_G_t
-* Output : The ODR value in Hz
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_translate_ODR_G(LSM6DSL_ACC_GYRO_ODR_G_t value, u16_t *odr_hz_val)
-{
- switch(value) {
- case LSM6DSL_ACC_GYRO_ODR_G_POWER_DOWN:
- *odr_hz_val = 0;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_13Hz:
- *odr_hz_val = 13;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_26Hz:
- *odr_hz_val = 26;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_52Hz:
- *odr_hz_val = 52;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_104Hz:
- *odr_hz_val = 104;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_208Hz:
- *odr_hz_val = 208;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_416Hz:
- *odr_hz_val = 416;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_833Hz:
- *odr_hz_val = 833;
- break;
-
- case LSM6DSL_ACC_GYRO_ODR_G_1660Hz:
- *odr_hz_val = 1660;
- break;
-
- default:
- return MEMS_ERROR;
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FS_125
-* Description : Write FS_125
-* Input : LSM6DSL_ACC_GYRO_FS_125_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FS_125(void *handle, LSM6DSL_ACC_GYRO_FS_125_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FS_125_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FS_125
-* Description : Read FS_125
-* Input : Pointer to LSM6DSL_ACC_GYRO_FS_125_t
-* Output : Status of FS_125 see LSM6DSL_ACC_GYRO_FS_125_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FS_125(void *handle, LSM6DSL_ACC_GYRO_FS_125_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL2_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FS_125_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/**************** Advanced Function *******************/
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_BW_SEL
-* Description : Write BW_SEL
-* Input : LSM6DSL_ACC_GYRO_BW_SEL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_BW_SEL(void *handle, LSM6DSL_ACC_GYRO_BW_SEL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_BW_SEL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_BW_SEL
-* Description : Read BW_SEL
-* Input : Pointer to LSM6DSL_ACC_GYRO_BW_SEL_t
-* Output : Status of BW_SEL see LSM6DSL_ACC_GYRO_BW_SEL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_BW_SEL(void *handle, LSM6DSL_ACC_GYRO_BW_SEL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL1_XL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_BW_SEL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_BLE
-* Description : Write BLE
-* Input : LSM6DSL_ACC_GYRO_BLE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_BLE(void *handle, LSM6DSL_ACC_GYRO_BLE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_BLE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_BLE
-* Description : Read BLE
-* Input : Pointer to LSM6DSL_ACC_GYRO_BLE_t
-* Output : Status of BLE see LSM6DSL_ACC_GYRO_BLE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_BLE(void *handle, LSM6DSL_ACC_GYRO_BLE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_BLE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_EmbeddedAccess
-* Description : Write EMB_ACC
-* Input : LSM6DSL_ACC_GYRO_EMB_ACC_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_EmbeddedAccess(void *handle, LSM6DSL_ACC_GYRO_EMB_ACC_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_CFG_ACCESS, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_EMB_ACC_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FUNC_CFG_ACCESS, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_EmbeddedAccess
-* Description : Read EMB_ACC
-* Input : Pointer to LSM6DSL_ACC_GYRO_EMB_ACC_t
-* Output : Status of EMB_ACC see LSM6DSL_ACC_GYRO_EMB_ACC_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_EmbeddedAccess(void *handle, LSM6DSL_ACC_GYRO_EMB_ACC_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_CFG_ACCESS, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_EMB_ACC_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SYNC_RES_RATIO
-* Description : Write RR
-* Input : LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SYNC_RES_RATIO(void *handle, LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_SENSOR_RES_RATIO, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SENSOR_RES_RATIO, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SYNC_RES_RATIO
-* Description : Read RR
-* Input : Pointer to LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_t
-* Output : Status of RR see LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SYNC_RES_RATIO(void *handle, LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_SENSOR_RES_RATIO, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SYNC_RES_RATIO_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_Stamping_Time_Frame
-* Description : Write TPH
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_Stamping_Time_Frame(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_TPH_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_TPH_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_SENSOR_SYNC_TIME, &value, 1) )
- return MEMS_ERROR;
-
- value &= (u8_t)~LSM6DSL_ACC_GYRO_TPH_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SENSOR_SYNC_TIME, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_Stamping_Time_Frame
-* Description : Read TPH
-* Input : Pointer to u8_t
-* Output : Status of TPH
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_Stamping_Time_Frame(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_SENSOR_SYNC_TIME, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TPH_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_TPH_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FIFO_Watermark
-* Description : Write WTM_FIFO
-* Input : u16_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FIFO_Watermark(void *handle, u16_t newValue)
-{
- u8_t valueH, valueL;
- u8_t value;
-
- valueL = newValue & 0xFF;
- valueH = (newValue >> 8) & 0xFF;
-
- /* Low part goes in FIFO_CTRL1 */
- valueL = valueL << LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL1_POSITION; //mask
- valueL &= LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL1_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL1, &value, 1) )
- return MEMS_ERROR;
-
- value &= (u8_t)~LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL1_MASK;
- value |= valueL;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL1, &value, 1) )
- return MEMS_ERROR;
-
- /* High part goes in FIFO_CTRL2 */
- valueH = valueH << LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL2_POSITION; //mask
- valueH &= LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL2_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL2_MASK;
- value |= valueH;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFO_Watermark
-* Description : Read WTM_FIFO
-* Input : Pointer to u16_t
-* Output : Status of WTM_FIFO
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFO_Watermark(void *handle, u16_t *value)
-{
- u8_t valueH, valueL;
-
- /* Low part from FIFO_CTRL1 */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL1, (u8_t *)&valueL, 1) )
- return MEMS_ERROR;
-
- valueL &= LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL1_MASK; //coerce
- valueL = valueL >> LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL1_POSITION; //mask
-
- /* High part from FIFO_CTRL2 */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, (u8_t *)&valueH, 1) )
- return MEMS_ERROR;
-
- valueH &= LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL2_MASK; //coerce
- valueH = valueH >> LSM6DSL_ACC_GYRO_WTM_FIFO_CTRL2_POSITION; //mask
-
- *value = ((valueH << 8) & 0xFF00) | valueL;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FIFO_TEMP
-* Description : Write FIFO_TEMP_EN
-* Input : LSM6DSL_ACC_GYRO_FIFO_TEMP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FIFO_TEMP(void *handle, LSM6DSL_ACC_GYRO_FIFO_TEMP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FIFO_TEMP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFO_TEMP
-* Description : Read FIFO_TEMP_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_FIFO_TEMP_t
-* Output : Status of FIFO_TEMP_EN see LSM6DSL_ACC_GYRO_FIFO_TEMP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFO_TEMP(void *handle, LSM6DSL_ACC_GYRO_FIFO_TEMP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FIFO_TEMP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TIM_PEDO_FIFO_Write_En
-* Description : Write TIM_PEDO_FIFO_DRDY
-* Input : LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TIM_PEDO_FIFO_Write_En(void *handle, LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TIM_PEDO_FIFO_Write_En
-* Description : Read TIM_PEDO_FIFO_DRDY
-* Input : Pointer to LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_t
-* Output : Status of TIM_PEDO_FIFO_DRDY see LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TIM_PEDO_FIFO_Write_En(void *handle, LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_DRDY_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TIM_PEDO_FIFO_En
-* Description : Write TIM_PEDO_FIFO_EN
-* Input : LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TIM_PEDO_FIFO_En(void *handle, LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TIM_PEDO_FIFO_En
-* Description : Read TIM_PEDO_FIFO_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_t
-* Output : Status of TIM_PEDO_FIFO_EN see LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TIM_PEDO_FIFO_En(void *handle, LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TIM_PEDO_FIFO_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL
-* Description : Write DEC_FIFO_XL
-* Input : LSM6DSL_ACC_GYRO_DEC_FIFO_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL3, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEC_FIFO_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL3, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL_val
-* Description : Write DEC_FIFO_XL
-* Input : u16_t
-* Output : Program XL decimation value from unsigned short
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL_val(void *handle, u16_t newValue)
-{
- switch(newValue) {
- case 0:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DATA_NOT_IN_FIFO);
- break;
-
- case 1:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_NO_DECIMATION);
- break;
-
- case 2:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DECIMATION_BY_2);
- break;
-
- case 3:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DECIMATION_BY_3);
- break;
-
- case 4:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DECIMATION_BY_4);
- break;
-
- case 8:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DECIMATION_BY_8);
- break;
-
- case 16:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DECIMATION_BY_16);
- break;
-
- case 32:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_XL(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_DECIMATION_BY_32);
- break;
-
- default:
- return MEMS_ERROR;
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEC_FIFO_XL
-* Description : Read DEC_FIFO_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEC_FIFO_XL_t
-* Output : Status of DEC_FIFO_XL see LSM6DSL_ACC_GYRO_DEC_FIFO_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEC_FIFO_XL(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL3, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEC_FIFO_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEC_FIFO_G
-* Description : Write DEC_FIFO_G
-* Input : LSM6DSL_ACC_GYRO_DEC_FIFO_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL3, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEC_FIFO_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL3, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEC_FIFO_G_val
-* Description : Write DEC_FIFO_G
-* Input : u16_t
-* Output : Program G decimation value from unsigned short
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEC_FIFO_G_val(void *handle, u16_t newValue)
-{
- switch(newValue) {
- case 0:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DATA_NOT_IN_FIFO);
- break;
-
- case 1:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_NO_DECIMATION);
- break;
-
- case 2:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DECIMATION_BY_2);
- break;
-
- case 3:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DECIMATION_BY_3);
- break;
-
- case 4:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DECIMATION_BY_4);
- break;
-
- case 8:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DECIMATION_BY_8);
- break;
-
- case 16:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DECIMATION_BY_16);
- break;
-
- case 32:
- LSM6DSL_ACC_GYRO_W_DEC_FIFO_G(handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_DECIMATION_BY_32);
- break;
-
- default:
- return MEMS_ERROR;
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEC_FIFO_G
-* Description : Read DEC_FIFO_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEC_FIFO_G_t
-* Output : Status of DEC_FIFO_G see LSM6DSL_ACC_GYRO_DEC_FIFO_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEC_FIFO_G(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL3, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEC_FIFO_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEC_FIFO_DS3
-* Description : Write DEC_DS3_FIFO
-* Input : LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEC_FIFO_DS3(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEC_FIFO_DS3
-* Description : Read DEC_DS3_FIFO
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_t
-* Output : Status of DEC_DS3_FIFO see LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEC_FIFO_DS3(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEC_FIFO_DS3_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEC_FIFO_DS4
-* Description : Write DEC_DS4_FIFO
-* Input : LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEC_FIFO_DS4(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEC_FIFO_DS4
-* Description : Read DEC_DS4_FIFO
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_t
-* Output : Status of DEC_DS4_FIFO see LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEC_FIFO_DS4(void *handle, LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEC_FIFO_DS4_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HI_DATA_ONLY
-* Description : Write HI_DATA_ONLY
-* Input : LSM6DSL_ACC_GYRO_HI_DATA_ONLY_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HI_DATA_ONLY(void *handle, LSM6DSL_ACC_GYRO_HI_DATA_ONLY_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HI_DATA_ONLY_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HI_DATA_ONLY
-* Description : Read HI_DATA_ONLY
-* Input : Pointer to LSM6DSL_ACC_GYRO_HI_DATA_ONLY_t
-* Output : Status of HI_DATA_ONLY see LSM6DSL_ACC_GYRO_HI_DATA_ONLY_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HI_DATA_ONLY(void *handle, LSM6DSL_ACC_GYRO_HI_DATA_ONLY_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HI_DATA_ONLY_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_STOP_ON_FTH
-* Description : Write STOP_ON_FTH
-* Input : LSM6DSL_ACC_GYRO_STOP_ON_FTH_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_STOP_ON_FTH(void *handle, LSM6DSL_ACC_GYRO_STOP_ON_FTH_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_STOP_ON_FTH_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_STOP_ON_FTH
-* Description : Read STOP_ON_FTH
-* Input : Pointer to LSM6DSL_ACC_GYRO_STOP_ON_FTH_t
-* Output : Status of STOP_ON_FTH see LSM6DSL_ACC_GYRO_STOP_ON_FTH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_STOP_ON_FTH(void *handle, LSM6DSL_ACC_GYRO_STOP_ON_FTH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL4, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_STOP_ON_FTH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FIFO_MODE
-* Description : Write FIFO_MODE
-* Input : LSM6DSL_ACC_GYRO_FIFO_MODE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FIFO_MODE(void *handle, LSM6DSL_ACC_GYRO_FIFO_MODE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL5, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FIFO_MODE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL5, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFO_MODE
-* Description : Read FIFO_MODE
-* Input : Pointer to LSM6DSL_ACC_GYRO_FIFO_MODE_t
-* Output : Status of FIFO_MODE see LSM6DSL_ACC_GYRO_FIFO_MODE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFO_MODE(void *handle, LSM6DSL_ACC_GYRO_FIFO_MODE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL5, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FIFO_MODE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_ODR_FIFO
-* Description : Write ODR_FIFO
-* Input : LSM6DSL_ACC_GYRO_ODR_FIFO_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_ODR_FIFO(void *handle, LSM6DSL_ACC_GYRO_ODR_FIFO_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL5, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_ODR_FIFO_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL5, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_ODR_FIFO
-* Description : Read ODR_FIFO
-* Input : Pointer to LSM6DSL_ACC_GYRO_ODR_FIFO_t
-* Output : Status of ODR_FIFO see LSM6DSL_ACC_GYRO_ODR_FIFO_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_ODR_FIFO(void *handle, LSM6DSL_ACC_GYRO_ODR_FIFO_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_CTRL5, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_ODR_FIFO_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_PULSE
-* Description : Write DRDY_PULSE
-* Input : LSM6DSL_ACC_GYRO_DRDY_PULSE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_PULSE(void *handle, LSM6DSL_ACC_GYRO_DRDY_PULSE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_DRDY_PULSE_CFG_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DRDY_PULSE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_DRDY_PULSE_CFG_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_PULSE
-* Description : Read DRDY_PULSE
-* Input : Pointer to LSM6DSL_ACC_GYRO_DRDY_PULSE_t
-* Output : Status of DRDY_PULSE see LSM6DSL_ACC_GYRO_DRDY_PULSE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_PULSE(void *handle, LSM6DSL_ACC_GYRO_DRDY_PULSE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_DRDY_PULSE_CFG_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DRDY_PULSE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_XL_on_INT1
-* Description : Write INT1_DRDY_XL
-* Input : LSM6DSL_ACC_GYRO_INT1_DRDY_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_XL_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_DRDY_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_DRDY_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_XL_on_INT1
-* Description : Read INT1_DRDY_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_DRDY_XL_t
-* Output : Status of INT1_DRDY_XL see LSM6DSL_ACC_GYRO_INT1_DRDY_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_XL_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_DRDY_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_DRDY_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_G_on_INT1
-* Description : Write INT1_DRDY_G
-* Input : LSM6DSL_ACC_GYRO_INT1_DRDY_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_G_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_DRDY_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_DRDY_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_G_on_INT1
-* Description : Read INT1_DRDY_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_DRDY_G_t
-* Output : Status of INT1_DRDY_G see LSM6DSL_ACC_GYRO_INT1_DRDY_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_G_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_DRDY_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_DRDY_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_BOOT_on_INT1
-* Description : Write INT1_BOOT
-* Input : LSM6DSL_ACC_GYRO_INT1_BOOT_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_BOOT_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_BOOT_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_BOOT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_BOOT_on_INT1
-* Description : Read INT1_BOOT
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_BOOT_t
-* Output : Status of INT1_BOOT see LSM6DSL_ACC_GYRO_INT1_BOOT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_BOOT_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_BOOT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_BOOT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FIFO_TSHLD_on_INT1
-* Description : Write INT1_FTH
-* Input : LSM6DSL_ACC_GYRO_INT1_FTH_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FIFO_TSHLD_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_FTH_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_FTH_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFO_TSHLD_on_INT1
-* Description : Read INT1_FTH
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_FTH_t
-* Output : Status of INT1_FTH see LSM6DSL_ACC_GYRO_INT1_FTH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFO_TSHLD_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_FTH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_FTH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_OVERRUN_on_INT1
-* Description : Write INT1_OVR
-* Input : LSM6DSL_ACC_GYRO_INT1_OVR_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_OVERRUN_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_OVR_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_OVR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_OVERRUN_on_INT1
-* Description : Read INT1_OVR
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_OVR_t
-* Output : Status of INT1_OVR see LSM6DSL_ACC_GYRO_INT1_OVR_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_OVERRUN_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_OVR_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_OVR_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FULL_FLAG_on_INT1
-* Description : Write INT1_FULL_FLAG
-* Input : LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FULL_FLAG_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FULL_FLAG_on_INT1
-* Description : Read INT1_FULL_FLAG
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_t
-* Output : Status of INT1_FULL_FLAG see LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FULL_FLAG_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_FULL_FLAG_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SIGN_MOT_on_INT1
-* Description : Write INT1_SIGN_MOT
-* Input : LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SIGN_MOT_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SIGN_MOT_on_INT1
-* Description : Read INT1_SIGN_MOT
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_t
-* Output : Status of INT1_SIGN_MOT see LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SIGN_MOT_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_SIGN_MOT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_STEP_DET_on_INT1
-* Description : Write INT1_PEDO
-* Input : LSM6DSL_ACC_GYRO_INT1_PEDO_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_STEP_DET_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_PEDO_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_PEDO_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_STEP_DET_on_INT1
-* Description : Read INT1_PEDO
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_PEDO_t
-* Output : Status of INT1_PEDO see LSM6DSL_ACC_GYRO_INT1_PEDO_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_STEP_DET_on_INT1(void *handle, LSM6DSL_ACC_GYRO_INT1_PEDO_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT1_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_PEDO_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_XL_on_INT2
-* Description : Write INT2_DRDY_XL
-* Input : LSM6DSL_ACC_GYRO_INT2_DRDY_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_XL_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_DRDY_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_DRDY_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_XL_on_INT2
-* Description : Read INT2_DRDY_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_DRDY_XL_t
-* Output : Status of INT2_DRDY_XL see LSM6DSL_ACC_GYRO_INT2_DRDY_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_XL_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_DRDY_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_DRDY_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_G_on_INT2
-* Description : Write INT2_DRDY_G
-* Input : LSM6DSL_ACC_GYRO_INT2_DRDY_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_G_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_DRDY_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_DRDY_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_G_on_INT2
-* Description : Read INT2_DRDY_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_DRDY_G_t
-* Output : Status of INT2_DRDY_G see LSM6DSL_ACC_GYRO_INT2_DRDY_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_G_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_DRDY_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_DRDY_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_TEMP_on_INT2
-* Description : Write INT2_DRDY_TEMP
-* Input : LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_TEMP_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_TEMP_on_INT2
-* Description : Read INT2_DRDY_TEMP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_t
-* Output : Status of INT2_DRDY_TEMP see LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_TEMP_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_DRDY_TEMP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FIFO_TSHLD_on_INT2
-* Description : Write INT2_FTH
-* Input : LSM6DSL_ACC_GYRO_INT2_FTH_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FIFO_TSHLD_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_FTH_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_FTH_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFO_TSHLD_on_INT2
-* Description : Read INT2_FTH
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_FTH_t
-* Output : Status of INT2_FTH see LSM6DSL_ACC_GYRO_INT2_FTH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFO_TSHLD_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_FTH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_FTH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_OVERRUN_on_INT2
-* Description : Write INT2_OVR
-* Input : LSM6DSL_ACC_GYRO_INT2_OVR_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_OVERRUN_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_OVR_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_OVR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_OVERRUN_on_INT2
-* Description : Read INT2_OVR
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_OVR_t
-* Output : Status of INT2_OVR see LSM6DSL_ACC_GYRO_INT2_OVR_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_OVERRUN_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_OVR_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_OVR_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FULL_FLAG_on_INT2
-* Description : Write INT2_FULL_FLAG
-* Input : LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FULL_FLAG_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FULL_FLAG_on_INT2
-* Description : Read INT2_FULL_FLAG
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_t
-* Output : Status of INT2_FULL_FLAG see LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FULL_FLAG_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_FULL_FLAG_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_STEP_COUNT_OV_on_INT2
-* Description : Write INT2_STEP_COUNT_OV
-* Input : LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_STEP_COUNT_OV_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_STEP_COUNT_OV_on_INT2
-* Description : Read INT2_STEP_COUNT_OV
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_t
-* Output : Status of INT2_STEP_COUNT_OV see LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_STEP_COUNT_OV_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_STEP_COUNT_OV_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_STEP_DELTA_on_INT2
-* Description : Write INT2_STEP_DELTA
-* Input : LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_STEP_DELTA_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_STEP_DELTA_on_INT2
-* Description : Read INT2_STEP_DELTA
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_t
-* Output : Status of INT2_STEP_DELTA see LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_STEP_DELTA_on_INT2(void *handle, LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT2_CTRL, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_STEP_DELTA_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SW_RESET
-* Description : Write SW_RESET
-* Input : LSM6DSL_ACC_GYRO_SW_RESET_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SW_RESET(void *handle, LSM6DSL_ACC_GYRO_SW_RESET_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SW_RESET_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SW_RESET
-* Description : Read SW_RESET
-* Input : Pointer to LSM6DSL_ACC_GYRO_SW_RESET_t
-* Output : Status of SW_RESET see LSM6DSL_ACC_GYRO_SW_RESET_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SW_RESET(void *handle, LSM6DSL_ACC_GYRO_SW_RESET_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SW_RESET_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_IF_Addr_Incr
-* Description : Write IF_INC
-* Input : LSM6DSL_ACC_GYRO_IF_INC_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_IF_Addr_Incr(void *handle, LSM6DSL_ACC_GYRO_IF_INC_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_IF_INC_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_IF_Addr_Incr
-* Description : Read IF_INC
-* Input : Pointer to LSM6DSL_ACC_GYRO_IF_INC_t
-* Output : Status of IF_INC see LSM6DSL_ACC_GYRO_IF_INC_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_IF_Addr_Incr(void *handle, LSM6DSL_ACC_GYRO_IF_INC_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_IF_INC_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SPI_Mode
-* Description : Write SIM
-* Input : LSM6DSL_ACC_GYRO_SIM_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SPI_Mode(void *handle, LSM6DSL_ACC_GYRO_SIM_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SIM_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SPI_Mode
-* Description : Read SIM
-* Input : Pointer to LSM6DSL_ACC_GYRO_SIM_t
-* Output : Status of SIM see LSM6DSL_ACC_GYRO_SIM_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SPI_Mode(void *handle, LSM6DSL_ACC_GYRO_SIM_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SIM_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_PadSel
-* Description : Write PP_OD
-* Input : LSM6DSL_ACC_GYRO_PP_OD_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_PadSel(void *handle, LSM6DSL_ACC_GYRO_PP_OD_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_PP_OD_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_PadSel
-* Description : Read PP_OD
-* Input : Pointer to LSM6DSL_ACC_GYRO_PP_OD_t
-* Output : Status of PP_OD see LSM6DSL_ACC_GYRO_PP_OD_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_PadSel(void *handle, LSM6DSL_ACC_GYRO_PP_OD_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_PP_OD_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_INT_ACT_LEVEL
-* Description : Write INT_ACT_LEVEL
-* Input : LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_INT_ACT_LEVEL(void *handle, LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_INT_ACT_LEVEL
-* Description : Read INT_ACT_LEVEL
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_t
-* Output : Status of INT_ACT_LEVEL see LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_INT_ACT_LEVEL(void *handle, LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT_ACT_LEVEL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_BOOT
-* Description : Write BOOT
-* Input : LSM6DSL_ACC_GYRO_BOOT_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_BOOT(void *handle, LSM6DSL_ACC_GYRO_BOOT_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_BOOT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_BOOT
-* Description : Read BOOT
-* Input : Pointer to LSM6DSL_ACC_GYRO_BOOT_t
-* Output : Status of BOOT see LSM6DSL_ACC_GYRO_BOOT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_BOOT(void *handle, LSM6DSL_ACC_GYRO_BOOT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL3_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_BOOT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_LPF1_SEL_G
-* Description : Write LPF1_SEL_G
-* Input : LSM6DSL_ACC_GYRO_LPF1_SEL_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LPF1_SEL_G(void *handle, LSM6DSL_ACC_GYRO_LPF1_SEL_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LPF1_SEL_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_LPF1_SEL_G
-* Description : Read LPF1_SEL_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_LPF1_SEL_G_t
-* Output : Status of LPF1_SEL_G see LSM6DSL_ACC_GYRO_LPF1_SEL_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LPF1_SEL_G(void *handle, LSM6DSL_ACC_GYRO_LPF1_SEL_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LPF1_SEL_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_I2C_DISABLE
-* Description : Write I2C_DISABLE
-* Input : LSM6DSL_ACC_GYRO_I2C_DISABLE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_I2C_DISABLE(void *handle, LSM6DSL_ACC_GYRO_I2C_DISABLE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_I2C_DISABLE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_I2C_DISABLE
-* Description : Read I2C_DISABLE
-* Input : Pointer to LSM6DSL_ACC_GYRO_I2C_DISABLE_t
-* Output : Status of I2C_DISABLE see LSM6DSL_ACC_GYRO_I2C_DISABLE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_I2C_DISABLE(void *handle, LSM6DSL_ACC_GYRO_I2C_DISABLE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_I2C_DISABLE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_MSK
-* Description : Write DRDY_MSK
-* Input : LSM6DSL_ACC_GYRO_DRDY_MSK_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_MSK(void *handle, LSM6DSL_ACC_GYRO_DRDY_MSK_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DRDY_MSK_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_MSK
-* Description : Read DRDY_MSK
-* Input : Pointer to LSM6DSL_ACC_GYRO_DRDY_MSK_t
-* Output : Status of DRDY_MSK see LSM6DSL_ACC_GYRO_DRDY_MSK_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_MSK(void *handle, LSM6DSL_ACC_GYRO_DRDY_MSK_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DRDY_MSK_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_INT2_ON_INT1
-* Description : Write INT2_ON_INT1
-* Input : LSM6DSL_ACC_GYRO_INT2_ON_INT1_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_INT2_ON_INT1(void *handle, LSM6DSL_ACC_GYRO_INT2_ON_INT1_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_ON_INT1_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_INT2_ON_INT1
-* Description : Read INT2_ON_INT1
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_ON_INT1_t
-* Output : Status of INT2_ON_INT1 see LSM6DSL_ACC_GYRO_INT2_ON_INT1_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_INT2_ON_INT1(void *handle, LSM6DSL_ACC_GYRO_INT2_ON_INT1_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_ON_INT1_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SleepMode_G
-* Description : Write SLEEP_G
-* Input : LSM6DSL_ACC_GYRO_SLEEP_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SleepMode_G(void *handle, LSM6DSL_ACC_GYRO_SLEEP_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SLEEP_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SleepMode_G
-* Description : Read SLEEP_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_SLEEP_G_t
-* Output : Status of SLEEP_G see LSM6DSL_ACC_GYRO_SLEEP_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SleepMode_G(void *handle, LSM6DSL_ACC_GYRO_SLEEP_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL4_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SLEEP_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SelfTest_XL
-* Description : Write ST_XL
-* Input : LSM6DSL_ACC_GYRO_ST_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SelfTest_XL(void *handle, LSM6DSL_ACC_GYRO_ST_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_ST_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SelfTest_XL
-* Description : Read ST_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_ST_XL_t
-* Output : Status of ST_XL see LSM6DSL_ACC_GYRO_ST_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SelfTest_XL(void *handle, LSM6DSL_ACC_GYRO_ST_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_ST_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SelfTest_G
-* Description : Write ST_G
-* Input : LSM6DSL_ACC_GYRO_ST_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SelfTest_G(void *handle, LSM6DSL_ACC_GYRO_ST_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_ST_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SelfTest_G
-* Description : Read ST_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_ST_G_t
-* Output : Status of ST_G see LSM6DSL_ACC_GYRO_ST_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SelfTest_G(void *handle, LSM6DSL_ACC_GYRO_ST_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_ST_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEN_Polarity
-* Description : Write DEN_LH
-* Input : LSM6DSL_ACC_GYRO_DEN_LH_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEN_Polarity(void *handle, LSM6DSL_ACC_GYRO_DEN_LH_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEN_LH_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEN_Polarity
-* Description : Read DEN_LH
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEN_LH_t
-* Output : Status of DEN_LH see LSM6DSL_ACC_GYRO_DEN_LH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEN_Polarity(void *handle, LSM6DSL_ACC_GYRO_DEN_LH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEN_LH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_CircularBurstMode
-* Description : Write ST_ROUNDING
-* Input : LSM6DSL_ACC_GYRO_ROUNDING_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_CircularBurstMode(void *handle, LSM6DSL_ACC_GYRO_ROUNDING_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LSM6DSL_ACC_GYRO_ROUNDING_t_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_CircularBurstMode
-* Description : Read ST_ROUNDING
-* Input : Pointer to LSM6DSL_ACC_GYRO_ROUNDING_t
-* Output : Status of ST_ROUNDING see LSM6DSL_ACC_GYRO_ROUNDING_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_CircularBurstMode(void *handle, LSM6DSL_ACC_GYRO_ROUNDING_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL5_C, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LSM6DSL_ACC_GYRO_ROUNDING_t_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_LP_BW_G
-* Description : Write FTYPE
-* Input : LSM6DSL_ACC_GYRO_FTYPE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LP_BW_G(void *handle, LSM6DSL_ACC_GYRO_FTYPE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FTYPE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_LP_BW_G
-* Description : Read FTYPE
-* Input : Pointer to LSM6DSL_ACC_GYRO_FTYPE_t
-* Output : Status of FTYPE see LSM6DSL_ACC_GYRO_FTYPE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LP_BW_G(void *handle, LSM6DSL_ACC_GYRO_FTYPE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FTYPE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_UserOffsetWeight
-* Description : Write USR_OFF_W
-* Input : LSM6DSL_ACC_GYRO_USR_OFF_W_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_UserOffsetWeight(void *handle, LSM6DSL_ACC_GYRO_USR_OFF_W_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_USR_OFF_W_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_UserOffsetWeight
-* Description : Read USR_OFF_W
-* Input : Pointer to LSM6DSL_ACC_GYRO_USR_OFF_W_t
-* Output : Status of USR_OFF_W see LSM6DSL_ACC_GYRO_USR_OFF_W_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_UserOffsetWeight(void *handle, LSM6DSL_ACC_GYRO_USR_OFF_W_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_USR_OFF_W_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_LowPower_XL
-* Description : Write LP_XL
-* Input : LSM6DSL_ACC_GYRO_LP_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LowPower_XL(void *handle, LSM6DSL_ACC_GYRO_LP_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LP_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_LowPower_XL
-* Description : Read LP_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_LP_XL_t
-* Output : Status of LP_XL see LSM6DSL_ACC_GYRO_LP_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LowPower_XL(void *handle, LSM6DSL_ACC_GYRO_LP_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LP_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEN_LVL2_EN
-* Description : Write DEN_LVL2_EN
-* Input : LSM6DSL_ACC_GYRO_DEN_LVL2_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEN_LVL2_EN(void *handle, LSM6DSL_ACC_GYRO_DEN_LVL2_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEN_LVL2_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEN_LVL2_EN
-* Description : Read DEN_LVL2_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEN_LVL2_EN_t
-* Output : Status of DEN_LVL2_EN see LSM6DSL_ACC_GYRO_DEN_LVL2_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEN_LVL2_EN(void *handle, LSM6DSL_ACC_GYRO_DEN_LVL2_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEN_LVL2_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DEN_LVL_EN
-* Description : Write DEN_LVL_EN
-* Input : LSM6DSL_ACC_GYRO_DEN_LVL_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DEN_LVL_EN(void *handle, LSM6DSL_ACC_GYRO_DEN_LVL_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1))
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEN_LVL_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DEN_LVL_EN
-* Description : Read DEN_LVL_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEN_LVL_EN_t
-* Output : Status of DEN_LVL_EN see LSM6DSL_ACC_GYRO_DEN_LVL_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DEN_LVL_EN(void *handle, LSM6DSL_ACC_GYRO_DEN_LVL_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEN_LVL_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_ExternalTrigger
-* Description : Write DEN_EDGE_EN
-* Input : LSM6DSL_ACC_GYRO_DEN_EDGE_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_ExternalTrigger(void *handle, LSM6DSL_ACC_GYRO_DEN_EDGE_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DEN_EDGE_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_ExternalTrigger
-* Description : Read DEN_EDGE_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_DEN_EDGE_EN_t
-* Output : Status of DEN_EDGE_EN see LSM6DSL_ACC_GYRO_DEN_EDGE_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_ExternalTrigger(void *handle, LSM6DSL_ACC_GYRO_DEN_EDGE_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL6_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DEN_EDGE_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HPM_G
-* Description : Write HPM_G
-* Input : LSM6DSL_ACC_GYRO_HPM_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HPM_G(void *handle, LSM6DSL_ACC_GYRO_HPM_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HPM_G_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HPM_G
-* Description : Read HPM_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_HPM_G_t
-* Output : Status of HPM_G see LSM6DSL_ACC_GYRO_HPM_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HPM_G(void *handle, LSM6DSL_ACC_GYRO_HPM_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HPM_G_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_RoundingOnStatusRegisters
-* Description : Write HPM_G
-* Input : LSM6DSL_ACC_GYRO_RND_STATUS_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_RoundingOnStatusRegisters(void *handle, LSM6DSL_ACC_GYRO_RND_STATUS_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_RND_STATUS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_RoundingOnStatusRegisters
-* Description : Read HPM_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_RND_STATUS_t
-* Output : Status of HPM_G see LSM6DSL_ACC_GYRO_RND_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_RoundingOnStatusRegisters(void *handle, LSM6DSL_ACC_GYRO_RND_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, (u8_t *)value, 1))
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_RND_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HPFilter_En
-* Description : Write HP_EN
-* Input : LSM6DSL_ACC_GYRO_HP_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HPFilter_En(void *handle, LSM6DSL_ACC_GYRO_HP_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HP_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HPFilter_En
-* Description : Read HP_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_HP_EN_t
-* Output : Status of HP_EN see LSM6DSL_ACC_GYRO_HP_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HPFilter_En(void *handle, LSM6DSL_ACC_GYRO_HP_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HP_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_LP_Mode
-* Description : Write LP_EN
-* Input : LSM6DSL_ACC_GYRO_LP_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LP_Mode(void *handle, LSM6DSL_ACC_GYRO_LP_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LP_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_LP_Mode
-* Description : Read LP_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_LP_EN_t
-* Output : Status of LP_EN see LSM6DSL_ACC_GYRO_LP_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LP_Mode(void *handle, LSM6DSL_ACC_GYRO_LP_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LP_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_ROUNDING_STATUS
-* Description : Write ROUNDING_STATUS
-* Input : LSM6DSL_ACC_GYRO_ROUNDING_STATUS_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_ROUNDING_STATUS(void *handle, LSM6DSL_ACC_GYRO_ROUNDING_STATUS_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_ROUNDING_STATUS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_ROUNDING_STATUS
-* Description : Read ROUNDING_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_ROUNDING_STATUS_t
-* Output : Status of ROUNDING_STATUS see LSM6DSL_ACC_GYRO_ROUNDING_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_ROUNDING_STATUS(void *handle, LSM6DSL_ACC_GYRO_ROUNDING_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_ROUNDING_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HP_G_RST
-* Description : Write HP_G_RST
-* Input : LSM6DSL_ACC_GYRO_HP_G_RST_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HP_G_RST(void *handle, LSM6DSL_ACC_GYRO_HP_G_RST_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HP_G_RST_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HP_G_RST
-* Description : Read HP_G_RST
-* Input : Pointer to LSM6DSL_ACC_GYRO_HP_G_RST_t
-* Output : Status of HP_G_RST see LSM6DSL_ACC_GYRO_HP_G_RST_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HP_G_RST(void *handle, LSM6DSL_ACC_GYRO_HP_G_RST_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL7_G, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HP_G_RST_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_InComposit
-* Description : Write INPUT_COMPOSITE
-* Input : LSM6DSL_ACC_GYRO_IN_COMP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_InComposit(void *handle, LSM6DSL_ACC_GYRO_IN_COMP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_IN_COMP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_InComposit
-* Description : Read INPUT_COMPOSITE
-* Input : Pointer to LSM6DSL_ACC_GYRO_IN_COMP_t
-* Output : Status of INPUT_COMPOSITE see LSM6DSL_ACC_GYRO_IN_COMP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_InComposit(void *handle, LSM6DSL_ACC_GYRO_IN_COMP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_IN_COMP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HPfilterReference
-* Description : Write HP_REF_MODE
-* Input : LSM6DSL_ACC_GYRO_HP_REF_MODE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HPfilterReference(void *handle, LSM6DSL_ACC_GYRO_HP_REF_MODE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HP_REF_MODE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HPfilterReference
-* Description : Read HP_REF_MODE
-* Input : Pointer to LSM6DSL_ACC_GYRO_HP_REF_MODE_t
-* Output : Status of HP_REF_MODE see LSM6DSL_ACC_GYRO_HP_REF_MODE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HPfilterReference(void *handle, LSM6DSL_ACC_GYRO_HP_REF_MODE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HP_REF_MODE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HPCF_XL
-* Description : Write HPCF_XL
-* Input : LSM6DSL_ACC_GYRO_HPCF_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HPCF_XL(void *handle, LSM6DSL_ACC_GYRO_HPCF_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HPCF_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HPCF_XL
-* Description : Read HPCF_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_HPCF_XL_t
-* Output : Status of HPCF_XL see LSM6DSL_ACC_GYRO_HPCF_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HPCF_XL(void *handle, LSM6DSL_ACC_GYRO_HPCF_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HPCF_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_LowPassFiltSel_XL
-* Description : Write LPF2_XL_EN
-* Input : LSM6DSL_ACC_GYRO_LPF2_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LowPassFiltSel_XL(void *handle, LSM6DSL_ACC_GYRO_LPF2_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LPF2_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_LowPassFiltSel_XL
-* Description : Read LPF2_XL_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_LPF2_XL_t
-* Output : Status of LPF2_XL_EN see LSM6DSL_ACC_GYRO_LPF2_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LowPassFiltSel_XL(void *handle, LSM6DSL_ACC_GYRO_LPF2_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LPF2_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_LOW_PASS_ON_6D
-* Description : Write LOW_PASS_ON_6D
-* Input : LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LOW_PASS_ON_6D(void *handle, LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_LOW_PASS_ON_6D
-* Description : Read LOW_PASS_ON_6D
-* Input : Pointer to LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_t
-* Output : Status of LOW_PASS_ON_6D see LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LOW_PASS_ON_6D(void *handle, LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LOW_PASS_ON_6D_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_HP_SLOPE_XL
-* Description : Write HP_SLOPE_XL_EN
-* Input : LSM6DSL_ACC_GYRO_HP_SLOPE_XL_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_HP_SLOPE_XL(void *handle, LSM6DSL_ACC_GYRO_HP_SLOPE_XL_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_HP_SLOPE_XL_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HP_SLOPE_XL
-* Description : Read HP_SLOPE_XL_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_HP_SLOPE_XL_t
-* Output : Status of HP_SLOPE_XL_EN see LSM6DSL_ACC_GYRO_HP_SLOPE_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HP_SLOPE_XL(void *handle, LSM6DSL_ACC_GYRO_HP_SLOPE_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL8_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HP_SLOPE_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SOFT
-* Description : Write SOFT_EN
-* Input : LSM6DSL_ACC_GYRO_SOFT_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SOFT(void *handle, LSM6DSL_ACC_GYRO_SOFT_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL9_XL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SOFT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL9_XL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SOFT
-* Description : Read SOFT_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_SOFT_t
-* Output : Status of SOFT_EN see LSM6DSL_ACC_GYRO_SOFT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SOFT(void *handle, LSM6DSL_ACC_GYRO_SOFT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL9_XL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SOFT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SignifcantMotion
-* Description : Write SIGN_MOTION_EN
-* Input : LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SignifcantMotion(void *handle, LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SignifcantMotion
-* Description : Read SIGN_MOTION_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_t
-* Output : Status of SIGN_MOTION_EN see LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SignifcantMotion(void *handle, LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SIGN_MOTION_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_PedoStepReset
-* Description : Write PEDO_RST_STEP
-* Input : LSM6DSL_ACC_GYRO_PEDO_RST_STEP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_PedoStepReset(void *handle, LSM6DSL_ACC_GYRO_PEDO_RST_STEP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_PEDO_RST_STEP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_PedoStepReset
-* Description : Read PEDO_RST_STEP
-* Input : Pointer to LSM6DSL_ACC_GYRO_PEDO_RST_STEP_t
-* Output : Status of PEDO_RST_STEP see LSM6DSL_ACC_GYRO_PEDO_RST_STEP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_PedoStepReset(void *handle, LSM6DSL_ACC_GYRO_PEDO_RST_STEP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_PEDO_RST_STEP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TILT
-* Description : Write XEN_G
-* Input : LSM6DSL_ACC_GYRO_TILT_G_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TILT(void *handle, LSM6DSL_ACC_GYRO_TILT_G_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TILT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TILT
-* Description : Read XEN_G
-* Input : Pointer to LSM6DSL_ACC_GYRO_TILT_G_t
-* Output : Status of XEN_G see LSM6DSL_ACC_GYRO_TILT_G_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TILT(void *handle, LSM6DSL_ACC_GYRO_TILT_G_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TILT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_PEDO
-* Description : Write PEDO_EN
-* Input : LSM6DSL_ACC_GYRO_PEDO_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_PEDO(void *handle, LSM6DSL_ACC_GYRO_PEDO_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_PEDO_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_PEDO
-* Description : Read PEDO_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_PEDO_t
-* Output : Status of PEDO_EN see LSM6DSL_ACC_GYRO_PEDO_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_PEDO(void *handle, LSM6DSL_ACC_GYRO_PEDO_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_PEDO_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TIMER
-* Description : Write TIMER_EN
-* Input : LSM6DSL_ACC_GYRO_TIMER_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TIMER(void *handle, LSM6DSL_ACC_GYRO_TIMER_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TIMER_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TIMER
-* Description : Read TIMER_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_TIMER_t
-* Output : Status of TIMER_EN see LSM6DSL_ACC_GYRO_TIMER_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TIMER(void *handle, LSM6DSL_ACC_GYRO_TIMER_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TIMER_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FUNC_EN
-* Description : Write FUNC_EN
-* Input : LSM6DSL_ACC_GYRO_FUNC_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FUNC_EN(void *handle, LSM6DSL_ACC_GYRO_FUNC_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FUNC_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FUNC_EN
-* Description : Read FUNC_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_FUNC_EN_t
-* Output : Status of FUNC_EN see LSM6DSL_ACC_GYRO_FUNC_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FUNC_EN(void *handle, LSM6DSL_ACC_GYRO_FUNC_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CTRL10_C, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FUNC_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_I2C_MASTER_Enable
-* Description : Write MASTER_ON
-* Input : LSM6DSL_ACC_GYRO_MASTER_ON_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_I2C_MASTER_Enable(void *handle, LSM6DSL_ACC_GYRO_MASTER_ON_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_MASTER_ON_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_I2C_MASTER_Enable
-* Description : Read MASTER_ON
-* Input : Pointer to LSM6DSL_ACC_GYRO_MASTER_ON_t
-* Output : Status of MASTER_ON see LSM6DSL_ACC_GYRO_MASTER_ON_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_I2C_MASTER_Enable(void *handle, LSM6DSL_ACC_GYRO_MASTER_ON_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_MASTER_ON_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_IronCorrection_EN
-* Description : Write IRON_EN
-* Input : LSM6DSL_ACC_GYRO_IRON_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_IronCorrection_EN(void *handle, LSM6DSL_ACC_GYRO_IRON_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_IRON_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_IronCorrection_EN
-* Description : Read IRON_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_IRON_EN_t
-* Output : Status of IRON_EN see LSM6DSL_ACC_GYRO_IRON_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_IronCorrection_EN(void *handle, LSM6DSL_ACC_GYRO_IRON_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_IRON_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_PASS_THRU_MODE
-* Description : Write PASS_THRU_MODE
-* Input : LSM6DSL_ACC_GYRO_PASS_THRU_MODE_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_PASS_THRU_MODE(void *handle, LSM6DSL_ACC_GYRO_PASS_THRU_MODE_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_PASS_THRU_MODE_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_PASS_THRU_MODE
-* Description : Read PASS_THRU_MODE
-* Input : Pointer to LSM6DSL_ACC_GYRO_PASS_THRU_MODE_t
-* Output : Status of PASS_THRU_MODE see LSM6DSL_ACC_GYRO_PASS_THRU_MODE_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_PASS_THRU_MODE(void *handle, LSM6DSL_ACC_GYRO_PASS_THRU_MODE_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_PASS_THRU_MODE_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_PULL_UP_EN
-* Description : Write PULL_UP_EN
-* Input : LSM6DSL_ACC_GYRO_PULL_UP_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_PULL_UP_EN(void *handle, LSM6DSL_ACC_GYRO_PULL_UP_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_PULL_UP_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_PULL_UP_EN
-* Description : Read PULL_UP_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_PULL_UP_EN_t
-* Output : Status of PULL_UP_EN see LSM6DSL_ACC_GYRO_PULL_UP_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_PULL_UP_EN(void *handle, LSM6DSL_ACC_GYRO_PULL_UP_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_PULL_UP_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SensorHUB_Trigger_Sel
-* Description : Write START_CONFIG
-* Input : LSM6DSL_ACC_GYRO_START_CONFIG_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SensorHUB_Trigger_Sel(void *handle, LSM6DSL_ACC_GYRO_START_CONFIG_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_START_CONFIG_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SensorHUB_Trigger_Sel
-* Description : Read START_CONFIG
-* Input : Pointer to LSM6DSL_ACC_GYRO_START_CONFIG_t
-* Output : Status of START_CONFIG see LSM6DSL_ACC_GYRO_START_CONFIG_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SensorHUB_Trigger_Sel(void *handle, LSM6DSL_ACC_GYRO_START_CONFIG_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_START_CONFIG_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DATA_VAL_SEL_FIFO
-* Description : Write DATA_VAL_SEL_FIFO
-* Input : LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DATA_VAL_SEL_FIFO(void *handle, LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DATA_VAL_SEL_FIFO
-* Description : Read DATA_VAL_SEL_FIFO
-* Input : Pointer to LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_t
-* Output : Status of DATA_VAL_SEL_FIFO see LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DATA_VAL_SEL_FIFO(void *handle, LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DATA_VAL_SEL_FIFO_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DRDY_ON_INT1
-* Description : Write DRDY_ON_INT1
-* Input : LSM6DSL_ACC_GYRO_DRDY_ON_INT1_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DRDY_ON_INT1(void *handle, LSM6DSL_ACC_GYRO_DRDY_ON_INT1_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DRDY_ON_INT1_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DRDY_ON_INT1
-* Description : Read DRDY_ON_INT1
-* Input : Pointer to LSM6DSL_ACC_GYRO_DRDY_ON_INT1_t
-* Output : Status of DRDY_ON_INT1 see LSM6DSL_ACC_GYRO_DRDY_ON_INT1_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DRDY_ON_INT1(void *handle, LSM6DSL_ACC_GYRO_DRDY_ON_INT1_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MASTER_CONFIG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DRDY_ON_INT1_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_Z_WU
-* Description : Read Z_WU
-* Input : Pointer to LSM6DSL_ACC_GYRO_Z_WU_t
-* Output : Status of Z_WU see LSM6DSL_ACC_GYRO_Z_WU_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_Z_WU(void *handle, LSM6DSL_ACC_GYRO_Z_WU_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_Z_WU_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_Y_WU
-* Description : Read Y_WU
-* Input : Pointer to LSM6DSL_ACC_GYRO_Y_WU_t
-* Output : Status of Y_WU see LSM6DSL_ACC_GYRO_Y_WU_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_Y_WU(void *handle, LSM6DSL_ACC_GYRO_Y_WU_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_Y_WU_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_X_WU
-* Description : Read X_WU
-* Input : Pointer to LSM6DSL_ACC_GYRO_X_WU_t
-* Output : Status of X_WU see LSM6DSL_ACC_GYRO_X_WU_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_X_WU(void *handle, LSM6DSL_ACC_GYRO_X_WU_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_X_WU_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WU_EV_STATUS
-* Description : Read WU_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_WU_EV_STATUS_t
-* Output : Status of WU_EV_STATUS see LSM6DSL_ACC_GYRO_WU_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WU_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_WU_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_WU_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SLEEP_EV_STATUS
-* Description : Read SLEEP_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_SLEEP_EV_STATUS_t
-* Output : Status of SLEEP_EV_STATUS see LSM6DSL_ACC_GYRO_SLEEP_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SLEEP_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_SLEEP_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SLEEP_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FF_EV_STATUS
-* Description : Read FF_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_FF_EV_STATUS_t
-* Output : Status of FF_EV_STATUS see LSM6DSL_ACC_GYRO_FF_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FF_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_FF_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FF_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_Z_TAP
-* Description : Read Z_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_Z_TAP_t
-* Output : Status of Z_TAP see LSM6DSL_ACC_GYRO_Z_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_Z_TAP(void *handle, LSM6DSL_ACC_GYRO_Z_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_Z_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_Y_TAP
-* Description : Read Y_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_Y_TAP_t
-* Output : Status of Y_TAP see LSM6DSL_ACC_GYRO_Y_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_Y_TAP(void *handle, LSM6DSL_ACC_GYRO_Y_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_Y_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_X_TAP
-* Description : Read X_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_X_TAP_t
-* Output : Status of X_TAP see LSM6DSL_ACC_GYRO_X_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_X_TAP(void *handle, LSM6DSL_ACC_GYRO_X_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_X_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TAP_SIGN
-* Description : Read TAP_SIGN
-* Input : Pointer to LSM6DSL_ACC_GYRO_TAP_SIGN_t
-* Output : Status of TAP_SIGN see LSM6DSL_ACC_GYRO_TAP_SIGN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TAP_SIGN(void *handle, LSM6DSL_ACC_GYRO_TAP_SIGN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TAP_SIGN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DOUBLE_TAP_EV_STATUS
-* Description : Read DOUBLE_TAP_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_DOUBLE_TAP_EV_STATUS_t
-* Output : Status of DOUBLE_TAP_EV_STATUS see LSM6DSL_ACC_GYRO_DOUBLE_TAP_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DOUBLE_TAP_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_DOUBLE_TAP_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DOUBLE_TAP_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SINGLE_TAP_EV_STATUS
-* Description : Read SINGLE_TAP_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_SINGLE_TAP_EV_STATUS_t
-* Output : Status of SINGLE_TAP_EV_STATUS see LSM6DSL_ACC_GYRO_SINGLE_TAP_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SINGLE_TAP_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_SINGLE_TAP_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SINGLE_TAP_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TAP_EV_STATUS
-* Description : Read TAP_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_TAP_EV_STATUS_t
-* Output : Status of TAP_EV_STATUS see LSM6DSL_ACC_GYRO_TAP_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TAP_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_TAP_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TAP_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DSD_XL
-* Description : Read DSD_XL
-* Input : Pointer to LSM6DSL_ACC_GYRO_DSD_XL_t
-* Output : Status of DSD_XL see LSM6DSL_ACC_GYRO_DSD_XL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DSD_XL(void *handle, LSM6DSL_ACC_GYRO_DSD_XL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DSD_XL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DSD_XH
-* Description : Read DSD_XH
-* Input : Pointer to LSM6DSL_ACC_GYRO_DSD_XH_t
-* Output : Status of DSD_XH see LSM6DSL_ACC_GYRO_DSD_XH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DSD_XH(void *handle, LSM6DSL_ACC_GYRO_DSD_XH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DSD_XH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DSD_YL
-* Description : Read DSD_YL
-* Input : Pointer to LSM6DSL_ACC_GYRO_DSD_YL_t
-* Output : Status of DSD_YL see LSM6DSL_ACC_GYRO_DSD_YL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DSD_YL(void *handle, LSM6DSL_ACC_GYRO_DSD_YL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DSD_YL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DSD_YH
-* Description : Read DSD_YH
-* Input : Pointer to LSM6DSL_ACC_GYRO_DSD_YH_t
-* Output : Status of DSD_YH see LSM6DSL_ACC_GYRO_DSD_YH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DSD_YH(void *handle, LSM6DSL_ACC_GYRO_DSD_YH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DSD_YH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DSD_ZL
-* Description : Read DSD_ZL
-* Input : Pointer to LSM6DSL_ACC_GYRO_DSD_ZL_t
-* Output : Status of DSD_ZL see LSM6DSL_ACC_GYRO_DSD_ZL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DSD_ZL(void *handle, LSM6DSL_ACC_GYRO_DSD_ZL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DSD_ZL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DSD_ZH
-* Description : Read DSD_ZH
-* Input : Pointer to LSM6DSL_ACC_GYRO_DSD_ZH_t
-* Output : Status of DSD_ZH see LSM6DSL_ACC_GYRO_DSD_ZH_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DSD_ZH(void *handle, LSM6DSL_ACC_GYRO_DSD_ZH_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DSD_ZH_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_D6D_EV_STATUS
-* Description : Read D6D_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_D6D_EV_STATUS_t
-* Output : Status of D6D_EV_STATUS see LSM6DSL_ACC_GYRO_D6D_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_D6D_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_D6D_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_D6D_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_D6D_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_XLDA
-* Description : Read XLDA
-* Input : Pointer to LSM6DSL_ACC_GYRO_XLDA_t
-* Output : Status of XLDA see LSM6DSL_ACC_GYRO_XLDA_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_XLDA(void *handle, LSM6DSL_ACC_GYRO_XLDA_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_STATUS_REG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_XLDA_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_GDA
-* Description : Read GDA
-* Input : Pointer to LSM6DSL_ACC_GYRO_GDA_t
-* Output : Status of GDA see LSM6DSL_ACC_GYRO_GDA_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_GDA(void *handle, LSM6DSL_ACC_GYRO_GDA_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_STATUS_REG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_GDA_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TDA
-* Description : Read GDA
-* Input : Pointer to LSM6DSL_ACC_GYRO_TDA_t
-* Output : Status of GDA see LSM6DSL_ACC_GYRO_TDA_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TDA(void *handle, LSM6DSL_ACC_GYRO_TDA_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_STATUS_REG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TDA_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFONumOfEntries
-* Description : Read DIFF_FIFO
-* Input : Pointer to u16_t
-* Output : Status of DIFF_FIFO
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFONumOfEntries(void *handle, u16_t *value)
-{
- u8_t valueH, valueL;
-
- /* Low part from FIFO_STATUS1 */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS1, (u8_t *)&valueL, 1) )
- return MEMS_ERROR;
-
- valueL &= LSM6DSL_ACC_GYRO_DIFF_FIFO_STATUS1_MASK; //coerce
- valueL = valueL >> LSM6DSL_ACC_GYRO_DIFF_FIFO_STATUS1_POSITION; //mask
-
- /* High part from FIFO_STATUS2 */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS2, (u8_t *)&valueH, 1) )
- return MEMS_ERROR;
-
- valueH &= LSM6DSL_ACC_GYRO_DIFF_FIFO_STATUS2_MASK; //coerce
- valueH = valueH >> LSM6DSL_ACC_GYRO_DIFF_FIFO_STATUS2_POSITION; //mask
-
- *value = ((valueH << 8) & 0xFF00) | valueL;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFOEmpty
-* Description : Read FIFO_EMPTY
-* Input : Pointer to LSM6DSL_ACC_GYRO_FIFO_EMPTY_t
-* Output : Status of FIFO_EMPTY see LSM6DSL_ACC_GYRO_FIFO_EMPTY_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFOEmpty(void *handle, LSM6DSL_ACC_GYRO_FIFO_EMPTY_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FIFO_EMPTY_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFOFull
-* Description : Read FIFO_FULL
-* Input : Pointer to LSM6DSL_ACC_GYRO_FIFO_FULL_t
-* Output : Status of FIFO_FULL see LSM6DSL_ACC_GYRO_FIFO_FULL_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFOFull(void *handle, LSM6DSL_ACC_GYRO_FIFO_FULL_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FIFO_FULL_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_OVERRUN
-* Description : Read OVERRUN
-* Input : Pointer to LSM6DSL_ACC_GYRO_OVERRUN_t
-* Output : Status of OVERRUN see LSM6DSL_ACC_GYRO_OVERRUN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_OVERRUN(void *handle, LSM6DSL_ACC_GYRO_OVERRUN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_OVERRUN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WaterMark
-* Description : Read WTM
-* Input : Pointer to LSM6DSL_ACC_GYRO_WTM_t
-* Output : Status of WTM see LSM6DSL_ACC_GYRO_WTM_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WaterMark(void *handle, LSM6DSL_ACC_GYRO_WTM_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_WTM_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FIFOPattern
-* Description : Read FIFO_PATTERN
-* Input : Pointer to u16_t
-* Output : Status of FIFO_PATTERN
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FIFOPattern(void *handle, u16_t *value)
-{
- u8_t valueH, valueL;
-
- /* Low part from FIFO_STATUS3 */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS3, (u8_t *)&valueL, 1) )
- return MEMS_ERROR;
-
- valueL &= LSM6DSL_ACC_GYRO_FIFO_STATUS3_PATTERN_MASK; //coerce
- valueL = valueL >> LSM6DSL_ACC_GYRO_FIFO_STATUS3_PATTERN_POSITION; //mask
-
- /* High part from FIFO_STATUS4 */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_STATUS4, (u8_t *)&valueH, 1) )
- return MEMS_ERROR;
-
- valueH &= LSM6DSL_ACC_GYRO_FIFO_STATUS4_PATTERN_MASK; //coerce
- valueH = valueH >> LSM6DSL_ACC_GYRO_FIFO_STATUS4_PATTERN_POSITION; //mask
-
- *value = ((valueH << 8) & 0xFF00) | valueL;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SENS_HUB_END
-* Description : Read SENS_HUB_END
-* Input : Pointer to LSM6DSL_ACC_GYRO_SENS_HUB_END_t
-* Output : Status of SENS_HUB_END see LSM6DSL_ACC_GYRO_SENS_HUB_END_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SENS_HUB_END(void *handle, LSM6DSL_ACC_GYRO_SENS_HUB_END_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SENS_HUB_END_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SOFT_IRON_END
-* Description : Read SOFT_IRON_END
-* Input : Pointer to LSM6DSL_ACC_GYRO_SOFT_IRON_END_t
-* Output : Status of SOFT_IRON_END see LSM6DSL_ACC_GYRO_SOFT_IRON_END_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SOFT_IRON_END(void *handle, LSM6DSL_ACC_GYRO_SOFT_IRON_END_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SOFT_IRON_END_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_HardIron
-* Description : Read HI_FAIL
-* Input : Pointer to LSM6DSL_ACC_GYRO_SOFT_HARD_IRON_STAT_t
-* Output : Status of HI_FAIL see LSM6DSL_ACC_GYRO_SOFT_HARD_IRON_STAT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_HardIron(void *handle, LSM6DSL_ACC_GYRO_SOFT_HARD_IRON_STAT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_HARD_IRON_STAT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_STEP_OVERFLOW
-* Description : Read STEP_OVERFLOW
-* Input : Pointer to LSM6DSL_ACC_GYRO_STEP_OVERFLOW_t
-* Output : Status of STEP_OVERFLOW see LSM6DSL_ACC_GYRO_STEP_OVERFLOW_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_STEP_OVERFLOW(void *handle, LSM6DSL_ACC_GYRO_STEP_OVERFLOW_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_STEP_OVERFLOW_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_STEP_COUNT_DELTA
-* Description : Read STEP_COUNT_DELTA_IA
-* Input : Pointer to LSM6DSL_ACC_GYRO_STEP_COUNT_DELTA_t
-* Output : Status of STEP_COUNT_DELTA_IA see LSM6DSL_ACC_GYRO_STEP_COUNT_DELTA_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_STEP_COUNT_DELTA(void *handle, LSM6DSL_ACC_GYRO_STEP_COUNT_DELTA_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_STEP_COUNT_DELTA_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_PEDO_EV_STATUS
-* Description : Read PEDO_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_PEDO_EV_STATUS_t
-* Output : Status of PEDO_EV_STATUS see LSM6DSL_ACC_GYRO_PEDO_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_PEDO_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_PEDO_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_PEDO_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TILT_EV_STATUS
-* Description : Read TILT_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_TILT_EV_STATUS_t
-* Output : Status of TILT_EV_STATUS see LSM6DSL_ACC_GYRO_TILT_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TILT_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_TILT_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TILT_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SIGN_MOT_EV_STATUS
-* Description : Read SIGN_MOT_EV_STATUS
-* Input : Pointer to LSM6DSL_ACC_GYRO_SIGN_MOT_EV_STATUS_t
-* Output : Status of SIGN_MOT_EV_STATUS see LSM6DSL_ACC_GYRO_SIGN_MOT_EV_STATUS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SIGN_MOT_EV_STATUS(void *handle, LSM6DSL_ACC_GYRO_SIGN_MOT_EV_STATUS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FUNC_SRC, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SIGN_MOT_EV_STATUS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_LIR
-* Description : Write LIR
-* Input : LSM6DSL_ACC_GYRO_LIR_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_LIR(void *handle, LSM6DSL_ACC_GYRO_LIR_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_LIR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_LIR
-* Description : Read LIR
-* Input : Pointer to LSM6DSL_ACC_GYRO_LIR_t
-* Output : Status of LIR see LSM6DSL_ACC_GYRO_LIR_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_LIR(void *handle, LSM6DSL_ACC_GYRO_LIR_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_LIR_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TAP_Z_EN
-* Description : Write TAP_Z_EN
-* Input : LSM6DSL_ACC_GYRO_TAP_Z_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TAP_Z_EN(void *handle, LSM6DSL_ACC_GYRO_TAP_Z_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TAP_Z_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TAP_Z_EN
-* Description : Read TAP_Z_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_TAP_Z_EN_t
-* Output : Status of TAP_Z_EN see LSM6DSL_ACC_GYRO_TAP_Z_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TAP_Z_EN(void *handle, LSM6DSL_ACC_GYRO_TAP_Z_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TAP_Z_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TAP_Y_EN
-* Description : Write TAP_Y_EN
-* Input : LSM6DSL_ACC_GYRO_TAP_Y_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TAP_Y_EN(void *handle, LSM6DSL_ACC_GYRO_TAP_Y_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TAP_Y_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TAP_Y_EN
-* Description : Read TAP_Y_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_TAP_Y_EN_t
-* Output : Status of TAP_Y_EN see LSM6DSL_ACC_GYRO_TAP_Y_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TAP_Y_EN(void *handle, LSM6DSL_ACC_GYRO_TAP_Y_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TAP_Y_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TAP_X_EN
-* Description : Write TAP_X_EN
-* Input : LSM6DSL_ACC_GYRO_TAP_X_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TAP_X_EN(void *handle, LSM6DSL_ACC_GYRO_TAP_X_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TAP_X_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TAP_X_EN
-* Description : Read TAP_X_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_TAP_X_EN_t
-* Output : Status of TAP_X_EN see LSM6DSL_ACC_GYRO_TAP_X_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TAP_X_EN(void *handle, LSM6DSL_ACC_GYRO_TAP_X_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TAP_X_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SLOPE_FDS
-* Description : Write SLOPE_FDS
-* Input : LSM6DSL_ACC_GYRO_SLOPE_FDS_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SLOPE_FDS(void *handle, LSM6DSL_ACC_GYRO_SLOPE_FDS_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SLOPE_FDS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SLOPE_FDS
-* Description : Read SLOPE_FDS
-* Input : Pointer to LSM6DSL_ACC_GYRO_SLOPE_FDS_t
-* Output : Status of SLOPE_FDS see LSM6DSL_ACC_GYRO_SLOPE_FDS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SLOPE_FDS(void *handle, LSM6DSL_ACC_GYRO_SLOPE_FDS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SLOPE_FDS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_BASIC_INT
-* Description : Write INTERRUPTS_ENABLE
-* Input : LSM6DSL_ACC_GYRO_INT_EN_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_BASIC_INT(void *handle, LSM6DSL_ACC_GYRO_INT_EN_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT_EN_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_BASIC_INT
-* Description : Read INTERRUPTS_ENABLE
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT_EN_t
-* Output : Status of INTERRUPTS_ENABLE see LSM6DSL_ACC_GYRO_INT_EN_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_BASIC_INT(void *handle, LSM6DSL_ACC_GYRO_INT_EN_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_CFG1, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT_EN_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TAP_THS
-* Description : Write TAP_THS
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TAP_THS(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_TAP_THS_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_TAP_THS_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TAP_THS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TAP_THS
-* Description : Read TAP_THS
-* Input : Pointer to u8_t
-* Output : Status of TAP_THS
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TAP_THS(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TAP_THS_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_TAP_THS_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SIXD_THS
-* Description : Write SIXD_THS
-* Input : LSM6DSL_ACC_GYRO_SIXD_THS_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SIXD_THS(void *handle, LSM6DSL_ACC_GYRO_SIXD_THS_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SIXD_THS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SIXD_THS
-* Description : Read SIXD_THS
-* Input : Pointer to LSM6DSL_ACC_GYRO_SIXD_THS_t
-* Output : Status of SIXD_THS see LSM6DSL_ACC_GYRO_SIXD_THS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SIXD_THS(void *handle, LSM6DSL_ACC_GYRO_SIXD_THS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SIXD_THS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_D4D
-* Description : Write D4D_EN
-* Input : LSM6DSL_ACC_GYRO_D4D_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_D4D(void *handle, LSM6DSL_ACC_GYRO_D4D_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_D4D_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_D4D
-* Description : Read D4D_EN
-* Input : Pointer to LSM6DSL_ACC_GYRO_D4D_t
-* Output : Status of D4D_EN see LSM6DSL_ACC_GYRO_D4D_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_D4D(void *handle, LSM6DSL_ACC_GYRO_D4D_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TAP_THS_6D, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_D4D_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SHOCK_Duration
-* Description : Write SHOCK
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SHOCK_Duration(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_SHOCK_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_SHOCK_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SHOCK_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SHOCK_Duration
-* Description : Read SHOCK
-* Input : Pointer to u8_t
-* Output : Status of SHOCK
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SHOCK_Duration(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SHOCK_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_SHOCK_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_QUIET_Duration
-* Description : Write QUIET
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_QUIET_Duration(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_QUIET_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_QUIET_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_QUIET_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_QUIET_Duration
-* Description : Read QUIET
-* Input : Pointer to u8_t
-* Output : Status of QUIET
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_QUIET_Duration(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_QUIET_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_QUIET_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_DUR
-* Description : Write DUR
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_DUR(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_DUR_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_DUR_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_DUR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_DUR
-* Description : Read DUR
-* Input : Pointer to u8_t
-* Output : Status of DUR
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_DUR(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_INT_DUR2, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_DUR_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_DUR_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_WK_THS
-* Description : Write WK_THS
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_WK_THS(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_WK_THS_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_WK_THS_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_THS, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_WK_THS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_THS, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WK_THS
-* Description : Read WK_THS
-* Input : Pointer to u8_t
-* Output : Status of WK_THS
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WK_THS(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_THS, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_WK_THS_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_WK_THS_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SINGLE_DOUBLE_TAP_EV
-* Description : Write SINGLE_DOUBLE_TAP
-* Input : LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SINGLE_DOUBLE_TAP_EV(void *handle, LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_THS, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_THS, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SINGLE_DOUBLE_TAP_EV
-* Description : Read SINGLE_DOUBLE_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_t
-* Output : Status of SINGLE_DOUBLE_TAP see LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SINGLE_DOUBLE_TAP_EV(void *handle, LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_THS, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SINGLE_DOUBLE_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SLEEP_DUR
-* Description : Write SLEEP_DUR
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SLEEP_DUR(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_SLEEP_DUR_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_SLEEP_DUR_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_SLEEP_DUR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SLEEP_DUR
-* Description : Read SLEEP_DUR
-* Input : Pointer to u8_t
-* Output : Status of SLEEP_DUR
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SLEEP_DUR(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_SLEEP_DUR_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_SLEEP_DUR_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TIMER_HR
-* Description : Write TIMER_HR
-* Input : LSM6DSL_ACC_GYRO_TIMER_HR_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TIMER_HR(void *handle, LSM6DSL_ACC_GYRO_TIMER_HR_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_TIMER_HR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TIMER_HR
-* Description : Read TIMER_HR
-* Input : Pointer to LSM6DSL_ACC_GYRO_TIMER_HR_t
-* Output : Status of TIMER_HR see LSM6DSL_ACC_GYRO_TIMER_HR_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TIMER_HR(void *handle, LSM6DSL_ACC_GYRO_TIMER_HR_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_TIMER_HR_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_WAKE_DUR
-* Description : Write WAKE_DUR
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_WAKE_DUR(void *handle, u8_t newValue)
-{
- u8_t value;
-
- newValue = newValue << LSM6DSL_ACC_GYRO_WAKE_DUR_POSITION; //mask
- newValue &= LSM6DSL_ACC_GYRO_WAKE_DUR_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_WAKE_DUR_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WAKE_DUR
-* Description : Read WAKE_DUR
-* Input : Pointer to u8_t
-* Output : Status of WAKE_DUR
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WAKE_DUR(void *handle, u8_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_WAKE_DUR_MASK; //coerce
- *value = *value >> LSM6DSL_ACC_GYRO_WAKE_DUR_POSITION; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FF_THS
-* Description : Write FF_THS
-* Input : LSM6DSL_ACC_GYRO_FF_THS_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FF_THS(void *handle, LSM6DSL_ACC_GYRO_FF_THS_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FREE_FALL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FF_THS_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FREE_FALL, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FF_THS
-* Description : Read FF_THS
-* Input : Pointer to LSM6DSL_ACC_GYRO_FF_THS_t
-* Output : Status of FF_THS see LSM6DSL_ACC_GYRO_FF_THS_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FF_THS(void *handle, LSM6DSL_ACC_GYRO_FF_THS_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FREE_FALL, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_FF_THS_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FF_Duration
-* Description : Write FF_DUR
-* Input : u8_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FF_Duration(void *handle, u8_t newValue)
-{
- u8_t valueH, valueL;
- u8_t value;
-
- valueL = newValue & 0x1F;
- valueH = (newValue >> 5) & 0x1;
-
- /* Low part in FREE_FALL reg */
- valueL = valueL << LSM6DSL_ACC_GYRO_FF_FREE_FALL_DUR_POSITION; //mask
- valueL &= LSM6DSL_ACC_GYRO_FF_FREE_FALL_DUR_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FREE_FALL, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FF_FREE_FALL_DUR_MASK;
- value |= valueL;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_FREE_FALL, &value, 1) )
- return MEMS_ERROR;
-
- /* High part in WAKE_UP_DUR reg */
- valueH = valueH << LSM6DSL_ACC_GYRO_FF_WAKE_UP_DUR_POSITION; //mask
- valueH &= LSM6DSL_ACC_GYRO_FF_WAKE_UP_DUR_MASK; //coerce
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_FF_WAKE_UP_DUR_MASK;
- value |= valueH;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FF_Duration
-* Description : Read FF_DUR
-* Input : Pointer to u8_t
-* Output : Status of FF_DUR
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FF_Duration(void *handle, u8_t *value)
-{
- u8_t valueH, valueL;
-
- /* Low part from FREE_FALL reg */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FREE_FALL, (u8_t *)&valueL, 1) )
- return MEMS_ERROR;
-
- valueL &= LSM6DSL_ACC_GYRO_FF_FREE_FALL_DUR_MASK; //coerce
- valueL = valueL >> LSM6DSL_ACC_GYRO_FF_FREE_FALL_DUR_POSITION; //mask
-
- /* High part from WAKE_UP_DUR reg */
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_WAKE_UP_DUR, (u8_t *)&valueH, 1) )
- return MEMS_ERROR;
-
- valueH &= LSM6DSL_ACC_GYRO_FF_WAKE_UP_DUR_MASK; //coerce
- valueH = valueH >> LSM6DSL_ACC_GYRO_FF_WAKE_UP_DUR_POSITION; //mask
-
- *value = ((valueH << 5) & 0x20) | valueL;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TimerEvRouteInt1
-* Description : Write INT1_TIMER
-* Input : LSM6DSL_ACC_GYRO_INT1_TIMER_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TimerEvRouteInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_TIMER_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_TIMER_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TimerEvRouteInt1
-* Description : Read INT1_TIMER
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_TIMER_t
-* Output : Status of INT1_TIMER see LSM6DSL_ACC_GYRO_INT1_TIMER_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TimerEvRouteInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_TIMER_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_TIMER_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TiltEvOnInt1
-* Description : Write INT1_TILT
-* Input : LSM6DSL_ACC_GYRO_INT1_TILT_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TiltEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_TILT_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_TILT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TiltEvOnInt1
-* Description : Read INT1_TILT
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_TILT_t
-* Output : Status of INT1_TILT see LSM6DSL_ACC_GYRO_INT1_TILT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TiltEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_TILT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_TILT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_6DEvOnInt1
-* Description : Write INT1_6D
-* Input : LSM6DSL_ACC_GYRO_INT1_6D_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_6DEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_6D_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_6D_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_6DEvOnInt1
-* Description : Read INT1_6D
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_6D_t
-* Output : Status of INT1_6D see LSM6DSL_ACC_GYRO_INT1_6D_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_6DEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_6D_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_6D_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TapEvOnInt1
-* Description : Write INT1_TAP
-* Input : LSM6DSL_ACC_GYRO_INT1_TAP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TapEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_TAP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_TAP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TapEvOnInt1
-* Description : Read INT1_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_TAP_t
-* Output : Status of INT1_TAP see LSM6DSL_ACC_GYRO_INT1_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TapEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FFEvOnInt1
-* Description : Write INT1_FF
-* Input : LSM6DSL_ACC_GYRO_INT1_FF_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FFEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_FF_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_FF_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FFEvOnInt1
-* Description : Read INT1_FF
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_FF_t
-* Output : Status of INT1_FF see LSM6DSL_ACC_GYRO_INT1_FF_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FFEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_FF_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_FF_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_WUEvOnInt1
-* Description : Write INT1_WU
-* Input : LSM6DSL_ACC_GYRO_INT1_WU_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_WUEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_WU_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_WU_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WUEvOnInt1
-* Description : Read INT1_WU
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_WU_t
-* Output : Status of INT1_WU see LSM6DSL_ACC_GYRO_INT1_WU_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WUEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_WU_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_WU_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SingleTapOnInt1
-* Description : Write INT1_SINGLE_TAP
-* Input : LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SingleTapOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SingleTapOnInt1
-* Description : Read INT1_SINGLE_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_t
-* Output : Status of INT1_SINGLE_TAP see LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SingleTapOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_SINGLE_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SleepEvOnInt1
-* Description : Write INT1_SLEEP
-* Input : LSM6DSL_ACC_GYRO_INT1_SLEEP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SleepEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_SLEEP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT1_SLEEP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SleepEvOnInt1
-* Description : Read INT1_SLEEP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT1_SLEEP_t
-* Output : Status of INT1_SLEEP see LSM6DSL_ACC_GYRO_INT1_SLEEP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SleepEvOnInt1(void *handle, LSM6DSL_ACC_GYRO_INT1_SLEEP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD1_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT1_SLEEP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_MagCorrection_Int2
-* Description : Write INT2_IRON
-* Input : LSM6DSL_ACC_GYRO_INT2_IRON_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_MagCorrection_Int2(void *handle, LSM6DSL_ACC_GYRO_INT2_IRON_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_IRON_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_MagCorrection_Int2
-* Description : Read INT2_IRON
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_IRON_t
-* Output : Status of INT2_IRON see LSM6DSL_ACC_GYRO_INT2_IRON_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_MagCorrection_Int2(void *handle, LSM6DSL_ACC_GYRO_INT2_IRON_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_IRON_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TiltEvOnInt2
-* Description : Write INT2_TILT
-* Input : LSM6DSL_ACC_GYRO_INT2_TILT_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TiltEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_TILT_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_TILT_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TiltEvOnInt2
-* Description : Read INT2_TILT
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_TILT_t
-* Output : Status of INT2_TILT see LSM6DSL_ACC_GYRO_INT2_TILT_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TiltEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_TILT_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_TILT_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_6DEvOnInt2
-* Description : Write INT2_6D
-* Input : LSM6DSL_ACC_GYRO_INT2_6D_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_6DEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_6D_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_6D_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_6DEvOnInt2
-* Description : Read INT2_6D
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_6D_t
-* Output : Status of INT2_6D see LSM6DSL_ACC_GYRO_INT2_6D_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_6DEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_6D_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_6D_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_TapEvOnInt2
-* Description : Write INT2_TAP
-* Input : LSM6DSL_ACC_GYRO_INT2_TAP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_TapEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_TAP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_TAP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_TapEvOnInt2
-* Description : Read INT2_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_TAP_t
-* Output : Status of INT2_TAP see LSM6DSL_ACC_GYRO_INT2_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_TapEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_FFEvOnInt2
-* Description : Write INT2_FF
-* Input : LSM6DSL_ACC_GYRO_INT2_FF_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_FFEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_FF_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_FF_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_FFEvOnInt2
-* Description : Read INT2_FF
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_FF_t
-* Output : Status of INT2_FF see LSM6DSL_ACC_GYRO_INT2_FF_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_FFEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_FF_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_FF_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_WUEvOnInt2
-* Description : Write INT2_WU
-* Input : LSM6DSL_ACC_GYRO_INT2_WU_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_WUEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_WU_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_WU_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_WUEvOnInt2
-* Description : Read INT2_WU
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_WU_t
-* Output : Status of INT2_WU see LSM6DSL_ACC_GYRO_INT2_WU_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_WUEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_WU_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_WU_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SingleTapOnInt2
-* Description : Write INT2_SINGLE_TAP
-* Input : LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SingleTapOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SingleTapOnInt2
-* Description : Read INT2_SINGLE_TAP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_t
-* Output : Status of INT2_SINGLE_TAP see LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SingleTapOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_SINGLE_TAP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_SleepEvOnInt2
-* Description : Write INT2_SLEEP
-* Input : LSM6DSL_ACC_GYRO_INT2_SLEEP_t
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_SleepEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_SLEEP_t newValue)
-{
- u8_t value;
-
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- value &= ~LSM6DSL_ACC_GYRO_INT2_SLEEP_MASK;
- value |= newValue;
-
- if( !LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, &value, 1) )
- return MEMS_ERROR;
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_R_SleepEvOnInt2
-* Description : Read INT2_SLEEP
-* Input : Pointer to LSM6DSL_ACC_GYRO_INT2_SLEEP_t
-* Output : Status of INT2_SLEEP see LSM6DSL_ACC_GYRO_INT2_SLEEP_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_R_SleepEvOnInt2(void *handle, LSM6DSL_ACC_GYRO_INT2_SLEEP_t *value)
-{
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_MD2_CFG, (u8_t *)value, 1) )
- return MEMS_ERROR;
-
- *value &= LSM6DSL_ACC_GYRO_INT2_SLEEP_MASK; //mask
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_GYRO_Get_GetFIFOData(u8_t *buff)
-* Description : Read GetFIFOData output register
-* Input : pointer to [u8_t]
-* Output : GetFIFOData buffer u8_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_Get_GetFIFOData(void *handle, u8_t *buff)
-{
- u8_t i, j, k;
- u8_t numberOfByteForDimension;
-
- numberOfByteForDimension=2/1;
-
- k=0;
- for (i=0; i<1;i++ )
- {
- for (j=0; j<numberOfByteForDimension;j++ )
- {
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_FIFO_DATA_OUT_L+k, &buff[k], 1))
- return MEMS_ERROR;
- k++;
- }
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_GYRO_Get_GetTimestamp(u8_t *buff)
-* Description : Read GetTimestamp output register
-* Input : pointer to [u8_t]
-* Output : GetTimestamp buffer u8_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_Get_GetTimestamp(void *handle, u8_t *buff)
-{
- u8_t i, j, k;
- u8_t numberOfByteForDimension;
-
- numberOfByteForDimension=3/1;
-
- k=0;
- for (i=0; i<1;i++ )
- {
- for (j=0; j<numberOfByteForDimension;j++ )
- {
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_TIMESTAMP0_REG+k, &buff[k], 1))
- return MEMS_ERROR;
- k++;
- }
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : status_t LSM6DSL_ACC_GYRO_Get_GetStepCounter(u8_t *buff)
-* Description : Read GetStepCounter output register
-* Input : pointer to [u8_t]
-* Output : GetStepCounter buffer u8_t
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_Get_GetStepCounter(void *handle, u8_t *buff)
-{
- u8_t i, j, k;
- u8_t numberOfByteForDimension;
-
- numberOfByteForDimension=2/1;
-
- k=0;
- for (i=0; i<1;i++ )
- {
- for (j=0; j<numberOfByteForDimension;j++ )
- {
- if( !LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_STEP_COUNTER_L+k, &buff[k], 1))
- return MEMS_ERROR;
- k++;
- }
- }
-
- return MEMS_SUCCESS;
-}
-
-/*******************************************************************************
-* Function Name : LSM6DSL_ACC_GYRO_W_PedoThreshold(void *handle, u8_t newValue)
-* Description : Set accelerometer threshold for pedometer
-* Input : pointer to [u8_t]
-* Output : None
-* Return : Status [MEMS_ERROR, MEMS_SUCCESS]
-*******************************************************************************/
-status_t LSM6DSL_ACC_GYRO_W_PedoThreshold(void *handle, u8_t newValue)
-{
- u8_t value;
-
- /* Open Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_ENABLED);
-
- /* read current value */
- LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_CONFIG_PEDO_THS_MIN, &value, 1);
-
- value &= ~0x1F;
- value |= (newValue & 0x1F);
-
- /* write new value */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_CONFIG_PEDO_THS_MIN, &value, 1);
-
- /* Close Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_DISABLED);
-
- return MEMS_SUCCESS;
-}
-
-/************** Use Sensor Hub *******************/
-/*
- * Program the nine Soft Iron Matrix coefficients.
- * The SI_Matrix buffer must provide coefficients
- * in xx, xy, xz, yx, yy, yz, zx, zy, zz order.
- */
-status_t LSM6DSL_ACC_GYRO_SH_init_SI_Matrix(void *handle, u8_t *SI_matrix)
-{
- /* Open Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_ENABLED);
-
- /* Write the Soft Iron Matrix coefficients */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_MAG_SI_XX, SI_matrix, 9);
-
- /* Close Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_DISABLED);
-
- return MEMS_SUCCESS;
-}
-
-/* Read a remote device through I2C Sensor Hub Slave 0 */
-status_t LSM6DSL_ACC_GYRO_SH0_Program(void *handle, u8_t SlvAddr, u8_t Reg, u8_t len)
-{
- /* Open Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_ENABLED);
-
- /* Write remote device I2C slave address */
- SlvAddr |= 0x1; /* Raise the read op bit */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SLV0_ADD, &SlvAddr, 1);
-
- /* Write remote device I2C subaddress */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SLV0_SUBADD, &Reg, 1);
-
- /* Write number of bytes to read [SLAVE0_CONFIG - 04h ]*/
- u8_t sl0_cfg = 0;
- sl0_cfg |= 0x00; //00 bit [7-6] : no decimation
- sl0_cfg |= 0x00; //00 bit [5-4] : one sensor
- sl0_cfg |= 0x00; // 0 bit [3] : source mode read disabled
- sl0_cfg |= len & 0x07; // bit [2-0] : number of bytes
-
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SLAVE0_CONFIG, &sl0_cfg, 1);
-
- /* Close Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_DISABLED);
-
- /* Enable FUNC */
- LSM6DSL_ACC_GYRO_W_FUNC_EN(handle, LSM6DSL_ACC_GYRO_FUNC_EN_ENABLED);
-
- /* MASTER_EN */
- LSM6DSL_ACC_GYRO_W_I2C_MASTER_Enable(handle, LSM6DSL_ACC_GYRO_MASTER_ON_ENABLED);
-
- return MEMS_SUCCESS;
-}
-
-/* Read a remote device through I2C Sensor Hub Slave 0 */
-status_t LSM6DSL_ACC_GYRO_SH0_ReadMem(void *handle, u8_t SlvAddr, u8_t Reg, u8_t *Bufp, u8_t len, u8_t stop)
-{
- LSM6DSL_ACC_GYRO_SENS_HUB_END_t op_cmpl = LSM6DSL_ACC_GYRO_SENS_HUB_END_STILL_ONGOING;
- LSM6DSL_ACC_GYRO_XLDA_t op_update = LSM6DSL_ACC_GYRO_XLDA_NO_DATA_AVAIL;
- u8_t dummy[6];
-
- LSM6DSL_ACC_GYRO_W_ODR_XL(handle, LSM6DSL_ACC_GYRO_ODR_XL_POWER_DOWN);
-
- LSM6DSL_ACC_GYRO_SH0_Program(handle, SlvAddr, Reg, len);
-
- /* Syncronize the SH with internal trigger (xl) */
- LSM6DSL_ACC_GYRO_W_ODR_XL(handle, LSM6DSL_ACC_GYRO_ODR_XL_104Hz);
-
- /* Wait until operation is not completed */
- LSM6DSL_ACC_GYRO_GetRawAccData(handle, dummy);
- do {
- LSM6DSL_ACC_GYRO_R_XLDA(handle, &op_update);
- } while(op_update != LSM6DSL_ACC_GYRO_XLDA_DATA_AVAIL);
- do {
- LSM6DSL_ACC_GYRO_R_SENS_HUB_END(handle, &op_cmpl);
- } while(op_cmpl != LSM6DSL_ACC_GYRO_SENS_HUB_END_OP_COMPLETED);
-
-
- /* Read the result */
- LSM6DSL_ACC_GYRO_ReadReg(handle, LSM6DSL_ACC_GYRO_SENSORHUB1_REG, Bufp, len);
-
- LSM6DSL_ACC_GYRO_W_ODR_XL(handle, LSM6DSL_ACC_GYRO_ODR_XL_POWER_DOWN);
-
- if (stop) {
- /* Stop everything */
- LSM6DSL_ACC_GYRO_W_FUNC_EN(handle, LSM6DSL_ACC_GYRO_FUNC_EN_DISABLED);
- LSM6DSL_ACC_GYRO_W_I2C_MASTER_Enable(handle, LSM6DSL_ACC_GYRO_MASTER_ON_DISABLED);
- }
-
- return MEMS_SUCCESS;
-}
-
-/* Write a remote device through I2C Sensor Hub Slave 0 */
-status_t LSM6DSL_ACC_GYRO_SH0_WriteByte(void *handle, u8_t SlvAddr, u8_t Reg, u8_t Bufp)
-{
- LSM6DSL_ACC_GYRO_SENS_HUB_END_t op_cmpl = LSM6DSL_ACC_GYRO_SENS_HUB_END_STILL_ONGOING;
- LSM6DSL_ACC_GYRO_XLDA_t op_update = LSM6DSL_ACC_GYRO_XLDA_NO_DATA_AVAIL;
- u8_t dummy[6];
-
- /* Open Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_ENABLED);
-
- /* Write remote device I2C slave address */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SLV0_ADD, &SlvAddr, 1);
-
- /* Write remote device I2C subaddress */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_SLV0_SUBADD, &Reg, 1);
-
- /* Write the data */
- LSM6DSL_ACC_GYRO_WriteReg(handle, LSM6DSL_ACC_GYRO_DATAWRITE_SRC_MODE_SUB_SLV0, &Bufp, 1);
-
- /* Close Embedded Function Register page*/
- LSM6DSL_ACC_GYRO_W_EmbeddedAccess(handle, LSM6DSL_ACC_GYRO_EMBEDDED_ACCESS_DISABLED);
-
- /* Enable FUNC */
- LSM6DSL_ACC_GYRO_W_FUNC_EN(handle, LSM6DSL_ACC_GYRO_FUNC_EN_ENABLED);
-
- /* Enable PULL_UP_EN and MASTER_EN */
- //LSM6DSL_ACC_GYRO_W_PULL_UP_EN(handle, LSM6DSL_ACC_GYRO_PULL_UP_EN_ENABLED);
- LSM6DSL_ACC_GYRO_W_I2C_MASTER_Enable(handle, LSM6DSL_ACC_GYRO_MASTER_ON_ENABLED);
-
- /* Syncronize the SH with internal trigger (xl) */
- LSM6DSL_ACC_GYRO_W_ODR_XL(handle, LSM6DSL_ACC_GYRO_ODR_XL_104Hz);
-
- /* Wait until operation is not completed */
- LSM6DSL_ACC_GYRO_GetRawAccData(handle, dummy);
- do {
- LSM6DSL_ACC_GYRO_R_XLDA(handle, &op_update);
- } while(op_update != LSM6DSL_ACC_GYRO_XLDA_DATA_AVAIL);
- do {
- LSM6DSL_ACC_GYRO_R_SENS_HUB_END(handle, &op_cmpl);
- } while(op_cmpl != LSM6DSL_ACC_GYRO_SENS_HUB_END_OP_COMPLETED);
-
- LSM6DSL_ACC_GYRO_W_ODR_XL(handle, LSM6DSL_ACC_GYRO_ODR_XL_POWER_DOWN);
-
- /* Stop everything */
- LSM6DSL_ACC_GYRO_W_FUNC_EN(handle, LSM6DSL_ACC_GYRO_FUNC_EN_DISABLED);
- LSM6DSL_ACC_GYRO_W_I2C_MASTER_Enable(handle, LSM6DSL_ACC_GYRO_MASTER_ON_DISABLED);
-
-
- return MEMS_SUCCESS;
-}