STMicroelectronics' M24SR NFC Dynamic Tag Library.

Dependencies:   ST_INTERFACES

Dependents:   X_NUCLEO_NFC01A1

Fork of M24SR by ST Expansion SW Team

M24SR series Dynamic NFC Tags

The M24SR series provides an NFC forum tag type 4 RF interface and supports the NFC data exchange format (NDEF). This enables NFC use cases such as simple Bluetooth pairing and other connection handovers, automatic links to URLs, storage of Vcard and other types of information. It can be used in a wide variety of applications, including consumer electronics, computer peripherals, home appliances, industrial automation and healthcare products.

  • NFC forum tag type 4 based on ISO 14443 RF interface
  • 1 MHz I²C serial interface operating from 2.7 to 5.5 V
  • EEPROM memory density from 2 Kbits to 64 Kbits with built-in NDEF message support
  • RF disable pin allowing the application to control RF access from NFC phones
  • 128-bit password protection
  • General-purpose output pin allowing flexibility for the applications (wake up on several types of events)
  • Simple antenna design, backward compatible with M24LR series

For further information and ordering please refer to the ST Page.

HelloWorld application

Import programHelloWorld_Async_M24SR

M24SR NFC example. Simple application to asynchronously write and read an URL from a M24SR tag.

M24SR.cpp

Committer:
nikapov
Date:
2017-07-31
Revision:
0:11161008d77a

File content as of revision 0:11161008d77a:

/**
 ******************************************************************************
 * @file    m24sr_class.cpp
 * @author  ST Central Labs
 * @version V2.0.0
 * @date    28 Apr 2017
 * @brief   This file provides a set of functions to interface with the M24SR
 *          device.
 ******************************************************************************
 * @attention
 *
 * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *   1. Redistributions of source code must retain the above copyright notice,
 *      this list of conditions and the following disclaimer.
 *   2. Redistributions in binary form must reproduce the above copyright notice,
 *      this list of conditions and the following disclaimer in the documentation
 *      and/or other materials provided with the distribution.
 *   3. Neither the name of STMicroelectronics nor the names of its contributors
 *      may be used to endorse or promote products derived from this software
 *      without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 ******************************************************************************
 */



/* Includes ------------------------------------------------------------------*/
#include "m24sr_def.h"
#include "M24SR.h"
#include "NDefNfcTagM24SR.h"

#ifdef GPIO_PIN_RESET
	#undef GPIO_PIN_RESET
#endif
#define GPIO_PIN_RESET (0)

#ifdef GPIO_PIN_SET
	#undef GPIO_PIN_SET
#endif
#define GPIO_PIN_SET (1)

#define M24SR_MAX_BYTE_OPERATION_LENGHT (246)

/**
 * default password, also used to enable super user mode through the I2C channel
 */
const uint8_t M24SR::DEFAULT_PASSWORD[16] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

/** @addtogroup M24SR_Driver
 * @{
 *	@brief  <b>This folder contains the driver layer of M24SR family (M24SR64, M24SR16, M24SR04, M24SR02)</b> 
 */

/** @defgroup drv_M24SR
 * @{
 *	@brief  This file contains the driver which implements all the M24SR commands.
 */

#ifndef errchk

/** value returned by the NFC chip when a command is successfully completed */
#define NFC_COMMAND_SUCCESS 0x9000

/** call the fCall function and check that the return status is M24SR_SUCCESS,
 *  otherwise return the error status*/
#define errchk(fCall) {\
	const int status = (int) (fCall); \
	if((status!=M24SR_SUCCESS)) { \
		return (M24SR::StatusTypeDef)status; \
	}\
}
#endif

/**
 * @brief  This function updates the CRC 
 * @param  None
 * @retval None
 */
 static uint16_t M24SR_UpdateCrc(uint8_t ch, uint16_t *lpwCrc) {
	ch = (ch ^ (uint8_t) ((*lpwCrc) & 0x00FF));
	ch = (ch ^ (ch << 4));
	*lpwCrc = (*lpwCrc >> 8) ^ ((uint16_t) ch << 8) ^ ((uint16_t) ch << 3) ^ ((uint16_t) ch >> 4);

	return (*lpwCrc);
}

/**
 * @brief  This function returns the CRC 16 
 * @param  Data : pointer on the data used to compute the CRC16
 * @param  Length : number of bytes of the data
 * @retval CRC16 
 */
 static uint16_t M24SR_ComputeCrc(uint8_t *Data, uint8_t Length) {
	uint8_t chBlock;
	uint16_t wCrc = 0x6363; // ITU-V.41

	do {
		chBlock = *Data++;
		M24SR_UpdateCrc(chBlock, &wCrc);
	} while (--Length);

	return wCrc;
}

/**  
 * @brief  	This function computes the CRC16 residue as defined by CRC ISO/IEC 13239
 * @param  	DataIn		:	input data 
 * @param	Length 		: 	Number of bits of DataIn
 * @retval 	Status (SW1&SW2)  	:   CRC16 residue is correct	
 * @retval 	M24SR_ERROR_CRC  	:  CRC16 residue is false
 */
 static M24SR::StatusTypeDef M24SR_IsCorrectCRC16Residue(uint8_t *DataIn, uint8_t Length) {
	uint16_t ResCRC = 0x0000;
	M24SR::StatusTypeDef status;
	/* check the CRC16 Residue */
	if (Length != 0) {
		ResCRC = M24SR_ComputeCrc(DataIn, Length);
	}

	if (ResCRC == 0x0000) {
		/* Good CRC, but error status from M24SR */
		status = (M24SR::StatusTypeDef) (((DataIn[Length - UB_STATUS_OFFSET] << 8)
				& 0xFF00) | (DataIn[Length - LB_STATUS_OFFSET] & 0x00FF));
	} else {
		ResCRC = 0x0000;
		ResCRC = M24SR_ComputeCrc(DataIn, 5);
		if (ResCRC != 0x0000) {
			/* Bad CRC */
			return M24SR::M24SR_IO_ERROR_CRC;
		} else {
			/* Good CRC, but error status from M24SR */
			status= (M24SR::StatusTypeDef) (((DataIn[1] << 8) & 0xFF00)
					| (DataIn[2] & 0x00FF));
		}
	}
	if (status==NFC_COMMAND_SUCCESS) {
		status =M24SR::M24SR_SUCCESS;
	}

	return status;
}

/**
 * @brief 		This functions creates an I block command according to the structures CommandStructure and Command.
 * @param	 	Command : structure which contains the field of the different parameters
 * @param	 	CommandStructure : structure of the command 
 * @param	 	NbByte : number of bytes of the command
 * @param	 	pCommand : pointer to the command created
 */
static void M24SR_BuildIBlockCommand(uint16_t CommandStructure, C_APDU *Command, uint8_t uDIDbyte, uint16_t *NbByte, uint8_t *pCommand) {
	uint16_t uCRC16;
	static uint8_t BlockNumber = 0x01;

	(*NbByte) = 0;

	/* add the PCD byte */
	if ((CommandStructure & M24SR_PCB_NEEDED) != 0) {
		/* toggle the block number */
		BlockNumber = TOGGLE(BlockNumber);
		/* Add the I block byte */
		pCommand[(*NbByte)++] = 0x02 | BlockNumber;
	}

	/* add the DID byte */
	if ((BlockNumber & M24SR_DID_NEEDED) != 0) {
		/* Add the I block byte */
		pCommand[(*NbByte)++] = uDIDbyte;
	}

	/* add the Class byte */
	if ((CommandStructure & M24SR_CLA_NEEDED) != 0) {
		pCommand[(*NbByte)++] = Command->Header.CLA;
	}
	/* add the instruction byte byte */
	if ((CommandStructure & M24SR_INS_NEEDED) != 0) {
		pCommand[(*NbByte)++] = Command->Header.INS;
	}
	/* add the Selection Mode byte */
	if ((CommandStructure & M24SR_P1_NEEDED) != 0) {
		pCommand[(*NbByte)++] = Command->Header.P1;
	}
	/* add the Selection Mode byte */
	if ((CommandStructure & M24SR_P2_NEEDED) != 0) {
		pCommand[(*NbByte)++] = Command->Header.P2;
	}
	/* add Data field lengthbyte */
	if ((CommandStructure & M24SR_LC_NEEDED) != 0) {
		pCommand[(*NbByte)++] = Command->Body.LC;
	}
	/* add Data field  */
	if ((CommandStructure & M24SR_DATA_NEEDED) != 0) {
		memcpy(&(pCommand[(*NbByte)]), Command->Body.pData, Command->Body.LC);
		(*NbByte) += Command->Body.LC;
	}
	/* add Le field  */
	if ((CommandStructure & M24SR_LE_NEEDED) != 0) {
		pCommand[(*NbByte)++] = Command->Body.LE;
	}
	/* add CRC field  */
	if ((CommandStructure & M24SR_CRC_NEEDED) != 0) {
		uCRC16 = M24SR_ComputeCrc(pCommand, (uint8_t) (*NbByte));
		/* append the CRC16 */
		pCommand[(*NbByte)++] = GETLSB(uCRC16);
		pCommand[(*NbByte)++] = GETMSB(uCRC16);
	}

}




/**  
 * @brief  	This function returns M24SR_STATUS_SUCCESS if the pBuffer is an s-block
 * @param  	pBuffer		:	pointer to the data
 * @retval 	M24SR_SUCCESS  :  the data is a S-Block
 * @retval 	NFC_ERROR  	:  the data is not a S-Block
 */
 static M24SR::StatusTypeDef IsSBlock(uint8_t *pBuffer) {

	if ((pBuffer[M24SR_OFFSET_PCB] & M24SR_MASK_BLOCK) == M24SR_MASK_SBLOCK) {
		return M24SR::M24SR_SUCCESS;
	} else {
		return M24SR::M24SR_ERROR;
	}

}

M24SR::M24SR(const uint8_t address, I2C &I2C,gpoEventCallback eventCallback, const PinName& GPOPinName,
		const PinName& RFDISPinName) :
		who_am_i(0),
		type(0),
		address(address),
		dev_I2C(I2C),
		GPOPin(GPOPinName),
		RFDisablePin(RFDISPinName),
		mCommunicationType(SYNC),
		mLastCommandSend(NONE),
		mGpoEventInterrupt(GPOPinName),
		mCallback(&defaultCallback),
		mComponentCallback(NULL),
		mNDefTagUtil(new NDefNfcTagM24SR(*this)),
		mManageGPOCallback(*this),
		mReadIDCallback(*this){
		//mNDefTagUtil(NULL){
	memset(uM24SRbuffer, 0, 0xFF * sizeof(int8_t));
	uDIDbyte = 0;
	if (RFDisablePin.is_connected()!=0) {
		RFDisablePin = 0;
	}
	if(GPOPin.is_connected()!=0){
		if(eventCallback!=NULL)
			mGpoEventInterrupt.fall(eventCallback);
		mGpoEventInterrupt.mode(PullUp);
		mGpoEventInterrupt.disable_irq();
	}
}

M24SR::~M24SR(){
	delete mNDefTagUtil;
}

/**
 * @brief  This function sends the FWT extension command (S-Block format)
 * @param	FWTbyte : FWT value
 * @return M24SR_SUCCESS if no errors
 */
M24SR::StatusTypeDef M24SR::M24SR_SendFWTExtension(uint8_t FWTbyte) {
	uint8_t pBuffer[M24SR_STATUSRESPONSE_NBBYTE];
	M24SR::StatusTypeDef status;
	uint8_t NthByte = 0;
	uint16_t uCRC16;

	/* create the response */
	pBuffer[NthByte++] = 0xF2;
	pBuffer[NthByte++] = FWTbyte;
	/* compute the CRC */
	uCRC16 = M24SR_ComputeCrc(pBuffer, 0x02);
	/* append the CRC16 */
	pBuffer[NthByte++] = GETLSB(uCRC16);
	pBuffer[NthByte++] = GETMSB(uCRC16);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NthByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		return status;
	}

	mLastCommandSend=UPDATE;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveUpdateBinary();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_updated_binary(this,status,mLastCommandData.offset, mLastCommandData.data,mLastCommandData.length);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

/**
 * @brief  This function initialize the M24SR device
 * @retval None
 */
M24SR::StatusTypeDef M24SR::M24SR_Init(M24SR_InitTypeDef *notUsed) {
	(void) notUsed;
	//force to open a i2c session
	StatusTypeDef status = M24SR_ForceSession();
	if(status!= M24SR_SUCCESS) {
		return status;
	}
	//leave the gpo always up
	if(GPOPin.is_connected()!=0) {
		status = M24SR_ManageI2CGPO(DEFAULT_GPO_STATUS);
		if(status!= M24SR_SUCCESS)
			return status;
	}
	if(RFDisablePin.is_connected()!=0) {
		status = M24SR_ManageRFGPO(DEFAULT_GPO_STATUS);
		if(status!= M24SR_SUCCESS)
			return status;
	}
	//close the session
	status = M24SR_Deselect();
	if (status!= M24SR_SUCCESS) {
		return status;
	}
	if(GPOPin.is_connected()!=0) {
		mGpoEventInterrupt.enable_irq();
	}
	return M24SR_SUCCESS;
}


/**
 * @brief  This function sends the KillSession command to the M24SR device
 * @param  None
 * @return M24SR_SUCCESS if no errors
 */
M24SR::StatusTypeDef M24SR::M24SR_ForceSession(void) {
	uint8_t commandBuffer[] = M24SR_KILLSESSION_COMMAND;
	M24SR::StatusTypeDef status;
	status = M24SR_IO_SendI2Ccommand(sizeof(commandBuffer), commandBuffer);
	if(status!=M24SR_SUCCESS) {
		mCallback->on_session_open(this,status);
		return status;
	}

	/* Insure no access will be done just after open session */
	/* The only way here is to poll I2C to know when M24SR is ready */
	/* GPO can not be use with KillSession command */
	status = M24SR_IO_PollI2C();

	getCallback()->on_session_open(this,status);
	return status;

}

/**
 * @brief  This function sends the Deselect command (S-Block format)
 * @return M24SR_SUCCESS if no errors
 */
M24SR::StatusTypeDef M24SR::M24SR_Deselect(void) {
	uint8_t pBuffer[] = M24SR_DESELECTREQUEST_COMMAND;
	M24SR::StatusTypeDef status;
	/* send the request */
	status = M24SR_IO_SendI2Ccommand(sizeof(pBuffer), pBuffer);
	if(status!=M24SR_SUCCESS) {
		getCallback()->on_deselect(this,status);
	}

	mLastCommandSend=DESELECT;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if(status == M24SR_SUCCESS) {
			return M24SR_ReceiveDeselect();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_selected_application(this,status);
			return status;
		}//if-else

	}

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveDeselect(void) {
	uint8_t pBuffer[4];
	M24SR::StatusTypeDef status;
	status = M24SR_IO_ReceiveI2Cresponse(sizeof(pBuffer), pBuffer);
	getCallback()->on_deselect(this,status);
	return status;
}

/**
 * @brief  This function sends the GetSession command to the M24SR device
 * @retval M24SR_SUCCESS the function is successful.
 * @retval Status (SW1&SW2) if operation does not complete.
 */
M24SR::StatusTypeDef M24SR::M24SR_GetSession(void) {
	uint8_t commandBuffer[] = M24SR_OPENSESSION_COMMAND;

	M24SR::StatusTypeDef status;
	status = M24SR_IO_SendI2Ccommand(sizeof(commandBuffer), commandBuffer);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_session_open(this,status);
		return status;
	}

	/* Insure no access will be done just after open session */
	/* The only way here is to poll I2C to know when M24SR is ready */
	/* GPO can not be use with KillSession command */
	status = M24SR_IO_PollI2C();

	getCallback()->on_session_open(this,status);
	return status;
}

/**
 * @brief  This function sends the SelectApplication command
 * @return M24SR_SUCCESS if no errors
 */
M24SR::StatusTypeDef M24SR::M24SR_SendSelectApplication(void) {

	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint8_t pDataOut[] = M24SR_SELECTAPPLICATION_COMMAND;
	uint8_t uLe = 0x00;
	uint16_t uP1P2 =0x0400,	NbByte;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_SELECT_FILE;
	/* copy the offset */
	command.Header.P1 = GETMSB(uP1P2);
	command.Header.P2 = GETLSB(uP1P2);
	/* copy the number of byte of the data field */
	command.Body.LC = sizeof(pDataOut);
	/* copy the data */
	command.Body.pData = pDataOut;
	/* copy the number of byte to read */
	command.Body.LE = uLe;
	/* build the I2C command */
	M24SR_BuildIBlockCommand( M24SR_CMDSTRUCT_SELECTAPPLICATION, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_selected_application(this,status);
		return status;
	}

	mLastCommandSend=SELECT_APPLICATION;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveSelectApplication();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_selected_application(this,status);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveSelectApplication(void) {
	uint8_t pDataIn[M24SR_STATUSRESPONSE_NBBYTE];
	M24SR::StatusTypeDef status;

	mLastCommandSend = NONE;

	status = M24SR_IO_ReceiveI2Cresponse(sizeof(pDataIn), pDataIn);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_selected_application(this,status);
		return status;
	}//else
	status = M24SR_IsCorrectCRC16Residue(pDataIn, sizeof(pDataIn));
	getCallback()->on_selected_application(this,status);

	return status;
}

M24SR::StatusTypeDef M24SR::M24SR_ReadID(uint8_t *nfc_id) {
	if (!nfc_id) {
		return M24SR_ERROR;
	}

	//enable the callback for change the gpo
	mComponentCallback = &mReadIDCallback;
	mReadIDCallback.read_id_on(nfc_id);

	//start the readID procedure
	return M24SR_SendSelectApplication();
}

/**
 * @brief  This function sends the SelectCCFile command
 * @retval M24SR_SUCCESS the function is successful.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 * @retval Status (SW1&SW2)   if operation does not complete for another reason.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendSelectCCfile(void) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint8_t pDataOut[] = CC_FILE_ID_BYTES;
	uint16_t uP1P2 =0x000C,
	NbByte;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_SELECT_FILE;
	/* copy the offset */
	command.Header.P1 = GETMSB(uP1P2);
	command.Header.P2 = GETLSB(uP1P2);
	/* copy the number of byte of the data field */
	command.Body.LC = sizeof(pDataOut);
	command.Body.pData = pDataOut;
	/* build the I2C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_SELECTCCFILE, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if(status!=M24SR_SUCCESS) {
		getCallback()->on_selected_CC_file(this,status);
		return status;
	}//else

	mLastCommandSend=SELECT_CC_FILE;

	if (mCommunicationType==M24SR::SYNC){
		status = M24SR_IO_PollI2C();
		if (status==M24SR_SUCCESS) {
			return M24SR_ReceiveSelectCCfile();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_selected_CC_file(this,status);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveSelectCCfile(void){

	uint8_t pDataIn[M24SR_STATUSRESPONSE_NBBYTE];
	M24SR::StatusTypeDef status;

	mLastCommandSend = NONE;

	status = M24SR_IO_ReceiveI2Cresponse(sizeof(pDataIn), pDataIn);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_selected_CC_file(this,status);
		return status;
	}//else
	status = M24SR_IsCorrectCRC16Residue(pDataIn, sizeof(pDataIn));
	getCallback()->on_selected_CC_file(this,status);

	return status;
}

/**
 * @brief  This function sends the SelectSystemFile command
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendSelectSystemfile(void) {
	C_APDU command;

	uint8_t *pBuffer = uM24SRbuffer;
	uint8_t pDataOut[] = SYSTEM_FILE_ID_BYTES;
	M24SR::StatusTypeDef status;
	uint16_t uP1P2 =0x000C,	NbByte;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_SELECT_FILE;
	/* copy the offset */
	command.Header.P1 = GETMSB(uP1P2);
	command.Header.P2 = GETLSB(uP1P2);
	/* copy the number of byte of the data field */
	command.Body.LC = sizeof(pDataOut);
	command.Body.pData = pDataOut;
	/* build the I²C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_SELECTCCFILE, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_selected_system_file(this,status);
		return status;
	}//else

	mLastCommandSend=SELECT_SYSTEM_FILE;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveSelectSystemfile();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_selected_system_file(this,status);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveSelectSystemfile() {
	uint8_t pDataIn[M24SR_STATUSRESPONSE_NBBYTE];
	M24SR::StatusTypeDef status;

	mLastCommandSend = NONE;

	status = M24SR_IO_ReceiveI2Cresponse(sizeof(pDataIn), pDataIn);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_selected_system_file(this,status);
		return status;
	}//else
	status = M24SR_IsCorrectCRC16Residue(pDataIn, sizeof(pDataIn));
	getCallback()->on_selected_system_file(this,status);

	return status;
}

/**
 * @brief  This function sends the SelectNDEFfile command
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendSelectNDEFfile(uint16_t NDEFfileId) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint8_t pDataOut[] = { GETMSB(NDEFfileId), GETLSB(NDEFfileId) };
	uint16_t uP1P2 = 0x000C, NbByte;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_SELECT_FILE;
	/* copy the offset */
	command.Header.P1 = GETMSB(uP1P2);
	command.Header.P2 = GETLSB(uP1P2);
	/* copy the number of byte of the data field */
	command.Body.LC = sizeof(pDataOut);
	command.Body.pData = pDataOut;
	/* copy the offset */
	/* build the I2C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_SELECTNDEFFILE, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
    if (status!=M24SR_SUCCESS) {
	    return status;
    }
	mLastCommandSend=SELECT_NDEF_FILE;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status==M24SR_SUCCESS) {
			return M24SR_ReceiveSelectNDEFfile();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_selected_NDEF_file(this,status);
			return status;
		}
	}

	return M24SR_SUCCESS;

}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveSelectNDEFfile(){

	uint8_t pDataIn[M24SR_STATUSRESPONSE_NBBYTE];
	M24SR::StatusTypeDef status;

	mLastCommandSend = NONE;

	status = M24SR_IO_ReceiveI2Cresponse(sizeof(pDataIn), pDataIn);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_selected_NDEF_file(this,status);
		return status;
	}//else
	status= M24SR_IsCorrectCRC16Residue(pDataIn, sizeof(pDataIn));
	getCallback()->on_selected_NDEF_file(this,status);

	return status;
}

/**
 * @brief  This function sends a read binary command
 * @param	Offset   first byte to read
 * @param	NbByteToRead   number of bytes to read
 * @param	pBufferRead   pointer to the buffer read from the M24SR device
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendReadBinary(uint16_t Offset, uint8_t NbByteToRead, uint8_t *pBufferRead) {
	//clamp the buffer to the max size
	if (NbByteToRead>M24SR_MAX_BYTE_OPERATION_LENGHT) {
		NbByteToRead=M24SR_MAX_BYTE_OPERATION_LENGHT;
	}

	C_APDU command;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;
	M24SR::StatusTypeDef status;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_READ_BINARY;
	/* copy the offset */
	command.Header.P1 = GETMSB(Offset);
	command.Header.P2 = GETLSB(Offset);
	/* copy the number of byte to read */
	command.Body.LE = NbByteToRead;

	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_READBINARY, &command, uDIDbyte, &NbByte, pBuffer);

	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_read_byte(this,status,Offset,pBufferRead,NbByteToRead);
		return status;
	}

	mLastCommandSend=READ;
	mLastCommandData.data=pBufferRead;
	mLastCommandData.length=NbByteToRead;
	mLastCommandData.offset=Offset;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status==M24SR_SUCCESS) {
			return M24SR_ReceiveReadBinary();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_read_byte(this,status,Offset,pBufferRead,NbByteToRead);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveReadBinary() {
	M24SR::StatusTypeDef status;
	const uint16_t length = mLastCommandData.length;
	const uint16_t offset = mLastCommandData.offset;
	uint8_t *data = mLastCommandData.data;

	mLastCommandSend = NONE;

	status = M24SR_IO_ReceiveI2Cresponse (length + M24SR_STATUSRESPONSE_NBBYTE , uM24SRbuffer );
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_read_byte(this,status,offset,data,length);
		return status;
	}
	status = M24SR_IsCorrectCRC16Residue(uM24SRbuffer, length + M24SR_STATUSRESPONSE_NBBYTE);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_read_byte(this,status,offset,data,length);
	} else{
		/* retrieve the data without SW1 & SW2 as provided as return value of the function */
		memcpy(mLastCommandData.data, &uM24SRbuffer[1], length);
		getCallback()->on_read_byte(this,status,offset,data,length);
	}

	return status;
}

/**
 * @brief  This function sends a ST read binary command (no error if access is not inside NDEF file)
 * @param	Offset   first byte to read
 * @param	NbByteToRead number of bytes to read
 * @param	pBufferRead  pointer to the buffer read from the M24SR device
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendSTReadBinary(uint16_t Offset, uint8_t NbByteToRead, uint8_t *pBufferRead) {
	//clamp the buffer to the max size
	if (NbByteToRead>M24SR_MAX_BYTE_OPERATION_LENGHT) {
		NbByteToRead=M24SR_MAX_BYTE_OPERATION_LENGHT;
	}

	C_APDU command;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;
	M24SR::StatusTypeDef status;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_ST;
	command.Header.INS = C_APDU_READ_BINARY;
	/* copy the offset */
	command.Header.P1 = GETMSB(Offset);
	command.Header.P2 = GETLSB(Offset);
	/* copy the number of byte to read */
	command.Body.LE = NbByteToRead;

	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_READBINARY, &command, uDIDbyte, &NbByte, pBuffer);

	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_read_byte(this,status,Offset,pBufferRead,NbByteToRead);
		return status;
	}

	mLastCommandSend=READ;
	mLastCommandData.data=pBufferRead;
	mLastCommandData.length=NbByteToRead;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status==M24SR_SUCCESS) {
			return M24SR_ReceiveReadBinary();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_read_byte(this,status,Offset,pBufferRead,NbByteToRead);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

/**
 * @brief  This function sends a Update binary command
 * @param	Offset   first byte to read
 * @param	NbByteToWrite   number of bytes to write
 * @param	pBufferRead   pointer to the buffer read from the M24SR device
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendUpdateBinary(uint16_t Offset, uint8_t NbByteToWrite, uint8_t *pDataToWrite) {
	//clamp the buffer to the max size
	if (NbByteToWrite>M24SR_MAX_BYTE_OPERATION_LENGHT) {
		NbByteToWrite=M24SR_MAX_BYTE_OPERATION_LENGHT;
	}

	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_UPDATE_BINARY;
	/* copy the offset */
	command.Header.P1 = GETMSB(Offset);
	command.Header.P2 = GETLSB(Offset);
	/* copy the number of byte of the data field */
	command.Body.LC = NbByteToWrite;
	command.Body.pData = pDataToWrite;
	/* copy the File Id */
	//memcpy(command.Body.pData ,pDataToWrite, NbByteToWrite );
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_UPDATEBINARY, &command, uDIDbyte, &NbByte, pBuffer);

	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status!=M24SR_SUCCESS){
		getCallback()->on_updated_binary(this,status,Offset,pDataToWrite,NbByteToWrite);
		return status;
	}

	mLastCommandSend=UPDATE;
	mLastCommandData.data=pDataToWrite;
	mLastCommandData.length=NbByteToWrite;
	mLastCommandData.offset=Offset;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status==M24SR_SUCCESS) {
			return M24SR_ReceiveUpdateBinary();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_updated_binary(this,status,Offset,pDataToWrite,NbByteToWrite);
			return status;
		}//if-else
	}

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveUpdateBinary() {
	uint8_t respBuffer[M24SR_STATUSRESPONSE_NBBYTE];
	M24SR::StatusTypeDef status;
	const uint16_t length = mLastCommandData.length;
	uint8_t *data = mLastCommandData.data;
	const uint16_t offset = mLastCommandData.offset;

	mLastCommandSend=NONE;

	status= M24SR_IO_ReceiveI2Cresponse (sizeof(respBuffer) , respBuffer);
	if(status != M24SR_SUCCESS){
		getCallback()->on_updated_binary(this,status,offset,data,length);
		return status;
	}

	if (IsSBlock(respBuffer) == M24SR_SUCCESS) {
		/*check the CRC */
		status = M24SR_IsCorrectCRC16Residue(respBuffer, M24SR_WATINGTIMEEXTRESPONSE_NBBYTE);
		// TODO: why if we check ==NFC_Commandsuccess it fail?
		if (status != M24SR_IO_ERROR_CRC) {
			/* send the FrameExension response*/
			status = M24SR_SendFWTExtension(respBuffer[M24SR_OFFSET_PCB + 1]);
			if(status!=M24SR_SUCCESS){ //something get wrong -> abort the update
				getCallback()->on_updated_binary(this,status,offset,data,length);
			}//status
		}//if
	} else { //isSBlock
		status = M24SR_IsCorrectCRC16Residue(respBuffer, M24SR_STATUSRESPONSE_NBBYTE);
		getCallback()->on_updated_binary(this,status,offset,data,length);
	}//if else

	return status;
}//M24SR_ReceiveUpdateBinary

/**
 * @brief  This function sends the Verify command
 * @param	uPwdId   PasswordId ( 0x0001 : Read NDEF pwd or 0x0002 : Write NDEF pwd or 0x0003 : I2C pwd)
 * @param	NbPwdByte   Number of bytes ( 0x00 or 0x10)
 * @param	pPwd   pointer to the password
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendVerify(uint16_t uPwdId, uint8_t NbPwdByte, const uint8_t *pPwd) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/*check the parameters */
	if ((uPwdId > 0x0003)|| ((NbPwdByte != 0x00) && (NbPwdByte != 0x10))) {
		getCallback()->on_verified(this,M24SR_IO_ERROR_PARAMETER,constToPasswordType(uPwdId),pPwd);
		return M24SR_IO_ERROR_PARAMETER;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_VERIFY;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uPwdId);
	command.Header.P2 = GETLSB(uPwdId);
	/* copy the number of bytes of the data field */
	command.Body.LC = NbPwdByte;

	if (NbPwdByte == 0x10) {
		/* copy the password */
		command.Body.pData = pPwd;
		/* build the I2C command */
		M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_VERIFYBINARYWITHPWD, &command, uDIDbyte, &NbByte, pBuffer);
	} else {
		command.Body.pData = NULL;
		/* build the I2C command */
		M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_VERIFYBINARYWOPWD, &command, uDIDbyte, &NbByte, pBuffer);
	}

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_verified(this,status,constToPasswordType(uPwdId),pPwd);
		return status;
	}
	mLastCommandSend=VERIFY;
	mLastCommandData.data=(uint8_t*)pPwd;
	mLastCommandData.offset=uPwdId;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if(status == M24SR_SUCCESS) {
			return M24SR_ReceiveVerify();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_verified(this,status,constToPasswordType(uPwdId),pPwd);
			return status;
		}
	}

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveVerify() {
	M24SR::StatusTypeDef status;
	uint8_t respBuffer[M24SR_STATUSRESPONSE_NBBYTE];
	mLastCommandSend=NONE;

	const uint8_t *data = mLastCommandData.data;
	const PasswordType_t type = constToPasswordType(mLastCommandData.offset);

	status=M24SR_IO_ReceiveI2Cresponse (sizeof(respBuffer),respBuffer);

	if (status !=M24SR_SUCCESS) {
		getCallback()->on_verified(this,status,type,data);
		return status;
	}

	status = M24SR_IsCorrectCRC16Residue(respBuffer, M24SR_STATUSRESPONSE_NBBYTE);
	getCallback()->on_verified(this,status,type,data);
	return status;
}

/**
 * @brief  This function sends the ChangeReferenceData command
 * @param	uPwdId   PasswordId ( 0x0001 : Read NDEF pwd or 0x0002 : Write NDEF pwd or 0x0003 : I2C pwd)
 * @param	pPwd   pointer to the passwaord
 * @retval Status (SW1&SW2) Satus of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendChangeReferenceData(uint16_t uPwdId, uint8_t *pPwd) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/*check the parameters */
	if (uPwdId > 0x0003) {
		getCallback()->on_change_reference_data(this,M24SR_IO_ERROR_PARAMETER, constToPasswordType(uPwdId), pPwd);
		return M24SR_IO_ERROR_PARAMETER;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_CHANGE;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uPwdId);
	command.Header.P2 = GETLSB(uPwdId);
	/* copy the number of byte of the data field */
	command.Body.LC = M24SR_PASSWORD_NBBYTE;
	/* copy the password */
	command.Body.pData = pPwd;
	/* build the I²C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_CHANGEREFDATA, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_change_reference_data(this,status, constToPasswordType(uPwdId), pPwd);
		return status;
	}

	mLastCommandSend = CHANGE_REFERENCE_DATA;
	mLastCommandData.data = pPwd;
	//use the offset filed for store the pwd id;
	mLastCommandData.offset = (uint8_t)uPwdId;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveChangeReferenceData();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_change_reference_data(this, status, constToPasswordType(uPwdId), pPwd);
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveChangeReferenceData(){
	M24SR::StatusTypeDef status;
	//TODO the size is 3?
	uint8_t rensponseBuffer[M24SR_STATUSRESPONSE_NBBYTE];

	PasswordType_t type = constToPasswordType(mLastCommandData.offset);
	uint8_t *data = mLastCommandData.data;

	status = M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , rensponseBuffer );
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_change_reference_data(this,status,type,data);
		return status;
	}//else

	status = M24SR_IsCorrectCRC16Residue(rensponseBuffer, M24SR_STATUSRESPONSE_NBBYTE);
	getCallback()->on_change_reference_data(this,status,type,data);
	return status;
}

/**
 * @brief  This function sends the EnableVerificationRequirement command
 * @param	uReadOrWrite enable the read or write protection ( 0x0001 : Read or 0x0002 : Write  )
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendEnableVerificationRequirement(uint16_t uReadOrWrite) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/*check the parameters */
	if ((uReadOrWrite != 0x0001) && (uReadOrWrite != 0x0002)) {
		getCallback()->on_enable_verification_requirement(this,M24SR_IO_ERROR_PARAMETER, constToPasswordType(uReadOrWrite));
		return M24SR_IO_ERROR_PARAMETER;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_ENABLE;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uReadOrWrite);
	command.Header.P2 = GETLSB(uReadOrWrite);
	/* build the I2C command */
	M24SR_BuildIBlockCommand( M24SR_CMDSTRUCT_ENABLEVERIFREQ, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_enable_verification_requirement(this, status, constToPasswordType(uReadOrWrite));
		return status;
	}//if

	mLastCommandSend = ENABLE_VERIFICATION_REQUIREMENT;
	//use the offset filed for store the pwd id;
	mLastCommandData.offset = (uint8_t)uReadOrWrite;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveEnableVerificationRequirement();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_enable_verification_requirement(this, status, constToPasswordType(uReadOrWrite));
			return status;
		}//if-else
	}//if

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveEnableVerificationRequirement(){
	M24SR::StatusTypeDef status;
	//TODO the size is 3?
	uint8_t rensponseBuffer[M24SR_STATUSRESPONSE_NBBYTE];

	const PasswordType_t type = constToPasswordType(mLastCommandData.offset);

	status = M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , rensponseBuffer );
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_enable_verification_requirement(this,status,type);
		return status;
	}//else

	status = M24SR_IsCorrectCRC16Residue(rensponseBuffer, M24SR_STATUSRESPONSE_NBBYTE);
	getCallback()->on_enable_verification_requirement(this,status,type);
	return status;
}

/**
 * @brief  This function sends the DisableVerificationRequirement command
 * @param	uReadOrWrite enable the read or write protection ( 0x0001 : Read or 0x0002 : Write  )
 * @retval Status (SW1&SW2)   Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendDisableVerificationRequirement(uint16_t uReadOrWrite) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/*check the parameters */
	if ((uReadOrWrite != 0x0001) && (uReadOrWrite != 0x0002)) {
		getCallback()->on_disable_verification_requirement(this,M24SR_IO_ERROR_PARAMETER, constToPasswordType(uReadOrWrite));
		return M24SR_IO_ERROR_PARAMETER;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_DEFAULT;
	command.Header.INS = C_APDU_DISABLE;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uReadOrWrite);
	command.Header.P2 = GETLSB(uReadOrWrite);
	/* build the I²C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_DISABLEVERIFREQ, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_disable_verification_requirement(this, status, constToPasswordType(uReadOrWrite));
		return status;
	}

	mLastCommandSend = DISABLE_VERIFICATION_REQUIREMENT;
	//use the offset filed for store the pwd id;
	mLastCommandData.offset = (uint8_t)uReadOrWrite;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status==M24SR_SUCCESS) {
			return M24SR_ReceiveDisableVerificationRequirement();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_disable_verification_requirement(this, status, constToPasswordType(uReadOrWrite));
			return status;
		}//if-else
	}

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveDisableVerificationRequirement() {
	M24SR::StatusTypeDef status;
	//TODO the size is 3?
	uint8_t rensponseBuffer[M24SR_STATUSRESPONSE_NBBYTE];

	PasswordType_t type = constToPasswordType(mLastCommandData.offset);

	status = M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , rensponseBuffer );
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_disable_verification_requirement(this,status,type);
		return status;
	}//else

	status = M24SR_IsCorrectCRC16Residue(rensponseBuffer, M24SR_STATUSRESPONSE_NBBYTE);
	getCallback()->on_disable_verification_requirement(this,status,type);
	return status;
}

/**
 * @brief  This function sends the EnablePermananentState command
 * @param	uReadOrWrite   enable the read or write protection ( 0x0001 : Read or 0x0002 : Write  )
 * @retval Status (SW1&SW2)   Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendEnablePermanentState(uint16_t uReadOrWrite) {
	C_APDU command;
	M24SR::StatusTypeDef status;

	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/*check the parameters */
	if ((uReadOrWrite != 0x0001) && (uReadOrWrite != 0x0002)) {
		getCallback()->on_enable_permanent_state(this, M24SR_IO_ERROR_PARAMETER, constToPasswordType(uReadOrWrite));
		return M24SR_IO_ERROR_PARAMETER;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_ST;
	command.Header.INS = C_APDU_ENABLE;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uReadOrWrite);
	command.Header.P2 = GETLSB(uReadOrWrite);
	/* build the I2C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_ENABLEVERIFREQ, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_enable_permanent_state(this, status, constToPasswordType(uReadOrWrite));
		return status;
	}

	mLastCommandSend = ENABLE_PERMANET_STATE;
	//use the offset filed for store the pwd id;
	mLastCommandData.offset = (uint8_t)uReadOrWrite;

	if (mCommunicationType==M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveEnablePermanentState();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_enable_permanent_state(this, status, constToPasswordType(uReadOrWrite));
			return status;
		}//if-else
	}

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveEnablePermanentState() {
	M24SR::StatusTypeDef status;
	//TODO the size is 3?
	uint8_t rensponseBuffer[M24SR_STATUSRESPONSE_NBBYTE];

	PasswordType_t type = constToPasswordType(mLastCommandData.offset);

	status = M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , rensponseBuffer );
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_enable_permanent_state(this,status,type);
		return status;
	}//else

	status = M24SR_IsCorrectCRC16Residue(rensponseBuffer, M24SR_STATUSRESPONSE_NBBYTE);
	getCallback()->on_enable_permanent_state(this,status,type);
	return status;
}

/**
 * @brief  This function sends the DisablePermanentState command
 * @param	uReadOrWrite enable the read or write protection ( 0x0001 : Read or 0x0002 : Write  )
 * @retval Status (SW1&SW2)   Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendDisablePermanentState(uint16_t uReadOrWrite) {
	C_APDU command;
	M24SR::StatusTypeDef status;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t NbByte;

	/*check the parameters */
	if ((uReadOrWrite != 0x0001) && (uReadOrWrite != 0x0002)) {
		getCallback()->on_disable_permanent_state(this, M24SR_IO_ERROR_PARAMETER, constToPasswordType(uReadOrWrite));
		return M24SR_IO_ERROR_PARAMETER;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_ST;
	command.Header.INS = C_APDU_DISABLE;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uReadOrWrite);
	command.Header.P2 = GETLSB(uReadOrWrite);
	/* build the I2C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_DISABLEVERIFREQ, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	status = M24SR_IO_SendI2Ccommand(NbByte, pBuffer);
	if (status != M24SR_SUCCESS) {
		getCallback()->on_enable_permanent_state(this, status, constToPasswordType(uReadOrWrite));
		return status;
	}

	mLastCommandSend = DISABLE_PERMANET_STATE;
	//use the offset filed for store the pwd id;
	mLastCommandData.offset = (uint8_t)uReadOrWrite;

	if (mCommunicationType == M24SR::SYNC) {
		status = M24SR_IO_PollI2C();
		if (status == M24SR_SUCCESS) {
			return M24SR_ReceiveDisablePermanentState();
		} else {
			mLastCommandSend = NONE;
			getCallback()->on_disable_permanent_state(this, status, constToPasswordType(uReadOrWrite));
			return status;
		}//if-else
	}

	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_ReceiveDisablePermanentState() {
	M24SR::StatusTypeDef status;
	//TODO the size is 3?
	uint8_t rensponseBuffer[M24SR_STATUSRESPONSE_NBBYTE];

	PasswordType_t type = constToPasswordType(mLastCommandData.offset);

	status = M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , rensponseBuffer );
	if (status!=M24SR_SUCCESS) {
		getCallback()->on_disable_permanent_state(this,status,type);
		return status;
	}//else

	status = M24SR_IsCorrectCRC16Residue(rensponseBuffer, M24SR_STATUSRESPONSE_NBBYTE);
	getCallback()->on_disable_permanent_state(this,status,type);
	return status;
}

/**
 * @brief  This function generates an interrupt on GPO pin
 * @param	None
 * @retval Status (SW1&SW2)   Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_SendInterrupt(void) {
	C_APDU command;

	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t uP1P2 = 0x001E;
	uint16_t NbByte;


	StatusTypeDef status = M24SR_ManageI2CGPO(INTERRUPT);
	if (status!=M24SR_SUCCESS) {
		return status;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_ST;
	command.Header.INS = C_APDU_INTERRUPT;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uP1P2);
	command.Header.P2 = GETLSB(uP1P2);
	command.Body.LC = 0x00;
	/* build the I2C command */
	M24SR_BuildIBlockCommand(M24SR_CMDSTRUCT_SENDINTERRUPT, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	errchk(M24SR_IO_SendI2Ccommand(NbByte, pBuffer));
	errchk(M24SR_IO_PollI2C());
	/* read the response */
	errchk(M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , pBuffer ));

	return M24SR_IsCorrectCRC16Residue(pBuffer, M24SR_STATUSRESPONSE_NBBYTE);

}

/**
 * @brief  This function forces GPO pin to low state or high Z
 * @param	uSetOrReset select if GPO must be low (reset) or HiZ
 * @retval Status (SW1&SW2) Status of the operation to complete.
 * @retval M24SR_ERROR_I2CTIMEOUT I2C timeout occurred.
 */
M24SR::StatusTypeDef M24SR::M24SR_StateControl(uint8_t uSetOrReset) {
	C_APDU command;
	uint8_t *pBuffer = uM24SRbuffer;
	uint16_t uP1P2 = 0x001F;
	uint16_t NbByte;

	/*check the parameters */
	if ((uSetOrReset != 0x01) && (uSetOrReset != 0x00)) {
		return M24SR_IO_ERROR_PARAMETER;
	}


	StatusTypeDef status = M24SR_ManageI2CGPO(STATE_CONTROL);
	if (status == M24SR_SUCCESS) {
		return status;
	}

	/* build the command */
	command.Header.CLA = C_APDU_CLA_ST;
	command.Header.INS = C_APDU_INTERRUPT;
	/* copy the Password Id */
	command.Header.P1 = GETMSB(uP1P2);
	command.Header.P2 = GETLSB(uP1P2);
	command.Body.LC = 0x01;
	command.Body.pData = &uSetOrReset;
	/* copy the data */
	//memcpy(command.Body.pData , &uSetOrReset, 0x01 );
	//command.Body.LE = 0x00 ;
	/* build the I2C command */
	M24SR_BuildIBlockCommand( M24SR_CMDSTRUCT_GPOSTATE, &command, uDIDbyte, &NbByte, pBuffer);

	/* send the request */
	errchk(M24SR_IO_SendI2Ccommand(NbByte, pBuffer));
	errchk(M24SR_IO_PollI2C());
	/* read the response */
	errchk(M24SR_IO_ReceiveI2Cresponse (M24SR_STATUSRESPONSE_NBBYTE , pBuffer ));

	return M24SR_IsCorrectCRC16Residue(pBuffer, M24SR_STATUSRESPONSE_NBBYTE);
}

M24SR::StatusTypeDef M24SR::M24SR_ManageI2CGPO(NFC_GPO_MGMT GPO_I2Cconfig) {

	if (GPOPin.is_connected() == 0) {
		return M24SR_IO_PIN_NOT_CONNECTED;
	}
	if (GPO_I2Cconfig > STATE_CONTROL) {
		return M24SR_IO_ERROR_PARAMETER;
	}

	//enable the callback for change the gpo
	mComponentCallback = &mManageGPOCallback;
	mManageGPOCallback.set_new_GPO_config(true,GPO_I2Cconfig);

	//start the manageGPO procedure
	return M24SR_SendSelectApplication();
}

M24SR::StatusTypeDef M24SR::M24SR_ManageRFGPO(NFC_GPO_MGMT GPO_I2Cconfig) {

	if(RFDisablePin.is_connected()==0) {
		return M24SR_IO_PIN_NOT_CONNECTED;
	}
	if (GPO_I2Cconfig > STATE_CONTROL) {
		return M24SR_IO_ERROR_PARAMETER;
	}

	//enable the callback for change the gpo
	mComponentCallback = &mManageGPOCallback;
	mManageGPOCallback.set_new_GPO_config(false,GPO_I2Cconfig);

	//start the manageGPO procedure
	return M24SR_SendSelectApplication();
}

M24SR::StatusTypeDef M24SR::M24SR_RFConfig(uint8_t OnOffChoice) {
	if (RFDisablePin.is_connected()==0) {
		return M24SR_IO_PIN_NOT_CONNECTED;
	}
	/* Disable RF */
	if (OnOffChoice != 0) {
		M24SR_IO_RFDIS_WritePin(GPIO_PIN_RESET);
	} else {
		M24SR_IO_RFDIS_WritePin(GPIO_PIN_SET);
	}
	return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::M24SR_IO_SendI2Ccommand(uint8_t NbByte, uint8_t *pBuffer) {
	int ret = dev_I2C.write(address, (char*) pBuffer, NbByte);
	if (ret == 0) {
		return M24SR_SUCCESS;
	}
	return M24SR_IO_ERROR_I2CTIMEOUT;
}

M24SR::StatusTypeDef M24SR::M24SR_IO_ReceiveI2Cresponse(uint8_t NbByte, uint8_t *pBuffer) {
	int ret = dev_I2C.read(address, (char*) pBuffer, NbByte);
	if (ret == 0) {
		return M24SR_SUCCESS;
	}

	return M24SR_IO_ERROR_I2CTIMEOUT;
}

M24SR::StatusTypeDef M24SR::M24SR_IO_PollI2C(void) {

    int status = 1;
    while (status != 0 ) {
        //send the device address and wait to recevie an ack bit
        status = dev_I2C.write(address,NULL,0);
    }
    return M24SR_SUCCESS;
}

M24SR::StatusTypeDef M24SR::manage_event(void){

	switch(mLastCommandSend) {
		case SELECT_APPLICATION:
			return M24SR_ReceiveSelectApplication();
		case SELECT_CC_FILE:
			return M24SR_ReceiveSelectCCfile();
		case SELECT_NDEF_FILE:
			return M24SR_ReceiveSelectNDEFfile();
		case SELECT_SYSTEM_FILE:
			return M24SR_ReceiveSelectSystemfile();
		case READ:
			return M24SR_ReceiveReadBinary();
		case UPDATE:
			return M24SR_ReceiveUpdateBinary();
		case VERIFY:
			return M24SR_ReceiveVerify();
		case DESELECT:
			return M24SR_ReceiveDeselect();
		case CHANGE_REFERENCE_DATA:
			return M24SR_ReceiveChangeReferenceData();
		case ENABLE_VERIFICATION_REQUIREMENT:
			return M24SR_ReceiveEnableVerificationRequirement();
		case DISABLE_VERIFICATION_REQUIREMENT:
			return M24SR_ReceiveDisableVerificationRequirement();
		case ENABLE_PERMANET_STATE:
			return M24SR_ReceiveEnablePermanentState();
		case DISABLE_PERMANET_STATE:
			return M24SR_ReceiveDisablePermanentState();
		default:
			return M24SR_SUCCESS;
	}//switch
}//manageInterrupt

NDefLib::NDefNfcTag&M24SR::get_NDef_tag(){
	return *mNDefTagUtil;
}


/******************* (C) COPYRIGHT 2013 STMicroelectronics *****END OF FILE****/