Simple test application for the STMicroelectronics X-NUCLEO-IDW01M1 Wi-Fi expansion board.
Dependencies: NetworkSocketAPI X_NUCLEO_IDW01M1v2 mbed
Fork of HelloWorld_IDW01M1v2 by
HelloWorld_IDW01M1 is an example application which uses the X_NUCLEO_IDW01M1v2 mbed library.
The software can be used for testing the X-NUCLEO-IDW01M1 expansion board on mbed platforms. Current supported platforms are NUCLEO-F401RE and NUCLEO-L476RG.
The SpwfSAInterface class needs to be instantiated with the UART RX and TX pins used. Depending on the platform used, the pin numbers may vary.
E.g. For FRDM K64F board it is: D9 and D7.
For Nucleo it is D8 and D2.
SpwfSAInterface spwf(D8, D2, false);
First of all, the example application tries to connect to the SSID/AP which is provided in the program code. In order to connect to your desired SSID/AP please change the SSID/AP settings/text to the one which is used in the user's environment. Please also remember that the SSID needs to be connected to the internet.
char * ssid = "STM"; //Please change to local SSID/AP name char * seckey = "STMdemoPWD"; //Please change password
After connection the program prints its own IP address and MAC address on the serial terminal over UART. Please launch a terminal application (e.g.: TeraTerm, PuTTY on Windows, Minicom on Linux) and set the UART port to 9600 bps, 8 bit, No Parity, 1 stop bit. Thereafter the program retreives the IP address of the "st.com" webpage and outputs it to the serial terminal.
After outputting the IP address of st.com, the program tries to connect to the address "http://4.ifcfg.me" and socket 23. After connecting to the socket the program receives the IP Address from the server and outputs the IP Address it receives which denotes the public IP Address of the platform + X-Nucleo-IDW01M1 (node).
Further the program closes the socket, disconnects from the SSID and exits. This is just a simple "Hello World" style program for the X-NUCLEO-IDW01M1 Wi-Fi Expansion Board.
File content as of revision 12:80d8e97e81f2: