HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.
Dependencies: mbed
Fork of HelloWorld_IDS01A5_Program by
mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.
EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1
X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_DirectRF.h
- Committer:
- rosarium
- Date:
- 2017-05-25
- Revision:
- 0:2ddc0583bcec
File content as of revision 0:2ddc0583bcec:
/**
******************************************************************************
* @file SPIRIT_DirectRF.h
* @author VMA division - AMS
* @version 3.2.2
* @date 08-July-2015
* @brief Configuration and management of SPIRIT direct transmission / receive modes.
* @details
*
* This module contains functions to manage the direct Tx/Rx mode.
* The user can choose the way to send data to Spirit through the
* enumerative types <i>@ref DirectTx</i>/<i>@ref DirectRx</i>.
*
* @attention
*
* <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __SPIRIT1_DIRECT_RF_H
#define __SPIRIT1_DIRECT_RF_H
/* Includes ------------------------------------------------------------------*/
#include "SPIRIT_Regs.h"
#include "SPIRIT_Types.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @addtogroup SPIRIT_Libraries
* @{
*/
/**
* @defgroup SPIRIT_DirectRf Direct RF
* @brief Configuration and management of SPIRIT direct transmission / receive modes.
* @details See the file <i>@ref SPIRIT_DirectRF.h</i> for more details.
* @{
*/
/**
* @defgroup DirectRf_Exported_Types Direct RF Exported Types
* @{
*/
/**
* @brief Direct transmission mode enumeration for SPIRIT.
*/
typedef enum
{
NORMAL_TX_MODE = 0x00, /*!< Normal mode, no direct transmission is used */
DIRECT_TX_FIFO_MODE = 0x04, /*!< Source is FIFO: payload bits are continuously read from the TX FIFO */
DIRECT_TX_GPIO_MODE = 0x08, /*!< Source is GPIO: payload bits are continuously read from one of the GPIO ports and transmitted without any processing */
PN9_TX_MODE = 0x0C /*!< A pseudorandom binary sequence is generated internally */
}DirectTx;
#define IS_DIRECT_TX(MODE) (((MODE) == NORMAL_TX_MODE) || \
((MODE) == DIRECT_TX_FIFO_MODE) || \
((MODE) == DIRECT_TX_GPIO_MODE) || \
((MODE) == PN9_TX_MODE))
/**
* @brief Direct receive mode enumeration for SPIRIT.
*/
typedef enum
{
NORMAL_RX_MODE = 0x00, /*!< Normal mode, no direct reception is used */
DIRECT_RX_FIFO_MODE = 0x10, /*!< Destination is FIFO: payload bits are continuously written to the RX FIFO and not subjected to any processing*/
DIRECT_RX_GPIO_MODE = 0x20 /*!< Destination is GPIO: payload bits are continuously written to one of the GPIO ports and not subjected to any processing*/
}DirectRx;
#define IS_DIRECT_RX(MODE) (((MODE) == NORMAL_RX_MODE) || \
((MODE) == DIRECT_RX_FIFO_MODE) || \
((MODE) == DIRECT_RX_GPIO_MODE))
/**
*@}
*/
/**
* @defgroup DirectRf_Exported_Constants Direct RF Exported Constants
* @{
*/
/**
*@}
*/
/**
* @defgroup DirectRf_Exported_Macros Direct RF Exported Macros
* @{
*/
/**
*@}
*/
/**
* @defgroup DirectRf_Exported_Functions Direct RF Exported Functions
* @{
*/
void SpiritDirectRfSetRxMode(DirectRx xDirectRx);
DirectRx SpiritDirectRfGetRxMode(void);
void SpiritDirectRfSetTxMode(DirectTx xDirectTx);
DirectTx SpiritDirectRfGetTxMode(void);
/**
*@}
*/
/**
*@}
*/
/**
*@}
*/
#ifdef __cplusplus
}
#endif
#endif
/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/

X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board