HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.
Dependencies: mbed
Fork of HelloWorld_IDS01A5_Program by
mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.
EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1
X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/Contiki_STM32_Library/spirit1.h
- Committer:
- rosarium
- Date:
- 2017-05-25
- Revision:
- 0:2ddc0583bcec
File content as of revision 0:2ddc0583bcec:
/*
* Copyright (c) 2012, STMicroelectronics.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*
*/
/*---------------------------------------------------------------------------*/
#ifndef __SPIRIT_H__
#define __SPIRIT_H__
/*---------------------------------------------------------------------------*/
#include "radio.h"
#include "SPIRIT_Config.h"
#include "spirit1-config.h"
//#include "spirit1_appli.h"
#include "spirit1-const.h"
/*---------------------------------------------------------------------------*/
extern const struct radio_driver spirit_radio_driver;
void spirit1_interrupt_callback(void);
/* exported from spirit1appli.h */
#include "radio_shield_config.h"
#include "MCU_Interface.h"
#include "SPIRIT_Config.h"
// betzw - WAS: #include "SPIRIT1_Util.h"
#if defined(X_NUCLEO_IDS01A3)
#define USE_SPIRIT1_433MHz
#elif defined(X_NUCLEO_IDS01A4)
#define USE_SPIRIT1_868MHz
#elif defined(X_NUCLEO_IDS01A5)
#define USE_SPIRIT1_915MHz
#else
#error SPIRIT1 Nucleo Shield undefined or unsupported
#endif
/* Uncomment the Link Layer features to be used */
// #define USE_AUTO_ACK
// #define USE_AUTO_ACK_PIGGYBACKING
// #define USE_AUTO_RETRANSMISSION
#if defined(USE_AUTO_ACK)&& defined(USE_AUTO_ACK_PIGGYBACKING)&& defined(USE_AUTO_RETRANSMISSION)
#define USE_STack_PROTOCOL
/* LLP configuration parameters */
#define EN_AUTOACK S_ENABLE
#define EN_PIGGYBACKING S_ENABLE
#define MAX_RETRANSMISSIONS PKT_N_RETX_2
#else
#define USE_BASIC_PROTOCOL
#endif
/* Uncomment the system Operating mode */
//#define USE_LOW_POWER_MODE
#if defined (USE_LOW_POWER_MODE)
#define LPM_ENABLE
#define MCU_STOP_MODE
//#define MCU_SLEEP_MODE
//#define RF_STANDBY
#endif
/* Exported constants --------------------------------------------------------*/
/* Radio configuration parameters */
#define XTAL_OFFSET_PPM 0
#define INFINITE_TIMEOUT 0.0
#ifdef USE_SPIRIT1_433MHz
#define BASE_FREQUENCY 433.0e6
#endif
#ifdef USE_SPIRIT1_868MHz
#define BASE_FREQUENCY 868.0e6
#endif
#ifdef USE_SPIRIT1_915MHz
//#define BASE_FREQUENCY 915.0e6
#define BASE_FREQUENCY 902.0e6
#endif
/* Addresses configuration parameters */
#define EN_FILT_MY_ADDRESS S_DISABLE
#define MY_ADDRESS 0x24
#define EN_FILT_MULTICAST_ADDRESS S_DISABLE
#define MULTICAST_ADDRESS 0xEE
#define EN_FILT_BROADCAST_ADDRESS S_DISABLE
#define BROADCAST_ADDRESS 0xFF
#define DESTINATION_ADDRESS 0x44
#define EN_FILT_SOURCE_ADDRESS S_DISABLE
#define SOURCE_ADDR_MASK 0xf0
#define SOURCE_ADDR_REF 0x37
#define APPLI_CMD 0x11
#define NWK_CMD 0x22
#define LED_TOGGLE 0xff
#define ACK_OK 0x01
#define MAX_BUFFER_LEN 96
#define TIME_TO_EXIT_RX 3000
#define DELAY_RX_LED_TOGGLE 200
#define DELAY_TX_LED_GLOW 1000
#define LPM_WAKEUP_TIME 100
#define DATA_SEND_TIME 30
#define PREAMBLE_LENGTH PKT_PREAMBLE_LENGTH_04BYTES
#define SYNC_LENGTH PKT_SYNC_LENGTH_4BYTES
#define CONTROL_LENGTH PKT_CONTROL_LENGTH_0BYTES
#define EN_ADDRESS S_DISABLE
#define EN_FEC S_DISABLE
#define CHANNEL_NUMBER 1 // betzw - WAS: 0
#define LENGTH_TYPE PKT_LENGTH_VAR
#define POWER_INDEX 7
#define RECEIVE_TIMEOUT 2000.0 /*change the value for required timeout period*/
#define RSSI_THRESHOLD -120
#define POWER_DBM 11.6
#define CHANNEL_SPACE 100e3
#define FREQ_DEVIATION 127e3
#define BANDWIDTH 540.0e3
#define MODULATION_SELECT GFSK_BT1
#define DATARATE 250000
#define XTAL_OFFSET_PPM 0
#define SYNC_WORD 0x88888888
#define LENGTH_WIDTH 8 // betzw - NOTE: only 255 bytes for payload!!!
#define CRC_MODE PKT_CRC_MODE_16BITS_2
#define EN_WHITENING S_DISABLE
#define INFINITE_TIMEOUT 0.0
// extern volatile FlagStatus xRxDoneFlag, xTxDoneFlag;
// extern volatile FlagStatus PushButtonStatusWakeup;
extern uint16_t wakeupCounter;
extern uint16_t dataSendCounter ;
// extern volatile FlagStatus PushButtonStatusData, datasendFlag;
typedef struct
{
uint8_t Cmdtag;
uint8_t CmdType;
uint8_t CmdLen;
uint8_t Cmd;
uint8_t DataLen;
uint8_t* DataBuff;
}AppliFrame_t;
/*---------------------------------------------------------------------------*/
#endif /* __SPIRIT_H__ */
/*---------------------------------------------------------------------------*/

X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board