Diff: X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/src/radio_spi.cpp

Revision:

5:a65ed26b0f98

Parent:

4:cae1fa054b86

Child:

6:f959c3ca734f

--- a/X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/src/radio_spi.cpp	Mon Jun 19 10:25:09 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,335 +0,0 @@
-/**
-******************************************************************************
-* @file    radio_spi.c
-* @author  System Lab - NOIDA
-* @version V1.0.0
-* @date    15-May-2014
-* @brief   This file provides code for the configuration of the SPI instances.
-******************************************************************************
-* @attention
-*
-* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*   1. Redistributions of source code must retain the above copyright notice,
-*      this list of conditions and the following disclaimer.
-*   2. Redistributions in binary form must reproduce the above copyright notice,
-*      this list of conditions and the following disclaimer in the documentation
-*      and/or other materials provided with the distribution.
-*   3. Neither the name of STMicroelectronics nor the names of its contributors
-*      may be used to endorse or promote products derived from this software
-*     without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************
-*/
-
-
-/* Includes ------------------------------------------------------------------*/
-#include "radio_spi.h"
-
-#include "SimpleSpirit1.h"
-
-
-/**
- * @addtogroup BSP
- * @{
- */
-
-
-/**
- * @addtogroup X-NUCLEO-IDS02Ax
- * @{
- */
-
-
-/**
- * @defgroup RADIO_SPI_Private_TypesDefinitions       RADIO_SPI Private Types Definitions
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup RADIO_SPI_Private_Defines                RADIO_SPI Private Defines
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup RADIO_SPI_Private_Macros                 RADIO_SPI Private Macros
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup RADIO_SPI_Private_Variables              RADIO_SPI Private Variables
- * @{
- */
-
-/**
- * @}
- */
-
-
-/**
- * @defgroup RADIO_SPI_Private_FunctionPrototypes     RADIO_SPI Private Function Prototypes
- * @{
- */
-
-/**
- * @}
- */
-
-/**
- * @defgroup RADIO_SPI_Private_Functions              RADIO_SPI Private Functions
- * @{
- */
-
-/**
-* @}
-*/
-
-/**
-* @brief  Write single or multiple RF Transceivers register
-* @param  cRegAddress: base register's address to be write
-* @param  cNbBytes: number of registers and bytes to be write
-* @param  pcBuffer: pointer to the buffer of values have to be written into registers
-* @retval StatusBytes
-*/
-StatusBytes SdkEvalSpiWriteRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-	return SimpleSpirit1::Instance().SdkEvalSpiWriteRegisters(cRegAddress, cNbBytes, pcBuffer);
-}
-
-StatusBytes SimpleSpirit1::SdkEvalSpiWriteRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-  uint8_t aHeader[2] = {0};
-  uint16_t tmpstatus = 0x0000;
-  StatusBytes *pStatus=(StatusBytes *)&tmpstatus;
-
-  /* Built the aHeader bytes */
-  aHeader[0] = WRITE_HEADER;
-  aHeader[1] = cRegAddress;
-
-  /* Puts the SPI chip select low to start the transaction */
-  chip_sync_select();
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus = _spi.write(aHeader[0]);
-  tmpstatus = tmpstatus << 8;
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus |= _spi.write(aHeader[1]);
-
-  /* Writes the registers according to the number of bytes */
-  for (int index = 0; index < cNbBytes; index++)
-  {
-	  _spi.write(pcBuffer[index]);
-  }
-
-  /* Puts the SPI chip select high to end the transaction */
-  chip_sync_unselect();
-
-  return *pStatus;
-}
-
-
-/**
-* @brief  Read single or multiple SPIRIT1 register
-* @param  cRegAddress: base register's address to be read
-* @param  cNbBytes: number of registers and bytes to be read
-* @param  pcBuffer: pointer to the buffer of registers' values read
-* @retval StatusBytes
-*/
-StatusBytes SdkEvalSpiReadRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-	return SimpleSpirit1::Instance().SdkEvalSpiReadRegisters(cRegAddress, cNbBytes, pcBuffer);
-}
-
-StatusBytes SimpleSpirit1::SdkEvalSpiReadRegisters(uint8_t cRegAddress, uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-  uint16_t tmpstatus = 0x00;
-  StatusBytes *pStatus = (StatusBytes *)&tmpstatus;
-
-  uint8_t aHeader[2] = {0};
-
-  /* Built the aHeader bytes */
-  aHeader[0] = READ_HEADER;
-  aHeader[1] = cRegAddress;
-
-  /* Put the SPI chip select low to start the transaction */
-  chip_sync_select();
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus = _spi.write(aHeader[0]);
-  tmpstatus = tmpstatus << 8;
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus |= _spi.write(aHeader[1]);
-
-  for (int index = 0; index < cNbBytes; index++)
-  {
-	  pcBuffer[index] = _spi.write(0xFF);
-  }
-
-  /* Put the SPI chip select high to end the transaction */
-  chip_sync_unselect();
-
-  return *pStatus;
-}
-
-
-/**
-* @brief  Send a command
-* @param  cCommandCode: command code to be sent
-* @retval StatusBytes
-*/
-StatusBytes SdkEvalSpiCommandStrobes(uint8_t cCommandCode)
-{
-	return SimpleSpirit1::Instance().SdkEvalSpiCommandStrobes(cCommandCode);
-}
-
-StatusBytes SimpleSpirit1::SdkEvalSpiCommandStrobes(uint8_t cCommandCode)
-{
-  uint8_t aHeader[2] = {0};
-  uint16_t tmpstatus = 0x0000;
-
-  StatusBytes *pStatus = (StatusBytes *)&tmpstatus;
-
-  /* Built the aHeader bytes */
-  aHeader[0] = COMMAND_HEADER;
-  aHeader[1] = cCommandCode;
-
-  /* Puts the SPI chip select low to start the transaction */
-  chip_sync_select();
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus = _spi.write(aHeader[0]);
-  tmpstatus = tmpstatus<<8;
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus |= _spi.write(aHeader[1]);
-
-  /* Puts the SPI chip select high to end the transaction */
-  chip_sync_unselect();
-
-  return *pStatus;
-}
-
-
-/**
-* @brief  Write data into TX FIFO
-* @param  cNbBytes: number of bytes to be written into TX FIFO
-* @param  pcBuffer: pointer to data to write
-* @retval StatusBytes
-*/
-StatusBytes SdkEvalSpiWriteFifo(uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-	return SimpleSpirit1::Instance().SdkEvalSpiWriteFifo(cNbBytes, pcBuffer);
-}
-
-StatusBytes SimpleSpirit1::SdkEvalSpiWriteFifo(uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-  uint16_t tmpstatus = 0x0000;
-  StatusBytes *pStatus = (StatusBytes *)&tmpstatus;
-
-  uint8_t aHeader[2] = {0};
-
-  /* Built the aHeader bytes */
-  aHeader[0] = WRITE_HEADER;
-  aHeader[1] = LINEAR_FIFO_ADDRESS;
-
-  /* Put the SPI chip select low to start the transaction */
-  chip_sync_select();
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus = _spi.write(aHeader[0]);
-  tmpstatus = tmpstatus<<8;
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus |= _spi.write(aHeader[1]);
-
-  /* Writes the registers according to the number of bytes */
-  for (int index = 0; index < cNbBytes; index++)
-  {
-	  _spi.write(pcBuffer[index]);
-  }
-
-  /* Put the SPI chip select high to end the transaction */
-  chip_sync_unselect();
-
-  return *pStatus;
-}
-
-/**
-* @brief  Read data from RX FIFO
-* @param  cNbBytes: number of bytes to read from RX FIFO
-* @param  pcBuffer: pointer to data read from RX FIFO
-* @retval StatusBytes
-*/
-StatusBytes SdkEvalSpiReadFifo(uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-	return SimpleSpirit1::Instance().SdkEvalSpiReadFifo(cNbBytes, pcBuffer);
-}
-
-StatusBytes SimpleSpirit1::SdkEvalSpiReadFifo(uint8_t cNbBytes, uint8_t* pcBuffer)
-{
-  uint16_t tmpstatus = 0x0000;
-  StatusBytes *pStatus = (StatusBytes *)&tmpstatus;
-
-  uint8_t aHeader[2];
-
-  /* Built the aHeader bytes */
-  aHeader[0]=READ_HEADER;
-  aHeader[1]=LINEAR_FIFO_ADDRESS;
-
-  /* Put the SPI chip select low to start the transaction */
-  chip_sync_select();
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus = _spi.write(aHeader[0]);
-  tmpstatus = tmpstatus<<8;
-
-  /* Write the aHeader bytes and read the SPIRIT1 status bytes */
-  tmpstatus |= _spi.write(aHeader[1]);
-
-  for (int index = 0; index < cNbBytes; index++)
-  {
-	  pcBuffer[index] = _spi.write(0xFF);
-  }
-
-  /* Put the SPI chip select high to end the transaction */
-  chip_sync_unselect();
-
-  return *pStatus;
-}
-
-
-/**
-* @}
-*/
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/