HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.

Dependencies:   mbed

Fork of HelloWorld_IDS01A5_Program by rosarium pila

mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.

EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1

Revision:
5:a65ed26b0f98
Parent:
4:cae1fa054b86
Child:
6:f959c3ca734f
--- a/X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Config.h	Mon Jun 19 10:25:09 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,147 +0,0 @@
-/**
-  ******************************************************************************
- * @file    SPIRIT_Config.h
-  * @author  VMA division - AMS
-  * @version 3.2.2
-  * @date    08-July-2015
-  * @brief   Spirit Configuration and useful defines 
-  * 
- * @details
- *
- * This file is used to include all or a part of the Spirit
- * libraries into the application program which will be used.
- * Moreover some important parameters are defined here and the
- * user is allowed to edit them.
- *
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
-  ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __SPIRIT_CONFIG_H
-#define __SPIRIT_CONFIG_H
-
-
-  /* Includes ------------------------------------------------------------------*/
-#include "SPIRIT_Regs.h"
-#include "SPIRIT_Aes.h"
-#include "SPIRIT_Calibration.h"
-#include "SPIRIT_Commands.h"
-#include "SPIRIT_Csma.h"
-#include "SPIRIT_DirectRF.h"
-#include "SPIRIT_General.h"
-#include "SPIRIT_Gpio.h"
-#include "SPIRIT_Irq.h"
-#include "SPIRIT_Timer.h"
-#include "SPIRIT_LinearFifo.h"
-#include "SPIRIT_PktBasic.h"
-#include "SPIRIT_PktMbus.h"
-#include "SPIRIT_PktStack.h"
-
-#include "SPIRIT_Qi.h"
-#include "SPIRIT_Radio.h"
-#include "MCU_Interface.h"
-#include "SPIRIT_Types.h"
-#include "SPIRIT_Management.h"
-
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/** @addtogroup SPIRIT_Libraries        SPIRIT Libraries
- * @brief This firmware implements libraries which allow the user
- * to manage the features of Spirit without knowing the hardware details.
- * @details The <i>SPIRIT_Libraries</i> modules are totally platform independent. The library provides one
- * module for each device feature. Each module refers to some functions whose prototypes are located in the
- * header file <i>@ref MCU_Interface.h</i>. The user who want to use these libraries on a particular
- * platform has to implement these functions respecting them signatures.
- * @{
- */
-
-/** @defgroup SPIRIT_Configuration      Configuration
- * @brief Spirit Configuration and useful defines.
- * @details See the file <i>@ref SPIRIT_Config.h</i> for more details.
- * @{
- */
-
-
-/** @defgroup Configuration_Exported_Types      Configuration Exported Types
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup Configuration_Exported_Constants  Configuration Exported Constants
- * @{
- */
-#define DOUBLE_XTAL_THR                         30000000
-
-/**
- * @}
- */
-
-
-/** @defgroup Configuration_Exported_Macros     Configuration Exported Macros
- * @{
- */
-
-/**
- * @}
- */
-
-
-/** @defgroup Configuration_Exported_Functions  Configuration Exported Functions
- * @{
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/