ST / Mbed 2 deprecated HelloWorld_IDS01A4

HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.

Dependencies:   mbed

Fork of HelloWorld_IDS01A5_Program by rosarium pila

mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.

EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1

Diff: X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/Contiki_STM32_Library/spirit1-const.h

Revision:
5:a65ed26b0f98
Parent:
4:cae1fa054b86
Child:
6:f959c3ca734f
--- a/X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/Contiki_STM32_Library/spirit1-const.h	Mon Jun 19 10:25:09 2017 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 2012, STMicroelectronics.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the copyright holder nor the names of its
- *    contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
- * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-/*---------------------------------------------------------------------------*/
-#ifndef __SPIRIT1_CONST_H__
-#define __SPIRIT1_CONST_H__
-/*---------------------------------------------------------------------------*/
-
-/*---------------------------------------------------------------------------*/
-
-/* The state bitfield and values for different states, as read from MC_STATE[1:0] registers,
-which are returned on any SPI read or write operation. */
-#define SPIRIT1_STATE_STATEBITS           (0x00FE)
-/*---------------------------------------------------------------------------*/
-
-#define SPIRIT1_STATE_STANDBY             ((0x0040)<<1)
-#define SPIRIT1_STATE_SLEEP               ((0x0036)<<1)
-#define SPIRIT1_STATE_READY               ((0x0003)<<1)
-#define SPIRIT1_STATE_LOCK                ((0x000F)<<1)
-#define SPIRIT1_STATE_RX                  ((0x0033)<<1)
-#define SPIRIT1_STATE_TX                  ((0x005F)<<1)
-/* NB the below states were extracted from ST drivers, but are not specified in the datasheet */
-#define SPIRIT1_STATE_PM_SETUP            ((0x003D)<<1)
-#define SPIRIT1_STATE_XO_SETTLING         ((0x0023)<<1)
-#define SPIRIT1_STATE_SYNTH_SETUP         ((0x0053)<<1)
-#define SPIRIT1_STATE_PROTOCOL            ((0x001F)<<1)
-#define SPIRIT1_STATE_SYNTH_CALIBRATION   ((0x004F)<<1)
-/*---------------------------------------------------------------------------*/
-/* strobe commands */
-#define SPIRIT1_STROBE_TX             0x60
-#define SPIRIT1_STROBE_RX             0x61
-#define SPIRIT1_STROBE_READY          0x62
-#define SPIRIT1_STROBE_STANDBY        0x63
-#define SPIRIT1_STROBE_SLEEP          0x64
-#define SPIRIT1_STROBE_SABORT         0x67
-#define SPIRIT1_STROBE_SRES           0x70
-#define SPIRIT1_STROBE_FRX            0x71
-#define SPIRIT1_STROBE_FTX            0x72
-/*---------------------------------------------------------------------------*/
-
-
-
-/* Exported types ------------------------------------------------------------*/
-/*------------------------------------------------------------------*/
-
-
-#endif /* __SPIRIT1_CONST_H__ */
-/*---------------------------------------------------------------------------*/