Diff: X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Commands.h

Revision:

0:2ddc0583bcec

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/spirit1/SPIRIT1_Library/Inc/SPIRIT_Commands.h	Thu May 25 16:38:55 2017 +0000
@@ -0,0 +1,336 @@
+/**
+  ******************************************************************************
+ * @file    SPIRIT_Commands.h
+  * @author  VMA division - AMS
+  * @version 3.2.2
+  * @date    08-July-2015
+ * @brief   Management of SPIRIT Commands.
+  *
+ * @details
+ *
+ * In this module can be found all the API used to strobe commands to
+ * Spirit.
+ * Every command strobe is an SPI transaction with a specific command code.
+ *
+ * <b>Example:</b>
+ * @code
+ *   ...
+ *
+ *   SpiritCmdStrobeRx();
+ *
+ *   ...
+ * @endcode
+ *
+ *
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __SPIRIT_COMMANDS_H
+#define __SPIRIT_COMMANDS_H
+
+
+/* Includes ------------------------------------------------------------------*/
+
+#include "SPIRIT_Regs.h"
+#include "SPIRIT_Types.h"
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+
+/**
+ * @addtogroup SPIRIT_Libraries
+ * @{
+ */
+
+
+/**
+ * @defgroup SPIRIT_Commands    Commands
+ * @brief Management of SPIRIT Commands.
+ * @details See the file <i>@ref SPIRIT_Commands.h</i> for more details.
+ * @{
+ */
+
+/**
+ * @defgroup Commands_Exported_Types    Commands Exported Types
+ * @{
+ */
+
+/**
+  * @brief  SPIRIT Commands codes enumeration
+  */
+typedef enum
+{
+  CMD_TX =  COMMAND_TX,                           /*!< Start to transmit; valid only from READY */
+  CMD_RX =  COMMAND_RX,                           /*!< Start to receive; valid only from READY */
+  CMD_READY =  COMMAND_READY,                     /*!< Go to READY; valid only from STANDBY or SLEEP or LOCK */
+  CMD_STANDBY =  COMMAND_STANDBY,                 /*!< Go to STANDBY; valid only from READY */
+  CMD_SLEEP = COMMAND_SLEEP,                      /*!< Go to SLEEP; valid only from READY */
+  CMD_LOCKRX = COMMAND_LOCKRX,                    /*!< Go to LOCK state by using the RX configuration of the synth; valid only from READY */
+  CMD_LOCKTX = COMMAND_LOCKTX,                    /*!< Go to LOCK state by using the TX configuration of the synth; valid only from READY */
+  CMD_SABORT = COMMAND_SABORT,                    /*!< Force exit form TX or RX states and go to READY state; valid only from TX or RX */
+  CMD_LDC_RELOAD = COMMAND_LDC_RELOAD,            /*!< LDC Mode: Reload the LDC timer with the value stored in the  LDC_PRESCALER / COUNTER  registers; valid from all states  */
+  CMD_SEQUENCE_UPDATE =  COMMAND_SEQUENCE_UPDATE, /*!< Autoretransmission: Reload the Packet sequence counter with the value stored in the PROTOCOL[2] register valid from all states */
+  CMD_AES_ENC = COMMAND_AES_ENC,                  /*!< Commands: Start the encryption routine; valid from all states; valid from all states */
+  CMD_AES_KEY = COMMAND_AES_KEY,                  /*!< Commands: Start the procedure to compute the key for the decryption; valid from all states */
+  CMD_AES_DEC = COMMAND_AES_DEC,                  /*!< Commands: Start the decryption routine using the current key; valid from all states */
+  CMD_AES_KEY_DEC = COMMAND_AES_KEY_DEC,          /*!< Commands: Compute the key and start the decryption; valid from all states */
+  CMD_SRES = COMMAND_SRES,                        /*!< Reset of all digital part, except SPI registers */
+  CMD_FLUSHRXFIFO = COMMAND_FLUSHRXFIFO,          /*!< Clean the RX FIFO; valid from all states */
+  CMD_FLUSHTXFIFO = COMMAND_FLUSHTXFIFO,          /*!< Clean the TX FIFO; valid from all states */
+} SpiritCmd;
+
+#define IS_SPIRIT_CMD(CMD)  (CMD == CMD_TX || \
+                             CMD == CMD_RX || \
+                             CMD == CMD_READY || \
+                             CMD == CMD_STANDBY || \
+                             CMD == CMD_SLEEP || \
+                             CMD == CMD_LOCKRX || \
+                             CMD == CMD_LOCKTX || \
+                             CMD == CMD_SABORT || \
+                             CMD == CMD_LDC_RELOAD || \
+                             CMD == CMD_SEQUENCE_UPDATE || \
+                             CMD == CMD_AES_ENC || \
+                             CMD == CMD_AES_KEY || \
+                             CMD == CMD_AES_DEC || \
+                             CMD == CMD_AES_KEY_DEC || \
+                             CMD == CMD_SRES || \
+                             CMD == CMD_FLUSHRXFIFO || \
+                             CMD == CMD_FLUSHTXFIFO \
+                            )
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Commands_Exported_Constants        Commands Exported Constants
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Commands_Exported_Macros   Commands Exported Macros
+ * @{
+ */
+
+/**
+ * @brief  Sends the TX command to SPIRIT. Start to transmit.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeTx()      {SpiritManagementWaCmdStrobeTx(); \
+                                  SpiritCmdStrobeCommand(CMD_TX);} 
+
+
+/**
+ * @brief  Sends the RX command to SPIRIT. Start to receive.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeRx()      {SpiritManagementWaCmdStrobeRx(); \
+                                  SpiritCmdStrobeCommand(CMD_RX); \
+                                  } 
+
+
+/**
+ * @brief  Sends the Ready state command to SPIRIT. Go to READY.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeReady()          SpiritCmdStrobeCommand(CMD_READY)
+
+
+
+/**
+ * @brief  Sends the Standby command to SPIRIT. Go to STANDBY.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeStandby()        SpiritCmdStrobeCommand(CMD_STANDBY)
+
+
+
+/**
+ * @brief  Sends the Sleep command to SPIRIT. Go to SLEEP.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSleep()          SpiritCmdStrobeCommand(CMD_SLEEP)
+
+
+
+/**
+ * @brief  Sends the LOCK_RX command to SPIRIT. Go to the LOCK state by using the RX configuration of the synthesizer.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeLockRx()         SpiritCmdStrobeCommand(CMD_LOCKRX)
+
+
+
+/**
+ * @brief  Sends the LOCK_TX command to SPIRIT. Go to the LOCK state by using the TX configuration of the synthesizer.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeLockTx()         SpiritCmdStrobeCommand(CMD_LOCKTX)
+
+
+
+/**
+ * @brief  Sends the SABORT command to SPIRIT. Exit from TX or RX states and go to READY state.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSabort()         SpiritCmdStrobeCommand(CMD_SABORT)
+
+
+/**
+ * @brief  Sends the LDC_RELOAD command to SPIRIT. Reload the LDC timer with the value stored in the LDC_PRESCALER / COUNTER registers.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeLdcReload()      SpiritCmdStrobeCommand(CMD_LDC_RELOAD)
+
+
+
+/**
+ * @brief  Sends the SEQUENCE_UPDATE command to SPIRIT. Reload the Packet sequence counter with the value stored in the PROTOCOL[2] register.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSequenceUpdate() SpiritCmdStrobeCommand(CMD_SEQUENCE_UPDATE)
+
+
+
+/**
+ * @brief  Sends the AES_ENC command to SPIRIT. Starts the encryption routine.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesEnc()         SpiritCmdStrobeCommand(CMD_AES_ENC)
+
+
+
+/**
+ * @brief  Sends the AES_KEY command to SPIRIT. Starts the procedure to compute the key for the decryption.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesKey()         SpiritCmdStrobeCommand(CMD_AES_KEY)
+
+
+
+/**
+ * @brief  Sends the AES_DEC command to SPIRIT. Starts the decryption using the current key.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesDec()         SpiritCmdStrobeCommand(CMD_AES_DEC)
+
+
+
+/**
+ * @brief  Sends the KEY_DEC command to SPIRIT. Computes the key derivation and start the decryption.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeAesKeyDec()     SpiritCmdStrobeCommand(CMD_AES_KEY_DEC)
+
+/**
+ * @brief  Sends the SRES command to SPIRIT. Partial reset: all digital circuit will be reset (exception for SPI only).
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeSres()          SpiritCmdStrobeCommand(CMD_SRES)  
+  
+
+/**
+ * @brief  Sends the FLUSHRXFIFO command to SPIRIT. Clean the RX FIFO.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeFlushRxFifo()    SpiritCmdStrobeCommand(CMD_FLUSHRXFIFO)
+
+
+
+/**
+ * @brief  Sends the FLUSHTXFIFO command to SPIRIT. Clean the TX FIFO.
+ * @param  None.
+ * @retval None.
+ */
+#define SpiritCmdStrobeFlushTxFifo()    SpiritCmdStrobeCommand(CMD_FLUSHTXFIFO)
+
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @defgroup Commands_Exported_Functions    Commands Exported Functions
+ * @{
+ */
+void SpiritCmdStrobeCommand(SpiritCmd xCommandCode);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+/******************* (C) COPYRIGHT 2015 STMicroelectronics *****END OF FILE****/