HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.

Dependencies:   mbed

Fork of HelloWorld_IDS01A5_Program by rosarium pila

mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.

EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1

Revision:
0:2ddc0583bcec
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/Contiki_STM32_Library/spirit1.h	Thu May 25 16:38:55 2017 +0000
@@ -0,0 +1,179 @@
+/*
+ * Copyright (c) 2012, STMicroelectronics.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Institute nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * This file is part of the Contiki operating system.
+ *
+ */
+/*---------------------------------------------------------------------------*/
+#ifndef __SPIRIT_H__
+#define __SPIRIT_H__
+/*---------------------------------------------------------------------------*/
+#include "radio.h"
+#include "SPIRIT_Config.h"
+#include "spirit1-config.h"
+//#include "spirit1_appli.h"
+#include "spirit1-const.h"
+/*---------------------------------------------------------------------------*/   
+extern const struct radio_driver spirit_radio_driver;
+void spirit1_interrupt_callback(void);
+
+/* exported from spirit1appli.h */
+
+#include "radio_shield_config.h"
+#include "MCU_Interface.h"
+#include "SPIRIT_Config.h"
+// betzw - WAS: #include "SPIRIT1_Util.h"
+
+
+#if defined(X_NUCLEO_IDS01A3)
+	 #define USE_SPIRIT1_433MHz
+#elif defined(X_NUCLEO_IDS01A4)
+         #define USE_SPIRIT1_868MHz
+#elif defined(X_NUCLEO_IDS01A5)
+         #define USE_SPIRIT1_915MHz
+#else
+#error SPIRIT1 Nucleo Shield undefined or unsupported
+#endif
+
+/*  Uncomment the Link Layer features to be used */
+// #define USE_AUTO_ACK
+// #define USE_AUTO_ACK_PIGGYBACKING
+// #define USE_AUTO_RETRANSMISSION
+
+#if defined(USE_AUTO_ACK)&& defined(USE_AUTO_ACK_PIGGYBACKING)&& defined(USE_AUTO_RETRANSMISSION)
+#define USE_STack_PROTOCOL
+
+/* LLP configuration parameters */
+#define EN_AUTOACK                      S_ENABLE
+#define EN_PIGGYBACKING             	S_ENABLE
+#define MAX_RETRANSMISSIONS         	PKT_N_RETX_2
+
+#else
+#define USE_BASIC_PROTOCOL
+
+#endif
+
+/*  Uncomment the system Operating mode */
+//#define USE_LOW_POWER_MODE
+
+#if defined (USE_LOW_POWER_MODE)
+#define LPM_ENABLE
+#define MCU_STOP_MODE
+//#define MCU_SLEEP_MODE
+//#define RF_STANDBY
+#endif
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/*  Radio configuration parameters  */
+#define XTAL_OFFSET_PPM             0
+#define INFINITE_TIMEOUT            0.0
+
+#ifdef USE_SPIRIT1_433MHz
+#define BASE_FREQUENCY              433.0e6
+#endif
+
+#ifdef USE_SPIRIT1_868MHz
+#define BASE_FREQUENCY              868.0e6
+#endif
+
+#ifdef USE_SPIRIT1_915MHz
+//#define BASE_FREQUENCY              915.0e6
+#define BASE_FREQUENCY              902.0e6
+#endif
+
+
+/*  Addresses configuration parameters  */
+#define EN_FILT_MY_ADDRESS          S_DISABLE
+#define MY_ADDRESS                  0x24
+#define EN_FILT_MULTICAST_ADDRESS   S_DISABLE
+#define MULTICAST_ADDRESS           0xEE
+#define EN_FILT_BROADCAST_ADDRESS   S_DISABLE
+#define BROADCAST_ADDRESS           0xFF
+#define DESTINATION_ADDRESS         0x44
+#define EN_FILT_SOURCE_ADDRESS      S_DISABLE
+#define SOURCE_ADDR_MASK            0xf0
+#define SOURCE_ADDR_REF             0x37
+
+#define APPLI_CMD                       0x11
+#define NWK_CMD                         0x22
+#define LED_TOGGLE                      0xff
+#define ACK_OK                          0x01
+#define MAX_BUFFER_LEN                  96
+#define TIME_TO_EXIT_RX                 3000
+#define DELAY_RX_LED_TOGGLE             200
+#define DELAY_TX_LED_GLOW               1000
+#define LPM_WAKEUP_TIME                 100
+#define DATA_SEND_TIME                  30
+
+#define PREAMBLE_LENGTH             PKT_PREAMBLE_LENGTH_04BYTES
+#define SYNC_LENGTH                 PKT_SYNC_LENGTH_4BYTES
+#define CONTROL_LENGTH              PKT_CONTROL_LENGTH_0BYTES
+#define EN_ADDRESS                  S_DISABLE
+#define EN_FEC                      S_DISABLE
+#define CHANNEL_NUMBER              1 // betzw - WAS: 0
+#define LENGTH_TYPE                 PKT_LENGTH_VAR
+#define POWER_INDEX                 7
+#define RECEIVE_TIMEOUT             2000.0 /*change the value for required timeout period*/
+#define RSSI_THRESHOLD              -120
+
+
+
+#define POWER_DBM                   11.6
+#define CHANNEL_SPACE               100e3
+#define FREQ_DEVIATION              127e3
+#define BANDWIDTH                   540.0e3
+#define MODULATION_SELECT           GFSK_BT1
+#define DATARATE                    250000
+#define XTAL_OFFSET_PPM             0
+#define SYNC_WORD                   0x88888888
+#define LENGTH_WIDTH                8 // betzw - NOTE: only 255 bytes for payload!!!
+#define CRC_MODE                    PKT_CRC_MODE_16BITS_2
+#define EN_WHITENING                S_DISABLE
+#define INFINITE_TIMEOUT            0.0
+
+// extern volatile FlagStatus xRxDoneFlag, xTxDoneFlag;
+// extern volatile FlagStatus PushButtonStatusWakeup;
+extern uint16_t wakeupCounter;
+extern uint16_t dataSendCounter ;
+// extern volatile FlagStatus PushButtonStatusData, datasendFlag;
+
+typedef struct
+{
+  uint8_t Cmdtag;
+  uint8_t CmdType;
+  uint8_t CmdLen;
+  uint8_t Cmd;
+  uint8_t DataLen;
+  uint8_t* DataBuff;
+}AppliFrame_t;
+
+/*---------------------------------------------------------------------------*/
+#endif /* __SPIRIT_H__ */
+/*---------------------------------------------------------------------------*/