HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.
Dependencies: mbed
Fork of HelloWorld_IDS01A5_Program by
mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.
EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1
Diff: X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/Contiki_STM32_Library/contiki-conf.h
- Revision:
- 0:2ddc0583bcec
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/libs/Contiki_STM32_Library/contiki-conf.h Thu May 25 16:38:55 2017 +0000 @@ -0,0 +1,155 @@ +/** +****************************************************************************** +* @file platform/stm32nucleo-spirit1/contiki-conf.h +* @author System LAB +* @version V1.0.0 +* @date 17-May-2015 +* @brief Contiki configuration parameters +****************************************************************************** +* @attention +* +* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> +* +* Redistribution and use in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ +/*---------------------------------------------------------------------------*/ +#ifndef __CONTIKI_CONF_H__ +#define __CONTIKI_CONF_H__ +/*---------------------------------------------------------------------------*/ +#include "platform-conf.h" +//#include "project-conf.h" +/*---------------------------------------------------------------------------*/ +#define SLIP_BRIDGE_CONF_NO_PUTCHAR 1 + +#define NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE 8 +#define NULLRDC_CONF_802154_AUTOACK 0 +#define NETSTACK_CONF_FRAMER framer_802154 +#define NETSTACK_CONF_NETWORK sicslowpan_driver + +#undef NETSTACK_CONF_RDC +#define NETSTACK_CONF_RDC nullrdc_driver +#define NETSTACK_RDC_HEADER_LEN 0 + +#undef NETSTACK_CONF_MAC +#define NETSTACK_CONF_MAC csma_driver +#define NETSTACK_MAC_HEADER_LEN 0 + +#define SICSLOWPAN_CONF_MAC_MAX_PAYLOAD \ + (NETSTACK_RADIO_MAX_PAYLOAD_LEN - NETSTACK_MAC_HEADER_LEN - \ + NETSTACK_RDC_HEADER_LEN ) + +#define RIMESTATS_CONF_ENABLED 0 +#define RIMESTATS_CONF_ON 0 + + +/* Network setup for IPv6 */ + +#define CXMAC_CONF_ANNOUNCEMENTS 0 + + +/* A trick to resolve a compilation error with IAR. */ +#ifdef __ICCARM__ +#define UIP_CONF_DS6_AADDR_NBU 1 +#endif + +/* radio driver blocks until ACK is received */ +#define NULLRDC_CONF_ACK_WAIT_TIME (0) +#define CONTIKIMAC_CONF_BROADCAST_RATE_LIMIT 0 +#define IEEE802154_CONF_PANID 0xABCD + +#define AODV_COMPLIANCE + +#define WITH_ASCII 1 + +#define PROCESS_CONF_NUMEVENTS 8 +#define PROCESS_CONF_STATS 1 +/*#define PROCESS_CONF_FASTPOLL 4*/ + + +#define LINKADDR_CONF_SIZE 8 + +#define UIP_CONF_LL_802154 1 +#define UIP_CONF_LLH_LEN 0 + +#define UIP_CONF_ROUTER 1 + +/* configure number of neighbors and routes */ +#ifndef UIP_CONF_DS6_ROUTE_NBU +#define UIP_CONF_DS6_ROUTE_NBU 30 +#endif /* UIP_CONF_DS6_ROUTE_NBU */ + +#ifndef UIP_CONF_ND6_SEND_RA +#define UIP_CONF_ND6_SEND_RA 0 +#endif +#define UIP_CONF_ND6_REACHABLE_TIME 600000 //90000// 600000 +#define UIP_CONF_ND6_RETRANS_TIMER 10000 + + +#define UIP_CONF_IPV6 1 +#ifndef UIP_CONF_IPV6_QUEUE_PKT +#define UIP_CONF_IPV6_QUEUE_PKT 0 +#endif /* UIP_CONF_IPV6_QUEUE_PKT */ +#define UIP_CONF_IP_FORWARD 0 +#ifndef UIP_CONF_BUFFER_SIZE +//#define UIP_CONF_BUFFER_SIZE 280 +#define UIP_CONF_BUFFER_SIZE 600 +#endif + +#define SICSLOWPAN_CONF_MAXAGE 4 +#define SICSLOWPAN_CONF_MAX_ADDR_CONTEXTS 2 + + +#ifndef SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS +#define SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS 5 +#endif /* SICSLOWPAN_CONF_MAX_MAC_TRANSMISSIONS */ + +#define UIP_CONF_ICMP_DEST_UNREACH 1 + +#define UIP_CONF_DHCP_LIGHT +#define UIP_CONF_LLH_LEN 0 +#ifndef UIP_CONF_RECEIVE_WINDOW +#define UIP_CONF_RECEIVE_WINDOW 150 +#endif +#ifndef UIP_CONF_TCP_MSS +#define UIP_CONF_TCP_MSS UIP_CONF_RECEIVE_WINDOW +#endif +#define UIP_CONF_MAX_CONNECTIONS 4 +#define UIP_CONF_MAX_LISTENPORTS 8 +#define UIP_CONF_UDP_CONNS 12 +#define UIP_CONF_FWCACHE_SIZE 30 +#define UIP_CONF_BROADCAST 1 +#define UIP_ARCH_IPCHKSUM 0 +#define UIP_CONF_UDP 1 +#define UIP_CONF_UDP_CHECKSUMS 1 +#define UIP_CONF_TCP 1 +/*---------------------------------------------------------------------------*/ +/* include the project config */ +/* PROJECT_CONF_H might be defined in the project Makefile */ +#ifdef PROJECT_CONF_H +#include "project-conf.h" +#endif /* PROJECT_CONF_H */ +/*---------------------------------------------------------------------------*/ +#endif /* CONTIKI_CONF_H */ +/*---------------------------------------------------------------------------*/

X-NUCLEO-IDS01A4 Sub-1GHz RF Expansion Board