ST / Mbed 2 deprecated HelloWorld_IDS01A4

HelloWorld_IDS01A4 mbed application for Spirit1 P2P demo.

Dependencies:   mbed

Fork of HelloWorld_IDS01A5_Program by rosarium pila

mbed 2.0 (a.k.a classic) HelloWorld example for Spirit1 to transfer data from one node to another.
To send the predefined data packet from the sender to the receiver, user needs to press User Button on the board. The LED on the receiver expansion board will toggle on reception of data successfully.
Data packets sent and received can be seen on USB serial terminal.

EVALUATION BOARDS RF FREQUENCY DESCRIPTION :
X-NUCLEO-IDS01A4 868 MHz 868 MHz RF expansion board based on SPIRIT1

X_NUCLEO_IDS01A5/Components/stm-spirit1-rf-driver/README.md@0:2ddc0583bcec, 2017-05-25 (annotated)

Committer:
rosarium
Date:
Thu May 25 16:38:55 2017 +0000
Revision:
0:2ddc0583bcec
First draft version of HelloWorld_IDS01A5

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rosarium 0:2ddc0583bcec 1 # Prototype RF Driver for STM Sub-1 GHz RF Expansion Boards based on the SPSGRF-868 Module for STM32 Nucleo #
rosarium 0:2ddc0583bcec 2
rosarium 0:2ddc0583bcec 3 Currently supported boards:
rosarium 0:2ddc0583bcec 4 * [X-NUCLEO-IDS01A4](http://www.st.com/content/st_com/en/products/ecosystems/stm32-open-development-environment/stm32-nucleo-expansion-boards/stm32-ode-connect-hw/x-nucleo-ids01a4.html)
rosarium 0:2ddc0583bcec 5
rosarium 0:2ddc0583bcec 6 **Note**, in order to use expansion board `X-NUCLEO-IDS01A4` in mbed you need to perform the following HW modifications on the board:
rosarium 0:2ddc0583bcec 7 * **Un**mount resistor `R4`
rosarium 0:2ddc0583bcec 8 * **Mount** resistor `R7`
rosarium 0:2ddc0583bcec 9
rosarium 0:2ddc0583bcec 10 Furthermore, on some Nucleo development boards (e.g. the [NUCLEO_F429ZI](https://developer.mbed.org/platforms/ST-Nucleo-F429ZI/)), in order to be able to use Ethernet together with these Sub-1 GHz RF expansion boards, you need to compile this driver with macro `SPIRIT1_SPI_MOSI=PB_5` defined, while the development board typically requires some HW modification as e.g. described [here](https://github.com/ARMmbed/sal-nanostack-driver-stm32-eth)!
rosarium 0:2ddc0583bcec 11
rosarium 0:2ddc0583bcec 12 This driver can be used together with the 6LoWPAN stack (*a.k.a.* Nanostack).