Revision 0:b706d6b7c1d3, committed 2016-09-12

Comitter:

mapellil

Date:

Mon Sep 12 11:49:48 2016 +0000

Child:

1:fc318750c574

Commit message:

First commit of 6180XA1 complex application example

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/X_NUCLEO_6180XA1.lib	Mon Sep 12 11:49:48 2016 +0000
@@ -0,0 +1,1 @@
+https://developer.mbed.org/teams/ST/code/X_NUCLEO_6180XA1/#229ea522cff8

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Sep 12 11:49:48 2016 +0000
@@ -0,0 +1,207 @@
+#include "mbed.h"
+#include "x_nucleo_6180xa1.h"
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <assert.h>
+
+/* This VL6180X Expansion board test application performs a range measurement and an als measurement in interrupt mode
+   on the onboard embedded top sensor. 
+   The board red slider select on the flight the measurement type as ALS or RANGE; the measured data is diplayed on the 
+   on bord 4digits display.
+
+   User Blue button allows to stop current measurement and the entire program releasing all the resources.
+   Reset button is used to restart the program. */
+
+/* Polling operating modes don`t require callback function that handles IRQ 
+   Callback IRQ functions are used only for measure that require interrupt */
+
+/* GetMeasurement is asynchronous! It returns NOT_READY if the measurement value 
+   is not ready to be read from the corresponding register. So you need to wait
+   for the result to be ready */
+
+#define VL6180X_I2C_SDA   D14 
+#define VL6180X_I2C_SCL   D15 
+
+#define RANGE   0
+#define ALS     1
+
+static X_NUCLEO_6180XA1 *board=NULL;
+MeasureData_t data_sensor_top;
+OperatingMode operating_mode, prev_operating_mode;
+    
+/* flags that handle interrupt request */
+bool int_sensor_top=false, int_stop_measure=false;  
+
+/* ISR callback function of the sensor_top */
+void SensorTopIRQ(void)
+{
+   int_sensor_top=true;
+   board->sensor_top->DisableInterruptMeasureDetectionIRQ();
+}   
+
+/* ISR callback function of the user blue button to stop program */
+void StopMeasureIRQ(void)
+{
+   int_stop_measure=true;
+}
+
+/* On board 4 digit local display refresh */
+void DisplayRefresh(OperatingMode op_mode)
+{   
+   char str[5];
+   
+   if(op_mode==range_continuous_interrupt || op_mode==range_continuous_polling)
+   {
+      if(data_sensor_top.range_mm!=0xFFFFFFFF)
+      {
+         sprintf(str,"%d",data_sensor_top.range_mm);
+      }
+      else
+      {
+         sprintf(str,"%s","----");
+      }
+   }
+   else if(op_mode==als_continuous_interrupt || op_mode==als_continuous_polling)
+   {
+      if(data_sensor_top.lux!=0xFFFFFFFF)
+      {
+         sprintf(str,"%d",data_sensor_top.lux);
+      }
+      else
+      {
+         sprintf(str,"%s","----");
+      }
+   }
+   board->display->DisplayString(str, strlen(str));       
+}
+
+/* On board red slider position check */
+enum OpModeIntPoll_t{ PollMeasure, IntMeasure };
+
+OperatingMode CheckSlider(enum OpModeIntPoll_t OpMode) {
+    
+OperatingMode ret;
+int measure= board->RdSwitch();
+
+   switch (OpMode) {
+    case PollMeasure:
+      if(measure==RANGE)
+        ret = range_continuous_polling;
+      else if(measure==ALS)
+        ret = als_continuous_polling;           
+    break;
+    
+    case IntMeasure:
+      if(measure==RANGE)
+        ret = range_continuous_interrupt;
+      else if(measure==ALS)
+        ret = als_continuous_interrupt;     
+    break;
+   }
+     return ret;      
+}
+
+/* Print on USB Serial the started OperatingMode */
+void PrintStartMessage(OperatingMode op_mode)
+{
+   if(op_mode==range_continuous_interrupt)
+      printf("\nStarted range continuous interrupt measure\n\r");
+   else if(prev_operating_mode==als_continuous_interrupt)
+      printf("\nStarted als continuous interrupt measure\n\r");
+}
+
+/* Print on USB Serial the stopped OperatingMode */
+void PrintStopMessage(OperatingMode op_mode)
+{
+   if(op_mode==range_continuous_interrupt)
+      printf("Stopped range continuous interrupt measure\n\r");
+   else if(prev_operating_mode==als_continuous_interrupt)
+      printf("Stopped als continuous interrupt measure\n\r");
+}
+
+/* Print on board 4 Digit display the indicated message <= 4 char */
+#define DELAY 2000  // 2Sec
+void DisplayMsg(const char * msg)
+{
+   Timer timer;
+   char str[5];
+   
+   timer.start();
+   for(int i=0; i<DELAY; i=timer.read_ms())
+   {
+      sprintf(str,"%s",msg);
+      board->display->DisplayString(str, strlen(str));
+   }
+   timer.stop();
+}
+
+
+void IntContinousALSorRangeMeasure (DevI2C *device_i2c) {
+   int status;   
+   /* creates the 6180XA1 expansion board singleton obj */
+   board=X_NUCLEO_6180XA1::Instance(device_i2c, A3, A2, D13, D2);
+   DisplayMsg  ("INT");
+   /* init the 6180XA1 expansion board with default values */
+   status=board->InitBoard();
+   if(status)
+      printf("Failed to init board!\n\r");   
+   /* check the red slider position for ALS/Range measure */
+   operating_mode=CheckSlider(IntMeasure);   
+   /* start the measure on sensor top */
+   status=board->sensor_top->StartMeasurement(operating_mode, SensorTopIRQ, NULL, NULL);
+   if(!status)
+   {
+      prev_operating_mode=operating_mode;
+      PrintStartMessage(operating_mode);
+      while(1)
+      {
+         if(int_sensor_top)  /* 6180 isr was triggered */
+         {
+            int_sensor_top=false;
+            status=board->sensor_top->HandleIRQ(operating_mode, &data_sensor_top); /* handle the isr and read the meaure */
+            DisplayRefresh(operating_mode);
+         }
+         if(int_stop_measure) /* Blue Button isr was triggered */
+         {
+            status=board->sensor_top->StopMeasurement(prev_operating_mode); /* stop the measure and exit */
+            if(!status)
+               PrintStopMessage(prev_operating_mode);
+            int_stop_measure = false;
+            printf("\nProgram stopped!\n\n\r");
+            break;
+         }
+         operating_mode=CheckSlider(IntMeasure); /* check if red slider was moved */
+         if(operating_mode!=prev_operating_mode)
+         {
+            DisplayRefresh(prev_operating_mode);
+            status=board->sensor_top->StopMeasurement(prev_operating_mode); /* stop the running measure */
+            if(!status)
+               PrintStopMessage(prev_operating_mode);
+            prev_operating_mode=operating_mode;
+            status=board->sensor_top->StartMeasurement(operating_mode, SensorTopIRQ, NULL, NULL); /* start the new measure */
+            if(!status)
+               PrintStartMessage(operating_mode);
+         } else
+            DisplayRefresh(operating_mode);           
+      }
+   }
+   DisplayMsg("BYE");
+}    
+
+/*=================================== Main ==================================
+ Move the VL6180X Expansion board red slider to switch between ALS or Range
+ measures.
+ Press the blue user button to stop the measurements in progress    
+=============================================================================*/
+int main()
+{   
+#if USER_BUTTON==PC_13  // we are cross compiling for Nucleo-f401 
+   InterruptIn stop_button (USER_BUTTON);
+   stop_button.rise (&StopMeasureIRQ);  
+#endif   
+   DevI2C *device_i2c =new DevI2C(VL6180X_I2C_SDA, VL6180X_I2C_SCL);     
+        
+   IntContinousALSorRangeMeasure (device_i2c);  // start continous measures Interrupt based
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Mon Sep 12 11:49:48 2016 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/2e9cc70d1897
\ No newline at end of file