Diff: main.cpp

Revision:

3:ff6e42401073

Parent:

2:a3bc0a0af780

Child:

4:3c5cc844a7e5

diff -r a3bc0a0af780 -r ff6e42401073 main.cpp
--- a/main.cpp	Mon Aug 07 15:38:43 2017 +0000
+++ b/main.cpp	Tue Aug 08 07:59:12 2017 +0000
@@ -7,63 +7,59 @@
 
 /* This VL53L0X Expansion board test application performs a range measurement in polling mode
    on the sensors. The demo supports the centre sensor and up to 2 satellites boards.
-   
-   The User Blue button controls the selected sensor. Measurements from this sensor are displayed 
+
+   The User Blue button controls the selected sensor. Measurements from this sensor are displayed
    on the 4-digit display.
    Data collected from all sensors is also sent on the com port.
-   
-   The Reset button is used to restart the program. 
+
+   The Reset button is used to restart the program.
  */
 
-#define VL53L0_I2C_SDA   D14 
-#define VL53L0_I2C_SCL   D15 
+#define VL53L0_I2C_SDA   D14
+#define VL53L0_I2C_SCL   D15
 
-static X_NUCLEO_53L0A1 *board=NULL;
+static X_NUCLEO_53L0A1 *board = NULL;
 VL53L0X_RangingMeasurementData_t data_sensor;
 OperatingMode operating_mode;
-    
+
 /* Current sensor number*/
 int currentSensor = 0;
-/* Installed sensors count */ 
-int sensorCnt = 0; 
+/* Installed sensors count */
+int sensorCnt = 0;
 
 /* array storing pointers to the sensors and their prefixes for the display purpouse*/
-struct Sensors
-{
+struct Sensors {
     char prefix;
     VL53L0X *sensorPtr;
 } installedSensors[3];
 
 int init_sensors_array()
 {
-   int status = 1;
-   /* start the measure on sensor top */
-   if (NULL != board->sensor_centre)
-   {
-       installedSensors[sensorCnt].prefix = 'C';
-       installedSensors[sensorCnt].sensorPtr = board->sensor_centre;
-       ++sensorCnt;
-       status=board->sensor_centre->start_measurement(operating_mode, NULL);
-   }
-   /* start the measure on sensor left if present */
-   if (NULL != board->sensor_left)
-   {
-        installedSensors[sensorCnt].prefix='L';
+    int status = 1;
+    /* start the measure on sensor top */
+    if (NULL != board->sensor_centre) {
+        installedSensors[sensorCnt].prefix = 'C';
+        installedSensors[sensorCnt].sensorPtr = board->sensor_centre;
+        ++sensorCnt;
+        status = board->sensor_centre->start_measurement(operating_mode, NULL);
+    }
+    /* start the measure on sensor left if present */
+    if (NULL != board->sensor_left) {
+        installedSensors[sensorCnt].prefix = 'L';
         installedSensors[sensorCnt].sensorPtr = board->sensor_left;
-        ++sensorCnt;    
-        status=board->sensor_left->start_measurement(operating_mode, NULL);
-   }
-   /* start the measure on sensor right if present */
-   if (NULL != board->sensor_right)
-   {
+        ++sensorCnt;
+        status = board->sensor_left->start_measurement(operating_mode, NULL);
+    }
+    /* start the measure on sensor right if present */
+    if (NULL != board->sensor_right) {
         installedSensors[sensorCnt].prefix = 'R';
         installedSensors[sensorCnt].sensorPtr = board->sensor_right;
         ++sensorCnt;
-        status=board->sensor_right->start_measurement(operating_mode, NULL);
-   }
-   /* set first displayed sensor to embedded top */
-   currentSensor = 0;
-   return status;
+        status = board->sensor_right->start_measurement(operating_mode, NULL);
+    }
+    /* set first displayed sensor to embedded top */
+    currentSensor = 0;
+    return status;
 }
 
 /* ISR callback function of the user blue button to switch measuring sensor. */
@@ -72,74 +68,67 @@
     ++currentSensor;
     if (currentSensor == sensorCnt)
         currentSensor = 0;
-    printf("Sensor changed to %c\r\n",installedSensors[currentSensor].prefix);
+    printf("Sensor changed to %c\r\n", installedSensors[currentSensor].prefix);
 }
 
 /* On board 4 digit local display refresh*/
 void display_refresh(OperatingMode op_mode)
-{   
-  char str[4];
-   
-  for (int t=0; t < sensorCnt; t++)
-  {
-     installedSensors[t].sensorPtr->get_measurement(op_mode, &data_sensor);
-     if (data_sensor.RangeStatus == 0) // we have a valid range.
-     {
-      printf("%c %4d; ", installedSensors[t].prefix,data_sensor.RangeMilliMeter);
-      if (currentSensor == t)
-      {
-          sprintf(str,"%c%3d", installedSensors[t].prefix ,data_sensor.RangeMilliMeter);
-      }
-     }
-     else
-     {
-      printf("%c ----; ", installedSensors[t].prefix);
-      if (currentSensor == t)
-      {
-       sprintf(str,"%c%s", installedSensors[t].prefix, "---");   
-      }
-     } 
-  }
-  printf("\r\n");
-  board->display->display_string(str);
+{
+    char str[4];
+
+    for (int t = 0; t < sensorCnt; t++) {
+        installedSensors[t].sensorPtr->get_measurement(op_mode, &data_sensor);
+        if (data_sensor.RangeStatus == 0) { // we have a valid range.
+            printf("%c %4d; ", installedSensors[t].prefix, data_sensor.RangeMilliMeter);
+            if (currentSensor == t) {
+                sprintf(str, "%c%3d", installedSensors[t].prefix, data_sensor.RangeMilliMeter);
+            }
+        } else {
+            printf("%c ----; ", installedSensors[t].prefix);
+            if (currentSensor == t) {
+                sprintf(str, "%c%s", installedSensors[t].prefix, "---");
+            }
+        }
+    }
+    printf("\r\n");
+    board->display->display_string(str);
 }
 
-void range_measure(DevI2C *device_i2c) {
-   int status;
+void range_measure(DevI2C *device_i2c)
+{
+    int status;
 
-   /* creates the 53L0A1 expansion board singleton obj */
-   board=X_NUCLEO_53L0A1::instance(device_i2c, A2, D8, D2);
-    
-   board->display->display_string("53L0");
-   /* init the 53L0A1 expansion board with default values */
-   status=board->init_board();
-   if(status)
-      printf("Failed to init board!\n\r");   
-   operating_mode=range_single_shot_polling;
+    /* creates the 53L0A1 expansion board singleton obj */
+    board = X_NUCLEO_53L0A1::instance(device_i2c, A2, D8, D2);
 
-   status = init_sensors_array();
-   
-   if(!status)
-   {
-      while(1)
-      {
-         display_refresh(operating_mode);
-      }
-   }
-   board->display->display_string("BYE");
-   delete board;        
-}    
+    board->display->display_string("53L0");
+    /* init the 53L0A1 expansion board with default values */
+    status = board->init_board();
+    if (status)
+        printf("Failed to init board!\n\r");
+    operating_mode = range_single_shot_polling;
+
+    status = init_sensors_array();
+
+    if (!status) {
+        while (1) {
+            display_refresh(operating_mode);
+        }
+    }
+    board->display->display_string("BYE");
+    delete board;
+}
 
 /*=================================== Main ==================================
- Press the blue user button to switch the sensor.    
+ Press the blue user button to switch the sensor.
 =============================================================================*/
 int main()
-{   
+{
 #if USER_BUTTON==PC_13  // we are cross compiling for Nucleo-f401 
-   InterruptIn stop_button (USER_BUTTON);
-   stop_button.rise (&switch_measuring_sensor_irq);
-#endif   
-   DevI2C *device_i2c =new DevI2C(VL53L0_I2C_SDA, VL53L0_I2C_SCL);        
-   range_measure(device_i2c);  // start continuous measures
+    InterruptIn stop_button(USER_BUTTON);
+    stop_button.rise(&switch_measuring_sensor_irq);
+#endif
+    DevI2C *device_i2c = new DevI2C(VL53L0_I2C_SDA, VL53L0_I2C_SCL);
+    range_measure(device_i2c);  // start continuous measures
 }