ST / Mbed 2 deprecated BLE_HeartRate_IDB0XA1

Heart Rate Monitor example for the BLE API using ST BlueNRG native drivers

Dependencies:   BLE_API X_NUCLEO_IDB0XA1 mbed

Getting started with X-NUCLEO-IDB05A1

This example demonstrates how to use the X-NUCLEO-IDB05A1 component with one of the STM32 Nucleo platforms tested with the to obtain heart rate information:

First, attach the X-NUCLEO-IDB05A1 to the STM32 Nucleo platform as shown here: /media/uploads/apalmieri/nucleoble.jpg

Next, connect the STM32 Nucleo platform to your PC with a USB-mini USB cable.

Now return to the BLE_HeartRate_IDB0XA1 project homepage and import the project into your mbed compiler:

/media/uploads/apalmieri/homepage.jpg

Click “Import” button on the pop up window shown below

/media/uploads/apalmieri/import.jpg

Compile and load the image onto the STM32 Nucleo platform

Upon a successful compilation, a binary image will be created and a dialog box will ask you where to save it.

/media/uploads/apalmieri/xsaveimage.jpg

Now you can load the compiled code onto your Nucleo platform by saving the newly created binary file to your STM32 Nucleo drive.

Open a terminal window to display the status of your Bluetooth stack. For this example, set the terminal BAUD rate to 9600

Note

Included within the USB interface of the STM32 Nucleo platform is a Virtual COM port that can be used to send back messages to your PC within your embedded code.
You need a terminal emulator installed on your PC to perform serial communications with your STM32 Nucleo platform. If you do not have a terminal emulation program on your PC we recommend you download and install one of the following terminal emulation programs:

Upon a successful serial connection, you should now see the various Bluetooth stack status displayed on your console output.

/media/uploads/apalmieri/xteraterm.png

Test your application with an Android or iOS device

/media/uploads/apalmieri/1.splashscreen_800x1280.png

  • On the STM32 BLE Profiles app select HeartRateSensor

/media/uploads/apalmieri/2.scanningdevice_800x1280.png

  • Select Heart Rate

/media/uploads/apalmieri/3.profileselection_800x1280.png /media/uploads/apalmieri/7.heartrate_800x1280.png

Revisions of X_NUCLEO_IDB0XA1.lib

Revision Date Message Actions
20:60d60ccf8eea 2016-09-16 Sync w/ X_NUCLEO_IDB0XA1 (rev307) lib File  Diff  Annotate
19:2fdc7548ff86 2016-09-16 Sync w/ X_NUCLEO_IDB0XA1 (rev306) lib File  Diff  Annotate
18:df01918a6a79 2016-09-15 Sync w/ mbed (rev125) BLE_API (rev1208) and X_NUCLEO_IDB0XA1 (rev305) libs File  Diff  Annotate
17:244d790264bc 2016-06-21 Sync w/ X_NUCLEO_IDB0XA1 (rev250) lib File  Diff  Annotate
16:4913ab140f63 2016-06-21 Sync w/ mbed (rev121) BLE_API (rev1200) and X_NUCLEO_IDB0XA1 (rev248) libs File  Diff  Annotate
15:9903a83938cc 2016-03-22 Sync w/ rev215 of X_NUCLEO_IDB0XA1 lib and rev116 of mbed lib File  Diff  Annotate
11:3634e1f4603b 2016-01-14 Sync w/ BLE_API (rev 1130) X_NUCLEO_IDB0XA1 (rev 212) and mbed (rev 112) File  Diff  Annotate
9:067852e3291b 2015-12-15 Sync w/ BLE_API (rev 1041) and X_NUCLEO_IDB0XA1 (rev 209) File  Diff  Annotate
8:f97c7364563a 2015-12-07 Sync w/ rev 205 of X_NUCLEO_IDB0XA1 lib File  Diff  Annotate
7:de3068507610 2015-12-03 Sync w/ rev 203 of X_NUCLEO_IDB0XA1 and rev 1016 of BLE_API (v2.1.7) File  Diff  Annotate
5:9cbe05641210 2015-11-20 Sync w/ rev 191 of X_NUCLEO_IDB0XA1 lib File  Diff  Annotate
4:f7b728bd74a5 2015-11-18 Sync with BLE_API (rev 883) X_NUCLEO_IDB0XA1 (rev 180) mbed (rev 109) File  Diff  Annotate
3:a51ca6313ad2 2015-09-29 Remove 'IDB0XA1_D13_PATCH' from main File  Diff  Annotate
0:eb7f02ad28a7 2015-09-22 Initial revision File  Diff  Annotate