ST Expansion SW Team / Mbed OS mbed-os-nfc05a1

Example application for the STMicroelectronics X-NUCLEO-NFC05A1

Dependencies:   RFAL ST25R3911 BSP05

X-NUCLEO-NFC05A1 NFC Card Reader Expansion Board Firmware Package

Introduction

This firmware package includes Components Device Drivers, Board Support Package and example applications for STMicroelectronics X-NUCLEO-NFC05A1 NFC Card Reader Expansion Board based on the ST25R3911B.

Example Application

This program gives the user the possibility to read the URI information written on the expansion board. The LEDs will blink for few seconds to indicate that the board is initializing. As soon as it finishes, the device is ready to communicate with external NFC devices. LED6 will blink until an NFC device is close to it and ready to read the URI value.

Tested Platforms

This firmware has been tested on STM32 NUCLEO-F401RE

source/main.h

Committer:
DiegoOstuni
Date:
2019-11-14
Revision:
3:9a152c93d7a2
Parent:
1:86504e1ac6b1

File content as of revision 3:9a152c93d7a2:

/**
  ******************************************************************************
  * File Name          : main.h
  * Description        : This file contains the common defines of the application
  ******************************************************************************
  *
  * COPYRIGHT(c) 2017 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

  /*! \file
 *
 *  \author
 *
 *  \brief This file contains the common defines of the application.
 *
 */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __MAIN_H
#define __MAIN_H
  /* Includes ------------------------------------------------------------------*/

/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private define ------------------------------------------------------------*/

#define B1_Pin GPIO_PIN_13
#define B1_GPIO_Port GPIOC
#define IRQ_3911_Pin GPIO_PIN_0
#define IRQ_3911_GPIO_Port GPIOA
#define LED_F_Pin GPIO_PIN_1
#define LED_F_GPIO_Port GPIOA
#define LED_B_Pin GPIO_PIN_4
#define LED_B_GPIO_Port GPIOA
#define LED_A_Pin GPIO_PIN_0
#define LED_A_GPIO_Port GPIOB
#define LED_FIELD_Pin GPIO_PIN_8
#define LED_FIELD_GPIO_Port GPIOA
#define TMS_Pin GPIO_PIN_13
#define TMS_GPIO_Port GPIOA
#define TCK_Pin GPIO_PIN_14
#define TCK_GPIO_Port GPIOA
#define SWO_Pin GPIO_PIN_3
#define SWO_GPIO_Port GPIOB
#define LED_V_Pin GPIO_PIN_4
#define LED_V_GPIO_Port GPIOB
#define LED_AP2P_Pin GPIO_PIN_5
#define LED_AP2P_GPIO_Port GPIOB
#define SPI1_CS_Pin GPIO_PIN_6
#define SPI1_CS_GPIO_Port GPIOB
/* USER CODE BEGIN Private defines */

/* USER CODE END Private defines */

/**
  * @}
  */

/**
  * @}
*/

#endif /* __MAIN_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/