File content as of revision 13:3f1b341901dd:

/*******************************************************************************
 Copyright (C) 2016, STMicroelectronics International N.V.
 All rights reserved.

 Redistribution and use in source and binary forms, with or without
 modification, are permitted provided that the following conditions are met:
 * Redistributions of source code must retain the above copyright
 notice, this list of conditions and the following disclaimer.
 * Redistributions in binary form must reproduce the above copyright
 notice, this list of conditions and the following disclaimer in the
 documentation and/or other materials provided with the distribution.
 * Neither the name of STMicroelectronics nor the
 names of its contributors may be used to endorse or promote products
 derived from this software without specific prior written permission.

 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND
 NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS ARE DISCLAIMED.
 IN NO EVENT SHALL STMICROELECTRONICS INTERNATIONAL N.V. BE LIABLE FOR ANY
 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 ******************************************************************************/


#ifndef _VL53L1_PLATFORM_H_
#define _VL53L1_PLATFORM_H_

#include "vl53l1_ll_def.h"
#include "vl53l1_platform_log.h"

#define VL53L1_IPP_API
#include "vl53l1_platform_ipp_imports.h"
#include "vl53l1_platform_user_data.h"

#ifdef __cplusplus
extern "C"
{
#endif

/**
 * @file   vl53l1_platform.h
 *
 * @brief  All end user OS/platform/application porting
 */



/**
 * @brief  Initialise platform comms.
 *
 * @param[in]   pdev            : pointer to device structure (device handle)
 * @param[in]   comms_type      : selects between I2C and SPI
 * @param[in]   comms_speed_khz : unsigned short containing the I2C speed in kHz
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_CommsInitialise(
	VL53L1_Dev_t *pdev,
	uint8_t       comms_type,
	uint16_t      comms_speed_khz);


/**
 * @brief  Close platform comms.
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_CommsClose(
	VL53L1_Dev_t *pdev);


/**
 * @brief Writes the supplied byte buffer to the device
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[in]   pdata     : pointer to uint8_t (byte) buffer containing the data to be written
 * @param[in]   count     : number of bytes in the supplied byte buffer
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WriteMulti(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint8_t      *pdata,
		uint32_t      count);


/**
 * @brief  Reads the requested number of bytes from the device
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[out]  pdata     : pointer to the uint8_t (byte) buffer to store read data
 * @param[in]   count     : number of bytes to read
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_ReadMulti(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint8_t      *pdata,
		uint32_t      count);


/**
 * @brief  Writes a single byte to the device
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[in]   data      : uint8_t data value to write
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WrByte(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint8_t       data);


/**
 * @brief  Writes a single word (16-bit unsigned) to the device
 *
 * Manages the big-endian nature of the device register map
 * (first byte written is the MS byte).
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[in]   data      : uin16_t data value write
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WrWord(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint16_t      data);


/**
 * @brief  Writes a single dword (32-bit unsigned) to the device
 *
 * Manages the big-endian nature of the device register map
 * (first byte written is the MS byte).
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[in]   data      : uint32_t data value to write
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WrDWord(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint32_t      data);



/**
 * @brief  Reads a single byte from the device
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index
 * @param[out]  pdata     : pointer to uint8_t data value
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 *
 */

VL53L1_Error VL53L1_RdByte(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint8_t      *pdata);


/**
 * @brief  Reads a single word (16-bit unsigned) from the device
 *
 * Manages the big-endian nature of the device (first byte read is the MS byte).
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[out]  pdata     : pointer to uint16_t data value
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_RdWord(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint16_t     *pdata);


/**
 * @brief  Reads a single dword (32-bit unsigned) from the device
 *
 * Manages the big-endian nature of the device (first byte read is the MS byte).
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   index     : uint16_t register index value
 * @param[out]  pdata     : pointer to uint32_t data value
 *
 * @return   VL53L1_ERROR_NONE    Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_RdDWord(
		VL53L1_Dev_t *pdev,
		uint16_t      index,
		uint32_t     *pdata);



/**
 * @brief  Implements a programmable wait in us
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   wait_us   : integer wait in micro seconds
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WaitUs(
		VL53L1_Dev_t *pdev,
		int32_t       wait_us);


/**
 * @brief  Implements a programmable wait in ms
 *
 * @param[in]   pdev      : pointer to device structure (device handle)
 * @param[in]   wait_ms   : integer wait in milliseconds
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WaitMs(
		VL53L1_Dev_t *pdev,
		int32_t       wait_ms);


/**
* @brief Get the frequency of the timer used for ranging results time stamps
*
* @param[out] ptimer_freq_hz : pointer for timer frequency
*
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
*/

VL53L1_Error VL53L1_GetTimerFrequency(int32_t *ptimer_freq_hz);

/**
* @brief Get the timer value in units of timer_freq_hz (see VL53L1_get_timestamp_frequency())
*
* @param[out] ptimer_count : pointer for timer count value
*
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
*/

VL53L1_Error VL53L1_GetTimerValue(int32_t *ptimer_count);


/**
 * @brief Set the mode of a specified GPIO pin
 *
 * @param  pin - an identifier specifying the pin being modified - defined per platform
 *
 * @param  mode - an identifier specifying the requested mode - defined per platform
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GpioSetMode(uint8_t pin, uint8_t mode);


/**
 * @brief Set the value of a specified GPIO pin
 *
 * @param  pin - an identifier specifying the pin being modified - defined per platform
 *
 * @param  value - a value to set on the GPIO pin - typically 0 or 1
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GpioSetValue(uint8_t pin, uint8_t value);


/**
 * @brief Get the value of a specified GPIO pin
 *
 * @param  pin - an identifier specifying the pin being modified - defined per platform
 *
 * @param  pvalue - a value retrieved from the GPIO pin - typically 0 or 1
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GpioGetValue(uint8_t pin, uint8_t *pvalue);


/**
 * @brief Sets and clears the XShutdown pin on the Ewok
 *
 * @param  value - the value for xshutdown - 0 = in reset, 1 = operational
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GpioXshutdown(uint8_t value);


/**
 * @brief Sets and clears the Comms Mode pin (NCS) on the Ewok
 *
 * @param  value - the value for comms select - 0 = I2C, 1 = SPI
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GpioCommsSelect(uint8_t value);


/**
 * @brief Enables and disables the power to the Ewok module
 *
 * @param  value - the state of the power supply - 0 = power off, 1 = power on
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GpioPowerEnable(uint8_t value);

/**
 * @brief Enables callbacks to the supplied funtion pointer when Ewok interrupts ocurr
 *
 * @param  function - a function callback supplies by the caller, for interrupt notification
 * @param  edge_type - falling edge or rising edge interrupt detection
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error  VL53L1_GpioInterruptEnable(void (*function)(void), uint8_t edge_type);


/**
 * @brief Disables the callback on Ewok interrupts
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error  VL53L1_GpioInterruptDisable(void);


/*
 * @brief Gets current system tick count in [ms]
 *
 * @return  time_ms : current time in [ms]
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_GetTickCount(
	uint32_t *ptime_ms);


/**
 * @brief Register "wait for value" polling routine
 *
 * Port of the V2WReg Script function  WaitValueMaskEx()
 *
 * @param[in]   pdev          : pointer to device structure (device handle)
 * @param[in]   timeout_ms    : timeout in [ms]
 * @param[in]   index         : uint16_t register index value
 * @param[in]   value         : value to wait for
 * @param[in]   mask          : mask to be applied before comparison with value
 * @param[in]   poll_delay_ms : polling delay been each read transaction in [ms]
 *
 * @return  VL53L1_ERROR_NONE     Success
 * @return  "Other error code"    See ::VL53L1_Error
 */

VL53L1_Error VL53L1_WaitValueMaskEx(
		VL53L1_Dev_t *pdev,
		uint32_t      timeout_ms,
		uint16_t      index,
		uint8_t       value,
		uint8_t       mask,
		uint32_t      poll_delay_ms);

#ifdef __cplusplus
}
#endif

#endif