ST Expansion SW Team
RFAL library for the STMicroelectronics X-NUCLEO-NFC05A1
Diff: rfal_analogConfigTbl.h
- Revision:
- 0:75fc82583a41
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/rfal_analogConfigTbl.h Thu Nov 14 14:34:50 2019 +0000
@@ -0,0 +1,416 @@
+
+/******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT 2016 STMicroelectronics</center></h2>
+ *
+ * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/myliberty
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
+ * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+******************************************************************************/
+
+/*
+ * PROJECT: ST25R391x firmware
+ * $Revision: $
+ * LANGUAGE: ISO C99
+ */
+
+/*! \file rfal_analogConfig.h
+ *
+ * \author bkam
+ *
+ * \brief ST25R3911 Analog Configuration Settings
+ *
+ */
+
+#ifndef ST25R3911_ANALOGCONFIG_H
+#define ST25R3911_ANALOGCONFIG_H
+
+/*
+ ******************************************************************************
+ * INCLUDES
+ ******************************************************************************
+ */
+#include "rfal_AnalogConfig.h"
+#include "st25r3911_com.h"
+
+/*
+ ******************************************************************************
+ * DEFINES
+ ******************************************************************************
+ */
+
+/*
+ ******************************************************************************
+ * GLOBAL MACROS
+ ******************************************************************************
+ */
+
+/*! Macro for Configuration Setting with only one register-mask-value set:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1] */
+#define MODE_ENTRY_1_REG(MODE, R0, M0, V0) \
+ (MODE >> 8), (MODE & 0xFF), 1, (R0 >> 8), (R0 & 0xFF), (M0), (V0)
+
+/*! Macro for Configuration Setting with only two register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1] */
+#define MODE_ENTRY_2_REG(MODE, R0, M0, V0, R1, M1, V1) \
+ (MODE >> 8), (MODE & 0xFF), 2, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1)
+
+/*! Macro for Configuration Setting with only three register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_3_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2) \
+ (MODE >> 8), (MODE & 0xFF), 3, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+
+/*! Macro for Configuration Setting with only four register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_4_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3) \
+ (MODE >> 8), (MODE & 0xFF), 4, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+
+/*! Macro for Configuration Setting with only five register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_5_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4) \
+ (MODE >> 8), (MODE & 0xFF), 5, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+
+/*! Macro for Configuration Setting with only six register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_6_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5) \
+ (MODE >> 8), (MODE & 0xFF), 6, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+
+/*! Macro for Configuration Setting with only seven register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_7_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6) \
+ (MODE >> 8), (MODE & 0xFF), 7, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+
+/*! Macro for Configuration Setting with only eight register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_8_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7) \
+ (MODE >> 8), (MODE & 0xFF), 8, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+ , (R7 >> 8), (R7 & 0xFF), (M7), (V7) \
+
+/*! Macro for Configuration Setting with only nine register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_9_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8) \
+ (MODE >> 8), (MODE & 0xFF), 9, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+ , (R7 >> 8), (R7 & 0xFF), (M7), (V7) \
+ , (R8 >> 8), (R8 & 0xFF), (M8), (V8) \
+
+/*! Macro for Configuration Setting with only ten register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_10_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9) \
+ (MODE >> 8), (MODE & 0xFF),10, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+ , (R7 >> 8), (R7 & 0xFF), (M7), (V7) \
+ , (R8 >> 8), (R8 & 0xFF), (M8), (V8) \
+ , (R9 >> 8), (R9 & 0xFF), (M9), (V9) \
+
+/*! Macro for Configuration Setting with eleven register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_11_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10) \
+ (MODE >> 8), (MODE & 0xFF),11, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+ , (R7 >> 8), (R7 & 0xFF), (M7), (V7) \
+ , (R8 >> 8), (R8 & 0xFF), (M8), (V8) \
+ , (R9 >> 8), (R9 & 0xFF), (M9), (V9) \
+ , (R10 >> 8), (R10 & 0xFF), (M10), (V10) \
+
+/*! Macro for Configuration Setting with twelve register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_12_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11) \
+ (MODE >> 8), (MODE & 0xFF),12, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+ , (R7 >> 8), (R7 & 0xFF), (M7), (V7) \
+ , (R8 >> 8), (R8 & 0xFF), (M8), (V8) \
+ , (R9 >> 8), (R9 & 0xFF), (M9), (V9) \
+ , (R10 >> 8), (R10 & 0xFF), (M10), (V10) \
+ , (R11 >> 8), (R11 & 0xFF), (M11), (V11) \
+
+/*! Macro for Configuration Setting with thirteen register-mask-value sets:
+ * - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
+#define MODE_ENTRY_13_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12) \
+ (MODE >> 8), (MODE & 0xFF),13, (R0 >> 8), (R0 & 0xFF), (M0), (V0) \
+ , (R1 >> 8), (R1 & 0xFF), (M1), (V1) \
+ , (R2 >> 8), (R2 & 0xFF), (M2), (V2) \
+ , (R3 >> 8), (R3 & 0xFF), (M3), (V3) \
+ , (R4 >> 8), (R4 & 0xFF), (M4), (V4) \
+ , (R5 >> 8), (R5 & 0xFF), (M5), (V5) \
+ , (R6 >> 8), (R6 & 0xFF), (M6), (V6) \
+ , (R7 >> 8), (R7 & 0xFF), (M7), (V7) \
+ , (R8 >> 8), (R8 & 0xFF), (M8), (V8) \
+ , (R9 >> 8), (R9 & 0xFF), (M9), (V9) \
+ , (R10 >> 8), (R10 & 0xFF), (M10), (V10) \
+ , (R11 >> 8), (R11 & 0xFF), (M11), (V11) \
+ , (R12 >> 8), (R12 & 0xFF), (M12), (V12) \
+/* Setting for approximately 14%: */
+#define AM_MOD_DRIVER_LEVEL_DEFAULT 0xb9
+/*
+ ******************************************************************************
+ * GLOBAL DATA TYPES
+ ******************************************************************************
+ */
+const uint8_t rfalAnalogConfigDefaultSettings[] = {
+ /****** Default Analog Configuration for Chip-Specific. ******/
+ MODE_ENTRY_10_REG( RFAL_ANALOG_CONFIG_TECH_CHIP
+ , ST25R3911_REG_OP_CONTROL, 0x30, 0x10 /* default to AM */
+ , ST25R3911_REG_IO_CONF1, 0x06, 0x06 /* MCUCLK: HF clk off */
+ , ST25R3911_REG_IO_CONF1, ST25R3911_REG_IO_CONF1_lf_clk_off, ST25R3911_REG_IO_CONF1_lf_clk_off /* MCUCLK: LF clk off */
+ , ST25R3911_REG_IO_CONF2, 0x18, 0x18 /* pull downs */
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_pm, 0x1<<ST25R3911_REG_RX_CONF4_shift_rg2_pm /* increase digitizer window for PM */
+ , ST25R3911_REG_ANT_CAL_TARGET, 0xFF, 0x80 /* 90degrees */
+ , ST25R3911_REG_ANT_CAL_CONTROL, 0xF8, 0x00 /* trim value from calibrate antenna */
+ , ST25R3911_REG_AM_MOD_DEPTH_CONTROL, ST25R3911_REG_AM_MOD_DEPTH_CONTROL_am_s, ST25R3911_REG_AM_MOD_DEPTH_CONTROL_am_s /* AM modulated level is defined by RFO AM Modulated Level Def Reg, fixed setting, no automatic adjustment */
+ , ST25R3911_REG_FIELD_THRESHOLD, ST25R3911_REG_FIELD_THRESHOLD_mask_trg, ST25R3911_REG_FIELD_THRESHOLD_trg_75mV
+ , ST25R3911_REG_FIELD_THRESHOLD, ST25R3911_REG_FIELD_THRESHOLD_mask_rfe, ST25R3911_REG_FIELD_THRESHOLD_rfe_75mV
+ )
+
+ /****** Default Analog Configuration for Poll NFC-A Tx. ******/
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, 0xf0 /* Used for 848 TX: very high AM to keep wave shapes */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
+ )
+
+ , MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM! */
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, 0xf0 /* Used for 848 TX: very high AM to keep wave shapes */
+ )
+
+ /****** Default Analog Configuration for Poll NFC-A Rx. ******/
+ , MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, 0xff, 0x18
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x2<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, 0x00 /* rx_tol Off */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x00
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x04
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x22
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x22
+ )
+
+ /****** Default Analog Configuration for Poll NFC-B Tx. ******/
+ , MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
+ )
+
+ /****** Default Analog Configuration for Poll NFC-B Rx. ******/
+ , MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, 0xff, 0x18
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x04
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x04
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x22
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x22
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_1695 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x6c
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_3390 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x6c
+ )
+
+ /****** Default Analog Configuration for Poll NFC-F Tx. ******/
+ , MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
+ )
+
+ /****** Default Analog Configuration for Poll NFC-F Common bitrate Rx. ******/
+ , MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, 0xff, 0x18
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x13 /* dev. from data sheet: lp 300kKz */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x0b /* dev. from data sheet: lp 600kHz */
+ )
+
+ /****** Default Analog Configuration for Poll NFC-V Common bitrate Tx ******/
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00
+ )
+
+ /****** Default Analog Configuration for Poll NFC-V Common bitrate Rx ******/
+ , MODE_ENTRY_4_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x0c /* use filter settings from table 9: "Recommended for 424/484 kHz sub-carrier" */
+ , ST25R3911_REG_RX_CONF3, 0xff, 0x18
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
+ )
+
+ /****** Default Analog Configuration for Poll AP2P Common bitrate Tx. ******/
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
+ )
+
+ , MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
+ )
+
+ , MODE_ENTRY_2_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
+ )
+
+ /****** Default Analog Configuration for Poll AP2P Common bitrate Rx. ******/
+ , MODE_ENTRY_4_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x45
+ , ST25R3911_REG_RX_CONF3, (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc), (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_rx_tol, ST25R3911_REG_AUX_rx_tol /* rx_tol On as default */
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0xc0
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
+ )
+
+ /****** Default Analog Configuration for Listen AP2P Common bitrate Tx. ******/
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_RFO_AM_ON_LEVEL, 0xff, AM_MOD_DRIVER_LEVEL_DEFAULT /* Fixed driver for AM level: ~14% */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, 0x00 /* OOK */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
+ , ST25R3911_REG_AUX, ST25R3911_REG_AUX_tr_am, ST25R3911_REG_AUX_tr_am /* AM */
+ )
+
+ /****** Default Analog Configuration for Listen AP2P Common bitrate Rx. ******/
+ , MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF1, 0x7f, 0x45
+ , ST25R3911_REG_RX_CONF3, (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc), (ST25R3911_REG_RX_CONF3_lim | ST25R3911_REG_RX_CONF3_rg_nfc)
+ , ST25R3911_REG_RX_CONF4, ST25R3911_REG_RX_CONF4_mask_rg2_am, 0x1<<ST25R3911_REG_RX_CONF4_shift_rg2_am /* increase digitizer window for AM */
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0xc0
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
+ )
+
+ , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
+ , ST25R3911_REG_RX_CONF3, ST25R3911_REG_RX_CONF3_mask_rg1_am, 0x00
+ )
+};
+
+#endif /* ST25R3911_ANALOGCONFIG_H */